Implement Ceph backend for Glance / Cinder / Nova
The new lib installs a full Ceph cluster. It can be managed by the service init scripts. Ceph can also be installed in standalone without any other components. This implementation adds the auto-configuration for the following services with Ceph: * Glance * Cinder * Cinder backup * Nova To enable Ceph simply add: ENABLED_SERVICES+=,ceph to your localrc. If you want to play with the Ceph replication, you can use the CEPH_REPLICAS option and set a replica. This replica will be used for every pools (Glance, Cinder, Cinder backup and Nova). The size of the loopback disk used for Ceph can also be managed thanks to the CEPH_LOOPBACK_DISK_SIZE option. Going further pools, users and PGs are configurable as well. The convention is <SERVICE_NAME_IN_CAPITAL>_CEPH_<OPTION> where services are GLANCE, CINDER, NOVA, CINDER_BAK. Let's take the example of Cinder: * CINDER_CEPH_POOL * CINDER_CEPH_USER * CINDER_CEPH_POOL_PG * CINDER_CEPH_POOL_PGP ** Only works on Ubuntu Trusty, Fedora 19/20 or later ** Change-Id: Ifec850ba8e1e5263234ef428669150c76cfdb6ad Implements: blueprint implement-ceph-backend Signed-off-by: Sébastien Han <sebastien.han@enovance.com>
This commit is contained in:
Sébastien Han
parent
097183356e
commit
36f2f024db
44
extras.d/60-ceph.sh
Normal file
44
extras.d/60-ceph.sh
Normal file
@ -0,0 +1,44 @@
|
||||
# ceph.sh - DevStack extras script to install Ceph
|
||||
|
||||
if is_service_enabled ceph; then
|
||||
if [[ "$1" == "source" ]]; then
|
||||
# Initial source
|
||||
source $TOP_DIR/lib/ceph
|
||||
elif [[ "$1" == "stack" && "$2" == "pre-install" ]]; then
|
||||
echo_summary "Installing Ceph"
|
||||
install_ceph
|
||||
echo_summary "Configuring Ceph"
|
||||
configure_ceph
|
||||
# NOTE (leseb): Do everything here because we need to have Ceph started before the main
|
||||
# OpenStack components. Ceph OSD must start here otherwise we can't upload any images.
|
||||
echo_summary "Initializing Ceph"
|
||||
init_ceph
|
||||
start_ceph
|
||||
elif [[ "$1" == "stack" && "$2" == "post-config" ]]; then
|
||||
if is_service_enabled glance; then
|
||||
echo_summary "Configuring Glance for Ceph"
|
||||
configure_ceph_glance
|
||||
fi
|
||||
if is_service_enabled nova; then
|
||||
echo_summary "Configuring Nova for Ceph"
|
||||
configure_ceph_nova
|
||||
fi
|
||||
if is_service_enabled cinder; then
|
||||
echo_summary "Configuring Cinder for Ceph"
|
||||
configure_ceph_cinder
|
||||
# NOTE (leseb): the part below is a requirement from Cinder in order to attach volumes
|
||||
# so we should run the following within the if statement.
|
||||
echo_summary "Configuring libvirt secret"
|
||||
import_libvirt_secret_ceph
|
||||
fi
|
||||
fi
|
||||
|
||||
if [[ "$1" == "unstack" ]]; then
|
||||
stop_ceph
|
||||
cleanup_ceph
|
||||
fi
|
||||
|
||||
if [[ "$1" == "clean" ]]; then
|
||||
cleanup_ceph
|
||||
fi
|
||||
fi
|
||||
2
files/apts/ceph
Normal file
2
files/apts/ceph
Normal file
@ -0,0 +1,2 @@
|
||||
ceph # NOPRIME
|
||||
xfsprogs
|
||||
3
files/rpms-suse/ceph
Normal file
3
files/rpms-suse/ceph
Normal file
@ -0,0 +1,3 @@
|
||||
ceph # NOPRIME
|
||||
xfsprogs
|
||||
lsb
|
||||
3
files/rpms/ceph
Normal file
3
files/rpms/ceph
Normal file
@ -0,0 +1,3 @@
|
||||
ceph # NOPRIME
|
||||
xfsprogs
|
||||
redhat-lsb-core
|
||||
34
functions
34
functions
@ -546,6 +546,40 @@ if ! function_exists echo_nolog; then
|
||||
}
|
||||
fi
|
||||
|
||||
|
||||
# create_disk - Create backing disk
|
||||
function create_disk {
|
||||
local node_number
|
||||
local disk_image=${1}
|
||||
local storage_data_dir=${2}
|
||||
local loopback_disk_size=${3}
|
||||
|
||||
# Create a loopback disk and format it to XFS.
|
||||
if [[ -e ${disk_image} ]]; then
|
||||
if egrep -q ${storage_data_dir} /proc/mounts; then
|
||||
sudo umount ${storage_data_dir}/drives/sdb1
|
||||
sudo rm -f ${disk_image}
|
||||
fi
|
||||
fi
|
||||
|
||||
sudo mkdir -p ${storage_data_dir}/drives/images
|
||||
|
||||
sudo truncate -s ${loopback_disk_size} ${disk_image}
|
||||
|
||||
# Make a fresh XFS filesystem. Use bigger inodes so xattr can fit in
|
||||
# a single inode. Keeping the default inode size (256) will result in multiple
|
||||
# inodes being used to store xattr. Retrieving the xattr will be slower
|
||||
# since we have to read multiple inodes. This statement is true for both
|
||||
# Swift and Ceph.
|
||||
sudo mkfs.xfs -f -i size=1024 ${disk_image}
|
||||
|
||||
# Mount the disk with mount options to make it as efficient as possible
|
||||
if ! egrep -q ${storage_data_dir} /proc/mounts; then
|
||||
sudo mount -t xfs -o loop,noatime,nodiratime,nobarrier,logbufs=8 \
|
||||
${disk_image} ${storage_data_dir}
|
||||
fi
|
||||
}
|
||||
|
||||
# Restore xtrace
|
||||
$XTRACE
|
||||
|
||||
|
||||
286
lib/ceph
Normal file
286
lib/ceph
Normal file
@ -0,0 +1,286 @@
|
||||
# lib/ceph
|
||||
# Functions to control the configuration and operation of the **Ceph** storage service
|
||||
|
||||
# Dependencies:
|
||||
#
|
||||
# - ``functions`` file
|
||||
# - ``CEPH_DATA_DIR`` or ``DATA_DIR`` must be defined
|
||||
|
||||
# ``stack.sh`` calls the entry points in this order (via ``extras.d/60-ceph.sh``):
|
||||
#
|
||||
# - install_ceph
|
||||
# - configure_ceph
|
||||
# - init_ceph
|
||||
# - start_ceph
|
||||
# - stop_ceph
|
||||
# - cleanup_ceph
|
||||
|
||||
# Save trace setting
|
||||
XTRACE=$(set +o | grep xtrace)
|
||||
set +o xtrace
|
||||
|
||||
|
||||
# Defaults
|
||||
# --------
|
||||
|
||||
# Set ``CEPH_DATA_DIR`` to the location of Ceph drives and objects.
|
||||
# Default is the common DevStack data directory.
|
||||
CEPH_DATA_DIR=${CEPH_DATA_DIR:-/var/lib/ceph}
|
||||
CEPH_DISK_IMAGE=${CEPH_DATA_DIR}/drives/images/ceph.img
|
||||
|
||||
# Set ``CEPH_CONF_DIR`` to the location of the configuration files.
|
||||
# Default is ``/etc/ceph``.
|
||||
CEPH_CONF_DIR=${CEPH_CONF_DIR:-/etc/ceph}
|
||||
|
||||
# DevStack will create a loop-back disk formatted as XFS to store the
|
||||
# Ceph data. Set ``CEPH_LOOPBACK_DISK_SIZE`` to the disk size in
|
||||
# kilobytes.
|
||||
# Default is 1 gigabyte.
|
||||
CEPH_LOOPBACK_DISK_SIZE_DEFAULT=2G
|
||||
CEPH_LOOPBACK_DISK_SIZE=${CEPH_LOOPBACK_DISK_SIZE:-$CEPH_LOOPBACK_DISK_SIZE_DEFAULT}
|
||||
|
||||
# Common
|
||||
CEPH_FSID=$(uuidgen)
|
||||
CEPH_CONF_FILE=${CEPH_CONF_DIR}/ceph.conf
|
||||
|
||||
# Glance
|
||||
GLANCE_CEPH_USER=${GLANCE_CEPH_USER:-glance}
|
||||
GLANCE_CEPH_POOL=${GLANCE_CEPH_POOL:-images}
|
||||
GLANCE_CEPH_POOL_PG=${GLANCE_CEPH_POOL_PG:-8}
|
||||
GLANCE_CEPH_POOL_PGP=${GLANCE_CEPH_POOL_PGP:-8}
|
||||
|
||||
# Nova
|
||||
NOVA_CEPH_POOL=${NOVA_CEPH_POOL:-vms}
|
||||
NOVA_CEPH_POOL_PG=${NOVA_CEPH_POOL_PG:-8}
|
||||
NOVA_CEPH_POOL_PGP=${NOVA_CEPH_POOL_PGP:-8}
|
||||
|
||||
# Cinder
|
||||
CINDER_CEPH_POOL=${CINDER_CEPH_POOL:-volumes}
|
||||
CINDER_CEPH_POOL_PG=${CINDER_CEPH_POOL_PG:-8}
|
||||
CINDER_CEPH_POOL_PGP=${CINDER_CEPH_POOL_PGP:-8}
|
||||
CINDER_CEPH_USER=${CINDER_CEPH_USER:-cinder}
|
||||
CINDER_CEPH_UUID=${CINDER_CEPH_UUID:-$(uuidgen)}
|
||||
|
||||
# Set ``CEPH_REPLICAS`` to configure how many replicas are to be
|
||||
# configured for your Ceph cluster. By default we are configuring
|
||||
# only one replica since this is way less CPU and memory intensive. If
|
||||
# you are planning to test Ceph replication feel free to increase this value
|
||||
CEPH_REPLICAS=${CEPH_REPLICAS:-1}
|
||||
CEPH_REPLICAS_SEQ=$(seq ${CEPH_REPLICAS})
|
||||
|
||||
# Functions
|
||||
# ------------
|
||||
|
||||
# import_libvirt_secret_ceph() - Imports Cinder user key into libvirt
|
||||
# so it can connect to the Ceph cluster while attaching a Cinder block device
|
||||
function import_libvirt_secret_ceph {
|
||||
cat > secret.xml <<EOF
|
||||
<secret ephemeral='no' private='no'>
|
||||
<uuid>${CINDER_CEPH_UUID}</uuid>
|
||||
<usage type='ceph'>
|
||||
<name>client.${CINDER_CEPH_USER} secret</name>
|
||||
</usage>
|
||||
</secret>
|
||||
EOF
|
||||
sudo virsh secret-define --file secret.xml
|
||||
sudo virsh secret-set-value --secret ${CINDER_CEPH_UUID} --base64 $(sudo ceph -c ${CEPH_CONF_FILE} auth get-key client.${CINDER_CEPH_USER})
|
||||
sudo rm -f secret.xml
|
||||
}
|
||||
|
||||
# cleanup_ceph() - Remove residual data files, anything left over from previous
|
||||
# runs that a clean run would need to clean up
|
||||
function cleanup_ceph {
|
||||
sudo pkill -f ceph-mon
|
||||
sudo pkill -f ceph-osd
|
||||
sudo rm -rf ${CEPH_DATA_DIR}/*/*
|
||||
sudo rm -rf ${CEPH_CONF_DIR}/*
|
||||
if egrep -q ${CEPH_DATA_DIR} /proc/mounts; then
|
||||
sudo umount ${CEPH_DATA_DIR}
|
||||
fi
|
||||
if [[ -e ${CEPH_DISK_IMAGE} ]]; then
|
||||
sudo rm -f ${CEPH_DISK_IMAGE}
|
||||
fi
|
||||
uninstall_package ceph ceph-common python-ceph libcephfs1 > /dev/null 2>&1
|
||||
VIRSH_UUID=$(sudo virsh secret-list | awk '/^ ?[0-9a-z]/ { print $1 }')
|
||||
sudo virsh secret-undefine ${VIRSH_UUID} >/dev/null 2>&1
|
||||
}
|
||||
|
||||
# configure_ceph() - Set config files, create data dirs, etc
|
||||
function configure_ceph {
|
||||
local count=0
|
||||
|
||||
# create a backing file disk
|
||||
create_disk ${CEPH_DISK_IMAGE} ${CEPH_DATA_DIR} ${CEPH_LOOPBACK_DISK_SIZE}
|
||||
|
||||
# populate ceph directory
|
||||
sudo mkdir -p ${CEPH_DATA_DIR}/{bootstrap-mds,bootstrap-osd,mds,mon,osd,tmp}
|
||||
|
||||
# create ceph monitor initial key and directory
|
||||
sudo ceph-authtool /var/lib/ceph/tmp/keyring.mon.$(hostname) --create-keyring --name=mon. --add-key=$(ceph-authtool --gen-print-key) --cap mon 'allow *'
|
||||
sudo mkdir /var/lib/ceph/mon/ceph-$(hostname)
|
||||
|
||||
# create a default ceph configuration file
|
||||
sudo tee -a ${CEPH_CONF_FILE} > /dev/null <<EOF
|
||||
[global]
|
||||
fsid = ${CEPH_FSID}
|
||||
mon_initial_members = $(hostname)
|
||||
mon_host = ${SERVICE_HOST}
|
||||
auth_cluster_required = cephx
|
||||
auth_service_required = cephx
|
||||
auth_client_required = cephx
|
||||
filestore_xattr_use_omap = true
|
||||
osd crush chooseleaf type = 0
|
||||
osd journal size = 100
|
||||
EOF
|
||||
|
||||
# bootstrap the ceph monitor
|
||||
sudo ceph-mon -c ${CEPH_CONF_FILE} --mkfs -i $(hostname) --keyring /var/lib/ceph/tmp/keyring.mon.$(hostname)
|
||||
if is_ubuntu; then
|
||||
sudo touch /var/lib/ceph/mon/ceph-$(hostname)/upstart
|
||||
sudo initctl emit ceph-mon id=$(hostname)
|
||||
else
|
||||
sudo touch /var/lib/ceph/mon/ceph-$(hostname)/sysvinit
|
||||
sudo service ceph start mon.$(hostname)
|
||||
fi
|
||||
|
||||
# wait for the admin key to come up otherwise we will not be able to do the actions below
|
||||
until [ -f ${CEPH_CONF_DIR}/ceph.client.admin.keyring ]; do
|
||||
echo_summary "Waiting for the Ceph admin key to be ready..."
|
||||
|
||||
count=$(($count + 1))
|
||||
if [ $count -eq 3 ]; then
|
||||
die $LINENO "Maximum of 3 retries reached"
|
||||
fi
|
||||
sleep 5
|
||||
done
|
||||
|
||||
# change pool replica size according to the CEPH_REPLICAS set by the user
|
||||
sudo ceph -c ${CEPH_CONF_FILE} osd pool set data size ${CEPH_REPLICAS}
|
||||
sudo ceph -c ${CEPH_CONF_FILE} osd pool set rbd size ${CEPH_REPLICAS}
|
||||
sudo ceph -c ${CEPH_CONF_FILE} osd pool set metadata size ${CEPH_REPLICAS}
|
||||
|
||||
# create a simple rule to take OSDs instead of host with CRUSH
|
||||
# then apply this rules to the default pool
|
||||
if [[ $CEPH_REPLICAS -ne 1 ]]; then
|
||||
sudo ceph -c ${CEPH_CONF_FILE} osd crush rule create-simple devstack default osd
|
||||
RULE_ID=$(sudo ceph -c ${CEPH_CONF_FILE} osd crush rule dump devstack | awk '/rule_id/ {print $3}' | cut -d ',' -f1)
|
||||
sudo ceph -c ${CEPH_CONF_FILE} osd pool set rbd crush_ruleset ${RULE_ID}
|
||||
sudo ceph -c ${CEPH_CONF_FILE} osd pool set data crush_ruleset ${RULE_ID}
|
||||
sudo ceph -c ${CEPH_CONF_FILE} osd pool set metadata crush_ruleset ${RULE_ID}
|
||||
fi
|
||||
|
||||
# create the OSD(s)
|
||||
for rep in ${CEPH_REPLICAS_SEQ}; do
|
||||
OSD_ID=$(sudo ceph -c ${CEPH_CONF_FILE} osd create)
|
||||
sudo mkdir -p ${CEPH_DATA_DIR}/osd/ceph-${OSD_ID}
|
||||
sudo ceph-osd -c ${CEPH_CONF_FILE} -i ${OSD_ID} --mkfs
|
||||
sudo ceph -c ${CEPH_CONF_FILE} auth get-or-create osd.${OSD_ID} mon 'allow profile osd ' osd 'allow *' | sudo tee ${CEPH_DATA_DIR}/osd/ceph-${OSD_ID}/keyring
|
||||
|
||||
# ceph's init script is parsing ${CEPH_DATA_DIR}/osd/ceph-${OSD_ID}/ and looking for a file
|
||||
# 'upstart' or 'sysinitv', thanks to these 'touches' we are able to control OSDs daemons
|
||||
# from the init script.
|
||||
if is_ubuntu; then
|
||||
sudo touch ${CEPH_DATA_DIR}/osd/ceph-${OSD_ID}/upstart
|
||||
else
|
||||
sudo touch ${CEPH_DATA_DIR}/osd/ceph-${OSD_ID}/sysvinit
|
||||
fi
|
||||
done
|
||||
}
|
||||
|
||||
# configure_ceph_glance() - Glance config needs to come after Glance is set up
|
||||
function configure_ceph_glance {
|
||||
# configure Glance service options, ceph pool, ceph user and ceph key
|
||||
sudo ceph -c ${CEPH_CONF_FILE} osd pool create ${GLANCE_CEPH_POOL} ${GLANCE_CEPH_POOL_PG} ${GLANCE_CEPH_POOL_PGP}
|
||||
sudo ceph -c ${CEPH_CONF_FILE} osd pool set ${GLANCE_CEPH_POOL} size ${CEPH_REPLICAS}
|
||||
if [[ $CEPH_REPLICAS -ne 1 ]]; then
|
||||
sudo ceph -c ${CEPH_CONF_FILE} osd pool set ${GLANCE_CEPH_POOL} crush_ruleset ${RULE_ID}
|
||||
fi
|
||||
sudo ceph -c ${CEPH_CONF_FILE} auth get-or-create client.${GLANCE_CEPH_USER} mon "allow r" osd "allow class-read object_prefix rbd_children, allow rwx pool=${GLANCE_CEPH_POOL}" | sudo tee ${CEPH_CONF_DIR}/ceph.client.${GLANCE_CEPH_USER}.keyring
|
||||
sudo chown ${STACK_USER}:$(id -g -n $whoami) ${CEPH_CONF_DIR}/ceph.client.${GLANCE_CEPH_USER}.keyring
|
||||
iniset $GLANCE_API_CONF DEFAULT default_store rbd
|
||||
iniset $GLANCE_API_CONF DEFAULT rbd_store_ceph_conf $CEPH_CONF_FILE
|
||||
iniset $GLANCE_API_CONF DEFAULT rbd_store_user $GLANCE_CEPH_USER
|
||||
iniset $GLANCE_API_CONF DEFAULT rbd_store_pool $GLANCE_CEPH_POOL
|
||||
iniset $GLANCE_API_CONF DEFAULT show_image_direct_url True
|
||||
}
|
||||
|
||||
# configure_ceph_nova() - Nova config needs to come after Nova is set up
|
||||
function configure_ceph_nova {
|
||||
# configure Nova service options, ceph pool, ceph user and ceph key
|
||||
sudo ceph -c ${CEPH_CONF_FILE} osd pool create ${NOVA_CEPH_POOL} ${NOVA_CEPH_POOL_PG} ${NOVA_CEPH_POOL_PGP}
|
||||
sudo ceph -c ${CEPH_CONF_FILE} osd pool set ${NOVA_CEPH_POOL} size ${CEPH_REPLICAS}
|
||||
if [[ $CEPH_REPLICAS -ne 1 ]]; then
|
||||
sudo -c ${CEPH_CONF_FILE} ceph osd pool set ${NOVA_CEPH_POOL} crush_ruleset ${RULE_ID}
|
||||
fi
|
||||
iniset $NOVA_CONF libvirt rbd_user ${CINDER_CEPH_USER}
|
||||
iniset $NOVA_CONF libvirt rbd_secret_uuid ${CINDER_CEPH_UUID}
|
||||
iniset $NOVA_CONF libvirt inject_key false
|
||||
iniset $NOVA_CONF libvirt inject_partition -2
|
||||
iniset $NOVA_CONF libvirt disk_cachemodes "network=writeback"
|
||||
iniset $NOVA_CONF libvirt images_type rbd
|
||||
iniset $NOVA_CONF libvirt images_rbd_pool ${NOVA_CEPH_POOL}
|
||||
iniset $NOVA_CONF libvirt images_rbd_ceph_conf ${CEPH_CONF_FILE}
|
||||
}
|
||||
|
||||
# configure_ceph_cinder() - Cinder config needs to come after Cinder is set up
|
||||
function configure_ceph_cinder {
|
||||
# Configure Cinder service options, ceph pool, ceph user and ceph key
|
||||
sudo ceph -c ${CEPH_CONF_FILE} osd pool create ${CINDER_CEPH_POOL} ${CINDER_CEPH_POOL_PG} ${CINDER_CEPH_POOL_PGP}
|
||||
sudo ceph -c ${CEPH_CONF_FILE} osd pool set ${CINDER_CEPH_POOL} size ${CEPH_REPLICAS}
|
||||
if [[ $CEPH_REPLICAS -ne 1 ]]; then
|
||||
sudo ceph -c ${CEPH_CONF_FILE} osd pool set ${CINDER_CEPH_POOL} crush_ruleset ${RULE_ID}
|
||||
|
||||
fi
|
||||
sudo ceph -c ${CEPH_CONF_FILE} auth get-or-create client.${CINDER_CEPH_USER} mon "allow r" osd "allow class-read object_prefix rbd_children, allow rwx pool=${CINDER_CEPH_POOL}, allow rwx pool=${NOVA_CEPH_POOL},allow rx pool=${GLANCE_CEPH_POOL}" | sudo tee ${CEPH_CONF_DIR}/ceph.client.${CINDER_CEPH_USER}.keyring
|
||||
sudo chown ${STACK_USER}:$(id -g -n $whoami) ${CEPH_CONF_DIR}/ceph.client.${CINDER_CEPH_USER}.keyring
|
||||
}
|
||||
|
||||
# init_ceph() - Initialize databases, etc.
|
||||
function init_ceph {
|
||||
# clean up from previous (possibly aborted) runs
|
||||
# make sure to kill all ceph processes first
|
||||
sudo pkill -f ceph-mon || true
|
||||
sudo pkill -f ceph-osd || true
|
||||
}
|
||||
|
||||
# install_ceph() - Collect source and prepare
|
||||
function install_ceph {
|
||||
# NOTE(dtroyer): At some point it'll be easier to test for unsupported distros,
|
||||
# leveraging the list in stack.sh
|
||||
if [[ ${os_CODENAME} =~ trusty ]] || [[ ${os_CODENAME} =~ Schrödinger’sCat ]] || [[ ${os_CODENAME} =~ Heisenbug ]]; then
|
||||
NO_UPDATE_REPOS=False
|
||||
install_package ceph
|
||||
else
|
||||
exit_distro_not_supported "Ceph since your distro doesn't provide (at least) the Firefly release. Please use Ubuntu Trusty or Fedora 19/20"
|
||||
fi
|
||||
}
|
||||
|
||||
# start_ceph() - Start running processes, including screen
|
||||
function start_ceph {
|
||||
if is_ubuntu; then
|
||||
sudo initctl emit ceph-mon id=$(hostname)
|
||||
for id in $(sudo ceph -c ${CEPH_CONF_FILE} osd ls); do
|
||||
sudo start ceph-osd id=${id}
|
||||
done
|
||||
else
|
||||
sudo service ceph start
|
||||
fi
|
||||
}
|
||||
|
||||
# stop_ceph() - Stop running processes (non-screen)
|
||||
function stop_ceph {
|
||||
if is_ubuntu; then
|
||||
sudo service ceph-mon-all stop > /dev/null 2>&1
|
||||
sudo service ceph-osd-all stop > /dev/null 2>&1
|
||||
else
|
||||
sudo service ceph stop > /dev/null 2>&1
|
||||
fi
|
||||
}
|
||||
|
||||
|
||||
# Restore xtrace
|
||||
$XTRACE
|
||||
|
||||
## Local variables:
|
||||
## mode: shell-script
|
||||
## End:
|
||||
79
lib/cinder_backends/ceph
Normal file
79
lib/cinder_backends/ceph
Normal file
@ -0,0 +1,79 @@
|
||||
# lib/cinder_backends/ceph
|
||||
# Configure the ceph backend
|
||||
|
||||
# Enable with:
|
||||
#
|
||||
# CINDER_ENABLED_BACKENDS+=,ceph:ceph
|
||||
#
|
||||
# Optional parameters:
|
||||
# CINDER_BAK_CEPH_POOL=<pool-name>
|
||||
# CINDER_BAK_CEPH_USER=<user>
|
||||
# CINDER_BAK_CEPH_POOL_PG=<pg-num>
|
||||
# CINDER_BAK_CEPH_POOL_PGP=<pgp-num>
|
||||
|
||||
# Dependencies:
|
||||
#
|
||||
# - ``functions`` file
|
||||
# - ``cinder`` configurations
|
||||
|
||||
# configure_ceph_backend_lvm - called from configure_cinder()
|
||||
|
||||
|
||||
# Save trace setting
|
||||
MY_XTRACE=$(set +o | grep xtrace)
|
||||
set +o xtrace
|
||||
|
||||
|
||||
# Defaults
|
||||
# --------
|
||||
|
||||
CINDER_BAK_CEPH_POOL=${CINDER_BAK_CEPH_POOL:-backups}
|
||||
CINDER_BAK_CEPH_POOL_PG=${CINDER_BAK_CEPH_POOL_PG:-8}
|
||||
CINDER_BAK_CEPH_POOL_PGP=${CINDER_BAK_CEPH_POOL_PGP:-8}
|
||||
CINDER_BAK_CEPH_USER=${CINDER_BAK_CEPH_USER:-cinder-bak}
|
||||
|
||||
|
||||
# Entry Points
|
||||
# ------------
|
||||
|
||||
# configure_cinder_backend_ceph - Set config files, create data dirs, etc
|
||||
# configure_cinder_backend_ceph $name
|
||||
function configure_cinder_backend_ceph {
|
||||
local be_name=$1
|
||||
|
||||
iniset $CINDER_CONF $be_name volume_backend_name $be_name
|
||||
iniset $CINDER_CONF $be_name volume_driver "cinder.volume.drivers.rbd.RBDDriver"
|
||||
iniset $CINDER_CONF $be_name rbd_ceph_conf "$CEPH_CONF"
|
||||
iniset $CINDER_CONF $be_name rbd_pool "$CINDER_CEPH_POOL"
|
||||
iniset $CINDER_CONF $be_name rbd_user "$CINDER_CEPH_USER"
|
||||
iniset $CINDER_CONF $be_name rbd_uuid "$CINDER_CEPH_UUID"
|
||||
iniset $CINDER_CONF $be_name rbd_flatten_volume_from_snapshot False
|
||||
iniset $CINDER_CONF $be_name rbd_max_clone_depth 5
|
||||
iniset $CINDER_CONF DEFAULT glance_api_version 2
|
||||
|
||||
if is_service_enabled c-bak; then
|
||||
# Configure Cinder backup service options, ceph pool, ceph user and ceph key
|
||||
sudo ceph -c ${CEPH_CONF_FILE} osd pool create ${CINDER_BAK_CEPH_POOL} ${CINDER_BAK_CEPH_POOL_PG} ${CINDER_BAK_CEPH_POOL_PGP}
|
||||
sudo ceph -c ${CEPH_CONF_FILE} osd pool set ${CINDER_BAK_CEPH_POOL} size ${CEPH_REPLICAS}
|
||||
if [[ $CEPH_REPLICAS -ne 1 ]]; then
|
||||
sudo ceph -c ${CEPH_CONF_FILE} osd pool set ${CINDER_BAK_CEPH_POOL} crush_ruleset ${RULE_ID}
|
||||
fi
|
||||
sudo ceph -c ${CEPH_CONF_FILE} auth get-or-create client.${CINDER_BAK_CEPH_USER} mon "allow r" osd "allow class-read object_prefix rbd_children, allow rwx pool=${CINDER_BAK_CEPH_POOL}" | sudo tee ${CEPH_CONF_DIR}/ceph.client.${CINDER_BAK_CEPH_USER}.keyring
|
||||
sudo chown $(whoami):$(whoami) ${CEPH_CONF_DIR}/ceph.client.${CINDER_BAK_CEPH_USER}.keyring
|
||||
|
||||
iniset $CINDER_CONF DEFAULT backup_driver "cinder.backup.drivers.ceph"
|
||||
iniset $CINDER_CONF DEFAULT backup_ceph_conf "$CEPH_CONF"
|
||||
iniset $CINDER_CONF DEFAULT backup_ceph_pool "$CINDER_BAK_CEPH_POOL"
|
||||
iniset $CINDER_CONF DEFAULT backup_ceph_user "$CINDER_BAK_CEPH_USER"
|
||||
iniset $CINDER_CONF DEFAULT backup_ceph_stripe_unit 0
|
||||
iniset $CINDER_CONF DEFAULT backup_ceph_stripe_count 0
|
||||
iniset $CINDER_CONF DEFAULT restore_discard_excess_bytes True
|
||||
fi
|
||||
}
|
||||
|
||||
# Restore xtrace
|
||||
$MY_XTRACE
|
||||
|
||||
# Local variables:
|
||||
# mode: shell-script
|
||||
# End:
|
||||
Loading…
Reference in New Issue
Block a user