Merge "refresh the devstack plugin docs, add plugin registry"

This commit is contained in:
Jenkins 2015-06-19 21:02:39 +00:00 committed by Gerrit Code Review
commit 4ff5e2bf73
3 changed files with 241 additions and 134 deletions

View File

@ -10,6 +10,7 @@ DevStack - an OpenStack Community Production
overview
configuration
plugins
plugin-registry
faq
changes
hacking

View File

@ -0,0 +1,73 @@
..
Note to reviewers: the intent of this file is to be easy for
community members to update. As such fast approving (single core +2)
is fine as long as you've identified that the plugin listed actually exists.
==========================
DevStack Plugin Registry
==========================
Since we've created the external plugin mechanism, it's gotten used by
a lot of projects. The following is a list of plugins that currently
exist. Any project that wishes to list their plugin here is welcomed
to.
Official OpenStack Projects
===========================
The following are plugins that exist for official OpenStack projects.
+--------------------+-------------------------------------------+--------------------+
|Plugin Name |URL |Comments |
+--------------------+-------------------------------------------+--------------------+
|magnum |git://git.openstack.org/openstack/magnum | |
+--------------------+-------------------------------------------+--------------------+
|trove |git://git.openstack.org/openstack/trove | |
+--------------------+-------------------------------------------+--------------------+
|zaqar |git://git.openstack.org/openstack/zarar | |
+--------------------+-------------------------------------------+--------------------+
Drivers
=======
+--------------------+-------------------------------------------------+------------------+
|Plugin Name |URL |Comments |
+--------------------+-------------------------------------------------+------------------+
|dragonflow |git://git.openstack.org/openstack/dragonflow |[d1]_ |
+--------------------+-------------------------------------------------+------------------+
|odl |git://git.openstack.org/openstack/networking-odl |[d2]_ |
+--------------------+-------------------------------------------------+------------------+
.. [d1] demonstrates example of installing 3rd party SDN controller
.. [d2] demonstrates a pretty advanced set of modes that that allow
one to run OpenDayLight either from a pre-existing install, or
also from source
Alternate Configs
=================
+-------------+------------------------------------------------------------+------------+
| Plugin Name | URL | Comments |
| | | |
+-------------+------------------------------------------------------------+------------+
|glusterfs |git://git.openstack.org/stackforge/devstack-plugin-glusterfs| |
+-------------+------------------------------------------------------------+------------+
| | | |
+-------------+------------------------------------------------------------+------------+
Additional Services
===================
+-------------+------------------------------------------+------------+
| Plugin Name | URL | Comments |
| | | |
+-------------+------------------------------------------+------------+
|ec2-api |git://git.openstack.org/stackforge/ec2api |[as1]_ |
+-------------+------------------------------------------+------------+
| | | |
+-------------+------------------------------------------+------------+
.. [as1] first functional devstack plugin, hence why used in most of
the examples.

View File

@ -2,103 +2,21 @@
Plugins
=======
DevStack has a couple of plugin mechanisms to allow easily adding
support for additional projects and features.
The OpenStack ecosystem is wide and deep, and only growing more so
every day. The value of DevStack is that it's simple enough to
understand what it's doing clearly. And yet we'd like to support as
much of the OpenStack Ecosystem as possible. We do that with plugins.
Extras.d Hooks
==============
DevStack plugins are bits of bash code that live outside the DevStack
tree. They are called through a strong contract, so these plugins can
be sure that they will continue to work in the future as DevStack
evolves.
These hooks are an extension of the service calls in
``stack.sh`` at specific points in its run, plus ``unstack.sh`` and
``clean.sh``. A number of the higher-layer projects are implemented in
DevStack using this mechanism.
Plugin Interface
================
The script in ``extras.d`` is expected to be mostly a dispatcher to
functions in a ``lib/*`` script. The scripts are named with a
zero-padded two digits sequence number prefix to control the order that
the scripts are called, and with a suffix of ``.sh``. DevStack reserves
for itself the sequence numbers 00 through 09 and 90 through 99.
Below is a template that shows handlers for the possible command-line
arguments:
::
# template.sh - DevStack extras.d dispatch script template
# check for service enabled
if is_service_enabled template; then
if [[ "$1" == "source" ]]; then
# Initial source of lib script
source $TOP_DIR/lib/template
fi
if [[ "$1" == "stack" && "$2" == "pre-install" ]]; then
# Set up system services
echo_summary "Configuring system services Template"
install_package cowsay
elif [[ "$1" == "stack" && "$2" == "install" ]]; then
# Perform installation of service source
echo_summary "Installing Template"
install_template
elif [[ "$1" == "stack" && "$2" == "post-config" ]]; then
# Configure after the other layer 1 and 2 services have been configured
echo_summary "Configuring Template"
configure_template
elif [[ "$1" == "stack" && "$2" == "extra" ]]; then
# Initialize and start the template service
echo_summary "Initializing Template"
##init_template
fi
if [[ "$1" == "unstack" ]]; then
# Shut down template services
# no-op
:
fi
if [[ "$1" == "clean" ]]; then
# Remove state and transient data
# Remember clean.sh first calls unstack.sh
# no-op
:
fi
fi
The arguments are:
- **source** - Called by each script that utilizes ``extras.d`` hooks;
this replaces directly sourcing the ``lib/*`` script.
- **stack** - Called by ``stack.sh`` three times for different phases
of its run:
- **pre-install** - Called after system (OS) setup is complete and
before project source is installed.
- **install** - Called after the layer 1 and 2 projects source and
their dependencies have been installed.
- **post-config** - Called after the layer 1 and 2 services have
been configured. All configuration files for enabled services
should exist at this point.
- **extra** - Called near the end after layer 1 and 2 services have
been started. This is the existing hook and has not otherwise
changed.
- **unstack** - Called by ``unstack.sh`` before other services are shut
down.
- **clean** - Called by ``clean.sh`` before other services are cleaned,
but after ``unstack.sh`` has been called.
Externally Hosted Plugins
=========================
Based on the extras.d hooks, DevStack supports a standard mechansim
for including plugins from external repositories. The plugin interface
assumes the following:
DevStack supports a standard mechansim for including plugins from
external repositories. The plugin interface assumes the following:
An external git repository that includes a ``devstack/`` top level
directory. Inside this directory there can be 2 files.
@ -118,11 +36,10 @@ directory. Inside this directory there can be 2 files.
default value only if the variable is unset or empty; e.g. in bash
syntax ``FOO=${FOO:-default}``.
- ``plugin.sh`` - the actual plugin. It will be executed by devstack
during it's run. The run order will be done in the registration
order for these plugins, and will occur immediately after all in
tree extras.d dispatch at the phase in question. The plugin.sh
looks like the extras.d dispatcher above.
- ``plugin.sh`` - the actual plugin. It is executed by devstack at
well defined points during a ``stack.sh`` run. The plugin.sh
internal structure is discussed bellow.
Plugins are registered by adding the following to the localrc section
of ``local.conf``.
@ -141,49 +58,121 @@ An example would be as follows::
enable_plugin ec2api git://git.openstack.org/stackforge/ec2api
Plugins for gate jobs
---------------------
plugin.sh contract
==================
All OpenStack plugins that wish to be used as gate jobs need to exist
in OpenStack's gerrit. Both ``openstack`` namespace and ``stackforge``
namespace are fine. This allows testing of the plugin as well as
provides network isolation against upstream git repository failures
(which we see often enough to be an issue).
``plugin.sh`` is a bash script that will be called at specific points
during ``stack.sh``, ``unstack.sh``, and ``clean.sh``. It will be
called in the following way::
Ideally plugins will be implemented as ``devstack`` directory inside
the project they are testing. For example, the stackforge/ec2-api
project has it's pluggin support in it's tree.
source $PATH/TO/plugin.sh <mode> [phase]
In the cases where there is no "project tree" per say (like
integrating a backend storage configuration such as ceph or glusterfs)
it's also allowed to build a dedicated
``stackforge/devstack-plugin-FOO`` project to house the plugin.
``mode`` can be thought of as the major mode being called, currently
one of: ``stack``, ``unstack``, ``clean``. ``phase`` is used by modes
which have multiple points during their run where it's necessary to
be able to execute code. All existing ``mode`` and ``phase`` points
are considered **strong contracts** and won't be removed without a
reasonable deprecation period. Additional new ``mode`` or ``phase``
points may be added at any time if we discover we need them to support
additional kinds of plugins in devstack.
Note jobs must not require cloning of repositories during tests.
Tests must list their repository in the ``PROJECTS`` variable for
`devstack-gate
<https://git.openstack.org/cgit/openstack-infra/devstack-gate/tree/devstack-vm-gate-wrap.sh>`_
for the repository to be available to the test. Further information
is provided in the project creator's guide.
The current full list of ``mode`` and ``phase`` are:
Hypervisor
==========
- **stack** - Called by ``stack.sh`` four times for different phases
of its run:
Hypervisor plugins are fairly new and condense most hypervisor
configuration into one place.
- **pre-install** - Called after system (OS) setup is complete and
before project source is installed.
- **install** - Called after the layer 1 and 2 projects source and
their dependencies have been installed.
- **post-config** - Called after the layer 1 and 2 services have
been configured. All configuration files for enabled services
should exist at this point.
- **extra** - Called near the end after layer 1 and 2 services have
been started.
The initial plugin implemented was for Docker support and is a useful
template for the required support. Plugins are placed in
``lib/nova_plugins`` and named ``hypervisor-<name>`` where ``<name>`` is
the value of ``VIRT_DRIVER``. Plugins must define the following
functions:
- **unstack** - Called by ``unstack.sh`` before other services are shut
down.
- **clean** - Called by ``clean.sh`` before other services are cleaned,
but after ``unstack.sh`` has been called.
- ``install_nova_hypervisor`` - install any external requirements
- ``configure_nova_hypervisor`` - make configuration changes, including
those to other services
- ``start_nova_hypervisor`` - start any external services
- ``stop_nova_hypervisor`` - stop any external services
- ``cleanup_nova_hypervisor`` - remove transient data and cache
Example plugin
====================
An example plugin would look something as follows.
``devstack/settings``::
# settings file for template
enable_service template
``devstack/plugin.sh``::
# plugin.sh - DevStack plugin.sh dispatch script template
function install_template {
...
}
function init_template {
...
}
function configure_template {
...
}
# check for service enabled
if is_service_enabled template; then
if [[ "$1" == "stack" && "$2" == "pre-install" ]]; then
# Set up system services
echo_summary "Configuring system services Template"
install_package cowsay
elif [[ "$1" == "stack" && "$2" == "install" ]]; then
# Perform installation of service source
echo_summary "Installing Template"
install_template
elif [[ "$1" == "stack" && "$2" == "post-config" ]]; then
# Configure after the other layer 1 and 2 services have been configured
echo_summary "Configuring Template"
configure_template
elif [[ "$1" == "stack" && "$2" == "extra" ]]; then
# Initialize and start the template service
echo_summary "Initializing Template"
init_template
fi
if [[ "$1" == "unstack" ]]; then
# Shut down template services
# no-op
:
fi
if [[ "$1" == "clean" ]]; then
# Remove state and transient data
# Remember clean.sh first calls unstack.sh
# no-op
:
fi
fi
Plugin Execution Order
======================
Plugins are run after in tree services at each of the stages
above. For example, if you need something to happen before Keystone
starts, you should do that at the ``post-config`` phase.
Multiple plugins can be specified in your ``local.conf``. When that
happens the plugins will be executed **in order** at each phase. This
allows plugins to conceptually depend on each other through
documenting to the user the order they must be declared. A formal
dependency mechanism is beyond the scope of the current work.
System Packages
===============
@ -205,3 +194,47 @@ repository:
- ``./devstack/files/rpms-suse/$plugin_name`` - Packages to install when
running on SUSE Linux or openSUSE.
Using Plugins in the OpenStack Gate
===================================
For everyday use, DevStack plugins can exist in any git tree that's
accessible on the internet. However, when using DevStack plugins in
the OpenStack gate, they must live in projects in OpenStack's
gerrit. Both ``openstack`` namespace and ``stackforge`` namespace are
fine. This allows testing of the plugin as well as provides network
isolation against upstream git repository failures (which we see often
enough to be an issue).
Ideally a plugin will be included within the ``devstack`` directory of
the project they are being tested. For example, the stackforge/ec2-api
project has its pluggin support in its own tree.
However, some times a DevStack plugin might be used solely to
configure a backend service that will be used by the rest of
OpenStack, so there is no "project tree" per say. Good examples
include: integration of back end storage (e.g. ceph or glusterfs),
integration of SDN controllers (e.g. ovn, OpenDayLight), or
integration of alternate RPC systems (e.g. zmq, qpid). In these cases
the best practice is to build a dedicated
``stackforge/devstack-plugin-FOO`` project.
To enable a plugin to be used in a gate job, the following lines will
be needed in your project.yaml definition::
# Because we are testing a non standard project, add the
# our project repository. This makes zuul do the right
# reference magic for testing changes.
export PROJECTS="stackforge/ec2-api $PROJECTS"
# note the actual url here is somewhat irrelevant because it
# caches in nodepool, however make it a valid url for
# documentation purposes.
export DEVSTACK_LOCAL_CONFIG="enable_plugin ec2-api git://git.openstack.org/stackforge/ec2-api"
See Also
========
For additional inspiration on devstack plugins you can check out the
`Plugin Registry <plugin-registry.html>`_.