#!/bin/bash # # lib/tempest # Install and configure Tempest # Dependencies: # # - ``functions`` file # - ``lib/nova`` service is running # - Global vars that are assumed to be defined: # - ``DEST``, ``FILES`` # - ``ADMIN_PASSWORD`` # - ``DEFAULT_IMAGE_NAME`` # - ``S3_SERVICE_PORT`` # - ``SERVICE_HOST`` # - ``BASE_SQL_CONN`` ``lib/database`` declares # - ``PUBLIC_NETWORK_NAME`` # - ``Q_ROUTER_NAME`` # - ``Q_L3_ENABLED`` # - ``VIRT_DRIVER`` # - ``LIBVIRT_TYPE`` # - ``KEYSTONE_SERVICE_PROTOCOL``, ``KEYSTONE_SERVICE_HOST`` from lib/keystone # # Optional Dependencies: # # - ``ALT_*`` # - ``LIVE_MIGRATION_AVAILABLE`` # - ``USE_BLOCK_MIGRATION_FOR_LIVE_MIGRATION`` # - ``DEFAULT_INSTANCE_TYPE`` # - ``DEFAULT_INSTANCE_USER`` # - ``CINDER_ENABLED_BACKENDS`` # - ``NOVA_ALLOW_DUPLICATE_NETWORKS`` # # ``stack.sh`` calls the entry points in this order: # # - install_tempest # - configure_tempest # Save trace setting _XTRACE_TEMPEST=$(set +o | grep xtrace) set +o xtrace # Defaults # -------- # Set up default directories GITDIR["tempest-lib"]=$DEST/tempest-lib TEMPEST_DIR=$DEST/tempest TEMPEST_CONFIG_DIR=${TEMPEST_CONFIG_DIR:-$TEMPEST_DIR/etc} TEMPEST_CONFIG=$TEMPEST_CONFIG_DIR/tempest.conf TEMPEST_STATE_PATH=${TEMPEST_STATE_PATH:=$DATA_DIR/tempest} NOVA_SOURCE_DIR=$DEST/nova BUILD_INTERVAL=1 # This is the timeout that tempest will wait for a VM to change state, # spawn, delete, etc. # The default is set to 196 seconds. BUILD_TIMEOUT=${BUILD_TIMEOUT:-196} # This must be False on stable branches, as master tempest # deps do not match stable branch deps. Set this to True to # have tempest installed in DevStack by default. INSTALL_TEMPEST=${INSTALL_TEMPEST:-"True"} # Cinder/Volume variables TEMPEST_VOLUME_DRIVER=${TEMPEST_VOLUME_DRIVER:-default} TEMPEST_DEFAULT_VOLUME_VENDOR="Open Source" TEMPEST_VOLUME_VENDOR=${TEMPEST_VOLUME_VENDOR:-$TEMPEST_DEFAULT_VOLUME_VENDOR} TEMPEST_DEFAULT_STORAGE_PROTOCOL="iSCSI" TEMPEST_STORAGE_PROTOCOL=${TEMPEST_STORAGE_PROTOCOL:-$TEMPEST_DEFAULT_STORAGE_PROTOCOL} # Neutron/Network variables IPV6_ENABLED=$(trueorfalse True IPV6_ENABLED) IPV6_SUBNET_ATTRIBUTES_ENABLED=$(trueorfalse True IPV6_SUBNET_ATTRIBUTES_ENABLED) # Do we want to make a configuration where Tempest has admin on # the cloud. We don't always want to so that we can ensure Tempest # would work on a public cloud. TEMPEST_HAS_ADMIN=$(trueorfalse True TEMPEST_HAS_ADMIN) # Credential provider configuration option variables TEMPEST_ALLOW_TENANT_ISOLATION=${TEMPEST_ALLOW_TENANT_ISOLATION:-$TEMPEST_HAS_ADMIN} TEMPEST_USE_TEST_ACCOUNTS=$(trueorfalse False TEMPEST_USE_TEST_ACCOUNTS) # The number of workers tempest is expected to be run with. This is used for # generating a accounts.yaml for running with test-accounts. This is also the # same variable that devstack-gate uses to specify the number of workers that # it will run tempest with TEMPEST_CONCURRENCY=${TEMPEST_CONCURRENCY:-$(nproc)} # Functions # --------- # remove_disabled_extension - removes disabled extensions from the list of extensions # to test for a given service function remove_disabled_extensions { local extensions_list=$1 shift local disabled_exts=$* remove_disabled_services "$extensions_list" "$disabled_exts" } # configure_tempest() - Set config files, create data dirs, etc function configure_tempest { if [[ "$INSTALL_TEMPEST" == "True" ]]; then setup_develop $TEMPEST_DIR else # install testr since its used to process tempest logs pip_install_gr testrepository fi local image_lines local images local num_images local image_uuid local image_uuid_alt local password local line local flavors local available_flavors local flavors_ref local flavor_lines local public_network_id local public_router_id local ssh_connect_method="floating" # Save IFS ifs=$IFS # Glance should already contain images to be used in tempest # testing. Here we simply look for images stored in Glance # and set the appropriate variables for use in the tempest config # We ignore ramdisk and kernel images, look for the default image # ``DEFAULT_IMAGE_NAME``. If not found, we set the ``image_uuid`` to the # first image returned and set ``image_uuid_alt`` to the second, # if there is more than one returned... # ... Also ensure we only take active images, so we don't get snapshots in process declare -a images if is_service_enabled glance; then while read -r IMAGE_NAME IMAGE_UUID; do if [ "$IMAGE_NAME" = "$DEFAULT_IMAGE_NAME" ]; then image_uuid="$IMAGE_UUID" image_uuid_alt="$IMAGE_UUID" fi images+=($IMAGE_UUID) done < <(openstack image list --property status=active | awk -F'|' '!/^(+--)|ID|aki|ari/ { print $3,$2 }') case "${#images[*]}" in 0) echo "Found no valid images to use!" exit 1 ;; 1) if [ -z "$image_uuid" ]; then image_uuid=${images[0]} image_uuid_alt=${images[0]} fi ;; *) if [ -z "$image_uuid" ]; then image_uuid=${images[0]} image_uuid_alt=${images[1]} fi ;; esac fi # (Re)create ``tempest.conf`` # Create every time because the image UUIDS are going to change sudo install -d -o $STACK_USER $TEMPEST_CONFIG_DIR rm -f $TEMPEST_CONFIG local password=${ADMIN_PASSWORD:-secret} # See ``lib/keystone`` where these users and tenants are set up local admin_username=${ADMIN_USERNAME:-admin} local admin_project_name=${ADMIN_TENANT_NAME:-admin} local admin_domain_name=${ADMIN_DOMAIN_NAME:-Default} local tempest_username=${TEMPEST_USERNAME:-demo} local tempest_project_name=${TEMPEST_TENANT_NAME:-demo} local alt_username=${ALT_USERNAME:-alt_demo} local alt_project_name=${ALT_TENANT_NAME:-alt_demo} local admin_project_id admin_project_id=$(openstack project list | awk "/ admin / { print \$2 }") if is_service_enabled nova; then # If ``DEFAULT_INSTANCE_TYPE`` is not declared, use the new behavior # Tempest creates its own instance types available_flavors=$(nova flavor-list) if [[ -z "$DEFAULT_INSTANCE_TYPE" ]]; then if [[ ! ( $available_flavors =~ 'm1.nano' ) ]]; then nova flavor-create m1.nano 42 64 0 1 fi flavor_ref=42 if [[ ! ( $available_flavors =~ 'm1.micro' ) ]]; then nova flavor-create m1.micro 84 128 0 1 fi flavor_ref_alt=84 else # Check Nova for existing flavors, if ``DEFAULT_INSTANCE_TYPE`` is set use it. IFS=$'\r\n' flavors="" for line in $available_flavors; do f=$(echo $line | awk "/ $DEFAULT_INSTANCE_TYPE / { print \$2 }") flavors="$flavors $f" done for line in $available_flavors; do flavors="$flavors `echo $line | grep -v "^\(|\s*ID\|+--\)" | cut -d' ' -f2`" done IFS=" " flavors=($flavors) num_flavors=${#flavors[*]} echo "Found $num_flavors flavors" if [[ $num_flavors -eq 0 ]]; then echo "Found no valid flavors to use!" exit 1 fi flavor_ref=${flavors[0]} flavor_ref_alt=$flavor_ref # Ensure ``flavor_ref`` and ``flavor_ref_alt`` have different values. # Some resize instance in tempest tests depends on this. for f in ${flavors[@]:1}; do if [[ $f -ne $flavor_ref ]]; then flavor_ref_alt=$f break fi done fi fi ssh_connect_method=${TEMPEST_SSH_CONNECT_METHOD:-$ssh_connect_method} if [ "$Q_L3_ENABLED" = "True" ]; then public_network_id=$(neutron net-list | grep $PUBLIC_NETWORK_NAME | \ awk '{print $2}') fi iniset $TEMPEST_CONFIG DEFAULT use_syslog $SYSLOG # Oslo iniset $TEMPEST_CONFIG oslo_concurrency lock_path $TEMPEST_STATE_PATH mkdir -p $TEMPEST_STATE_PATH iniset $TEMPEST_CONFIG DEFAULT use_stderr False iniset $TEMPEST_CONFIG DEFAULT log_file tempest.log iniset $TEMPEST_CONFIG DEFAULT debug True # Timeouts iniset $TEMPEST_CONFIG compute build_timeout $BUILD_TIMEOUT iniset $TEMPEST_CONFIG volume build_timeout $BUILD_TIMEOUT # Identity iniset $TEMPEST_CONFIG identity uri "$KEYSTONE_SERVICE_PROTOCOL://$KEYSTONE_SERVICE_HOST:5000/v2.0/" iniset $TEMPEST_CONFIG identity uri_v3 "$KEYSTONE_SERVICE_URI_V3" if [[ "$TEMPEST_HAS_ADMIN" == "True" ]]; then iniset $TEMPEST_CONFIG auth admin_username $admin_username iniset $TEMPEST_CONFIG auth admin_password "$password" iniset $TEMPEST_CONFIG auth admin_tenant_name $admin_project_name iniset $TEMPEST_CONFIG auth admin_tenant_id $admin_project_id iniset $TEMPEST_CONFIG auth admin_domain_name $admin_domain_name fi if [ "$ENABLE_IDENTITY_V2" == "False" ]; then # Only Identity v3 is available; then skip Identity API v2 tests iniset $TEMPEST_CONFIG identity-feature-enabled api_v2 False # In addition, use v3 auth tokens for running all Tempest tests iniset $TEMPEST_CONFIG identity auth_version v3 else iniset $TEMPEST_CONFIG identity auth_version ${TEMPEST_AUTH_VERSION:-v2} fi if is_ssl_enabled_service "key" || is_service_enabled tls-proxy; then iniset $TEMPEST_CONFIG identity ca_certificates_file $SSL_BUNDLE_FILE fi # Image # We want to be able to override this variable in the gate to avoid # doing an external HTTP fetch for this test. if [[ ! -z "$TEMPEST_HTTP_IMAGE" ]]; then iniset $TEMPEST_CONFIG image http_image $TEMPEST_HTTP_IMAGE fi if [ "$VIRT_DRIVER" = "xenserver" ]; then iniset $TEMPEST_CONFIG image disk_formats "ami,ari,aki,vhd,raw,iso" fi # Image Features iniset $TEMPEST_CONFIG image-feature-enabled deactivate_image True # Compute iniset $TEMPEST_CONFIG compute ssh_user ${DEFAULT_INSTANCE_USER:-cirros} # DEPRECATED iniset $TEMPEST_CONFIG compute image_ref $image_uuid iniset $TEMPEST_CONFIG compute image_ref_alt $image_uuid_alt iniset $TEMPEST_CONFIG compute image_alt_ssh_user ${ALT_INSTANCE_USER:-cirros} iniset $TEMPEST_CONFIG compute flavor_ref $flavor_ref iniset $TEMPEST_CONFIG compute flavor_ref_alt $flavor_ref_alt iniset $TEMPEST_CONFIG compute ssh_connect_method $ssh_connect_method # set the equiv validation option here as well to ensure they are # in sync. They shouldn't be separate options. iniset $TEMPEST_CONFIG validation connect_method $ssh_connect_method if [[ ! $(is_service_enabled n-cell) && ! $(is_service_enabled neutron) ]]; then iniset $TEMPEST_CONFIG compute fixed_network_name $PRIVATE_NETWORK_NAME fi # Set the service catalog entry for Tempest to run on. Typically # used to try different compute API version targets. The tempest # default if 'compute', which is typically valid, so only set this # if you want to change it. if [[ -n "$TEMPEST_COMPUTE_TYPE" ]]; then iniset $TEMPEST_CONFIG compute catalog_type $TEMPEST_COMPUTE_TYPE fi # Compute Features # Run ``verify_tempest_config -ur`` to retrieve enabled extensions on API endpoints # NOTE(mtreinish): This must be done after auth settings are added to the tempest config local tmp_cfg_file tmp_cfg_file=$(mktemp) cd $TEMPEST_DIR if [[ "$OFFLINE" != "True" ]]; then tox -revenv --notest fi # Auth iniset $TEMPEST_CONFIG auth tempest_roles "Member" if [[ $TEMPEST_USE_TEST_ACCOUNTS == "True" ]]; then if [[ $TEMPEST_HAS_ADMIN == "True" ]]; then tempest-account-generator -c $TEMPEST_CONFIG --os-username $admin_username --os-password "$password" --os-tenant-name $admin_project_name -r $TEMPEST_CONCURRENCY --with-admin etc/accounts.yaml else tempest-account-generator -c $TEMPEST_CONFIG --os-username $admin_username --os-password "$password" --os-tenant-name $admin_project_name -r $TEMPEST_CONCURRENCY etc/accounts.yaml fi iniset $TEMPEST_CONFIG auth use_dynamic_credentials False iniset $TEMPEST_CONFIG auth test_accounts_file "etc/accounts.yaml" elif [[ $TEMPEST_HAS_ADMIN == "False" ]]; then iniset $TEMPEST_CONFIG auth use_dynamic_credentials ${TEMPEST_ALLOW_TENANT_ISOLATION:-False} else iniset $TEMPEST_CONFIG auth use_dynamic_credentials ${TEMPEST_ALLOW_TENANT_ISOLATION:-True} fi # NOTE(mtreinish): Respect constraints on tempest verify-config venv tox -evenv -- pip install -c $REQUIREMENTS_DIR/upper-constraints.txt -r requirements.txt tox -evenv -- tempest verify-config -uro $tmp_cfg_file local compute_api_extensions=${COMPUTE_API_EXTENSIONS:-"all"} if [[ ! -z "$DISABLE_COMPUTE_API_EXTENSIONS" ]]; then # Enabled extensions are either the ones explicitly specified or those available on the API endpoint compute_api_extensions=${COMPUTE_API_EXTENSIONS:-$(iniget $tmp_cfg_file compute-feature-enabled api_extensions | tr -d " ")} # Remove disabled extensions compute_api_extensions=$(remove_disabled_extensions $compute_api_extensions $DISABLE_COMPUTE_API_EXTENSIONS) fi # Set the microversion range for compute tests. # This is used to run the Nova microversions tests. # Setting [None, latest] range of microversion which allow Tempest to run all microversions tests. # NOTE- To avoid microversion tests failure on stable branch, we need to change "tempest_compute_max_microversion" # for stable branch on each release which should be changed from "latest" to max supported version of that release. local tempest_compute_min_microversion=${TEMPEST_COMPUTE_MIN_MICROVERSION:-None} local tempest_compute_max_microversion=${TEMPEST_COMPUTE_MAX_MICROVERSION:-"latest"} # Reset microversions to None where v2.0 is running which does not support microversion. # Both "None" means no microversion testing. if [[ "$TEMPEST_COMPUTE_TYPE" == "compute_legacy" ]]; then tempest_compute_min_microversion=None tempest_compute_max_microversion=None fi if [ "$tempest_compute_min_microversion" == "None" ]; then inicomment $TEMPEST_CONFIG compute-feature-enabled min_microversion else iniset $TEMPEST_CONFIG compute-feature-enabled min_microversion $tempest_compute_min_microversion fi if [ "$tempest_compute_max_microversion" == "None" ]; then inicomment $TEMPEST_CONFIG compute-feature-enabled max_microversion else iniset $TEMPEST_CONFIG compute-feature-enabled max_microversion $tempest_compute_max_microversion fi iniset $TEMPEST_CONFIG compute-feature-enabled resize True iniset $TEMPEST_CONFIG compute-feature-enabled live_migration ${LIVE_MIGRATION_AVAILABLE:-False} iniset $TEMPEST_CONFIG compute-feature-enabled change_password False iniset $TEMPEST_CONFIG compute-feature-enabled block_migration_for_live_migration ${USE_BLOCK_MIGRATION_FOR_LIVE_MIGRATION:-False} iniset $TEMPEST_CONFIG compute-feature-enabled api_extensions $compute_api_extensions # TODO(mriedem): Remove the preserve_ports flag when Juno is end of life. iniset $TEMPEST_CONFIG compute-feature-enabled preserve_ports True # TODO(gilliard): Remove the live_migrate_paused_instances flag when Juno is end of life. iniset $TEMPEST_CONFIG compute-feature-enabled live_migrate_paused_instances True iniset $TEMPEST_CONFIG compute-feature-enabled attach_encrypted_volume ${ATTACH_ENCRYPTED_VOLUME_AVAILABLE:-True} # TODO(mriedem): Remove this when kilo-eol happens since the # neutron.allow_duplicate_networks option was removed from nova in Liberty # and is now the default behavior. iniset $TEMPEST_CONFIG compute-feature-enabled allow_duplicate_networks ${NOVA_ALLOW_DUPLICATE_NETWORKS:-True} if is_service_enabled n-cell; then # Cells doesn't support shelving/unshelving iniset $TEMPEST_CONFIG compute-feature-enabled shelve False # Cells doesn't support hot-plugging virtual interfaces. iniset $TEMPEST_CONFIG compute-feature-enabled interface_attach False # Cells v1 doesn't support the rescue/unrescue tests in Tempest iniset $TEMPEST_CONFIG compute-feature-enabled rescue False if [[ -z "$DEFAULT_INSTANCE_TYPE" ]]; then # Cells supports resize but does not currently work with devstack # because of the custom flavors created for Tempest runs which are # not in the cells database. # TODO(mriedem): work on adding a nova-manage command to sync # flavors into the cells database. iniset $TEMPEST_CONFIG compute-feature-enabled resize False fi fi # Network iniset $TEMPEST_CONFIG network api_version 2.0 iniset $TEMPEST_CONFIG network tenant_networks_reachable false iniset $TEMPEST_CONFIG network public_network_id "$public_network_id" iniset $TEMPEST_CONFIG network public_router_id "$public_router_id" iniset $TEMPEST_CONFIG network default_network "$FIXED_RANGE" iniset $TEMPEST_CONFIG network-feature-enabled ipv6 "$IPV6_ENABLED" iniset $TEMPEST_CONFIG network-feature-enabled ipv6_subnet_attributes "$IPV6_SUBNET_ATTRIBUTES_ENABLED" local network_api_extensions=${NETWORK_API_EXTENSIONS:-"all"} if [[ ! -z "$DISABLE_NETWORK_API_EXTENSIONS" ]]; then # Enabled extensions are either the ones explicitly specified or those available on the API endpoint network_api_extensions=${NETWORK_API_EXTENSIONS:-$(iniget $tmp_cfg_file network-feature-enabled api_extensions | tr -d " ")} # Remove disabled extensions network_api_extensions=$(remove_disabled_extensions $network_api_extensions $DISABLE_NETWORK_API_EXTENSIONS) fi iniset $TEMPEST_CONFIG network-feature-enabled api_extensions $network_api_extensions # Orchestration Tests if is_service_enabled heat; then if [[ ! -z "$HEAT_CFN_IMAGE_URL" ]]; then iniset $TEMPEST_CONFIG orchestration image_ref $(basename "${HEAT_CFN_IMAGE_URL%.*}") fi # Nova might not be enabled, especially when we want to test tempest scenario/API that only create Neutron resources if is_service_enabled nova; then # build a specialized heat flavor available_flavors=$(nova flavor-list) if [[ ! ( $available_flavors =~ 'm1.heat' ) ]]; then nova flavor-create m1.heat 451 512 0 1 fi iniset $TEMPEST_CONFIG orchestration instance_type "m1.heat" fi iniset $TEMPEST_CONFIG orchestration build_timeout 900 iniset $TEMPEST_CONFIG orchestration stack_owner_role "_member_" fi # Scenario SCENARIO_IMAGE_DIR=${SCENARIO_IMAGE_DIR:-$FILES/images/cirros-${CIRROS_VERSION}-${CIRROS_ARCH}-uec} iniset $TEMPEST_CONFIG scenario img_dir $SCENARIO_IMAGE_DIR iniset $TEMPEST_CONFIG scenario ami_img_file "cirros-${CIRROS_VERSION}-${CIRROS_ARCH}-blank.img" iniset $TEMPEST_CONFIG scenario ari_img_file "cirros-${CIRROS_VERSION}-${CIRROS_ARCH}-initrd" iniset $TEMPEST_CONFIG scenario aki_img_file "cirros-${CIRROS_VERSION}-${CIRROS_ARCH}-vmlinuz" iniset $TEMPEST_CONFIG scenario img_file "cirros-${CIRROS_VERSION}-${CIRROS_ARCH}-disk.img" # Large Ops Number iniset $TEMPEST_CONFIG scenario large_ops_number ${TEMPEST_LARGE_OPS_NUMBER:-0} # Telemetry iniset $TEMPEST_CONFIG telemetry-feature-enabled events "True" # Object Store local object_storage_api_extensions=${OBJECT_STORAGE_API_EXTENSIONS:-"all"} if [[ ! -z "$DISABLE_OBJECT_STORAGE_API_EXTENSIONS" ]]; then # Enabled extensions are either the ones explicitly specified or those available on the API endpoint object_storage_api_extensions=${OBJECT_STORAGE_API_EXTENSIONS:-$(iniget $tmp_cfg_file object-storage-feature-enabled discoverable_apis | tr -d " ")} # Remove disabled extensions object_storage_api_extensions=$(remove_disabled_extensions $object_storage_api_extensions $DISABLE_STORAGE_API_EXTENSIONS) fi iniset $TEMPEST_CONFIG object-storage-feature-enabled discoverable_apis $object_storage_api_extensions # Validation iniset $TEMPEST_CONFIG validation run_validation ${TEMPEST_RUN_VALIDATION:-False} iniset $TEMPEST_CONFIG validation ip_version_for_ssh 4 iniset $TEMPEST_CONFIG validation ssh_timeout $BUILD_TIMEOUT iniset $TEMPEST_CONFIG validation image_ssh_user ${DEFAULT_INSTANCE_USER:-cirros} iniset $TEMPEST_CONFIG validation network_for_ssh $PRIVATE_NETWORK_NAME # Volume # TODO(obutenko): Remove the incremental_backup_force flag when Kilo and Juno is end of life. iniset $TEMPEST_CONFIG volume-feature-enabled incremental_backup_force True # TODO(ynesenenko): Remove the volume_services flag when Liberty and Kilo will correct work with host info. iniset $TEMPEST_CONFIG volume-feature-enabled volume_services True local volume_api_extensions=${VOLUME_API_EXTENSIONS:-"all"} if [[ ! -z "$DISABLE_VOLUME_API_EXTENSIONS" ]]; then # Enabled extensions are either the ones explicitly specified or those available on the API endpoint volume_api_extensions=${VOLUME_API_EXTENSIONS:-$(iniget $tmp_cfg_file volume-feature-enabled api_extensions | tr -d " ")} # Remove disabled extensions volume_api_extensions=$(remove_disabled_extensions $volume_api_extensions $DISABLE_VOLUME_API_EXTENSIONS) fi iniset $TEMPEST_CONFIG volume-feature-enabled api_extensions $volume_api_extensions if ! is_service_enabled c-bak; then iniset $TEMPEST_CONFIG volume-feature-enabled backup False fi # Using ``CINDER_ENABLED_BACKENDS`` if [[ -n "$CINDER_ENABLED_BACKENDS" ]] && [[ $CINDER_ENABLED_BACKENDS =~ .*,.* ]]; then iniset $TEMPEST_CONFIG volume-feature-enabled multi_backend "True" local i=1 local be for be in ${CINDER_ENABLED_BACKENDS//,/ }; do local be_name=${be##*:} iniset $TEMPEST_CONFIG volume "backend${i}_name" "$be_name" i=$(( i + 1 )) done fi if [ $TEMPEST_VOLUME_DRIVER != "default" -o \ "$TEMPEST_VOLUME_VENDOR" != "$TEMPEST_DEFAULT_VOLUME_VENDOR" ]; then iniset $TEMPEST_CONFIG volume vendor_name "$TEMPEST_VOLUME_VENDOR" fi if [ $TEMPEST_VOLUME_DRIVER != "default" -o \ "$TEMPEST_STORAGE_PROTOCOL" != "$TEMPEST_DEFAULT_STORAGE_PROTOCOL" ]; then iniset $TEMPEST_CONFIG volume storage_protocol "$TEMPEST_STORAGE_PROTOCOL" fi # Dashboard iniset $TEMPEST_CONFIG dashboard dashboard_url "http://$SERVICE_HOST/" # CLI iniset $TEMPEST_CONFIG cli cli_dir $NOVA_BIN_DIR # Baremetal if [ "$VIRT_DRIVER" = "ironic" ] ; then iniset $TEMPEST_CONFIG baremetal driver_enabled True iniset $TEMPEST_CONFIG baremetal unprovision_timeout $BUILD_TIMEOUT iniset $TEMPEST_CONFIG baremetal active_timeout $BUILD_TIMEOUT iniset $TEMPEST_CONFIG baremetal deploy_img_dir $FILES iniset $TEMPEST_CONFIG baremetal node_uuid $IRONIC_NODE_UUID iniset $TEMPEST_CONFIG compute-feature-enabled change_password False iniset $TEMPEST_CONFIG compute-feature-enabled console_output False iniset $TEMPEST_CONFIG compute-feature-enabled interface_attach False iniset $TEMPEST_CONFIG compute-feature-enabled live_migration False iniset $TEMPEST_CONFIG compute-feature-enabled pause False iniset $TEMPEST_CONFIG compute-feature-enabled rescue False iniset $TEMPEST_CONFIG compute-feature-enabled resize False iniset $TEMPEST_CONFIG compute-feature-enabled shelve False iniset $TEMPEST_CONFIG compute-feature-enabled snapshot False iniset $TEMPEST_CONFIG compute-feature-enabled suspend False fi # Libvirt-LXC if [ "$VIRT_DRIVER" = "libvirt" ] && [ "$LIBVIRT_TYPE" = "lxc" ]; then iniset $TEMPEST_CONFIG compute-feature-enabled rescue False iniset $TEMPEST_CONFIG compute-feature-enabled resize False iniset $TEMPEST_CONFIG compute-feature-enabled shelve False iniset $TEMPEST_CONFIG compute-feature-enabled snapshot False iniset $TEMPEST_CONFIG compute-feature-enabled suspend False fi # ``service_available`` # # this tempest service list needs to be all the services that # tempest supports, otherwise we can have an erroneous set of # defaults (something defaulting true in Tempest, but not listed here). local service local tempest_services="key,glance,nova,neutron,cinder,swift,heat,ceilometer,horizon,sahara,ironic,trove" for service in ${tempest_services//,/ }; do if is_service_enabled $service ; then iniset $TEMPEST_CONFIG service_available $service "True" else iniset $TEMPEST_CONFIG service_available $service "False" fi done if [ "$VIRT_DRIVER" = "libvirt" ] && [ "$LIBVIRT_TYPE" = "lxc" ]; then # libvirt-lxc does not support boot from volume or attaching volumes # so basically anything with cinder is out of the question. iniset $TEMPEST_CONFIG service_available cinder "False" fi # Restore IFS IFS=$ifs } # install_tempest_lib() - Collect source, prepare, and install ``tempest-lib`` function install_tempest_lib { if use_library_from_git "tempest-lib"; then git_clone_by_name "tempest-lib" setup_dev_lib "tempest-lib" # NOTE(mtreinish) For testing ``tempest-lib`` from git with Tempest we need to # put the git version of ``tempest-lib`` in the Tempest job's tox venv export PIP_VIRTUAL_ENV=${PROJECT_VENV["tempest"]} setup_dev_lib "tempest-lib" unset PIP_VIRTUAL_ENV fi } # install_tempest() - Collect source and prepare function install_tempest { git_clone $TEMPEST_REPO $TEMPEST_DIR $TEMPEST_BRANCH pip_install tox pushd $TEMPEST_DIR tox --notest -efull # NOTE(mtreinish) Respect constraints in the tempest full venv, things that # are using a tox job other than full will not be respecting constraints but # running pip install -U on tempest requirements $TEMPEST_DIR/.tox/full/bin/pip install -c $REQUIREMENTS_DIR/upper-constraints.txt -r requirements.txt PROJECT_VENV["tempest"]=${TEMPEST_DIR}/.tox/full install_tempest_lib popd } # Restore xtrace $_XTRACE_TEMPEST # Tell emacs to use shell-script-mode ## Local variables: ## mode: shell-script ## End: