============= Configuration ============= DevStack has always tried to be mostly-functional with a minimal amount of configuration. The number of options has ballooned as projects add features, new projects added and more combinations need to be tested. Historically DevStack obtained all local configuration and customizations from a ``localrc`` file. The number of configuration variables that are simply passed-through to the individual project configuration files is also increasing. The old mechanism for this (``EXTRAS_OPTS`` and friends) required specific code for each file and did not scale well. In Oct 2013 a new configuration method was introduced (in `review 46768 `__) to hopefully simplify this process and meet the following goals: - contain all non-default local configuration in a single file - be backward-compatible with ``localrc`` to smooth the transition process - allow settings in arbitrary configuration files to be changed local.conf ========== The new configuration file is ``local.conf`` and resides in the root DevStack directory like the old ``localrc`` file. It is a modified INI format file that introduces a meta-section header to carry additional information regarding the configuration files to be changed. The new header is similar to a normal INI section header but with double brackets (``[[ ... ]]``) and two internal fields separated by a pipe (``|``): :: [[ | ]] where ```` is one of a set of phase names defined by ``stack.sh`` and ```` is the configuration filename. The filename is eval'ed in the ``stack.sh`` context so all environment variables are available and may be used. Using the project config file variables in the header is strongly suggested (see the ``NOVA_CONF`` example below). If the path of the config file does not exist it is skipped. The defined phases are: - **local** - extracts ``localrc`` from ``local.conf`` before ``stackrc`` is sourced - **pre-install** - runs after the system packages are installed but before any of the source repositories are installed - **install** - runs immediately after the repo installations are complete - **post-config** - runs after the layer 2 services are configured and before they are started - **extra** - runs after services are started and before any files in ``extra.d`` are executed The file is processed strictly in sequence; meta-sections may be specified more than once but if any settings are duplicated the last to appear in the file will be used. :: [[post-config|$NOVA_CONF]] [DEFAULT] use_syslog = True [osapi_v3] enabled = False A specific meta-section ``local|localrc`` is used to provide a default ``localrc`` file (actually ``.localrc.auto``). This allows all custom settings for DevStack to be contained in a single file. If ``localrc`` exists it will be used instead to preserve backward-compatibility. More details on the :doc:`contents of local.conf ` are available. :: [[local|localrc]] FIXED_RANGE=10.254.1.0/24 ADMIN_PASSWORD=speciale LOGFILE=$DEST/logs/stack.sh.log Note that ``Q_PLUGIN_CONF_FILE`` is unique in that it is assumed to *NOT* start with a ``/`` (slash) character. A slash will need to be added: :: [[post-config|/$Q_PLUGIN_CONF_FILE]] Also note that the ``localrc`` section is sourced as a shell script fragment and MUST conform to the shell requirements, specifically no whitespace around ``=`` (equals). .. _minimal-configuration: Minimal Configuration ===================== While ``stack.sh`` is happy to run without a ``localrc`` section in ``local.conf``, devlife is better when there are a few minimal variables set. This is an example of a minimal configuration that touches the values that most often need to be set. - no logging - pre-set the passwords to prevent interactive prompts - move network ranges away from the local network (``FIXED_RANGE`` and ``FLOATING_RANGE``, commented out below) - set the host IP if detection is unreliable (``HOST_IP``, commented out below) :: [[local|localrc]] ADMIN_PASSWORD=secrete DATABASE_PASSWORD=$ADMIN_PASSWORD RABBIT_PASSWORD=$ADMIN_PASSWORD SERVICE_PASSWORD=$ADMIN_PASSWORD SERVICE_TOKEN=a682f596-76f3-11e3-b3b2-e716f9080d50 #FIXED_RANGE=172.31.1.0/24 #FLOATING_RANGE=192.168.20.0/25 #HOST_IP=10.3.4.5 If the ``*_PASSWORD`` variables are not set here you will be prompted to enter values for them by ``stack.sh``. The network ranges must not overlap with any networks in use on the host. Overlap is not uncommon as RFC-1918 'private' ranges are commonly used for both the local networking and Nova's fixed and floating ranges. ``HOST_IP`` is normally detected on the first run of ``stack.sh`` but often is indeterminate on later runs due to the IP being moved from an Ethernet interface to a bridge on the host. Setting it here also makes it available for ``openrc`` to set ``OS_AUTH_URL``. ``HOST_IP`` is not set by default. Common Configuration Variables ============================== Installation Directory ---------------------- | *Default: ``DEST=/opt/stack``* | The DevStack install directory is set by the ``DEST`` variable. | By setting it early in the ``localrc`` section you can reference it in later variables. It can be useful to set it even though it is not changed from the default value. | :: DEST=/opt/stack Libraries from Git ------------------ | *Default: ``LIBS_FROM_GIT=""``* | By default devstack installs OpenStack server components from git, however it installs client libraries from released versions on pypi. This is appropriate if you are working on server development, but if you want to see how an unreleased version of the client affects the system you can have devstack install it from upstream, or from local git trees. | Multiple libraries can be specified as a comma separated list. | :: LIBS_FROM_GIT=python-keystoneclient,oslo.config Virtual Environments -------------------- | *Default: ``USE_VENV=False``* | Enable the use of Python virtual environments by setting ``USE_VENV`` to ``True``. This will enable the creation of venvs for each project that is defined in the ``PROJECT_VENV`` array. | *Default: ``PROJECT_VENV['']='.venv'* | Each entry in the ``PROJECT_VENV`` array contains the directory name of a venv to be used for the project. The array index is the project name. Multiple projects can use the same venv if desired. :: PROJECT_VENV["glance"]=${GLANCE_DIR}.venv | *Default: ``ADDITIONAL_VENV_PACKAGES=""``* | A comma-separated list of additional packages to be installed into each venv. Often projects will not have certain packages listed in its ``requirements.txt`` file because they are 'optional' requirements, i.e. only needed for certain configurations. By default, the enabled databases will have their Python bindings added when they are enabled. Enable Logging -------------- | *Defaults: ``LOGFILE="" LOGDAYS=7 LOG_COLOR=True``* | By default ``stack.sh`` output is only written to the console where is runs. It can be sent to a file in addition to the console by setting ``LOGFILE`` to the fully-qualified name of the destination log file. A timestamp will be appended to the given filename for each run of ``stack.sh``. | :: LOGFILE=$DEST/logs/stack.sh.log Old log files are cleaned automatically if ``LOGDAYS`` is set to the number of days of old log files to keep. :: LOGDAYS=1 The some of the project logs (Nova, Cinder, etc) will be colorized by default (if ``SYSLOG`` is not set below); this can be turned off by setting ``LOG_COLOR`` False. :: LOG_COLOR=False Logging the Service Output -------------------------- | *Default: ``LOGDIR=""``* | DevStack will log the stdout output of the services it starts. When using ``screen`` this logs the output in the screen windows to a file. Without ``screen`` this simply redirects stdout of the service process to a file in ``LOGDIR``. | :: LOGDIR=$DEST/logs *Note the use of ``DEST`` to locate the main install directory; this is why we suggest setting it in ``local.conf``.* Enabling Syslog --------------- | *Default: ``SYSLOG=False SYSLOG_HOST=$HOST_IP SYSLOG_PORT=516``* | Logging all services to a single syslog can be convenient. Enable syslogging by setting ``SYSLOG`` to ``True``. If the destination log host is not localhost ``SYSLOG_HOST`` and ``SYSLOG_PORT`` can be used to direct the message stream to the log host. | :: SYSLOG=True SYSLOG_HOST=$HOST_IP SYSLOG_PORT=516 A clean install every time -------------------------- | *Default: ``RECLONE=""``* | By default ``stack.sh`` only clones the project repos if they do not exist in ``$DEST``. ``stack.sh`` will freshen each repo on each run if ``RECLONE`` is set to ``yes``. This avoids having to manually remove repos in order to get the current branch from ``$GIT_BASE``. | :: RECLONE=yes Upgrade packages installed by pip --------------------------------- | *Default: ``PIP_UPGRADE=""``* | By default ``stack.sh`` only installs Python packages if no version is currently installed or the current version does not match a specified requirement. If ``PIP_UPGRADE`` is set to ``True`` then existing required Python packages will be upgraded to the most recent version that matches requirements. | :: PIP_UPGRADE=True Swift ----- | Default: SWIFT_HASH="" | SWIFT_REPLICAS=1 | SWIFT_DATA_DIR=$DEST/data/swift | Swift is now used as the back-end for the S3-like object store. When enabled Nova's objectstore (n-obj in ENABLED_SERVICES) is automatically disabled. Enable Swift by adding it services to ENABLED_SERVICES: enable_service s-proxy s-object s-container s-account Setting Swift's hash value is required and you will be prompted for it if Swift is enabled so just set it to something already: :: SWIFT_HASH=66a3d6b56c1f479c8b4e70ab5c2000f5 For development purposes the default number of replicas is set to ``1`` to reduce the overhead required. To better simulate a production deployment set this to ``3`` or more. :: SWIFT_REPLICAS=3 The data for Swift is stored in the source tree by default (in ``$DEST/swift/data``) and can be moved by setting ``SWIFT_DATA_DIR``. The specified directory will be created if it does not exist. :: SWIFT_DATA_DIR=$DEST/data/swift *Note: Previously just enabling ``swift`` was sufficient to start the Swift services. That does not provide proper service granularity, particularly in multi-host configurations, and is considered deprecated. Some service combination tests now check for specific Swift services and the old blanket acceptance will longer work correctly.* Service Catalog Backend ----------------------- | *Default: ``KEYSTONE_CATALOG_BACKEND=sql``* | DevStack uses Keystone's ``sql`` service catalog backend. An alternate ``template`` backend is also available. However, it does not support the ``service-*`` and ``endpoint-*`` commands of the ``keystone`` CLI. To do so requires the ``sql`` backend be enabled: | :: KEYSTONE_CATALOG_BACKEND=template DevStack's default configuration in ``sql`` mode is set in ``files/keystone_data.sh`` Cinder ------ | Default: | VOLUME_GROUP="stack-volumes" VOLUME_NAME_PREFIX="volume-" VOLUME_BACKING_FILE_SIZE=10250M | The logical volume group used to hold the Cinder-managed volumes is set by ``VOLUME_GROUP``, the logical volume name prefix is set with ``VOLUME_NAME_PREFIX`` and the size of the volume backing file is set with ``VOLUME_BACKING_FILE_SIZE``. | :: VOLUME_GROUP="stack-volumes" VOLUME_NAME_PREFIX="volume-" VOLUME_BACKING_FILE_SIZE=10250M Multi-host DevStack ------------------- | *Default: ``MULTI_HOST=False``* | Running DevStack with multiple hosts requires a custom ``local.conf`` section for each host. The master is the same as a single host installation with ``MULTI_HOST=True``. The slaves have fewer services enabled and a couple of host variables pointing to the master. | **Master** :: MULTI_HOST=True **Slave** :: MYSQL_HOST=w.x.y.z RABBIT_HOST=w.x.y.z GLANCE_HOSTPORT=w.x.y.z:9292 ENABLED_SERVICES=n-vol,n-cpu,n-net,n-api IP Version | Default: ``IP_VERSION=4`` | This setting can be used to configure DevStack to create either an IPv4, IPv6, or dual stack tenant data network by setting ``IP_VERSION`` to either ``IP_VERSION=4``, ``IP_VERSION=6``, or ``IP_VERSION=4+6`` respectively. This functionality requires that the Neutron networking service is enabled by setting the following options: | :: disable_service n-net enable_service q-svc q-agt q-dhcp q-l3 | The following optional variables can be used to alter the default IPv6 behavior: | :: IPV6_RA_MODE=slaac IPV6_ADDRESS_MODE=slaac FIXED_RANGE_V6=fd$IPV6_GLOBAL_ID::/64 IPV6_PRIVATE_NETWORK_GATEWAY=fd$IPV6_GLOBAL_ID::1 | *Note: ``FIXED_RANGE_V6`` and ``IPV6_PRIVATE_NETWORK_GATEWAY`` can be configured with any valid IPv6 prefix. The default values make use of an auto-generated ``IPV6_GLOBAL_ID`` to comply with RFC 4193.* Examples ======== - Eliminate a Cinder pass-through (``CINDER_PERIODIC_INTERVAL``): :: [[post-config|$CINDER_CONF]] [DEFAULT] periodic_interval = 60 - Sample ``local.conf`` with screen logging enabled: :: [[local|localrc]] FIXED_RANGE=10.254.1.0/24 NETWORK_GATEWAY=10.254.1.1 LOGDAYS=1 LOGDIR=$DEST/logs LOGFILE=$LOGDIR/stack.sh.log ADMIN_PASSWORD=quiet DATABASE_PASSWORD=$ADMIN_PASSWORD RABBIT_PASSWORD=$ADMIN_PASSWORD SERVICE_PASSWORD=$ADMIN_PASSWORD SERVICE_TOKEN=a682f596-76f3-11e3-b3b2-e716f9080d50