devstack/lib/heat
Dean Troyer 699a29f72d Implement screen process stop() function
Implements screen process stop in ceilometer, cinder, glance, heat, n-vol

Change-Id: Ic5e02926f026d0e6f4b39846bfe77634dd414c60
2012-09-21 14:02:38 -05:00

186 lines
8.2 KiB
Plaintext

# lib/heat
# Install and start Heat service
# To enable, add the following to localrc
# ENABLED_SERVICES+=,heat,h-api-cfn,h-api-cw,h-eng,h-meta
# Dependencies:
# - functions
# stack.sh
# ---------
# install_XXX
# configure_XXX
# init_XXX
# start_XXX
# stop_XXX
# cleanup_XXX
# Save trace setting
XTRACE=$(set +o | grep xtrace)
set +o xtrace
# Defaults
# --------
HEAT_DIR=$DEST/heat
# set up default directories
# cleanup_heat() - Remove residual data files, anything left over from previous
# runs that a clean run would need to clean up
function cleanup_heat() {
# This function intentionally left blank
:
}
# configure_heat() - Set config files, create data dirs, etc
function configure_heat() {
setup_develop $HEAT_DIR
HEAT_CONF_DIR=/etc/heat
if [[ ! -d $HEAT_CONF_DIR ]]; then
sudo mkdir -p $HEAT_CONF_DIR
fi
sudo chown `whoami` $HEAT_CONF_DIR
HEAT_API_CFN_HOST=${HEAT_API_CFN_HOST:-$SERVICE_HOST}
HEAT_API_CFN_PORT=${HEAT_API_CFN_PORT:-8000}
HEAT_ENGINE_HOST=${HEAT_ENGINE_HOST:-$SERVICE_HOST}
HEAT_ENGINE_PORT=${HEAT_ENGINE_PORT:-8001}
HEAT_METADATA_HOST=${HEAT_METADATA_HOST:-$SERVICE_HOST}
HEAT_METADATA_PORT=${HEAT_METADATA_PORT:-8002}
HEAT_API_CW_HOST=${HEAT_API_CW_HOST:-$SERVICE_HOST}
HEAT_API_CW_PORT=${HEAT_API_CW_PORT:-8003}
# cloudformation api
HEAT_API_CFN_CONF=$HEAT_CONF_DIR/heat-api-cfn.conf
cp $HEAT_DIR/etc/heat/heat-api-cfn.conf $HEAT_API_CFN_CONF
iniset $HEAT_API_CFN_CONF DEFAULT debug True
inicomment $HEAT_API_CFN_CONF DEFAULT log_file
iniset $HEAT_API_CFN_CONF DEFAULT use_syslog $SYSLOG
iniset $HEAT_API_CFN_CONF DEFAULT bind_host $HEAT_API_CFN_HOST
iniset $HEAT_API_CFN_CONF DEFAULT bind_port $HEAT_API_CFN_PORT
if is_service_enabled rabbit; then
iniset $HEAT_API_CFN_CONF DEFAULT rpc_backend heat.openstack.common.rpc.impl_kombu
iniset $HEAT_API_CFN_CONF DEFAULT rabbit_password $RABBIT_PASSWORD
iniset $HEAT_API_CFN_CONF DEFAULT rabbit_host $RABBIT_HOST
elif is_service_enabled qpid; then
iniset $HEAT_API_CFN_CONF DEFAULT rpc_backend heat.openstack.common.rpc.impl_qpid
fi
HEAT_API_CFN_PASTE_INI=$HEAT_CONF_DIR/heat-api-cfn-paste.ini
cp $HEAT_DIR/etc/heat/heat-api-cfn-paste.ini $HEAT_API_CFN_PASTE_INI
iniset $HEAT_API_CFN_PASTE_INI filter:authtoken auth_host $KEYSTONE_AUTH_HOST
iniset $HEAT_API_CFN_PASTE_INI filter:authtoken auth_port $KEYSTONE_AUTH_PORT
iniset $HEAT_API_CFN_PASTE_INI filter:authtoken auth_protocol $KEYSTONE_AUTH_PROTOCOL
iniset $HEAT_API_CFN_PASTE_INI filter:authtoken auth_uri $KEYSTONE_SERVICE_PROTOCOL://$KEYSTONE_SERVICE_HOST:$KEYSTONE_SERVICE_PORT/v2.0
iniset $HEAT_API_CFN_PASTE_INI filter:authtoken admin_tenant_name $SERVICE_TENANT_NAME
iniset $HEAT_API_CFN_PASTE_INI filter:authtoken admin_user heat
iniset $HEAT_API_CFN_PASTE_INI filter:authtoken admin_password $SERVICE_PASSWORD
iniset $HEAT_API_CFN_PASTE_INI filter:ec2authtoken auth_uri $KEYSTONE_SERVICE_PROTOCOL://$KEYSTONE_SERVICE_HOST:$KEYSTONE_SERVICE_PORT/v2.0
iniset $HEAT_API_CFN_PASTE_INI filter:ec2authtoken keystone_ec2_uri $KEYSTONE_SERVICE_PROTOCOL://$KEYSTONE_SERVICE_HOST:$KEYSTONE_SERVICE_PORT/v2.0/ec2tokens
# engine
HEAT_ENGINE_CONF=$HEAT_CONF_DIR/heat-engine.conf
cp $HEAT_DIR/etc/heat/heat-engine.conf $HEAT_ENGINE_CONF
iniset $HEAT_ENGINE_CONF DEFAULT debug True
inicomment $HEAT_ENGINE_CONF DEFAULT log_file
iniset $HEAT_ENGINE_CONF DEFAULT use_syslog $SYSLOG
iniset $HEAT_ENGINE_CONF DEFAULT bind_host $HEAT_ENGINE_HOST
iniset $HEAT_ENGINE_CONF DEFAULT bind_port $HEAT_ENGINE_PORT
iniset $HEAT_ENGINE_CONF DEFAULT sql_connection $BASE_SQL_CONN/heat?charset=utf8
iniset $HEAT_ENGINE_CONF DEFAULT auth_encryption_key `hexdump -n 16 -v -e '/1 "%02x"' /dev/random`
if is_service_enabled rabbit; then
iniset $HEAT_ENGINE_CONF DEFAULT rpc_backend heat.openstack.common.rpc.impl_kombu
iniset $HEAT_ENGINE_CONF DEFAULT rabbit_password $RABBIT_PASSWORD
iniset $HEAT_ENGINE_CONF DEFAULT rabbit_host $RABBIT_HOST
elif is_service_enabled qpid; then
iniset $HEAT_ENGINE_CONF DEFAULT rpc_backend heat.openstack.common.rpc.impl_qpid
fi
# metadata api
HEAT_METADATA_CONF=$HEAT_CONF_DIR/heat-metadata.conf
cp $HEAT_DIR/etc/heat/heat-metadata.conf $HEAT_METADATA_CONF
iniset $HEAT_METADATA_CONF DEFAULT debug True
inicomment $HEAT_METADATA_CONF DEFAULT log_file
iniset $HEAT_METADATA_CONF DEFAULT use_syslog $SYSLOG
iniset $HEAT_METADATA_CONF DEFAULT bind_host $HEAT_METADATA_HOST
iniset $HEAT_METADATA_CONF DEFAULT bind_port $HEAT_METADATA_PORT
if is_service_enabled rabbit; then
iniset $HEAT_METADATA_CONF DEFAULT rpc_backend heat.openstack.common.rpc.impl_kombu
iniset $HEAT_METADATA_CONF DEFAULT rabbit_password $RABBIT_PASSWORD
iniset $HEAT_METADATA_CONF DEFAULT rabbit_host $RABBIT_HOST
elif is_service_enabled qpid; then
iniset $HEAT_METADATA_CONF DEFAULT rpc_backend heat.openstack.common.rpc.impl_qpid
fi
HEAT_METADATA_PASTE_INI=$HEAT_CONF_DIR/heat-metadata-paste.ini
cp $HEAT_DIR/etc/heat/heat-metadata-paste.ini $HEAT_METADATA_PASTE_INI
# cloudwatch api
HEAT_API_CW_CONF=$HEAT_CONF_DIR/heat-api-cloudwatch.conf
cp $HEAT_DIR/etc/heat/heat-api-cloudwatch.conf $HEAT_API_CW_CONF
iniset $HEAT_API_CW_CONF DEFAULT debug True
inicomment $HEAT_API_CW_CONF DEFAULT log_file
iniset $HEAT_API_CW_CONF DEFAULT use_syslog $SYSLOG
iniset $HEAT_API_CW_CONF DEFAULT bind_host $HEAT_API_CW_HOST
iniset $HEAT_API_CW_CONF DEFAULT bind_port $HEAT_API_CW_PORT
if is_service_enabled rabbit; then
iniset $HEAT_API_CW_CONF DEFAULT rpc_backend heat.openstack.common.rpc.impl_kombu
iniset $HEAT_API_CW_CONF DEFAULT rabbit_password $RABBIT_PASSWORD
iniset $HEAT_API_CW_CONF DEFAULT rabbit_host $RABBIT_HOST
elif is_service_enabled qpid; then
iniset $HEAT_API_CW_CONF DEFAULT rpc_backend heat.openstack.common.rpc.impl_qpid
fi
HEAT_API_CW_PASTE_INI=$HEAT_CONF_DIR/heat-api-cloudwatch-paste.ini
cp $HEAT_DIR/etc/heat/heat-api-cloudwatch-paste.ini $HEAT_API_CW_PASTE_INI
iniset $HEAT_API_CW_PASTE_INI filter:authtoken auth_host $KEYSTONE_AUTH_HOST
iniset $HEAT_API_CW_PASTE_INI filter:authtoken auth_port $KEYSTONE_AUTH_PORT
iniset $HEAT_API_CW_PASTE_INI filter:authtoken auth_protocol $KEYSTONE_AUTH_PROTOCOL
iniset $HEAT_API_CW_PASTE_INI filter:authtoken auth_uri $KEYSTONE_SERVICE_PROTOCOL://$KEYSTONE_SERVICE_HOST:$KEYSTONE_SERVICE_PORT/v2.0
iniset $HEAT_API_CW_PASTE_INI filter:authtoken admin_tenant_name $SERVICE_TENANT_NAME
iniset $HEAT_API_CW_PASTE_INI filter:authtoken admin_user heat
iniset $HEAT_API_CW_PASTE_INI filter:authtoken admin_password $SERVICE_PASSWORD
iniset $HEAT_API_CW_PASTE_INI filter:ec2authtoken auth_uri $KEYSTONE_SERVICE_PROTOCOL://$KEYSTONE_SERVICE_HOST:$KEYSTONE_SERVICE_PORT/v2.0
iniset $HEAT_API_CW_PASTE_INI filter:ec2authtoken keystone_ec2_uri $KEYSTONE_SERVICE_PROTOCOL://$KEYSTONE_SERVICE_HOST:$KEYSTONE_SERVICE_PORT/v2.0/ec2tokens
}
# init_heat() - Initialize database
function init_heat() {
# (re)create heat database
mysql -u$MYSQL_USER -p$MYSQL_PASSWORD -e 'DROP DATABASE IF EXISTS heat;'
mysql -u$MYSQL_USER -p$MYSQL_PASSWORD -e 'CREATE DATABASE heat CHARACTER SET utf8;'
$HEAT_DIR/bin/heat-db-setup $os_PACKAGE -r $MYSQL_PASSWORD
}
# install_heat() - Collect source and prepare
function install_heat() {
git_clone $HEAT_REPO $HEAT_DIR $HEAT_BRANCH
}
# start_heat() - Start running processes, including screen
function start_heat() {
screen_it h-eng "cd $HEAT_DIR; bin/heat-engine --config-file=$HEAT_CONF_DIR/heat-engine.conf"
screen_it h-api-cfn "cd $HEAT_DIR; bin/heat-api-cfn --config-dir=$HEAT_CONF_DIR/heat-api-cfn.conf"
screen_it h-api-cw "cd $HEAT_DIR; bin/heat-api-cloudwatch --config-dir=$HEAT_CONF_DIR/heat-api-cloudwatch.conf"
screen_it h-meta "cd $HEAT_DIR; bin/heat-metadata --config-dir=$HEAT_CONF_DIR/heat-metadata.conf"
}
# stop_heat() - Stop running processes
function stop_heat() {
# Kill the cinder screen windows
for serv in h-eng h-api-cfn h-api-cw h-meta; do
screen -S $SCREEN_NAME -p $serv -X kill
done
}
# Restore xtrace
$XTRACE