devstack/lib/apache
Stephen Finucane a6f3901a4b lib/apache: Reshuffle lines
Make it a little more obvious what the difference between the two helper
functions is.

Change-Id: I07ec34ecfcd2b7925485145c4b4bf68eda385a32
Signed-off-by: Stephen Finucane <sfinucan@redhat.com>
2024-05-14 14:14:26 +01:00

424 lines
16 KiB
Bash

#!/bin/bash
#
# lib/apache
# Functions to control configuration and operation of apache web server
# Dependencies:
#
# - ``functions`` file
# - ``STACK_USER`` must be defined
#
# lib/apache exports the following functions:
#
# - install_apache_wsgi
# - apache_site_config_for
# - enable_apache_site
# - disable_apache_site
# - start_apache_server
# - stop_apache_server
# - restart_apache_server
# Save trace setting
_XTRACE_LIB_APACHE=$(set +o | grep xtrace)
set +o xtrace
# Allow overriding the default Apache user and group, default to
# current user and his default group.
APACHE_USER=${APACHE_USER:-$STACK_USER}
APACHE_GROUP=${APACHE_GROUP:-$(id -gn $APACHE_USER)}
APACHE_LOCAL_HOST=$SERVICE_LOCAL_HOST
if [[ "$SERVICE_IP_VERSION" == 6 ]]; then
APACHE_LOCAL_HOST=[$APACHE_LOCAL_HOST]
fi
# Set up apache name and configuration directory
# Note that APACHE_CONF_DIR is really more accurately apache's vhost
# configuration dir but we can't just change this because public interfaces.
if is_ubuntu; then
APACHE_NAME=apache2
APACHE_CONF_DIR=${APACHE_CONF_DIR:-/etc/$APACHE_NAME/sites-available}
APACHE_SETTINGS_DIR=${APACHE_SETTINGS_DIR:-/etc/$APACHE_NAME/conf-enabled}
elif is_fedora; then
APACHE_NAME=httpd
APACHE_CONF_DIR=${APACHE_CONF_DIR:-/etc/$APACHE_NAME/conf.d}
APACHE_SETTINGS_DIR=${APACHE_SETTINGS_DIR:-/etc/$APACHE_NAME/conf.d}
fi
APACHE_LOG_DIR="/var/log/${APACHE_NAME}"
# Functions
# ---------
# Enable apache mod and restart apache if it isn't already enabled.
function enable_apache_mod {
local mod=$1
# Apache installation, because we mark it NOPRIME
if is_ubuntu; then
# Skip mod_version as it is not a valid mod to enable
# on debuntu, instead it is built in.
if [[ "$mod" != "version" ]] && ! a2query -m $mod ; then
sudo a2enmod $mod
restart_apache_server
fi
elif is_fedora; then
# pass
true
else
exit_distro_not_supported "apache enable mod"
fi
}
# NOTE(sdague): Install uwsgi including apache module, we need to get
# to 2.0.6+ to get a working mod_proxy_uwsgi. We can probably build a
# check for that and do it differently for different platforms.
function install_apache_uwsgi {
local apxs="apxs2"
if is_fedora; then
apxs="apxs"
fi
if is_ubuntu; then
local pkg_list="uwsgi uwsgi-plugin-python3 libapache2-mod-proxy-uwsgi"
install_package ${pkg_list}
# NOTE(ianw) 2022-02-03 : Fedora 35 needs to skip this and fall
# into the install-from-source because the upstream packages
# didn't fix Python 3.10 compatibility before release. Should be
# fixed in uwsgi 4.9.0; can remove this when packages available
# or we drop this release
elif is_fedora && ! is_openeuler && ! [[ $DISTRO =~ f36 ]]; then
# Note httpd comes with mod_proxy_uwsgi and it is loaded by
# default; the mod_proxy_uwsgi package actually conflicts now.
# See:
# https://bugzilla.redhat.com/show_bug.cgi?id=1574335
#
# Thus there is nothing else to do after this install
install_package uwsgi \
uwsgi-plugin-python3
else
# Compile uwsgi from source.
local dir
dir=$(mktemp -d)
pushd $dir
pip_install uwsgi
pip download uwsgi -c $REQUIREMENTS_DIR/upper-constraints.txt
local uwsgi
uwsgi=$(ls uwsgi*)
tar xvf $uwsgi
cd uwsgi*/apache2
sudo $apxs -i -c mod_proxy_uwsgi.c
popd
# delete the temp directory
sudo rm -rf $dir
fi
if is_ubuntu; then
# we've got to enable proxy and proxy_uwsgi for this to work
sudo a2enmod proxy
sudo a2enmod proxy_uwsgi
elif is_fedora; then
# redhat is missing a nice way to turn on/off modules
echo "LoadModule proxy_uwsgi_module modules/mod_proxy_uwsgi.so" \
| sudo tee /etc/httpd/conf.modules.d/02-proxy-uwsgi.conf
fi
restart_apache_server
}
# install_apache_wsgi() - Install Apache server and wsgi module
function install_apache_wsgi {
# Apache installation, because we mark it NOPRIME
if is_ubuntu; then
# Install apache2, which is NOPRIME'd
install_package apache2
if is_package_installed libapache2-mod-wsgi; then
uninstall_package libapache2-mod-wsgi
fi
install_package libapache2-mod-wsgi-py3
elif is_fedora; then
sudo rm -f /etc/httpd/conf.d/000-*
install_package httpd python3-mod_wsgi
# rpm distros dont enable httpd by default so enable it to support reboots.
sudo systemctl enable httpd
# For consistency with Ubuntu, switch to the worker mpm, as
# the default is event
sudo sed -i '/mod_mpm_prefork.so/s/^/#/g' /etc/httpd/conf.modules.d/00-mpm.conf
sudo sed -i '/mod_mpm_event.so/s/^/#/g' /etc/httpd/conf.modules.d/00-mpm.conf
sudo sed -i '/mod_mpm_worker.so/s/^#//g' /etc/httpd/conf.modules.d/00-mpm.conf
else
exit_distro_not_supported "apache wsgi installation"
fi
# WSGI isn't enabled by default, enable it
enable_apache_mod wsgi
}
# apache_site_config_for() - The filename of the site's configuration file.
# This function uses the global variables APACHE_NAME and APACHE_CONF_DIR.
#
# On Ubuntu 14.04+, the site configuration file must have a .conf suffix for a2ensite and a2dissite to
# recognise it. a2ensite and a2dissite ignore the .conf suffix used as parameter. The default sites'
# files are 000-default.conf and default-ssl.conf.
#
# On Fedora, any file in /etc/httpd/conf.d/ whose name ends with .conf is enabled.
#
# On RHEL and CentOS, things should hopefully work as in Fedora.
#
# The table below summarizes what should happen on each distribution:
# +----------------------+--------------------+--------------------------+--------------------------+
# | Distribution | File name | Site enabling command | Site disabling command |
# +----------------------+--------------------+--------------------------+--------------------------+
# | Ubuntu 14.04 | site.conf | a2ensite site | a2dissite site |
# | Fedora, RHEL, CentOS | site.conf.disabled | mv site.conf{.disabled,} | mv site.conf{,.disabled} |
# +----------------------+--------------------+--------------------------+--------------------------+
function apache_site_config_for {
local site=$@
if is_ubuntu; then
# Ubuntu 14.04 - Apache 2.4
echo $APACHE_CONF_DIR/${site}.conf
elif is_fedora; then
# fedora conf.d is only imported if it ends with .conf so this is approx the same
local enabled_site_file="$APACHE_CONF_DIR/${site}.conf"
if [ -f $enabled_site_file ]; then
echo ${enabled_site_file}
else
echo ${enabled_site_file}.disabled
fi
fi
}
# enable_apache_site() - Enable a particular apache site
function enable_apache_site {
local site=$@
# Many of our sites use mod version. Just enable it.
enable_apache_mod version
if is_ubuntu; then
sudo a2ensite ${site}
elif is_fedora; then
local enabled_site_file="$APACHE_CONF_DIR/${site}.conf"
# Do nothing if site already enabled or no site config exists
if [[ -f ${enabled_site_file}.disabled ]] && [[ ! -f ${enabled_site_file} ]]; then
sudo mv ${enabled_site_file}.disabled ${enabled_site_file}
fi
fi
}
# disable_apache_site() - Disable a particular apache site
function disable_apache_site {
local site=$@
if is_ubuntu; then
sudo a2dissite ${site} || true
elif is_fedora; then
local enabled_site_file="$APACHE_CONF_DIR/${site}.conf"
# Do nothing if no site config exists
if [[ -f ${enabled_site_file} ]]; then
sudo mv ${enabled_site_file} ${enabled_site_file}.disabled
fi
fi
}
# start_apache_server() - Start running apache server
function start_apache_server {
start_service $APACHE_NAME
}
# stop_apache_server() - Stop running apache server
function stop_apache_server {
if [ -n "$APACHE_NAME" ]; then
stop_service $APACHE_NAME
else
exit_distro_not_supported "apache configuration"
fi
}
# restart_apache_server
function restart_apache_server {
# Apache can be slow to stop, doing an explicit stop, sleep, start helps
# to mitigate issues where apache will claim a port it's listening on is
# still in use and fail to start.
restart_service $APACHE_NAME
}
# write_uwsgi_config() - Create a new uWSGI config file
function write_uwsgi_config {
local conf=$1
local wsgi=$2
local url=$3
local http=$4
local name=$5
if [ -z "$name" ]; then
name=$(basename $wsgi)
fi
# create a home for the sockets; note don't use /tmp -- apache has
# a private view of it on some platforms.
local socket_dir='/var/run/uwsgi'
# /var/run will be empty on ubuntu after reboot, so we can use systemd-temptiles
# to automatically create $socket_dir.
sudo mkdir -p /etc/tmpfiles.d/
echo "d $socket_dir 0755 $STACK_USER root" | sudo tee /etc/tmpfiles.d/uwsgi.conf
sudo systemd-tmpfiles --create /etc/tmpfiles.d/uwsgi.conf
local socket="$socket_dir/${name}.socket"
# always cleanup given that we are using iniset here
rm -rf $conf
# Set either the module path or wsgi script path depending on what we've
# been given. Note that the regex isn't exhaustive - neither Python modules
# nor Python variables can start with a number - but it's "good enough"
if [[ "$wsgi" =~ ^[a-zA-Z0-9_.]+:[a-zA-Z0-9_]+$ ]]; then
iniset "$conf" uwsgi module "$wsgi"
else
deprecated 'Configuring uWSGI with a WSGI file is deprecated, use module paths instead'
iniset "$conf" uwsgi wsgi-file "$wsgi"
fi
iniset "$conf" uwsgi processes $API_WORKERS
# This is running standalone
iniset "$conf" uwsgi master true
# Set die-on-term & exit-on-reload so that uwsgi shuts down
iniset "$conf" uwsgi die-on-term true
iniset "$conf" uwsgi exit-on-reload false
# Set worker-reload-mercy so that worker will not exit till the time
# configured after graceful shutdown
iniset "$conf" uwsgi worker-reload-mercy $WORKER_TIMEOUT
iniset "$conf" uwsgi enable-threads true
iniset "$conf" uwsgi plugins http,python3
# uwsgi recommends this to prevent thundering herd on accept.
iniset "$conf" uwsgi thunder-lock true
# Set hook to trigger graceful shutdown on SIGTERM
iniset "$conf" uwsgi hook-master-start "unix_signal:15 gracefully_kill_them_all"
# Override the default size for headers from the 4k default.
iniset "$conf" uwsgi buffer-size 65535
# Make sure the client doesn't try to re-use the connection.
iniset "$conf" uwsgi add-header "Connection: close"
# This ensures that file descriptors aren't shared between processes.
iniset "$conf" uwsgi lazy-apps true
# If we said bind directly to http, then do that and don't start the apache proxy
if [[ -n "$http" ]]; then
iniset "$conf" uwsgi http $http
else
local apache_conf=""
apache_conf=$(apache_site_config_for $name)
iniset "$conf" uwsgi socket "$socket"
iniset "$conf" uwsgi chmod-socket 666
echo "ProxyPass \"${url}\" \"unix:${socket}|uwsgi://uwsgi-uds-${name}\" retry=0 acquire=1 " | sudo tee -a $apache_conf
enable_apache_site $name
restart_apache_server
fi
}
# For services using chunked encoding, the only services known to use this
# currently are Glance and Swift, we need to use an http proxy instead of
# mod_proxy_uwsgi because the chunked encoding gets dropped. See:
# https://github.com/unbit/uwsgi/issues/1540 You can workaround this on python2
# but that involves having apache buffer the request before sending it to
# uwsgi.
function write_local_uwsgi_http_config {
local conf=$1
local wsgi=$2
local url=$3
local name=$4
if [ -z "$name" ]; then
name=$(basename $wsgi)
fi
# create a home for the sockets; note don't use /tmp -- apache has
# a private view of it on some platforms.
# always cleanup given that we are using iniset here
rm -rf $conf
# Set either the module path or wsgi script path depending on what we've
# been given
if [[ "$wsgi" =~ ^[a-zA-Z0-9_.]+:[a-zA-Z0-9_]+$ ]]; then
iniset "$conf" uwsgi module "$wsgi"
else
deprecated 'Configuring uWSGI with a WSGI file is deprecated, use module paths instead'
iniset "$conf" uwsgi wsgi-file "$wsgi"
fi
port=$(get_random_port)
iniset "$conf" uwsgi http-socket "$APACHE_LOCAL_HOST:$port"
iniset "$conf" uwsgi processes $API_WORKERS
# This is running standalone
iniset "$conf" uwsgi master true
# Set die-on-term & exit-on-reload so that uwsgi shuts down
iniset "$conf" uwsgi die-on-term true
iniset "$conf" uwsgi exit-on-reload false
# Set worker-reload-mercy so that worker will not exit till the time
# configured after graceful shutdown
iniset "$conf" uwsgi worker-reload-mercy $WORKER_TIMEOUT
iniset "$conf" uwsgi enable-threads true
iniset "$conf" uwsgi plugins http,python3
# uwsgi recommends this to prevent thundering herd on accept.
iniset "$conf" uwsgi thunder-lock true
# Set hook to trigger graceful shutdown on SIGTERM
iniset "$conf" uwsgi hook-master-start "unix_signal:15 gracefully_kill_them_all"
# Override the default size for headers from the 4k default.
iniset "$conf" uwsgi buffer-size 65535
# Make sure the client doesn't try to re-use the connection.
iniset "$conf" uwsgi add-header "Connection: close"
# This ensures that file descriptors aren't shared between processes.
iniset "$conf" uwsgi lazy-apps true
iniset "$conf" uwsgi chmod-socket 666
iniset "$conf" uwsgi http-raw-body true
iniset "$conf" uwsgi http-chunked-input true
iniset "$conf" uwsgi http-auto-chunked true
iniset "$conf" uwsgi http-keepalive false
# Increase socket timeout for slow chunked uploads
iniset "$conf" uwsgi socket-timeout 30
enable_apache_mod proxy
enable_apache_mod proxy_http
local apache_conf=""
apache_conf=$(apache_site_config_for $name)
echo "KeepAlive Off" | sudo tee $apache_conf
echo "SetEnv proxy-sendchunked 1" | sudo tee -a $apache_conf
echo "ProxyPass \"${url}\" \"http://$APACHE_LOCAL_HOST:$port\" retry=0 acquire=1 " | sudo tee -a $apache_conf
enable_apache_site $name
restart_apache_server
}
# Write a straight-through proxy for a service that runs locally and just needs
# to be reachable via the main http proxy at $loc
function write_local_proxy_http_config {
local name=$1
local url=$2
local loc=$3
local apache_conf
apache_conf=$(apache_site_config_for $name)
enable_apache_mod proxy
enable_apache_mod proxy_http
echo "KeepAlive Off" | sudo tee $apache_conf
echo "SetEnv proxy-sendchunked 1" | sudo tee -a $apache_conf
echo "ProxyPass \"${loc}\" \"$url\" retry=0 acquire=1 " | sudo tee -a $apache_conf
enable_apache_site $name
restart_apache_server
}
function remove_uwsgi_config {
local conf=$1
local wsgi=$2
local name=""
# TODO(stephenfin): Remove this call when everyone is using module path
# configuration instead of file path configuration
name=$(basename $wsgi)
if [[ "$wsgi" = /* ]]; then
deprecated "Passing a wsgi script to remove_uwsgi_config is deprecated, pass an application name instead"
fi
rm -rf $conf
disable_apache_site $name
}
# Restore xtrace
$_XTRACE_LIB_APACHE
# Tell emacs to use shell-script-mode
## Local variables:
## mode: shell-script
## End: