openstack/devstack
Code Issues Proposed changes
8e58c0736f
devstack/lib/neutron

841 lines
32 KiB
Plaintext
Raw Blame History

# lib/neutron
# functions - funstions specific to neutron
# Dependencies:
# ``functions`` file
# ``DEST`` must be defined
# ``stack.sh`` calls the entry points in this order:
#
# install_neutron
# install_neutronclient
# install_neutron_agent_packages
# install_neutron_third_party
# configure_neutron
# init_neutron
# configure_neutron_third_party
# init_neutron_third_party
# start_neutron_third_party
# create_nova_conf_neutron
# start_neutron_service_and_check
# create_neutron_initial_network
# setup_neutron_debug
# start_neutron_agents
#
# ``unstack.sh`` calls the entry points in this order:
#
# stop_neutron
# Functions in lib/neutron are classified into the following categories:
#
# - entry points (called from stack.sh or unstack.sh)
# - internal functions
# - neutron exercises
# - 3rd party programs
# Neutron Networking
# ------------------
# Make sure that neutron is enabled in ``ENABLED_SERVICES``. If you want
# to run Neutron on this host, make sure that q-svc is also in
# ``ENABLED_SERVICES``.
#
# If you're planning to use the Neutron openvswitch plugin, set
# ``Q_PLUGIN`` to "openvswitch" and make sure the q-agt service is enabled
# in ``ENABLED_SERVICES``. If you're planning to use the Neutron
# linuxbridge plugin, set ``Q_PLUGIN`` to "linuxbridge" and make sure the
# q-agt service is enabled in ``ENABLED_SERVICES``.
#
# See "Neutron Network Configuration" below for additional variables
# that must be set in localrc for connectivity across hosts with
# Neutron.
#
# With Neutron networking the NETWORK_MANAGER variable is ignored.
#
# To enable specific configuration options for either the Open vSwitch or
# LinuxBridge plugin, please see the top level README file under the
# Neutron section.
# Save trace setting
XTRACE=$(set +o | grep xtrace)
set +o xtrace
# Neutron Network Configuration
# -----------------------------
# Gateway and subnet defaults, in case they are not customized in localrc
NETWORK_GATEWAY=${NETWORK_GATEWAY:-10.0.0.1}
PUBLIC_NETWORK_GATEWAY=${PUBLIC_NETWORK_GATEWAY:-172.24.4.225}
PRIVATE_SUBNET_NAME=${PRIVATE_SUBNET_NAME:-"private-subnet"}
PUBLIC_SUBNET_NAME=${PUBLIC_SUBNET_NAME:-"public-subnet"}
# Set up default directories
NEUTRON_DIR=$DEST/neutron
NEUTRONCLIENT_DIR=$DEST/python-neutronclient
NEUTRON_AUTH_CACHE_DIR=${NEUTRON_AUTH_CACHE_DIR:-/var/cache/neutron}
# Support entry points installation of console scripts
if [[ -d $NEUTRON_DIR/bin/neutron-server ]]; then
NEUTRON_BIN_DIR=$NEUTRON_DIR/bin
else
NEUTRON_BIN_DIR=$(get_python_exec_prefix)
fi
NEUTRON_CONF_DIR=/etc/neutron
NEUTRON_CONF=$NEUTRON_CONF_DIR/neutron.conf
export NEUTRON_TEST_CONFIG_FILE=${NEUTRON_TEST_CONFIG_FILE:-"$NEUTRON_CONF_DIR/debug.ini"}
# Default Neutron Plugin
Q_PLUGIN=${Q_PLUGIN:-openvswitch}
# Default Neutron Port
Q_PORT=${Q_PORT:-9696}
# Default Neutron Host
Q_HOST=${Q_HOST:-$SERVICE_HOST}
# Default admin username
Q_ADMIN_USERNAME=${Q_ADMIN_USERNAME:-neutron}
# Default auth strategy
Q_AUTH_STRATEGY=${Q_AUTH_STRATEGY:-keystone}
# Use namespace or not
Q_USE_NAMESPACE=${Q_USE_NAMESPACE:-True}
# RHEL's support for namespaces requires using veths with ovs
Q_OVS_USE_VETH=${Q_OVS_USE_VETH:-False}
Q_USE_ROOTWRAP=${Q_USE_ROOTWRAP:-True}
# Meta data IP
Q_META_DATA_IP=${Q_META_DATA_IP:-$SERVICE_HOST}
# Allow Overlapping IP among subnets
Q_ALLOW_OVERLAPPING_IP=${Q_ALLOW_OVERLAPPING_IP:-True}
# Use neutron-debug command
Q_USE_DEBUG_COMMAND=${Q_USE_DEBUG_COMMAND:-False}
# The name of the default q-l3 router
Q_ROUTER_NAME=${Q_ROUTER_NAME:-router1}
# List of config file names in addition to the main plugin config file
# See _configure_neutron_common() for details about setting it up
declare -a Q_PLUGIN_EXTRA_CONF_FILES
if is_service_enabled neutron; then
Q_RR_CONF_FILE=$NEUTRON_CONF_DIR/rootwrap.conf
if [[ "$Q_USE_ROOTWRAP" == "False" ]]; then
Q_RR_COMMAND="sudo"
else
NEUTRON_ROOTWRAP=$(get_rootwrap_location neutron)
Q_RR_COMMAND="sudo $NEUTRON_ROOTWRAP $Q_RR_CONF_FILE"
fi
# Provider Network Configurations
# --------------------------------
# The following variables control the Neutron openvswitch and
# linuxbridge plugins' allocation of tenant networks and
# availability of provider networks. If these are not configured
# in ``localrc``, tenant networks will be local to the host (with no
# remote connectivity), and no physical resources will be
# available for the allocation of provider networks.
# To use GRE tunnels for tenant networks, set to True in
# ``localrc``. GRE tunnels are only supported by the openvswitch
# plugin, and currently only on Ubuntu.
ENABLE_TENANT_TUNNELS=${ENABLE_TENANT_TUNNELS:-False}
# If using GRE tunnels for tenant networks, specify the range of
# tunnel IDs from which tenant networks are allocated. Can be
# overriden in ``localrc`` in necesssary.
TENANT_TUNNEL_RANGES=${TENANT_TUNNEL_RANGE:-1:1000}
# To use VLANs for tenant networks, set to True in localrc. VLANs
# are supported by the openvswitch and linuxbridge plugins, each
# requiring additional configuration described below.
ENABLE_TENANT_VLANS=${ENABLE_TENANT_VLANS:-False}
# If using VLANs for tenant networks, set in ``localrc`` to specify
# the range of VLAN VIDs from which tenant networks are
# allocated. An external network switch must be configured to
# trunk these VLANs between hosts for multi-host connectivity.
#
# Example: ``TENANT_VLAN_RANGE=1000:1999``
TENANT_VLAN_RANGE=${TENANT_VLAN_RANGE:-}
# If using VLANs for tenant networks, or if using flat or VLAN
# provider networks, set in ``localrc`` to the name of the physical
# network, and also configure ``OVS_PHYSICAL_BRIDGE`` for the
# openvswitch agent or ``LB_PHYSICAL_INTERFACE`` for the linuxbridge
# agent, as described below.
#
# Example: ``PHYSICAL_NETWORK=default``
PHYSICAL_NETWORK=${PHYSICAL_NETWORK:-}
# With the openvswitch plugin, if using VLANs for tenant networks,
# or if using flat or VLAN provider networks, set in ``localrc`` to
# the name of the OVS bridge to use for the physical network. The
# bridge will be created if it does not already exist, but a
# physical interface must be manually added to the bridge as a
# port for external connectivity.
#
# Example: ``OVS_PHYSICAL_BRIDGE=br-eth1``
OVS_PHYSICAL_BRIDGE=${OVS_PHYSICAL_BRIDGE:-}
# With the linuxbridge plugin, if using VLANs for tenant networks,
# or if using flat or VLAN provider networks, set in ``localrc`` to
# the name of the network interface to use for the physical
# network.
#
# Example: ``LB_PHYSICAL_INTERFACE=eth1``
LB_PHYSICAL_INTERFACE=${LB_PHYSICAL_INTERFACE:-}
# With the openvswitch plugin, set to True in ``localrc`` to enable
# provider GRE tunnels when ``ENABLE_TENANT_TUNNELS`` is False.
#
# Example: ``OVS_ENABLE_TUNNELING=True``
OVS_ENABLE_TUNNELING=${OVS_ENABLE_TUNNELING:-$ENABLE_TENANT_TUNNELS}
fi
# Neutron plugin specific functions
# ---------------------------------
# Please refer to ``lib/neutron_plugins/README.md`` for details.
source $TOP_DIR/lib/neutron_plugins/$Q_PLUGIN
# Agent loadbalancer service plugin functions
# -------------------------------------------
# Hardcoding for 1 service plugin for now
source $TOP_DIR/lib/neutron_plugins/services/loadbalancer
# VPN service plugin functions
# -------------------------------------------
# Hardcoding for 1 service plugin for now
source $TOP_DIR/lib/neutron_plugins/services/vpn
# Use security group or not
if has_neutron_plugin_security_group; then
Q_USE_SECGROUP=${Q_USE_SECGROUP:-True}
else
Q_USE_SECGROUP=False
fi
# Functions
# ---------
# configure_neutron()
# Set common config for all neutron server and agents.
function configure_neutron() {
_configure_neutron_common
iniset_rpc_backend neutron $NEUTRON_CONF DEFAULT
# goes before q-svc to init Q_SERVICE_PLUGIN_CLASSES
if is_service_enabled q-lbaas; then
_configure_neutron_lbaas
fi
if is_service_enabled q-vpn; then
_configure_neutron_vpn
fi
if is_service_enabled q-svc; then
_configure_neutron_service
fi
if is_service_enabled q-agt; then
_configure_neutron_plugin_agent
fi
if is_service_enabled q-dhcp; then
_configure_neutron_dhcp_agent
fi
if is_service_enabled q-l3; then
_configure_neutron_l3_agent
fi
if is_service_enabled q-meta; then
_configure_neutron_metadata_agent
fi
_configure_neutron_debug_command
}
function create_nova_conf_neutron() {
iniset $NOVA_CONF DEFAULT network_api_class "nova.network.quantumv2.api.API"
iniset $NOVA_CONF DEFAULT quantum_admin_username "$Q_ADMIN_USERNAME"
iniset $NOVA_CONF DEFAULT quantum_admin_password "$SERVICE_PASSWORD"
iniset $NOVA_CONF DEFAULT quantum_admin_auth_url "$KEYSTONE_SERVICE_PROTOCOL://$KEYSTONE_SERVICE_HOST:$KEYSTONE_AUTH_PORT/v2.0"
iniset $NOVA_CONF DEFAULT quantum_auth_strategy "$Q_AUTH_STRATEGY"
iniset $NOVA_CONF DEFAULT quantum_admin_tenant_name "$SERVICE_TENANT_NAME"
iniset $NOVA_CONF DEFAULT quantum_region_name "RegionOne"
iniset $NOVA_CONF DEFAULT quantum_url "http://$Q_HOST:$Q_PORT"
if [[ "$Q_USE_SECGROUP" == "True" ]]; then
LIBVIRT_FIREWALL_DRIVER=nova.virt.firewall.NoopFirewallDriver
iniset $NOVA_CONF DEFAULT security_group_api quantum
fi
# set NOVA_VIF_DRIVER and optionally set options in nova_conf
neutron_plugin_create_nova_conf
iniset $NOVA_CONF DEFAULT libvirt_vif_driver "$NOVA_VIF_DRIVER"
iniset $NOVA_CONF DEFAULT linuxnet_interface_driver "$LINUXNET_VIF_DRIVER"
if is_service_enabled q-meta; then
iniset $NOVA_CONF DEFAULT service_quantum_metadata_proxy "True"
fi
}
# create_neutron_accounts() - Set up common required neutron accounts
# Tenant User Roles
# ------------------------------------------------------------------
# service neutron admin # if enabled
# Migrated from keystone_data.sh
function create_neutron_accounts() {
SERVICE_TENANT=$(keystone tenant-list | awk "/ $SERVICE_TENANT_NAME / { print \$2 }")
ADMIN_ROLE=$(keystone role-list | awk "/ admin / { print \$2 }")
if [[ "$ENABLED_SERVICES" =~ "q-svc" ]]; then
NEUTRON_USER=$(keystone user-create \
--name=neutron \
--pass="$SERVICE_PASSWORD" \
--tenant_id $SERVICE_TENANT \
--email=neutron@example.com \
| grep " id " | get_field 2)
keystone user-role-add \
--tenant_id $SERVICE_TENANT \
--user_id $NEUTRON_USER \
--role_id $ADMIN_ROLE
if [[ "$KEYSTONE_CATALOG_BACKEND" = 'sql' ]]; then
NEUTRON_SERVICE=$(keystone service-create \
--name=neutron \
--type=network \
--description="Neutron Service" \
| grep " id " | get_field 2)
keystone endpoint-create \
--region RegionOne \
--service_id $NEUTRON_SERVICE \
--publicurl "http://$SERVICE_HOST:9696/" \
--adminurl "http://$SERVICE_HOST:9696/" \
--internalurl "http://$SERVICE_HOST:9696/"
fi
fi
}
function create_neutron_initial_network() {
TENANT_ID=$(keystone tenant-list | grep " demo " | get_field 1)
# Create a small network
# Since neutron command is executed in admin context at this point,
# ``--tenant_id`` needs to be specified.
if is_baremetal; then
sudo ovs-vsctl add-port $OVS_PHYSICAL_BRIDGE $PUBLIC_INTERFACE
for IP in $(ip addr show dev $PUBLIC_INTERFACE | grep ' inet ' | awk '{print $2}'); do
sudo ip addr del $IP dev $PUBLIC_INTERFACE
sudo ip addr add $IP dev $OVS_PHYSICAL_BRIDGE
done
NET_ID=$(neutron net-create $PHYSICAL_NETWORK --tenant_id $TENANT_ID --provider:network_type flat --provider:physical_network "$PHYSICAL_NETWORK" | grep ' id ' | get_field 2)
SUBNET_ID=$(neutron subnet-create --tenant_id $TENANT_ID --ip_version 4 ${ALLOCATION_POOL:+--allocation-pool $ALLOCATION_POOL} --gateway $NETWORK_GATEWAY --name $PRIVATE_SUBNET_NAME $NET_ID $FIXED_RANGE | grep ' id ' | get_field 2)
sudo ifconfig $OVS_PHYSICAL_BRIDGE up
else
NET_ID=$(neutron net-create --tenant_id $TENANT_ID "$PRIVATE_NETWORK_NAME" | grep ' id ' | get_field 2)
SUBNET_ID=$(neutron subnet-create --tenant_id $TENANT_ID --ip_version 4 --gateway $NETWORK_GATEWAY --name $PRIVATE_SUBNET_NAME $NET_ID $FIXED_RANGE | grep ' id ' | get_field 2)
fi
if [[ "$Q_L3_ENABLED" == "True" ]]; then
# Create a router, and add the private subnet as one of its interfaces
if [[ "$Q_L3_ROUTER_PER_TENANT" == "True" ]]; then
# create a tenant-owned router.
ROUTER_ID=$(neutron router-create --tenant_id $TENANT_ID $Q_ROUTER_NAME | grep ' id ' | get_field 2)
else
# Plugin only supports creating a single router, which should be admin owned.
ROUTER_ID=$(neutron router-create $Q_ROUTER_NAME | grep ' id ' | get_field 2)
fi
neutron router-interface-add $ROUTER_ID $SUBNET_ID
# Create an external network, and a subnet. Configure the external network as router gw
EXT_NET_ID=$(neutron net-create "$PUBLIC_NETWORK_NAME" -- --router:external=True | grep ' id ' | get_field 2)
EXT_GW_IP=$(neutron subnet-create --ip_version 4 ${Q_FLOATING_ALLOCATION_POOL:+--allocation-pool $Q_FLOATING_ALLOCATION_POOL} --gateway $PUBLIC_NETWORK_GATEWAY --name $PUBLIC_SUBNET_NAME $EXT_NET_ID $FLOATING_RANGE -- --enable_dhcp=False | grep 'gateway_ip' | get_field 2)
neutron router-gateway-set $ROUTER_ID $EXT_NET_ID
if is_service_enabled q-l3; then
# logic is specific to using the l3-agent for l3
if is_neutron_ovs_base_plugin && [[ "$Q_USE_NAMESPACE" = "True" ]]; then
CIDR_LEN=${FLOATING_RANGE#*/}
sudo ip addr add $EXT_GW_IP/$CIDR_LEN dev $PUBLIC_BRIDGE
sudo ip link set $PUBLIC_BRIDGE up
ROUTER_GW_IP=`neutron port-list -c fixed_ips -c device_owner | grep router_gateway | awk -F '"' '{ print $8; }'`
sudo route add -net $FIXED_RANGE gw $ROUTER_GW_IP
fi
if [[ "$Q_USE_NAMESPACE" == "False" ]]; then
# Explicitly set router id in l3 agent configuration
iniset $Q_L3_CONF_FILE DEFAULT router_id $ROUTER_ID
fi
fi
fi
}
# init_neutron() - Initialize databases, etc.
function init_neutron() {
:
}
# install_neutron() - Collect source and prepare
function install_neutron() {
git_clone $NEUTRON_REPO $NEUTRON_DIR $NEUTRON_BRANCH
setup_develop $NEUTRON_DIR
}
# install_neutronclient() - Collect source and prepare
function install_neutronclient() {
git_clone $NEUTRONCLIENT_REPO $NEUTRONCLIENT_DIR $NEUTRONCLIENT_BRANCH
setup_develop $NEUTRONCLIENT_DIR
}
# install_neutron_agent_packages() - Collect source and prepare
function install_neutron_agent_packages() {
# install packages that are specific to plugin agent(s)
if is_service_enabled q-agt q-dhcp q-l3; then
neutron_plugin_install_agent_packages
fi
if is_service_enabled q-lbaas; then
neutron_agent_lbaas_install_agent_packages
fi
}
# Start running processes, including screen
function start_neutron_service_and_check() {
# build config-file options
local cfg_file
local CFG_FILE_OPTIONS="--config-file $NEUTRON_CONF --config-file /$Q_PLUGIN_CONF_FILE"
for cfg_file in ${Q_PLUGIN_EXTRA_CONF_FILES[@]}; do
CFG_FILE_OPTIONS+=" --config-file /$cfg_file"
done
# Start the Neutron service
screen_it q-svc "cd $NEUTRON_DIR && python $NEUTRON_BIN_DIR/neutron-server $CFG_FILE_OPTIONS"
echo "Waiting for Neutron to start..."
if ! timeout $SERVICE_TIMEOUT sh -c "while ! http_proxy= wget -q -O- http://$Q_HOST:$Q_PORT; do sleep 1; done"; then
die $LINENO "Neutron did not start"
fi
}
# Start running processes, including screen
function start_neutron_agents() {
# Start up the neutron agents if enabled
screen_it q-agt "cd $NEUTRON_DIR && python $AGENT_BINARY --config-file $NEUTRON_CONF --config-file /$Q_PLUGIN_CONF_FILE"
screen_it q-dhcp "cd $NEUTRON_DIR && python $AGENT_DHCP_BINARY --config-file $NEUTRON_CONF --config-file=$Q_DHCP_CONF_FILE"
screen_it q-l3 "cd $NEUTRON_DIR && python $AGENT_L3_BINARY --config-file $NEUTRON_CONF --config-file=$Q_L3_CONF_FILE"
screen_it q-meta "cd $NEUTRON_DIR && python $AGENT_META_BINARY --config-file $NEUTRON_CONF --config-file=$Q_META_CONF_FILE"
if [ "$VIRT_DRIVER" = 'xenserver' ]; then
# For XenServer, start an agent for the domU openvswitch
screen_it q-domua "cd $NEUTRON_DIR && python $AGENT_BINARY --config-file $NEUTRON_CONF --config-file /$Q_PLUGIN_CONF_FILE.domU"
fi
if is_service_enabled q-lbaas; then
screen_it q-lbaas "cd $NEUTRON_DIR && python $AGENT_LBAAS_BINARY --config-file $NEUTRON_CONF --config-file=$LBAAS_AGENT_CONF_FILENAME"
fi
}
# stop_neutron() - Stop running processes (non-screen)
function stop_neutron() {
if is_service_enabled q-dhcp; then
pid=$(ps aux | awk '/[d]nsmasq.+interface=(tap|ns-)/ { print $2 }')
[ ! -z "$pid" ] && sudo kill -9 $pid
fi
if is_service_enabled q-meta; then
pid=$(ps aux | awk '/neutron-ns-metadata-proxy/ { print $2 }')
[ ! -z "$pid" ] && sudo kill -9 $pid
fi
}
# cleanup_neutron() - Remove residual data files, anything left over from previous
# runs that a clean run would need to clean up
function cleanup_neutron() {
if is_neutron_ovs_base_plugin; then
neutron_ovs_base_cleanup
fi
# delete all namespaces created by neutron
for ns in $(sudo ip netns list | grep -o -e qdhcp-[0-9a-f\-]* -e qrouter-[0-9a-f\-]*); do
sudo ip netns delete ${ns}
done
}
# _configure_neutron_common()
# Set common config for all neutron server and agents.
# This MUST be called before other ``_configure_neutron_*`` functions.
function _configure_neutron_common() {
# Put config files in ``NEUTRON_CONF_DIR`` for everyone to find
if [[ ! -d $NEUTRON_CONF_DIR ]]; then
sudo mkdir -p $NEUTRON_CONF_DIR
fi
sudo chown $STACK_USER $NEUTRON_CONF_DIR
cp $NEUTRON_DIR/etc/neutron.conf $NEUTRON_CONF
# Set plugin-specific variables ``Q_DB_NAME``, ``Q_PLUGIN_CLASS``.
# For main plugin config file, set ``Q_PLUGIN_CONF_PATH``, ``Q_PLUGIN_CONF_FILENAME``.
# For addition plugin config files, set ``Q_PLUGIN_EXTRA_CONF_PATH``,
# ``Q_PLUGIN_EXTRA_CONF_FILES``. For example:
# ``Q_PLUGIN_EXTRA_CONF_FILES=(file1, file2)``
neutron_plugin_configure_common
if [[ $Q_PLUGIN_CONF_PATH == '' || $Q_PLUGIN_CONF_FILENAME == '' || $Q_PLUGIN_CLASS == '' ]]; then
die $LINENO "Neutron plugin not set.. exiting"
fi
# If needed, move config file from ``$NEUTRON_DIR/etc/neutron`` to ``NEUTRON_CONF_DIR``
mkdir -p /$Q_PLUGIN_CONF_PATH
Q_PLUGIN_CONF_FILE=$Q_PLUGIN_CONF_PATH/$Q_PLUGIN_CONF_FILENAME
cp $NEUTRON_DIR/$Q_PLUGIN_CONF_FILE /$Q_PLUGIN_CONF_FILE
iniset /$Q_PLUGIN_CONF_FILE database connection `database_connection_url $Q_DB_NAME`
iniset $NEUTRON_CONF DEFAULT state_path $DATA_DIR/neutron
# If addition config files are set, make sure their path name is set as well
if [[ ${#Q_PLUGIN_EXTRA_CONF_FILES[@]} > 0 && $Q_PLUGIN_EXTRA_CONF_PATH == '' ]]; then
die $LINENO "Neutron additional plugin config not set.. exiting"
fi
# If additional config files exist, copy them over to neutron configuration
# directory
if [[ $Q_PLUGIN_EXTRA_CONF_PATH != '' ]]; then
mkdir -p /$Q_PLUGIN_EXTRA_CONF_PATH
local f
for (( f=0; $f < ${#Q_PLUGIN_EXTRA_CONF_FILES[@]}; f+=1 )); do
Q_PLUGIN_EXTRA_CONF_FILES[$f]=$Q_PLUGIN_EXTRA_CONF_PATH/${Q_PLUGIN_EXTRA_CONF_FILES[$f]}
cp $NEUTRON_DIR/${Q_PLUGIN_EXTRA_CONF_FILES[$f]} /${Q_PLUGIN_EXTRA_CONF_FILES[$f]}
done
fi
_neutron_setup_rootwrap
}
function _configure_neutron_debug_command() {
if [[ "$Q_USE_DEBUG_COMMAND" != "True" ]]; then
return
fi
cp $NEUTRON_DIR/etc/l3_agent.ini $NEUTRON_TEST_CONFIG_FILE
iniset $NEUTRON_TEST_CONFIG_FILE DEFAULT verbose False
iniset $NEUTRON_TEST_CONFIG_FILE DEFAULT debug False
iniset $NEUTRON_TEST_CONFIG_FILE DEFAULT use_namespaces $Q_USE_NAMESPACE
iniset $NEUTRON_TEST_CONFIG_FILE DEFAULT root_helper "$Q_RR_COMMAND"
# Intermediate fix until Neutron patch lands and then line above will
# be cleaned.
iniset $NEUTRON_TEST_CONFIG_FILE agent root_helper "$Q_RR_COMMAND"
_neutron_setup_keystone $NEUTRON_TEST_CONFIG_FILE DEFAULT set_auth_url
_neutron_setup_interface_driver $NEUTRON_TEST_CONFIG_FILE
neutron_plugin_configure_debug_command
}
function _configure_neutron_dhcp_agent() {
AGENT_DHCP_BINARY="$NEUTRON_BIN_DIR/neutron-dhcp-agent"
Q_DHCP_CONF_FILE=$NEUTRON_CONF_DIR/dhcp_agent.ini
cp $NEUTRON_DIR/etc/dhcp_agent.ini $Q_DHCP_CONF_FILE
iniset $Q_DHCP_CONF_FILE DEFAULT verbose True
iniset $Q_DHCP_CONF_FILE DEFAULT debug True
iniset $Q_DHCP_CONF_FILE DEFAULT use_namespaces $Q_USE_NAMESPACE
iniset $Q_DHCP_CONF_FILE DEFAULT root_helper "$Q_RR_COMMAND"
_neutron_setup_keystone $Q_DHCP_CONF_FILE DEFAULT set_auth_url
_neutron_setup_interface_driver $Q_DHCP_CONF_FILE
neutron_plugin_configure_dhcp_agent
}
function _configure_neutron_l3_agent() {
Q_L3_ENABLED=True
# for l3-agent, only use per tenant router if we have namespaces
Q_L3_ROUTER_PER_TENANT=$Q_USE_NAMESPACE
AGENT_L3_BINARY=${AGENT_L3_BINARY:-"$NEUTRON_BIN_DIR/neutron-l3-agent"}
Q_L3_CONF_FILE=$NEUTRON_CONF_DIR/l3_agent.ini
cp $NEUTRON_DIR/etc/l3_agent.ini $Q_L3_CONF_FILE
iniset $Q_L3_CONF_FILE DEFAULT verbose True
iniset $Q_L3_CONF_FILE DEFAULT debug True
iniset $Q_L3_CONF_FILE DEFAULT use_namespaces $Q_USE_NAMESPACE
iniset $Q_L3_CONF_FILE DEFAULT root_helper "$Q_RR_COMMAND"
_neutron_setup_keystone $Q_L3_CONF_FILE DEFAULT set_auth_url
_neutron_setup_interface_driver $Q_L3_CONF_FILE
neutron_plugin_configure_l3_agent
}
function _configure_neutron_metadata_agent() {
AGENT_META_BINARY="$NEUTRON_BIN_DIR/neutron-metadata-agent"
Q_META_CONF_FILE=$NEUTRON_CONF_DIR/metadata_agent.ini
cp $NEUTRON_DIR/etc/metadata_agent.ini $Q_META_CONF_FILE
iniset $Q_META_CONF_FILE DEFAULT verbose True
iniset $Q_META_CONF_FILE DEFAULT debug True
iniset $Q_META_CONF_FILE DEFAULT nova_metadata_ip $Q_META_DATA_IP
iniset $Q_META_CONF_FILE DEFAULT root_helper "$Q_RR_COMMAND"
_neutron_setup_keystone $Q_META_CONF_FILE DEFAULT set_auth_url
}
function _configure_neutron_lbaas() {
neutron_agent_lbaas_configure_common
neutron_agent_lbaas_configure_agent
}
function _configure_neutron_vpn()
{
neutron_vpn_install_agent_packages
neutron_vpn_configure_common
neutron_vpn_configure_agent
}
# _configure_neutron_plugin_agent() - Set config files for neutron plugin agent
# It is called when q-agt is enabled.
function _configure_neutron_plugin_agent() {
# Specify the default root helper prior to agent configuration to
# ensure that an agent's configuration can override the default
iniset /$Q_PLUGIN_CONF_FILE agent root_helper "$Q_RR_COMMAND"
iniset $NEUTRON_CONF DEFAULT verbose True
iniset $NEUTRON_CONF DEFAULT debug True
# Configure agent for plugin
neutron_plugin_configure_plugin_agent
}
# _configure_neutron_service() - Set config files for neutron service
# It is called when q-svc is enabled.
function _configure_neutron_service() {
Q_API_PASTE_FILE=$NEUTRON_CONF_DIR/api-paste.ini
Q_POLICY_FILE=$NEUTRON_CONF_DIR/policy.json
cp $NEUTRON_DIR/etc/api-paste.ini $Q_API_PASTE_FILE
cp $NEUTRON_DIR/etc/policy.json $Q_POLICY_FILE
if is_service_enabled $DATABASE_BACKENDS; then
recreate_database $Q_DB_NAME utf8
else
die $LINENO "A database must be enabled in order to use the $Q_PLUGIN Neutron plugin."
fi
# Update either configuration file with plugin
iniset $NEUTRON_CONF DEFAULT core_plugin $Q_PLUGIN_CLASS
if [[ $Q_SERVICE_PLUGIN_CLASSES != '' ]]; then
iniset $NEUTRON_CONF DEFAULT service_plugins $Q_SERVICE_PLUGIN_CLASSES
fi
iniset $NEUTRON_CONF DEFAULT verbose True
iniset $NEUTRON_CONF DEFAULT debug True
iniset $NEUTRON_CONF DEFAULT policy_file $Q_POLICY_FILE
iniset $NEUTRON_CONF DEFAULT allow_overlapping_ips $Q_ALLOW_OVERLAPPING_IP
iniset $NEUTRON_CONF DEFAULT auth_strategy $Q_AUTH_STRATEGY
_neutron_setup_keystone $NEUTRON_CONF keystone_authtoken
# Define extra "DEFAULT" configuration options when q-svc is configured by
# defining the array ``Q_SRV_EXTRA_DEFAULT_OPTS``.
# For Example: ``Q_SRV_EXTRA_DEFAULT_OPTS=(foo=true bar=2)``
for I in "${Q_SRV_EXTRA_DEFAULT_OPTS[@]}"; do
# Replace the first '=' with ' ' for iniset syntax
iniset $NEUTRON_CONF DEFAULT ${I/=/ }
done
# Configure plugin
neutron_plugin_configure_service
}
# Utility Functions
#------------------
# _neutron_setup_rootwrap() - configure Neutron's rootwrap
function _neutron_setup_rootwrap() {
if [[ "$Q_USE_ROOTWRAP" == "False" ]]; then
return
fi
# Deploy new rootwrap filters files (owned by root).
# Wipe any existing ``rootwrap.d`` files first
Q_CONF_ROOTWRAP_D=$NEUTRON_CONF_DIR/rootwrap.d
if [[ -d $Q_CONF_ROOTWRAP_D ]]; then
sudo rm -rf $Q_CONF_ROOTWRAP_D
fi
# Deploy filters to ``$NEUTRON_CONF_DIR/rootwrap.d``
mkdir -p -m 755 $Q_CONF_ROOTWRAP_D
cp -pr $NEUTRON_DIR/etc/neutron/rootwrap.d/* $Q_CONF_ROOTWRAP_D/
sudo chown -R root:root $Q_CONF_ROOTWRAP_D
sudo chmod 644 $Q_CONF_ROOTWRAP_D/*
# Set up ``rootwrap.conf``, pointing to ``$NEUTRON_CONF_DIR/rootwrap.d``
# location moved in newer versions, prefer new location
if test -r $NEUTRON_DIR/etc/neutron/rootwrap.conf; then
sudo cp -p $NEUTRON_DIR/etc/neutron/rootwrap.conf $Q_RR_CONF_FILE
else
sudo cp -p $NEUTRON_DIR/etc/rootwrap.conf $Q_RR_CONF_FILE
fi
sudo sed -e "s:^filters_path=.*$:filters_path=$Q_CONF_ROOTWRAP_D:" -i $Q_RR_CONF_FILE
sudo chown root:root $Q_RR_CONF_FILE
sudo chmod 0644 $Q_RR_CONF_FILE
# Specify ``rootwrap.conf`` as first parameter to neutron-rootwrap
ROOTWRAP_SUDOER_CMD="$NEUTRON_ROOTWRAP $Q_RR_CONF_FILE *"
# Set up the rootwrap sudoers for neutron
TEMPFILE=`mktemp`
echo "$USER ALL=(root) NOPASSWD: $ROOTWRAP_SUDOER_CMD" >$TEMPFILE
chmod 0440 $TEMPFILE
sudo chown root:root $TEMPFILE
sudo mv $TEMPFILE /etc/sudoers.d/neutron-rootwrap
# Update the root_helper
iniset $NEUTRON_CONF agent root_helper "$Q_RR_COMMAND"
}
# Configures keystone integration for neutron service and agents
function _neutron_setup_keystone() {
local conf_file=$1
local section=$2
local use_auth_url=$3
if [[ -n $use_auth_url ]]; then
iniset $conf_file $section auth_url "$KEYSTONE_SERVICE_PROTOCOL://$KEYSTONE_AUTH_HOST:$KEYSTONE_AUTH_PORT/v2.0"
else
iniset $conf_file $section auth_host $KEYSTONE_SERVICE_HOST
iniset $conf_file $section auth_port $KEYSTONE_AUTH_PORT
iniset $conf_file $section auth_protocol $KEYSTONE_SERVICE_PROTOCOL
fi
iniset $conf_file $section admin_tenant_name $SERVICE_TENANT_NAME
iniset $conf_file $section admin_user $Q_ADMIN_USERNAME
iniset $conf_file $section admin_password $SERVICE_PASSWORD
iniset $conf_file $section signing_dir $NEUTRON_AUTH_CACHE_DIR
# Create cache dir
sudo mkdir -p $NEUTRON_AUTH_CACHE_DIR
sudo chown $STACK_USER $NEUTRON_AUTH_CACHE_DIR
rm -f $NEUTRON_AUTH_CACHE_DIR/*
}
function _neutron_setup_interface_driver() {
# ovs_use_veth needs to be set before the plugin configuration
# occurs to allow plugins to override the setting.
iniset $1 DEFAULT ovs_use_veth $Q_OVS_USE_VETH
neutron_plugin_setup_interface_driver $1
}
# Functions for Neutron Exercises
#--------------------------------
function delete_probe() {
local from_net="$1"
net_id=`_get_net_id $from_net`
probe_id=`neutron-debug --os-tenant-name admin --os-username admin --os-password $ADMIN_PASSWORD probe-list -c id -c network_id | grep $net_id | awk '{print $2}'`
neutron-debug --os-tenant-name admin --os-username admin probe-delete $probe_id
}
function setup_neutron_debug() {
if [[ "$Q_USE_DEBUG_COMMAND" == "True" ]]; then
public_net_id=`_get_net_id $PUBLIC_NETWORK_NAME`
neutron-debug --os-tenant-name admin --os-username admin --os-password $ADMIN_PASSWORD probe-create --device-owner compute $public_net_id
private_net_id=`_get_net_id $PRIVATE_NETWORK_NAME`
neutron-debug --os-tenant-name admin --os-username admin --os-password $ADMIN_PASSWORD probe-create --device-owner compute $private_net_id
fi
}
function teardown_neutron_debug() {
delete_probe $PUBLIC_NETWORK_NAME
delete_probe $PRIVATE_NETWORK_NAME
}
function _get_net_id() {
neutron --os-tenant-name admin --os-username admin --os-password $ADMIN_PASSWORD net-list | grep $1 | awk '{print $2}'
}
function _get_probe_cmd_prefix() {
local from_net="$1"
net_id=`_get_net_id $from_net`
probe_id=`neutron-debug --os-tenant-name admin --os-username admin --os-password $ADMIN_PASSWORD probe-list -c id -c network_id | grep $net_id | awk '{print $2}' | head -n 1`
echo "$Q_RR_COMMAND ip netns exec qprobe-$probe_id"
}
function _ping_check_neutron() {
local from_net=$1
local ip=$2
local timeout_sec=$3
local expected=${4:-"True"}
local check_command=""
probe_cmd=`_get_probe_cmd_prefix $from_net`
if [[ "$expected" = "True" ]]; then
check_command="while ! $probe_cmd ping -w 1 -c 1 $ip; do sleep 1; done"
else
check_command="while $probe_cmd ping -w 1 -c 1 $ip; do sleep 1; done"
fi
if ! timeout $timeout_sec sh -c "$check_command"; then
if [[ "$expected" = "True" ]]; then
die $LINENO "[Fail] Couldn't ping server"
else
die $LINENO "[Fail] Could ping server"
fi
fi
}
# ssh check
function _ssh_check_neutron() {
local from_net=$1
local key_file=$2
local ip=$3
local user=$4
local timeout_sec=$5
local probe_cmd = ""
probe_cmd=`_get_probe_cmd_prefix $from_net`
if ! timeout $timeout_sec sh -c "while ! $probe_cmd ssh -o StrictHostKeyChecking=no -i $key_file ${user}@$ip echo success; do sleep 1; done"; then
die $LINENO "server didn't become ssh-able!"
fi
}
# Neutron 3rd party programs
#---------------------------
# please refer to ``lib/neutron_thirdparty/README.md`` for details
NEUTRON_THIRD_PARTIES=""
for f in $TOP_DIR/lib/neutron_thirdparty/*; do
third_party=$(basename $f)
if is_service_enabled $third_party; then
source $TOP_DIR/lib/neutron_thirdparty/$third_party
NEUTRON_THIRD_PARTIES="$NEUTRON_THIRD_PARTIES,$third_party"
fi
done
function _neutron_third_party_do() {
for third_party in ${NEUTRON_THIRD_PARTIES//,/ }; do
${1}_${third_party}
done
}
# configure_neutron_third_party() - Set config files, create data dirs, etc
function configure_neutron_third_party() {
_neutron_third_party_do configure
}
# init_neutron_third_party() - Initialize databases, etc.
function init_neutron_third_party() {
_neutron_third_party_do init
}
# install_neutron_third_party() - Collect source and prepare
function install_neutron_third_party() {
_neutron_third_party_do install
}
# start_neutron_third_party() - Start running processes, including screen
function start_neutron_third_party() {
_neutron_third_party_do start
}
# stop_neutron_third_party - Stop running processes (non-screen)
function stop_neutron_third_party() {
_neutron_third_party_do stop
}
# Restore xtrace
$XTRACE
# Local variables:
# mode: shell-script
# End:
View Git Blame Copy Permalink