openstack/devstack
Code Issues Proposed changes
bc7f643bb7
devstack/lib/cinder
Stephan Renatus e578effb33 Make use of STACK_USER instead of relying on USER 
Quite easily one ends up calling ./stack.sh in an environment that,
albeit being user "stack" (for example), doesn't quite meet the
expectations of devstack.  The errors that follow can be rather hard to
track down, as the dependency on `USER` is not mentioned.

To remedy this situation, this commit

- uses STACK_USER instead of USER and
- mentions that dependency in the script headers of lib/*

Change-Id: If4cdc39b922ea64b4c0893a0e695ec06349fccc5
2013-11-19 13:39:58 +01:00

561 lines
22 KiB
Plaintext
Raw Blame History

# lib/cinder
# Install and start **Cinder** volume service
# Dependencies:
#
# - functions
# - DEST, DATA_DIR, STACK_USER must be defined
# - SERVICE_{TENANT_NAME|PASSWORD} must be defined
# - ``KEYSTONE_TOKEN_FORMAT`` must be defined
# stack.sh
# ---------
# - install_cinder
# - configure_cinder
# - init_cinder
# - start_cinder
# - stop_cinder
# - cleanup_cinder
# Save trace setting
XTRACE=$(set +o | grep xtrace)
set +o xtrace
# Defaults
# --------
# set up default driver
CINDER_DRIVER=${CINDER_DRIVER:-default}
# set up default directories
CINDER_DIR=$DEST/cinder
CINDERCLIENT_DIR=$DEST/python-cinderclient
CINDER_STATE_PATH=${CINDER_STATE_PATH:=$DATA_DIR/cinder}
CINDER_AUTH_CACHE_DIR=${CINDER_AUTH_CACHE_DIR:-/var/cache/cinder}
CINDER_CONF_DIR=/etc/cinder
CINDER_CONF=$CINDER_CONF_DIR/cinder.conf
CINDER_API_PASTE_INI=$CINDER_CONF_DIR/api-paste.ini
# Public facing bits
CINDER_SERVICE_HOST=${CINDER_SERVICE_HOST:-$SERVICE_HOST}
CINDER_SERVICE_PORT=${CINDER_SERVICE_PORT:-8776}
CINDER_SERVICE_PORT_INT=${CINDER_SERVICE_PORT_INT:-18776}
CINDER_SERVICE_PROTOCOL=${CINDER_SERVICE_PROTOCOL:-$SERVICE_PROTOCOL}
# Support entry points installation of console scripts
if [[ -d $CINDER_DIR/bin ]]; then
CINDER_BIN_DIR=$CINDER_DIR/bin
else
CINDER_BIN_DIR=$(get_python_exec_prefix)
fi
# Support for multi lvm backend configuration (default is no support)
CINDER_MULTI_LVM_BACKEND=$(trueorfalse False $CINDER_MULTI_LVM_BACKEND)
# Should cinder perform secure deletion of volumes?
# Defaults to true, can be set to False to avoid this bug when testing:
# https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1023755
CINDER_SECURE_DELETE=`trueorfalse True $CINDER_SECURE_DELETE`
# Cinder reports allocations back to the scheduler on periodic intervals
# it turns out we can get an "out of space" issue when we run tests too
# quickly just because cinder didn't realize we'd freed up resources.
# Make this configurable so that devstack-gate/tempest can set it to
# less than the 60 second default
# https://bugs.launchpad.net/cinder/+bug/1180976
CINDER_PERIODIC_INTERVAL=${CINDER_PERIODIC_INTERVAL:-60}
# Name of the lvm volume groups to use/create for iscsi volumes
VOLUME_GROUP=${VOLUME_GROUP:-stack-volumes}
VOLUME_BACKING_FILE=${VOLUME_BACKING_FILE:-$DATA_DIR/${VOLUME_GROUP}-backing-file}
VOLUME_BACKING_DEVICE=${VOLUME_BACKING_DEVICE:-}
# VOLUME_GROUP2 is used only if CINDER_MULTI_LVM_BACKEND = True
VOLUME_GROUP2=${VOLUME_GROUP2:-stack-volumes2}
VOLUME_BACKING_FILE2=${VOLUME_BACKING_FILE2:-$DATA_DIR/${VOLUME_GROUP2}-backing-file}
VOLUME_BACKING_DEVICE2=${VOLUME_BACKING_DEVICE2:-}
VOLUME_NAME_PREFIX=${VOLUME_NAME_PREFIX:-volume-}
# Functions
# ---------
# _clean_lvm_lv removes all cinder LVM volumes
#
# Usage: _clean_lvm_lv $VOLUME_GROUP $VOLUME_NAME_PREFIX
function _clean_lvm_lv() {
local vg=$1
local lv_prefix=$2
# Clean out existing volumes
for lv in `sudo lvs --noheadings -o lv_name $vg`; do
# lv_prefix prefixes the LVs we want
if [[ "${lv#$lv_prefix}" != "$lv" ]]; then
sudo lvremove -f $vg/$lv
fi
done
}
# _clean_lvm_backing_file() removes the backing file of the
# volume group used by cinder
#
# Usage: _clean_lvm_backing_file() $VOLUME_GROUP
function _clean_lvm_backing_file() {
local vg=$1
# if there is no logical volume left, it's safe to attempt a cleanup
# of the backing file
if [ -z "`sudo lvs --noheadings -o lv_name $vg`" ]; then
# if the backing physical device is a loop device, it was probably setup by devstack
VG_DEV=$(sudo losetup -j $DATA_DIR/${vg}-backing-file | awk -F':' '/backing-file/ { print $1}')
if [[ -n "$VG_DEV" ]]; then
sudo losetup -d $VG_DEV
rm -f $DATA_DIR/${vg}-backing-file
fi
fi
}
# cleanup_cinder() - Remove residual data files, anything left over from previous
# runs that a clean run would need to clean up
function cleanup_cinder() {
# ensure the volume group is cleared up because fails might
# leave dead volumes in the group
TARGETS=$(sudo tgtadm --op show --mode target)
if [ $? -ne 0 ]; then
# If tgt driver isn't running this won't work obviously
# So check the response and restart if need be
echo "tgtd seems to be in a bad state, restarting..."
if is_ubuntu; then
restart_service tgt
else
restart_service tgtd
fi
TARGETS=$(sudo tgtadm --op show --mode target)
fi
if [[ -n "$TARGETS" ]]; then
iqn_list=( $(grep --no-filename -r iqn $SCSI_PERSIST_DIR | sed 's/<target //' | sed 's/>//') )
for i in "${iqn_list[@]}"; do
echo removing iSCSI target: $i
sudo tgt-admin --delete $i
done
fi
if is_service_enabled cinder; then
sudo rm -rf $CINDER_STATE_PATH/volumes/*
fi
if is_ubuntu; then
stop_service tgt
else
stop_service tgtd
fi
# Campsite rule: leave behind a volume group at least as clean as we found it
_clean_lvm_lv $VOLUME_GROUP $VOLUME_NAME_PREFIX
_clean_lvm_backing_file $VOLUME_GROUP
if [ "$CINDER_MULTI_LVM_BACKEND" = "True" ]; then
_clean_lvm_lv $VOLUME_GROUP2 $VOLUME_NAME_PREFIX
_clean_lvm_backing_file $VOLUME_GROUP2
fi
}
# configure_cinder() - Set config files, create data dirs, etc
function configure_cinder() {
if [[ ! -d $CINDER_CONF_DIR ]]; then
sudo mkdir -p $CINDER_CONF_DIR
fi
sudo chown $STACK_USER $CINDER_CONF_DIR
cp -p $CINDER_DIR/etc/cinder/policy.json $CINDER_CONF_DIR
# Set the paths of certain binaries
CINDER_ROOTWRAP=$(get_rootwrap_location cinder)
# If Cinder ships the new rootwrap filters files, deploy them
# (owned by root) and add a parameter to $CINDER_ROOTWRAP
ROOTWRAP_CINDER_SUDOER_CMD="$CINDER_ROOTWRAP"
if [[ -d $CINDER_DIR/etc/cinder/rootwrap.d ]]; then
# Wipe any existing rootwrap.d files first
if [[ -d $CINDER_CONF_DIR/rootwrap.d ]]; then
sudo rm -rf $CINDER_CONF_DIR/rootwrap.d
fi
# Deploy filters to /etc/cinder/rootwrap.d
sudo mkdir -m 755 $CINDER_CONF_DIR/rootwrap.d
sudo cp $CINDER_DIR/etc/cinder/rootwrap.d/*.filters $CINDER_CONF_DIR/rootwrap.d
sudo chown -R root:root $CINDER_CONF_DIR/rootwrap.d
sudo chmod 644 $CINDER_CONF_DIR/rootwrap.d/*
# Set up rootwrap.conf, pointing to /etc/cinder/rootwrap.d
sudo cp $CINDER_DIR/etc/cinder/rootwrap.conf $CINDER_CONF_DIR/
sudo sed -e "s:^filters_path=.*$:filters_path=$CINDER_CONF_DIR/rootwrap.d:" -i $CINDER_CONF_DIR/rootwrap.conf
sudo chown root:root $CINDER_CONF_DIR/rootwrap.conf
sudo chmod 0644 $CINDER_CONF_DIR/rootwrap.conf
# Specify rootwrap.conf as first parameter to cinder-rootwrap
CINDER_ROOTWRAP="$CINDER_ROOTWRAP $CINDER_CONF_DIR/rootwrap.conf"
ROOTWRAP_CINDER_SUDOER_CMD="$CINDER_ROOTWRAP *"
fi
TEMPFILE=`mktemp`
echo "$STACK_USER ALL=(root) NOPASSWD: $ROOTWRAP_CINDER_SUDOER_CMD" >$TEMPFILE
chmod 0440 $TEMPFILE
sudo chown root:root $TEMPFILE
sudo mv $TEMPFILE /etc/sudoers.d/cinder-rootwrap
cp $CINDER_DIR/etc/cinder/api-paste.ini $CINDER_API_PASTE_INI
inicomment $CINDER_API_PASTE_INI filter:authtoken auth_host
inicomment $CINDER_API_PASTE_INI filter:authtoken auth_port
inicomment $CINDER_API_PASTE_INI filter:authtoken auth_protocol
inicomment $CINDER_API_PASTE_INI filter:authtoken admin_tenant_name
inicomment $CINDER_API_PASTE_INI filter:authtoken admin_user
inicomment $CINDER_API_PASTE_INI filter:authtoken admin_password
inicomment $CINDER_API_PASTE_INI filter:authtoken signing_dir
cp $CINDER_DIR/etc/cinder/cinder.conf.sample $CINDER_CONF
iniset $CINDER_CONF keystone_authtoken auth_host $KEYSTONE_AUTH_HOST
iniset $CINDER_CONF keystone_authtoken auth_port $KEYSTONE_AUTH_PORT
iniset $CINDER_CONF keystone_authtoken auth_protocol $KEYSTONE_AUTH_PROTOCOL
iniset $CINDER_CONF keystone_authtoken admin_tenant_name $SERVICE_TENANT_NAME
iniset $CINDER_CONF keystone_authtoken admin_user cinder
iniset $CINDER_CONF keystone_authtoken admin_password $SERVICE_PASSWORD
iniset $CINDER_CONF keystone_authtoken signing_dir $CINDER_AUTH_CACHE_DIR
iniset $CINDER_CONF DEFAULT auth_strategy keystone
iniset $CINDER_CONF DEFAULT debug $ENABLE_DEBUG_LOG_LEVEL
iniset $CINDER_CONF DEFAULT verbose True
if [ "$CINDER_MULTI_LVM_BACKEND" = "True" ]; then
iniset $CINDER_CONF DEFAULT enabled_backends lvmdriver-1,lvmdriver-2
iniset $CINDER_CONF lvmdriver-1 volume_group $VOLUME_GROUP
iniset $CINDER_CONF lvmdriver-1 volume_driver cinder.volume.drivers.lvm.LVMISCSIDriver
iniset $CINDER_CONF lvmdriver-1 volume_backend_name LVM_iSCSI
iniset $CINDER_CONF lvmdriver-2 volume_group $VOLUME_GROUP2
iniset $CINDER_CONF lvmdriver-2 volume_driver cinder.volume.drivers.lvm.LVMISCSIDriver
iniset $CINDER_CONF lvmdriver-2 volume_backend_name LVM_iSCSI_2
else
iniset $CINDER_CONF DEFAULT volume_group $VOLUME_GROUP
iniset $CINDER_CONF DEFAULT volume_name_template ${VOLUME_NAME_PREFIX}%s
fi
iniset $CINDER_CONF DEFAULT my_ip "$CINDER_SERVICE_HOST"
iniset $CINDER_CONF DEFAULT iscsi_helper tgtadm
iniset $CINDER_CONF DEFAULT sql_connection `database_connection_url cinder`
iniset $CINDER_CONF DEFAULT api_paste_config $CINDER_API_PASTE_INI
iniset $CINDER_CONF DEFAULT rootwrap_config "$CINDER_CONF_DIR/rootwrap.conf"
iniset $CINDER_CONF DEFAULT osapi_volume_extension cinder.api.contrib.standard_extensions
iniset $CINDER_CONF DEFAULT state_path $CINDER_STATE_PATH
iniset $CINDER_CONF DEFAULT lock_path $CINDER_STATE_PATH
iniset $CINDER_CONF DEFAULT periodic_interval $CINDER_PERIODIC_INTERVAL
if is_service_enabled ceilometer; then
iniset $CINDER_CONF DEFAULT notification_driver "cinder.openstack.common.notifier.rpc_notifier"
fi
if is_service_enabled tls-proxy; then
# Set the service port for a proxy to take the original
iniset $CINDER_CONF DEFAULT osapi_volume_listen_port $CINDER_SERVICE_PORT_INT
fi
if [ "$SYSLOG" != "False" ]; then
iniset $CINDER_CONF DEFAULT use_syslog True
fi
iniset_rpc_backend cinder $CINDER_CONF DEFAULT
if [[ "$CINDER_SECURE_DELETE" == "False" ]]; then
iniset $CINDER_CONF DEFAULT secure_delete False
iniset $CINDER_CONF DEFAULT volume_clear none
fi
# Format logging
if [ "$LOG_COLOR" == "True" ] && [ "$SYSLOG" == "False" ]; then
setup_colorized_logging $CINDER_CONF DEFAULT "project_id" "user_id"
fi
if [ "$CINDER_DRIVER" == "XenAPINFS" ]; then
(
set -u
iniset $CINDER_CONF DEFAULT volume_driver "cinder.volume.drivers.xenapi.sm.XenAPINFSDriver"
iniset $CINDER_CONF DEFAULT xenapi_connection_url "$CINDER_XENAPI_CONNECTION_URL"
iniset $CINDER_CONF DEFAULT xenapi_connection_username "$CINDER_XENAPI_CONNECTION_USERNAME"
iniset $CINDER_CONF DEFAULT xenapi_connection_password "$CINDER_XENAPI_CONNECTION_PASSWORD"
iniset $CINDER_CONF DEFAULT xenapi_nfs_server "$CINDER_XENAPI_NFS_SERVER"
iniset $CINDER_CONF DEFAULT xenapi_nfs_serverpath "$CINDER_XENAPI_NFS_SERVERPATH"
)
elif [ "$CINDER_DRIVER" == "nfs" ]; then
iniset $CINDER_CONF DEFAULT volume_driver "cinder.volume.drivers.nfs.NfsDriver"
iniset $CINDER_CONF DEFAULT nfs_shares_config "$CINDER_CONF_DIR/nfs_shares.conf"
echo "$CINDER_NFS_SERVERPATH" | sudo tee "$CINDER_CONF_DIR/nfs_shares.conf"
sudo chmod 666 $CINDER_CONF_DIR/nfs_shares.conf
elif [ "$CINDER_DRIVER" == "sheepdog" ]; then
iniset $CINDER_CONF DEFAULT volume_driver "cinder.volume.drivers.sheepdog.SheepdogDriver"
elif [ "$CINDER_DRIVER" == "glusterfs" ]; then
# To use glusterfs, set the following in localrc:
# CINDER_DRIVER=glusterfs
# CINDER_GLUSTERFS_SHARES="127.0.0.1:/vol1;127.0.0.1:/vol2"
# Shares are <host>:<volume> and separated by semicolons.
iniset $CINDER_CONF DEFAULT volume_driver "cinder.volume.drivers.glusterfs.GlusterfsDriver"
iniset $CINDER_CONF DEFAULT glusterfs_shares_config "$CINDER_CONF_DIR/glusterfs_shares"
touch $CINDER_CONF_DIR/glusterfs_shares
if [ ! -z "$CINDER_GLUSTERFS_SHARES" ]; then
CINDER_GLUSTERFS_SHARES=$(echo $CINDER_GLUSTERFS_SHARES | tr ";" "\n")
echo "$CINDER_GLUSTERFS_SHARES" > $CINDER_CONF_DIR/glusterfs_shares
fi
elif [ "$CINDER_DRIVER" == "vsphere" ]; then
echo_summary "Using VMware vCenter driver"
iniset $CINDER_CONF DEFAULT vmware_host_ip "$VMWAREAPI_IP"
iniset $CINDER_CONF DEFAULT vmware_host_username "$VMWAREAPI_USER"
iniset $CINDER_CONF DEFAULT vmware_host_password "$VMWAREAPI_PASSWORD"
iniset $CINDER_CONF DEFAULT volume_driver "cinder.volume.drivers.vmware.vmdk.VMwareVcVmdkDriver"
fi
if [[ is_fedora && $DISTRO =~ (rhel6) ]]; then
# Cinder clones are slightly larger due to some extra
# metadata. RHEL6 will not allow auto-extending of LV's
# without this, leading to clones giving hard-to-track disk
# I/O errors.
# see https://bugzilla.redhat.com/show_bug.cgi?id=975052
sudo sed -i~ \
-e 's/snapshot_autoextend_threshold =.*/snapshot_autoextend_threshold = 80/' \
-e 's/snapshot_autoextend_percent =.*/snapshot_autoextend_percent = 20/' \
/etc/lvm/lvm.conf
fi
iniset $CINDER_CONF keystone_authtoken auth_uri $KEYSTONE_SERVICE_PROTOCOL://$KEYSTONE_SERVICE_HOST:$KEYSTONE_SERVICE_PORT
iniset $CINDER_CONF keystone_authtoken admin_user cinder
iniset $CINDER_CONF keystone_authtoken admin_tenant_name $SERVICE_TENANT_NAME
iniset $CINDER_CONF keystone_authtoken admin_password $SERVICE_PASSWORD
}
# create_cinder_accounts() - Set up common required cinder accounts
# Tenant User Roles
# ------------------------------------------------------------------
# service cinder admin # if enabled
# Migrated from keystone_data.sh
create_cinder_accounts() {
SERVICE_TENANT=$(keystone tenant-list | awk "/ $SERVICE_TENANT_NAME / { print \$2 }")
ADMIN_ROLE=$(keystone role-list | awk "/ admin / { print \$2 }")
# Cinder
if [[ "$ENABLED_SERVICES" =~ "c-api" ]]; then
CINDER_USER=$(keystone user-create \
--name=cinder \
--pass="$SERVICE_PASSWORD" \
--tenant_id $SERVICE_TENANT \
--email=cinder@example.com \
| grep " id " | get_field 2)
keystone user-role-add \
--tenant-id $SERVICE_TENANT \
--user-id $CINDER_USER \
--role-id $ADMIN_ROLE
if [[ "$KEYSTONE_CATALOG_BACKEND" = 'sql' ]]; then
CINDER_SERVICE=$(keystone service-create \
--name=cinder \
--type=volume \
--description="Cinder Volume Service" \
| grep " id " | get_field 2)
keystone endpoint-create \
--region RegionOne \
--service_id $CINDER_SERVICE \
--publicurl "$CINDER_SERVICE_PROTOCOL://$CINDER_SERVICE_HOST:$CINDER_SERVICE_PORT/v1/\$(tenant_id)s" \
--adminurl "$CINDER_SERVICE_PROTOCOL://$CINDER_SERVICE_HOST:$CINDER_SERVICE_PORT/v1/\$(tenant_id)s" \
--internalurl "$CINDER_SERVICE_PROTOCOL://$CINDER_SERVICE_HOST:$CINDER_SERVICE_PORT/v1/\$(tenant_id)s"
CINDER_V2_SERVICE=$(keystone service-create \
--name=cinder \
--type=volumev2 \
--description="Cinder Volume Service V2" \
| grep " id " | get_field 2)
keystone endpoint-create \
--region RegionOne \
--service_id $CINDER_V2_SERVICE \
--publicurl "$CINDER_SERVICE_PROTOCOL://$CINDER_SERVICE_HOST:$CINDER_SERVICE_PORT/v2/\$(tenant_id)s" \
--adminurl "$CINDER_SERVICE_PROTOCOL://$CINDER_SERVICE_HOST:$CINDER_SERVICE_PORT/v2/\$(tenant_id)s" \
--internalurl "$CINDER_SERVICE_PROTOCOL://$CINDER_SERVICE_HOST:$CINDER_SERVICE_PORT/v2/\$(tenant_id)s"
fi
fi
}
# create_cinder_cache_dir() - Part of the init_cinder() process
function create_cinder_cache_dir() {
# Create cache dir
sudo mkdir -p $CINDER_AUTH_CACHE_DIR
sudo chown $STACK_USER $CINDER_AUTH_CACHE_DIR
rm -f $CINDER_AUTH_CACHE_DIR/*
}
create_cinder_volume_group() {
# According to the ``CINDER_MULTI_LVM_BACKEND`` value, configure one or two default volumes
# group called ``stack-volumes`` (and ``stack-volumes2``) for the volume
# service if it (they) does (do) not yet exist. If you don't wish to use a
# file backed volume group, create your own volume group called ``stack-volumes``
# and ``stack-volumes2`` before invoking ``stack.sh``.
#
# The two backing files are ``VOLUME_BACKING_FILE_SIZE`` in size, and they are stored in
# the ``DATA_DIR``.
if ! sudo vgs $VOLUME_GROUP; then
if [ -z "$VOLUME_BACKING_DEVICE" ]; then
# Only create if the file doesn't already exists
[[ -f $VOLUME_BACKING_FILE ]] || truncate -s $VOLUME_BACKING_FILE_SIZE $VOLUME_BACKING_FILE
DEV=`sudo losetup -f --show $VOLUME_BACKING_FILE`
# Only create if the loopback device doesn't contain $VOLUME_GROUP
if ! sudo vgs $VOLUME_GROUP; then
sudo vgcreate $VOLUME_GROUP $DEV
fi
else
sudo vgcreate $VOLUME_GROUP $VOLUME_BACKING_DEVICE
fi
fi
if [ "$CINDER_MULTI_LVM_BACKEND" = "True" ]; then
#set up the second volume if CINDER_MULTI_LVM_BACKEND is enabled
if ! sudo vgs $VOLUME_GROUP2; then
if [ -z "$VOLUME_BACKING_DEVICE2" ]; then
# Only create if the file doesn't already exists
[[ -f $VOLUME_BACKING_FILE2 ]] || truncate -s $VOLUME_BACKING_FILE_SIZE $VOLUME_BACKING_FILE2
DEV=`sudo losetup -f --show $VOLUME_BACKING_FILE2`
# Only create if the loopback device doesn't contain $VOLUME_GROUP
if ! sudo vgs $VOLUME_GROUP2; then
sudo vgcreate $VOLUME_GROUP2 $DEV
fi
else
sudo vgcreate $VOLUME_GROUP2 $VOLUME_BACKING_DEVICE2
fi
fi
fi
mkdir -p $CINDER_STATE_PATH/volumes
}
# init_cinder() - Initialize database and volume group
function init_cinder() {
# Force nova volumes off
NOVA_ENABLED_APIS=$(echo $NOVA_ENABLED_APIS | sed "s/osapi_volume,//")
if is_service_enabled $DATABASE_BACKENDS; then
# (Re)create cinder database
recreate_database cinder utf8
# Migrate cinder database
$CINDER_BIN_DIR/cinder-manage db sync
fi
if is_service_enabled c-vol; then
create_cinder_volume_group
if sudo vgs $VOLUME_GROUP; then
if is_fedora || is_suse; then
# service is not started by default
start_service tgtd
fi
# Remove iscsi targets
sudo tgtadm --op show --mode target | grep $VOLUME_NAME_PREFIX | grep Target | cut -f3 -d ' ' | sudo xargs -n1 tgt-admin --delete || true
# Start with a clean volume group
_clean_lvm_lv $VOLUME_GROUP $VOLUME_NAME_PREFIX
if [ "$CINDER_MULTI_LVM_BACKEND" = "True" ]; then
_clean_lvm_lv $VOLUME_GROUP2 $VOLUME_NAME_PREFIX
fi
fi
fi
create_cinder_cache_dir
}
# install_cinder() - Collect source and prepare
function install_cinder() {
git_clone $CINDER_REPO $CINDER_DIR $CINDER_BRANCH
setup_develop $CINDER_DIR
}
# install_cinderclient() - Collect source and prepare
function install_cinderclient() {
git_clone $CINDERCLIENT_REPO $CINDERCLIENT_DIR $CINDERCLIENT_BRANCH
setup_develop $CINDERCLIENT_DIR
sudo install -D -m 0644 -o $STACK_USER {$CINDERCLIENT_DIR/tools/,/etc/bash_completion.d/}cinder.bash_completion
}
# apply config.d approach for cinder volumes directory
function _configure_tgt_for_config_d() {
if [[ ! -d /etc/tgt/stack.d/ ]]; then
sudo ln -sf $CINDER_STATE_PATH/volumes /etc/tgt/stack.d
echo "include /etc/tgt/stack.d/*" | sudo tee -a /etc/tgt/targets.conf
fi
}
# start_cinder() - Start running processes, including screen
function start_cinder() {
if is_service_enabled c-vol; then
# Delete any old stack.conf
sudo rm -f /etc/tgt/conf.d/stack.conf
_configure_tgt_for_config_d
if is_ubuntu; then
# tgt in oneiric doesn't restart properly if tgtd isn't running
# do it in two steps
sudo stop tgt || true
sudo start tgt
elif is_fedora; then
# bypass redirection to systemctl during restart
sudo /sbin/service --skip-redirect tgtd restart
elif is_suse; then
restart_service tgtd
else
# note for other distros: unstack.sh also uses the tgt/tgtd service
# name, and would need to be adjusted too
exit_distro_not_supported "restarting tgt"
fi
# NOTE(gfidente): ensure tgtd is running in debug mode
sudo tgtadm --mode system --op update --name debug --value on
fi
screen_it c-api "cd $CINDER_DIR && $CINDER_BIN_DIR/cinder-api --config-file $CINDER_CONF"
screen_it c-sch "cd $CINDER_DIR && $CINDER_BIN_DIR/cinder-scheduler --config-file $CINDER_CONF"
screen_it c-bak "cd $CINDER_DIR && $CINDER_BIN_DIR/cinder-backup --config-file $CINDER_CONF"
screen_it c-vol "cd $CINDER_DIR && $CINDER_BIN_DIR/cinder-volume --config-file $CINDER_CONF"
# NOTE(jdg): For cinder, startup order matters. To ensure that repor_capabilities is received
# by the scheduler start the cinder-volume service last (or restart it) after the scheduler
# has started. This is a quick fix for lp bug/1189595
# Start proxies if enabled
if is_service_enabled c-api && is_service_enabled tls-proxy; then
start_tls_proxy '*' $CINDER_SERVICE_PORT $CINDER_SERVICE_HOST $CINDER_SERVICE_PORT_INT &
fi
}
# stop_cinder() - Stop running processes
function stop_cinder() {
# Kill the cinder screen windows
for serv in c-api c-bak c-sch c-vol; do
screen -S $SCREEN_NAME -p $serv -X kill
done
if is_service_enabled c-vol; then
if is_ubuntu; then
stop_service tgt
else
stop_service tgtd
fi
fi
}
# Restore xtrace
$XTRACE
# Tell emacs to use shell-script-mode
## Local variables:
## mode: shell-script
## End:
View Git Blame Copy Permalink