openstack/devstack
Code Issues Proposed changes
ceb63203b2
devstack/lib/tempest
Matthew Treinish 0948ab90ae
Move auth setup earlier in tempest config 
This commit moves the auth setup for tempest config to occur before
we run tempest verify-config. The API requests that command runs
require auth and in the case we run tempest without admin creds set
the config file will not have any credentials to run the query with.
By moving the auth setup to occur before this it will ensure tempest
is always configured with credentials before we run the command.

Change-Id: I6d11b24e4492f1fde3aa3a7a239c40d63111bfa1
2016-03-25 19:39:43 -04:00

614 lines
26 KiB
Bash
Raw Blame History

#!/bin/bash
#
# lib/tempest
# Install and configure Tempest
# Dependencies:
#
# - ``functions`` file
# - ``lib/nova`` service is running
# - Global vars that are assumed to be defined:
# - ``DEST``, ``FILES``
# - ``ADMIN_PASSWORD``
# - ``DEFAULT_IMAGE_NAME``
# - ``S3_SERVICE_PORT``
# - ``SERVICE_HOST``
# - ``BASE_SQL_CONN`` ``lib/database`` declares
# - ``PUBLIC_NETWORK_NAME``
# - ``Q_ROUTER_NAME``
# - ``Q_L3_ENABLED``
# - ``VIRT_DRIVER``
# - ``LIBVIRT_TYPE``
# - ``KEYSTONE_SERVICE_PROTOCOL``, ``KEYSTONE_SERVICE_HOST`` from lib/keystone
#
# Optional Dependencies:
#
# - ``ALT_*``
# - ``LIVE_MIGRATION_AVAILABLE``
# - ``USE_BLOCK_MIGRATION_FOR_LIVE_MIGRATION``
# - ``DEFAULT_INSTANCE_TYPE``
# - ``DEFAULT_INSTANCE_USER``
# - ``CINDER_ENABLED_BACKENDS``
# - ``NOVA_ALLOW_DUPLICATE_NETWORKS``
#
# ``stack.sh`` calls the entry points in this order:
#
# - install_tempest
# - configure_tempest
# Save trace setting
_XTRACE_TEMPEST=$(set +o | grep xtrace)
set +o xtrace
# Defaults
# --------
# Set up default directories
GITDIR["tempest-lib"]=$DEST/tempest-lib
TEMPEST_DIR=$DEST/tempest
TEMPEST_CONFIG_DIR=${TEMPEST_CONFIG_DIR:-$TEMPEST_DIR/etc}
TEMPEST_CONFIG=$TEMPEST_CONFIG_DIR/tempest.conf
TEMPEST_STATE_PATH=${TEMPEST_STATE_PATH:=$DATA_DIR/tempest}
NOVA_SOURCE_DIR=$DEST/nova
BUILD_INTERVAL=1
# This is the timeout that tempest will wait for a VM to change state,
# spawn, delete, etc.
# The default is set to 196 seconds.
BUILD_TIMEOUT=${BUILD_TIMEOUT:-196}
# This must be False on stable branches, as master tempest
# deps do not match stable branch deps. Set this to True to
# have tempest installed in DevStack by default.
INSTALL_TEMPEST=${INSTALL_TEMPEST:-"True"}
# Cinder/Volume variables
TEMPEST_VOLUME_DRIVER=${TEMPEST_VOLUME_DRIVER:-default}
TEMPEST_DEFAULT_VOLUME_VENDOR="Open Source"
TEMPEST_VOLUME_VENDOR=${TEMPEST_VOLUME_VENDOR:-$TEMPEST_DEFAULT_VOLUME_VENDOR}
TEMPEST_DEFAULT_STORAGE_PROTOCOL="iSCSI"
TEMPEST_STORAGE_PROTOCOL=${TEMPEST_STORAGE_PROTOCOL:-$TEMPEST_DEFAULT_STORAGE_PROTOCOL}
# Neutron/Network variables
IPV6_ENABLED=$(trueorfalse True IPV6_ENABLED)
IPV6_SUBNET_ATTRIBUTES_ENABLED=$(trueorfalse True IPV6_SUBNET_ATTRIBUTES_ENABLED)
# Do we want to make a configuration where Tempest has admin on
# the cloud. We don't always want to so that we can ensure Tempest
# would work on a public cloud.
TEMPEST_HAS_ADMIN=$(trueorfalse True TEMPEST_HAS_ADMIN)
# Credential provider configuration option variables
TEMPEST_ALLOW_TENANT_ISOLATION=${TEMPEST_ALLOW_TENANT_ISOLATION:-$TEMPEST_HAS_ADMIN}
TEMPEST_USE_TEST_ACCOUNTS=$(trueorfalse False TEMPEST_USE_TEST_ACCOUNTS)
# The number of workers tempest is expected to be run with. This is used for
# generating a accounts.yaml for running with test-accounts. This is also the
# same variable that devstack-gate uses to specify the number of workers that
# it will run tempest with
TEMPEST_CONCURRENCY=${TEMPEST_CONCURRENCY:-$(nproc)}
# Functions
# ---------
# remove_disabled_extension - removes disabled extensions from the list of extensions
# to test for a given service
function remove_disabled_extensions {
local extensions_list=$1
shift
local disabled_exts=$*
remove_disabled_services "$extensions_list" "$disabled_exts"
}
# configure_tempest() - Set config files, create data dirs, etc
function configure_tempest {
if [[ "$INSTALL_TEMPEST" == "True" ]]; then
setup_develop $TEMPEST_DIR
else
# install testr since its used to process tempest logs
pip_install_gr testrepository
fi
local image_lines
local images
local num_images
local image_uuid
local image_uuid_alt
local password
local line
local flavors
local available_flavors
local flavors_ref
local flavor_lines
local public_network_id
local public_router_id
local ssh_connect_method="floating"
# Save IFS
ifs=$IFS
# Glance should already contain images to be used in tempest
# testing. Here we simply look for images stored in Glance
# and set the appropriate variables for use in the tempest config
# We ignore ramdisk and kernel images, look for the default image
# ``DEFAULT_IMAGE_NAME``. If not found, we set the ``image_uuid`` to the
# first image returned and set ``image_uuid_alt`` to the second,
# if there is more than one returned...
# ... Also ensure we only take active images, so we don't get snapshots in process
declare -a images
if is_service_enabled glance; then
while read -r IMAGE_NAME IMAGE_UUID; do
if [ "$IMAGE_NAME" = "$DEFAULT_IMAGE_NAME" ]; then
image_uuid="$IMAGE_UUID"
image_uuid_alt="$IMAGE_UUID"
fi
images+=($IMAGE_UUID)
done < <(openstack image list --property status=active | awk -F'|' '!/^(+--)|ID|aki|ari/ { print $3,$2 }')
case "${#images[*]}" in
0)
echo "Found no valid images to use!"
exit 1
;;
1)
if [ -z "$image_uuid" ]; then
image_uuid=${images[0]}
image_uuid_alt=${images[0]}
fi
;;
*)
if [ -z "$image_uuid" ]; then
image_uuid=${images[0]}
image_uuid_alt=${images[1]}
fi
;;
esac
fi
# (Re)create ``tempest.conf``
# Create every time because the image UUIDS are going to change
sudo install -d -o $STACK_USER $TEMPEST_CONFIG_DIR
rm -f $TEMPEST_CONFIG
local password=${ADMIN_PASSWORD:-secret}
# See ``lib/keystone`` where these users and tenants are set up
local admin_username=${ADMIN_USERNAME:-admin}
local admin_tenant_name=${ADMIN_TENANT_NAME:-admin}
local admin_domain_name=${ADMIN_DOMAIN_NAME:-Default}
local tempest_username=${TEMPEST_USERNAME:-demo}
local tempest_tenant_name=${TEMPEST_TENANT_NAME:-demo}
local alt_username=${ALT_USERNAME:-alt_demo}
local alt_tenant_name=${ALT_TENANT_NAME:-alt_demo}
local admin_tenant_id
admin_tenant_id=$(openstack project list | awk "/ admin / { print \$2 }")
if is_service_enabled nova; then
# If ``DEFAULT_INSTANCE_TYPE`` is not declared, use the new behavior
# Tempest creates its own instance types
available_flavors=$(nova flavor-list)
if [[ -z "$DEFAULT_INSTANCE_TYPE" ]]; then
if [[ ! ( $available_flavors =~ 'm1.nano' ) ]]; then
nova flavor-create m1.nano 42 64 0 1
fi
flavor_ref=42
if [[ ! ( $available_flavors =~ 'm1.micro' ) ]]; then
nova flavor-create m1.micro 84 128 0 1
fi
flavor_ref_alt=84
else
# Check Nova for existing flavors, if ``DEFAULT_INSTANCE_TYPE`` is set use it.
IFS=$'\r\n'
flavors=""
for line in $available_flavors; do
f=$(echo $line | awk "/ $DEFAULT_INSTANCE_TYPE / { print \$2 }")
flavors="$flavors $f"
done
for line in $available_flavors; do
flavors="$flavors `echo $line | grep -v "^\(|\s*ID\|+--\)" | cut -d' ' -f2`"
done
IFS=" "
flavors=($flavors)
num_flavors=${#flavors[*]}
echo "Found $num_flavors flavors"
if [[ $num_flavors -eq 0 ]]; then
echo "Found no valid flavors to use!"
exit 1
fi
flavor_ref=${flavors[0]}
flavor_ref_alt=$flavor_ref
# Ensure ``flavor_ref`` and ``flavor_ref_alt`` have different values.
# Some resize instance in tempest tests depends on this.
for f in ${flavors[@]:1}; do
if [[ $f -ne $flavor_ref ]]; then
flavor_ref_alt=$f
break
fi
done
fi
fi
ssh_connect_method=${TEMPEST_SSH_CONNECT_METHOD:-$ssh_connect_method}
if [ "$Q_L3_ENABLED" = "True" ]; then
public_network_id=$(neutron net-list | grep $PUBLIC_NETWORK_NAME | \
awk '{print $2}')
fi
iniset $TEMPEST_CONFIG DEFAULT use_syslog $SYSLOG
# Oslo
iniset $TEMPEST_CONFIG oslo_concurrency lock_path $TEMPEST_STATE_PATH
mkdir -p $TEMPEST_STATE_PATH
iniset $TEMPEST_CONFIG DEFAULT use_stderr False
iniset $TEMPEST_CONFIG DEFAULT log_file tempest.log
iniset $TEMPEST_CONFIG DEFAULT debug True
# Timeouts
iniset $TEMPEST_CONFIG compute build_timeout $BUILD_TIMEOUT
iniset $TEMPEST_CONFIG volume build_timeout $BUILD_TIMEOUT
# Identity
iniset $TEMPEST_CONFIG identity uri "$KEYSTONE_SERVICE_PROTOCOL://$KEYSTONE_SERVICE_HOST:5000/v2.0/"
iniset $TEMPEST_CONFIG identity uri_v3 "$KEYSTONE_SERVICE_URI_V3"
if [[ "$TEMPEST_HAS_ADMIN" == "True" ]]; then
iniset $TEMPEST_CONFIG auth admin_username $admin_username
iniset $TEMPEST_CONFIG auth admin_password "$password"
iniset $TEMPEST_CONFIG auth admin_tenant_name $admin_tenant_name
iniset $TEMPEST_CONFIG auth admin_tenant_id $admin_tenant_id
iniset $TEMPEST_CONFIG auth admin_domain_name $admin_domain_name
fi
if [ "$ENABLE_IDENTITY_V2" == "False" ]; then
# Only Identity v3 is available; then skip Identity API v2 tests
iniset $TEMPEST_CONFIG identity-feature-enabled api_v2 False
# In addition, use v3 auth tokens for running all Tempest tests
iniset $TEMPEST_CONFIG identity auth_version v3
else
iniset $TEMPEST_CONFIG identity auth_version ${TEMPEST_AUTH_VERSION:-v2}
fi
if is_ssl_enabled_service "key" || is_service_enabled tls-proxy; then
iniset $TEMPEST_CONFIG identity ca_certificates_file $SSL_BUNDLE_FILE
fi
# Image
# We want to be able to override this variable in the gate to avoid
# doing an external HTTP fetch for this test.
if [[ ! -z "$TEMPEST_HTTP_IMAGE" ]]; then
iniset $TEMPEST_CONFIG image http_image $TEMPEST_HTTP_IMAGE
fi
if [ "$VIRT_DRIVER" = "xenserver" ]; then
iniset $TEMPEST_CONFIG image disk_formats "ami,ari,aki,vhd,raw,iso"
fi
# Image Features
iniset $TEMPEST_CONFIG image-feature-enabled deactivate_image True
# Compute
iniset $TEMPEST_CONFIG compute ssh_user ${DEFAULT_INSTANCE_USER:-cirros} # DEPRECATED
iniset $TEMPEST_CONFIG compute image_ref $image_uuid
iniset $TEMPEST_CONFIG compute image_ref_alt $image_uuid_alt
iniset $TEMPEST_CONFIG compute image_alt_ssh_user ${ALT_INSTANCE_USER:-cirros}
iniset $TEMPEST_CONFIG compute flavor_ref $flavor_ref
iniset $TEMPEST_CONFIG compute flavor_ref_alt $flavor_ref_alt
iniset $TEMPEST_CONFIG compute ssh_connect_method $ssh_connect_method
# set the equiv validation option here as well to ensure they are
# in sync. They shouldn't be separate options.
iniset $TEMPEST_CONFIG validation connect_method $ssh_connect_method
if [[ ! $(is_service_enabled n-cell) && ! $(is_service_enabled neutron) ]]; then
iniset $TEMPEST_CONFIG compute fixed_network_name $PRIVATE_NETWORK_NAME
fi
# Set the service catalog entry for Tempest to run on. Typically
# used to try different compute API version targets. The tempest
# default if 'compute', which is typically valid, so only set this
# if you want to change it.
if [[ -n "$TEMPEST_COMPUTE_TYPE" ]]; then
iniset $TEMPEST_CONFIG compute catalog_type $TEMPEST_COMPUTE_TYPE
fi
# Compute Features
# Run ``verify_tempest_config -ur`` to retrieve enabled extensions on API endpoints
# NOTE(mtreinish): This must be done after auth settings are added to the tempest config
local tmp_cfg_file
tmp_cfg_file=$(mktemp)
cd $TEMPEST_DIR
if [[ "$OFFLINE" != "True" ]]; then
tox -revenv --notest
fi
# Auth
iniset $TEMPEST_CONFIG auth tempest_roles "Member"
if [[ $TEMPEST_USE_TEST_ACCOUNTS == "True" ]]; then
if [[ $TEMPEST_HAS_ADMIN == "True" ]]; then
tempest-account-generator -c $TEMPEST_CONFIG --os-username $admin_username --os-password "$password" --os-tenant-name $admin_tenant_name -r $TEMPEST_CONCURRENCY --with-admin etc/accounts.yaml
else
tempest-account-generator -c $TEMPEST_CONFIG --os-username $admin_username --os-password "$password" --os-tenant-name $admin_tenant_name -r $TEMPEST_CONCURRENCY etc/accounts.yaml
fi
iniset $TEMPEST_CONFIG auth use_dynamic_credentials False
iniset $TEMPEST_CONFIG auth test_accounts_file "etc/accounts.yaml"
elif [[ $TEMPEST_HAS_ADMIN == "False" ]]; then
iniset $TEMPEST_CONFIG auth use_dynamic_credentials ${TEMPEST_ALLOW_TENANT_ISOLATION:-False}
else
iniset $TEMPEST_CONFIG auth use_dynamic_credentials ${TEMPEST_ALLOW_TENANT_ISOLATION:-True}
fi
# NOTE(mtreinish): Respect constraints on tempest verify-config venv
tox -evenv -- pip install -c $REQUIREMENTS_DIR/upper-constraints.txt -r requirements.txt
tox -evenv -- tempest verify-config -uro $tmp_cfg_file
local compute_api_extensions=${COMPUTE_API_EXTENSIONS:-"all"}
if [[ ! -z "$DISABLE_COMPUTE_API_EXTENSIONS" ]]; then
# Enabled extensions are either the ones explicitly specified or those available on the API endpoint
compute_api_extensions=${COMPUTE_API_EXTENSIONS:-$(iniget $tmp_cfg_file compute-feature-enabled api_extensions | tr -d " ")}
# Remove disabled extensions
compute_api_extensions=$(remove_disabled_extensions $compute_api_extensions $DISABLE_COMPUTE_API_EXTENSIONS)
fi
# Set the microversion range for compute tests.
# This is used to run the Nova microversions tests.
# Setting [None, latest] range of microversion which allow Tempest to run all microversions tests.
# NOTE- To avoid microversion tests failure on stable branch, we need to change "tempest_compute_max_microversion"
# for stable branch on each release which should be changed from "latest" to max supported version of that release.
local tempest_compute_min_microversion=${TEMPEST_COMPUTE_MIN_MICROVERSION:-None}
local tempest_compute_max_microversion=${TEMPEST_COMPUTE_MAX_MICROVERSION:-"latest"}
# Reset microversions to None where v2.0 is running which does not support microversion.
# Both "None" means no microversion testing.
if [[ "$TEMPEST_COMPUTE_TYPE" == "compute_legacy" ]]; then
tempest_compute_min_microversion=None
tempest_compute_max_microversion=None
fi
if [ "$tempest_compute_min_microversion" == "None" ]; then
inicomment $TEMPEST_CONFIG compute-feature-enabled min_microversion
else
iniset $TEMPEST_CONFIG compute-feature-enabled min_microversion $tempest_compute_min_microversion
fi
if [ "$tempest_compute_max_microversion" == "None" ]; then
inicomment $TEMPEST_CONFIG compute-feature-enabled max_microversion
else
iniset $TEMPEST_CONFIG compute-feature-enabled max_microversion $tempest_compute_max_microversion
fi
iniset $TEMPEST_CONFIG compute-feature-enabled resize True
iniset $TEMPEST_CONFIG compute-feature-enabled live_migration ${LIVE_MIGRATION_AVAILABLE:-False}
iniset $TEMPEST_CONFIG compute-feature-enabled change_password False
iniset $TEMPEST_CONFIG compute-feature-enabled block_migration_for_live_migration ${USE_BLOCK_MIGRATION_FOR_LIVE_MIGRATION:-False}
iniset $TEMPEST_CONFIG compute-feature-enabled api_extensions $compute_api_extensions
# TODO(mriedem): Remove the preserve_ports flag when Juno is end of life.
iniset $TEMPEST_CONFIG compute-feature-enabled preserve_ports True
# TODO(gilliard): Remove the live_migrate_paused_instances flag when Juno is end of life.
iniset $TEMPEST_CONFIG compute-feature-enabled live_migrate_paused_instances True
iniset $TEMPEST_CONFIG compute-feature-enabled attach_encrypted_volume ${ATTACH_ENCRYPTED_VOLUME_AVAILABLE:-True}
# TODO(mriedem): Remove this when kilo-eol happens since the
# neutron.allow_duplicate_networks option was removed from nova in Liberty
# and is now the default behavior.
iniset $TEMPEST_CONFIG compute-feature-enabled allow_duplicate_networks ${NOVA_ALLOW_DUPLICATE_NETWORKS:-True}
if is_service_enabled n-cell; then
# Cells doesn't support shelving/unshelving
iniset $TEMPEST_CONFIG compute-feature-enabled shelve False
# Cells doesn't support hot-plugging virtual interfaces.
iniset $TEMPEST_CONFIG compute-feature-enabled interface_attach False
if [[ -z "$DEFAULT_INSTANCE_TYPE" ]]; then
# Cells supports resize but does not currently work with devstack
# because of the custom flavors created for Tempest runs which are
# not in the cells database.
# TODO(mriedem): work on adding a nova-manage command to sync
# flavors into the cells database.
iniset $TEMPEST_CONFIG compute-feature-enabled resize False
fi
fi
# Network
iniset $TEMPEST_CONFIG network api_version 2.0
iniset $TEMPEST_CONFIG network tenant_networks_reachable false
iniset $TEMPEST_CONFIG network public_network_id "$public_network_id"
iniset $TEMPEST_CONFIG network public_router_id "$public_router_id"
iniset $TEMPEST_CONFIG network default_network "$FIXED_RANGE"
iniset $TEMPEST_CONFIG network-feature-enabled ipv6 "$IPV6_ENABLED"
iniset $TEMPEST_CONFIG network-feature-enabled ipv6_subnet_attributes "$IPV6_SUBNET_ATTRIBUTES_ENABLED"
local network_api_extensions=${NETWORK_API_EXTENSIONS:-"all"}
if [[ ! -z "$DISABLE_NETWORK_API_EXTENSIONS" ]]; then
# Enabled extensions are either the ones explicitly specified or those available on the API endpoint
network_api_extensions=${NETWORK_API_EXTENSIONS:-$(iniget $tmp_cfg_file network-feature-enabled api_extensions | tr -d " ")}
# Remove disabled extensions
network_api_extensions=$(remove_disabled_extensions $network_api_extensions $DISABLE_NETWORK_API_EXTENSIONS)
fi
iniset $TEMPEST_CONFIG network-feature-enabled api_extensions $network_api_extensions
# Orchestration Tests
if is_service_enabled heat; then
if [[ ! -z "$HEAT_CFN_IMAGE_URL" ]]; then
iniset $TEMPEST_CONFIG orchestration image_ref $(basename "${HEAT_CFN_IMAGE_URL%.*}")
fi
# Nova might not be enabled, especially when we want to test tempest scenario/API that only create Neutron resources
if is_service_enabled nova; then
# build a specialized heat flavor
available_flavors=$(nova flavor-list)
if [[ ! ( $available_flavors =~ 'm1.heat' ) ]]; then
nova flavor-create m1.heat 451 512 0 1
fi
iniset $TEMPEST_CONFIG orchestration instance_type "m1.heat"
fi
iniset $TEMPEST_CONFIG orchestration build_timeout 900
iniset $TEMPEST_CONFIG orchestration stack_owner_role "_member_"
fi
# Scenario
SCENARIO_IMAGE_DIR=${SCENARIO_IMAGE_DIR:-$FILES/images/cirros-${CIRROS_VERSION}-${CIRROS_ARCH}-uec}
iniset $TEMPEST_CONFIG scenario img_dir $SCENARIO_IMAGE_DIR
iniset $TEMPEST_CONFIG scenario ami_img_file "cirros-${CIRROS_VERSION}-${CIRROS_ARCH}-blank.img"
iniset $TEMPEST_CONFIG scenario ari_img_file "cirros-${CIRROS_VERSION}-${CIRROS_ARCH}-initrd"
iniset $TEMPEST_CONFIG scenario aki_img_file "cirros-${CIRROS_VERSION}-${CIRROS_ARCH}-vmlinuz"
iniset $TEMPEST_CONFIG scenario img_file "cirros-${CIRROS_VERSION}-${CIRROS_ARCH}-disk.img"
# Large Ops Number
iniset $TEMPEST_CONFIG scenario large_ops_number ${TEMPEST_LARGE_OPS_NUMBER:-0}
# Telemetry
iniset $TEMPEST_CONFIG telemetry-feature-enabled events "True"
# Object Store
local object_storage_api_extensions=${OBJECT_STORAGE_API_EXTENSIONS:-"all"}
if [[ ! -z "$DISABLE_OBJECT_STORAGE_API_EXTENSIONS" ]]; then
# Enabled extensions are either the ones explicitly specified or those available on the API endpoint
object_storage_api_extensions=${OBJECT_STORAGE_API_EXTENSIONS:-$(iniget $tmp_cfg_file object-storage-feature-enabled discoverable_apis | tr -d " ")}
# Remove disabled extensions
object_storage_api_extensions=$(remove_disabled_extensions $object_storage_api_extensions $DISABLE_STORAGE_API_EXTENSIONS)
fi
iniset $TEMPEST_CONFIG object-storage-feature-enabled discoverable_apis $object_storage_api_extensions
# Validation
iniset $TEMPEST_CONFIG validation run_validation ${TEMPEST_RUN_VALIDATION:-False}
iniset $TEMPEST_CONFIG validation ip_version_for_ssh 4
iniset $TEMPEST_CONFIG validation ssh_timeout $BUILD_TIMEOUT
iniset $TEMPEST_CONFIG validation image_ssh_user ${DEFAULT_INSTANCE_USER:-cirros}
iniset $TEMPEST_CONFIG validation network_for_ssh $PRIVATE_NETWORK_NAME
# Volume
# TODO(obutenko): Remove the incremental_backup_force flag when Kilo and Juno is end of life.
iniset $TEMPEST_CONFIG volume-feature-enabled incremental_backup_force True
# TODO(ynesenenko): Remove the volume_services flag when Liberty and Kilo will correct work with host info.
iniset $TEMPEST_CONFIG volume-feature-enabled volume_services True
local volume_api_extensions=${VOLUME_API_EXTENSIONS:-"all"}
if [[ ! -z "$DISABLE_VOLUME_API_EXTENSIONS" ]]; then
# Enabled extensions are either the ones explicitly specified or those available on the API endpoint
volume_api_extensions=${VOLUME_API_EXTENSIONS:-$(iniget $tmp_cfg_file volume-feature-enabled api_extensions | tr -d " ")}
# Remove disabled extensions
volume_api_extensions=$(remove_disabled_extensions $volume_api_extensions $DISABLE_VOLUME_API_EXTENSIONS)
fi
iniset $TEMPEST_CONFIG volume-feature-enabled api_extensions $volume_api_extensions
if ! is_service_enabled c-bak; then
iniset $TEMPEST_CONFIG volume-feature-enabled backup False
fi
# Using ``CINDER_ENABLED_BACKENDS``
if [[ -n "$CINDER_ENABLED_BACKENDS" ]] && [[ $CINDER_ENABLED_BACKENDS =~ .*,.* ]]; then
iniset $TEMPEST_CONFIG volume-feature-enabled multi_backend "True"
local i=1
local be
for be in ${CINDER_ENABLED_BACKENDS//,/ }; do
local be_name=${be##*:}
iniset $TEMPEST_CONFIG volume "backend${i}_name" "$be_name"
i=$(( i + 1 ))
done
fi
if [ $TEMPEST_VOLUME_DRIVER != "default" -o \
"$TEMPEST_VOLUME_VENDOR" != "$TEMPEST_DEFAULT_VOLUME_VENDOR" ]; then
iniset $TEMPEST_CONFIG volume vendor_name "$TEMPEST_VOLUME_VENDOR"
fi
if [ $TEMPEST_VOLUME_DRIVER != "default" -o \
"$TEMPEST_STORAGE_PROTOCOL" != "$TEMPEST_DEFAULT_STORAGE_PROTOCOL" ]; then
iniset $TEMPEST_CONFIG volume storage_protocol "$TEMPEST_STORAGE_PROTOCOL"
fi
# Dashboard
iniset $TEMPEST_CONFIG dashboard dashboard_url "http://$SERVICE_HOST/"
# CLI
iniset $TEMPEST_CONFIG cli cli_dir $NOVA_BIN_DIR
# Baremetal
if [ "$VIRT_DRIVER" = "ironic" ] ; then
iniset $TEMPEST_CONFIG baremetal driver_enabled True
iniset $TEMPEST_CONFIG baremetal unprovision_timeout $BUILD_TIMEOUT
iniset $TEMPEST_CONFIG baremetal active_timeout $BUILD_TIMEOUT
iniset $TEMPEST_CONFIG baremetal deploy_img_dir $FILES
iniset $TEMPEST_CONFIG baremetal node_uuid $IRONIC_NODE_UUID
iniset $TEMPEST_CONFIG compute-feature-enabled change_password False
iniset $TEMPEST_CONFIG compute-feature-enabled console_output False
iniset $TEMPEST_CONFIG compute-feature-enabled interface_attach False
iniset $TEMPEST_CONFIG compute-feature-enabled live_migration False
iniset $TEMPEST_CONFIG compute-feature-enabled pause False
iniset $TEMPEST_CONFIG compute-feature-enabled rescue False
iniset $TEMPEST_CONFIG compute-feature-enabled resize False
iniset $TEMPEST_CONFIG compute-feature-enabled shelve False
iniset $TEMPEST_CONFIG compute-feature-enabled snapshot False
iniset $TEMPEST_CONFIG compute-feature-enabled suspend False
fi
# Libvirt-LXC
if [ "$VIRT_DRIVER" = "libvirt" ] && [ "$LIBVIRT_TYPE" = "lxc" ]; then
iniset $TEMPEST_CONFIG compute-feature-enabled rescue False
iniset $TEMPEST_CONFIG compute-feature-enabled resize False
iniset $TEMPEST_CONFIG compute-feature-enabled shelve False
iniset $TEMPEST_CONFIG compute-feature-enabled snapshot False
iniset $TEMPEST_CONFIG compute-feature-enabled suspend False
fi
# ``service_available``
#
# this tempest service list needs to be all the services that
# tempest supports, otherwise we can have an erroneous set of
# defaults (something defaulting true in Tempest, but not listed here).
local service
local tempest_services="key,glance,nova,neutron,cinder,swift,heat,ceilometer,horizon,sahara,ironic,trove"
for service in ${tempest_services//,/ }; do
if is_service_enabled $service ; then
iniset $TEMPEST_CONFIG service_available $service "True"
else
iniset $TEMPEST_CONFIG service_available $service "False"
fi
done
if [ "$VIRT_DRIVER" = "libvirt" ] && [ "$LIBVIRT_TYPE" = "lxc" ]; then
# libvirt-lxc does not support boot from volume or attaching volumes
# so basically anything with cinder is out of the question.
iniset $TEMPEST_CONFIG service_available cinder "False"
fi
# Restore IFS
IFS=$ifs
}
# install_tempest_lib() - Collect source, prepare, and install ``tempest-lib``
function install_tempest_lib {
if use_library_from_git "tempest-lib"; then
git_clone_by_name "tempest-lib"
setup_dev_lib "tempest-lib"
# NOTE(mtreinish) For testing ``tempest-lib`` from git with Tempest we need to
# put the git version of ``tempest-lib`` in the Tempest job's tox venv
export PIP_VIRTUAL_ENV=${PROJECT_VENV["tempest"]}
setup_dev_lib "tempest-lib"
unset PIP_VIRTUAL_ENV
fi
}
# install_tempest() - Collect source and prepare
function install_tempest {
git_clone $TEMPEST_REPO $TEMPEST_DIR $TEMPEST_BRANCH
pip_install tox
pushd $TEMPEST_DIR
tox --notest -efull
# NOTE(mtreinish) Respect constraints in the tempest full venv, things that
# are using a tox job other than full will not be respecting constraints but
# running pip install -U on tempest requirements
$TEMPEST_DIR/.tox/full/bin/pip install -c $REQUIREMENTS_DIR/upper-constraints.txt -r requirements.txt
PROJECT_VENV["tempest"]=${TEMPEST_DIR}/.tox/full
install_tempest_lib
popd
}
# Restore xtrace
$_XTRACE_TEMPEST
# Tell emacs to use shell-script-mode
## Local variables:
## mode: shell-script
## End:
View Git Blame Copy Permalink