openstack/ironic-inspector
Code Issues Proposed changes
3f5344b6c0
ironic-inspector/ironic_inspector/conf.py
Moshe Levi 1dce3b12d3 Adding InfiniBand Support 
InfiniBand is computer-networking communications standard
used in high-performance computing, features very high
throughput and very low latency.
This patch allow ironic-inspector to add the client_id
to ironic port extra. The client_id option allow pxe boot
from InfiniBand interface.

Closes-Bug: #1532534
Depends-On: Ifad453977e5d3be64b34e544f269835a72b4d73f
Change-Id: I479d54c29bcacb6bd5c1ab20033ae6e428b0e744
2017-02-01 08:34:38 -05:00

237 lines
11 KiB
Python
Raw Blame History

# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
# implied.
# See the License for the specific language governing permissions and
# limitations under the License.
from oslo_config import cfg
from oslo_middleware import cors
from ironic_inspector.common.i18n import _
MIN_VERSION_HEADER = 'X-OpenStack-Ironic-Inspector-API-Minimum-Version'
MAX_VERSION_HEADER = 'X-OpenStack-Ironic-Inspector-API-Maximum-Version'
VERSION_HEADER = 'X-OpenStack-Ironic-Inspector-API-Version'
VALID_ADD_PORTS_VALUES = ('all', 'active', 'pxe')
VALID_KEEP_PORTS_VALUES = ('all', 'present', 'added')
VALID_STORE_DATA_VALUES = ('none', 'swift')
FIREWALL_OPTS = [
cfg.BoolOpt('manage_firewall',
default=True,
help=_('Whether to manage firewall rules for PXE port.')),
cfg.StrOpt('dnsmasq_interface',
default='br-ctlplane',
help=_('Interface on which dnsmasq listens, the default is for '
'VM\'s.')),
cfg.IntOpt('firewall_update_period',
default=15,
help=_('Amount of time in seconds, after which repeat periodic '
'update of firewall.')),
cfg.StrOpt('firewall_chain',
default='ironic-inspector',
help=_('iptables chain name to use.')),
cfg.ListOpt('ethoib_interfaces',
default=[],
help=_('List of Etherent Over InfiniBand interfaces '
'on the Inspector host which are used for physical '
'access to the DHCP network. Multiple interfaces would '
'be attached to a bond or bridge specified in '
'dnsmasq_interface. The MACs of the InfiniBand nodes '
'which are not in desired state are going to be '
'blacklisted based on the list of neighbor MACs '
'on these interfaces.')),
]
PROCESSING_OPTS = [
cfg.StrOpt('add_ports',
default='pxe',
help=_('Which MAC addresses to add as ports during '
'introspection. Possible values: all '
'(all MAC addresses), active (MAC addresses of NIC with '
'IP addresses), pxe (only MAC address of NIC node PXE '
'booted from, falls back to "active" if PXE MAC is not '
'supplied by the ramdisk).'),
choices=VALID_ADD_PORTS_VALUES),
cfg.StrOpt('keep_ports',
default='all',
help=_('Which ports (already present on a node) to keep after '
'introspection. Possible values: all (do not delete '
'anything), present (keep ports which MACs were present '
'in introspection data), added (keep only MACs that we '
'added during introspection).'),
choices=VALID_KEEP_PORTS_VALUES),
cfg.BoolOpt('overwrite_existing',
default=True,
help=_('Whether to overwrite existing values in node '
'database. Disable this option to make '
'introspection a non-destructive operation.')),
cfg.BoolOpt('enable_setting_ipmi_credentials',
default=False,
help=_('Whether to enable setting IPMI credentials during '
'introspection. This feature will be removed in the '
'Pike release.'),
deprecated_for_removal=True),
cfg.StrOpt('default_processing_hooks',
default='ramdisk_error,root_disk_selection,scheduler,'
'validate_interfaces,capabilities,pci_devices',
help=_('Comma-separated list of default hooks for processing '
'pipeline. Hook \'scheduler\' updates the node with the '
'minimum properties required by the Nova scheduler. '
'Hook \'validate_interfaces\' ensures that valid NIC '
'data was provided by the ramdisk. '
'Do not exclude these two unless you really know what '
'you\'re doing.')),
cfg.StrOpt('processing_hooks',
default='$default_processing_hooks',
help=_('Comma-separated list of enabled hooks for processing '
'pipeline. The default for this is '
'$default_processing_hooks, hooks can be added before '
'or after the defaults like this: '
'"prehook,$default_processing_hooks,posthook".')),
cfg.StrOpt('ramdisk_logs_dir',
help=_('If set, logs from ramdisk will be stored in this '
'directory.')),
cfg.BoolOpt('always_store_ramdisk_logs',
default=False,
help=_('Whether to store ramdisk logs even if it did not '
'return an error message (dependent upon '
'"ramdisk_logs_dir" option being set).')),
cfg.StrOpt('node_not_found_hook',
help=_('The name of the hook to run when inspector receives '
'inspection information from a node it isn\'t already '
'aware of. This hook is ignored by default.')),
cfg.StrOpt('store_data',
default='none',
choices=VALID_STORE_DATA_VALUES,
help=_('Method for storing introspection data. If set to \'none'
'\', introspection data will not be stored.')),
cfg.StrOpt('store_data_location',
help=_('Name of the key to store the location of stored data '
'in the extra column of the Ironic database.')),
cfg.BoolOpt('disk_partitioning_spacing',
default=True,
help=_('Whether to leave 1 GiB of disk size untouched for '
'partitioning. Only has effect when used with the IPA '
'as a ramdisk, for older ramdisk local_gb is '
'calculated on the ramdisk side.')),
cfg.BoolOpt('log_bmc_address',
default=True,
help=_('Whether to log node BMC address with every message '
'during processing.'),
deprecated_for_removal=True),
cfg.StrOpt('ramdisk_logs_filename_format',
default='{uuid}_{dt:%Y%m%d-%H%M%S.%f}.tar.gz',
help=_('File name template for storing ramdisk logs. The '
'following replacements can be used: '
'{uuid} - node UUID or "unknown", '
'{bmc} - node BMC address or "unknown", '
'{dt} - current UTC date and time, '
'{mac} - PXE booting MAC or "unknown".')),
cfg.BoolOpt('power_off',
default=True,
help=_('Whether to power off a node after introspection.')),
]
SERVICE_OPTS = [
cfg.StrOpt('listen_address',
default='0.0.0.0',
help=_('IP to listen on.')),
cfg.PortOpt('listen_port',
default=5050,
help=_('Port to listen on.')),
cfg.StrOpt('auth_strategy',
default='keystone',
choices=('keystone', 'noauth'),
help=_('Authentication method used on the ironic-inspector '
'API. Either "noauth" or "keystone" are currently valid '
'options. "noauth" will disable all authentication.')),
cfg.IntOpt('timeout',
default=3600,
help=_('Timeout after which introspection is considered '
'failed, set to 0 to disable.')),
cfg.IntOpt('node_status_keep_time',
default=604800,
help=_('For how much time (in seconds) to keep status '
'information about nodes after introspection was '
'finished for them. Default value is 1 week.')),
cfg.IntOpt('clean_up_period',
default=60,
help=_('Amount of time in seconds, after which repeat clean up '
'of timed out nodes and old nodes status information.')),
cfg.BoolOpt('use_ssl',
default=False,
help=_('SSL Enabled/Disabled')),
cfg.StrOpt('ssl_cert_path',
default='',
help=_('Path to SSL certificate')),
cfg.StrOpt('ssl_key_path',
default='',
help=_('Path to SSL key')),
cfg.IntOpt('max_concurrency',
default=1000, min=2,
help=_('The green thread pool size.')),
cfg.IntOpt('introspection_delay',
default=5,
help=_('Delay (in seconds) between two introspections.')),
cfg.StrOpt('introspection_delay_drivers',
default='.*',
help=_('Only node with drivers matching this regular '
'expression will be affected by introspection_delay '
'setting.'),
deprecated_for_removal=True),
cfg.ListOpt('ipmi_address_fields',
default=['ilo_address', 'drac_host', 'drac_address',
'cimc_address'],
help=_('Ironic driver_info fields that are equivalent '
'to ipmi_address.')),
cfg.StrOpt('rootwrap_config',
default="/etc/ironic-inspector/rootwrap.conf",
help=_('Path to the rootwrap configuration file to use for '
'running commands as root')),
cfg.IntOpt('api_max_limit', default=1000, min=1,
help=_('Limit the number of elements an API list-call returns'))
]
cfg.CONF.register_opts(SERVICE_OPTS)
cfg.CONF.register_opts(FIREWALL_OPTS, group='firewall')
cfg.CONF.register_opts(PROCESSING_OPTS, group='processing')
def list_opts():
return [
('', SERVICE_OPTS),
('firewall', FIREWALL_OPTS),
('processing', PROCESSING_OPTS),
]
def set_config_defaults():
"""This method updates all configuration default values."""
set_cors_middleware_defaults()
def set_cors_middleware_defaults():
"""Update default configuration options for oslo.middleware."""
# TODO(krotscheck): Update with https://review.openstack.org/#/c/285368/
cfg.set_defaults(
cors.CORS_OPTS,
allow_headers=['X-Auth-Token',
MIN_VERSION_HEADER,
MAX_VERSION_HEADER,
VERSION_HEADER],
allow_methods=['GET', 'POST', 'PUT', 'HEAD',
'PATCH', 'DELETE', 'OPTIONS']
)
View Git Blame Copy Permalink