From ce4d8a6bcfcb90f4c5101d62e857fda9d4594068 Mon Sep 17 00:00:00 2001
From: Paresh Sao <paresh.sao@hpe.com>
Date: Wed, 20 Dec 2023 10:34:31 +0000
Subject: [PATCH] [Docs] Adds changes to 'iLO' docs regarding Gen11 support

Documentation patch for declaring support for new Gen11 HPE servers
based on 'iLO6' firmware.

Change-Id: I4fc292156a0abb84f38bec131efe2b1305548b9a
---
 doc/source/admin/drivers/ilo.rst | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/doc/source/admin/drivers/ilo.rst b/doc/source/admin/drivers/ilo.rst
index 40f2dc77d3..5d3bc912d0 100644
--- a/doc/source/admin/drivers/ilo.rst
+++ b/doc/source/admin/drivers/ilo.rst
@@ -20,6 +20,11 @@ known issues, etc), please check the `iLO driver wiki page <https://wiki.opensta
 For enabling Gen10 systems and getting detailed information on Gen10 feature
 support in Ironic please check this `Gen10 wiki section`_.
 
+.. warning::
+   Starting from Gen11 servers and above (iLO6 and above) use ``redfish``
+   (see :doc:`redfish`) hardware type for baremetal provisioning and
+   management.
+
 Hardware type
 =============
 
@@ -30,9 +35,6 @@ hardware can be used with reference hardware type ``ipmi`` (see
 to enable the ``ilo`` and ``ilo5`` hardware type, see
 :ref:`enable-hardware-types`.
 
-.. note::
-   Only HPE ProLiant Gen10 servers supports hardware type ``redfish``.
-
 .. warning::
    It is important to note that while the HPE Edgeline series of servers may
    contain iLO adapters, they are known to not be compatible with the ``ilo``