diff --git a/doc/source/deploy/adoption.rst b/doc/source/deploy/adoption.rst
index b3d769f0e5..f2fc56e80b 100644
--- a/doc/source/deploy/adoption.rst
+++ b/doc/source/deploy/adoption.rst
@@ -115,7 +115,7 @@ agent_ipmitool example
 
 This is an example to create a new node, named ``testnode``, with
 sufficient information to pass basic validation in order to be taken
-from the ``manageable`` state to ``active`` state.::
+from the ``manageable`` state to ``active`` state::
 
     # Explicitly set the client API version environment variable to
     # 1.17, which introduces the adoption capability.
diff --git a/doc/source/dev/dev-quickstart.rst b/doc/source/dev/dev-quickstart.rst
index c58b22a0d8..1aeffaf445 100644
--- a/doc/source/dev/dev-quickstart.rst
+++ b/doc/source/dev/dev-quickstart.rst
@@ -429,7 +429,7 @@ significant changes to ironic's python modules, or simply keep the virtualenv
 around for a long time, your development environment may reach an inconsistent
 state. It may help to delete cached ".pyc" files, update dependencies,
 reinstall ironic, or even recreate the virtualenv. The following commands may
-help with that, but are not an exhaustive troubleshooting guide.::
+help with that, but are not an exhaustive troubleshooting guide::
 
   # clear cached pyc files
   cd ~/ironic/ironic
diff --git a/doc/source/drivers/ilo.rst b/doc/source/drivers/ilo.rst
index 53476843f0..ca550c7213 100644
--- a/doc/source/drivers/ilo.rst
+++ b/doc/source/drivers/ilo.rst
@@ -18,7 +18,7 @@ Currently there are 3 iLO drivers:
 
 * ``iscsi_ilo``
 * ``agent_ilo``
-* ``pxe_ilo``.
+* ``pxe_ilo``
 
 The ``iscsi_ilo`` and ``agent_ilo`` drivers provide security enhanced
 PXE-less deployment by using iLO virtual media to boot up the bare metal node.
@@ -43,7 +43,7 @@ Prerequisites
   which contains set of modules for managing HPE ProLiant hardware.
 
   Install ``proliantutils`` module on the ironic conductor node. Minimum
-  version required is 2.1.11.::
+  version required is 2.1.11::
 
    $ pip install "proliantutils>=2.1.11"
 
@@ -69,7 +69,7 @@ Glance Configuration
 
 3. Fill the required parameters in the ``[glance]`` section   in
    ``/etc/ironic/ironic.conf``. Normally you would be required to fill in the
-   following details.::
+   following details::
 
     [glance]
     swift_temp_url_key=mysecretkeyforglance
@@ -90,7 +90,7 @@ Glance Configuration
 
 4. Swift must be accessible with the same admin credentials configured in
    Ironic. For example, if Ironic is configured with the below credentials in
-   ``/etc/ironic/ironic.conf``.::
+   ``/etc/ironic/ironic.conf``::
 
     [keystone_authtoken]
     admin_password = password
@@ -117,7 +117,7 @@ Glance Configuration
                     Content-Type: text/plain; charset=utf-8
                    Accept-Ranges: bytes
 
-5. Restart the Ironic conductor service.::
+5. Restart the Ironic conductor service::
 
     $ service ironic-conductor restart
 
@@ -170,7 +170,7 @@ Enable driver
 2. See `Glance Configuration`_ for configuring glance image service with its storage
    backend as ``swift``.
 
-3. Upload this image to Glance.::
+3. Upload this image to Glance::
 
     glance image-create --name deploy-ramdisk.iso --disk-format iso --container-format bare < deploy-ramdisk.iso
 
@@ -181,7 +181,7 @@ Enable driver
 
    Similarly it can be added for ``agent_ilo`` and ``pxe_ilo`` drivers.
 
-5. Restart the ironic conductor service.::
+5. Restart the ironic conductor service::
 
     $ service ironic-conductor restart
 
@@ -562,7 +562,7 @@ Configuring and Enabling the driver
 
 1. Build a deploy image, see :ref:`BuildingDibBasedDeployRamdisk`
 
-2. Upload this image to glance.::
+2. Upload this image to glance::
 
     glance image-create --name deploy-ramdisk.kernel --disk-format aki --container-format aki < deploy-ramdisk.kernel
     glance image-create --name deploy-ramdisk.initramfs --disk-format ari --container-format ari < deploy-ramdisk.initramfs
@@ -572,7 +572,7 @@ Configuring and Enabling the driver
 
     enabled_drivers = fake,pxe_ssh,pxe_ipmitool,pxe_ilo
 
-4. Restart the ironic conductor service.::
+4. Restart the ironic conductor service::
 
     service ironic-conductor restart
 
@@ -762,7 +762,7 @@ Refer :ref:`BuildingDibBasedDeployRamdisk` for more information on building
 deploy ramdisk.
 
 The below command creates files named cloud-image-boot.iso, cloud-image.initrd,
-cloud-image.vmlinuz and cloud-image.qcow2 in the current working directory.::
+cloud-image.vmlinuz and cloud-image.qcow2 in the current working directory::
 
  cd <path-to-diskimage-builder>
  ./bin/disk-image-create -o cloud-image ubuntu-signed baremetal iso
diff --git a/doc/source/drivers/oneview.rst b/doc/source/drivers/oneview.rst
index ff02f09dab..7874d2948e 100644
--- a/doc/source/drivers/oneview.rst
+++ b/doc/source/drivers/oneview.rst
@@ -73,7 +73,7 @@ The following requirements apply for both ``iscsi_pxe_oneview`` and
 
   Install the ``python-oneviewclient`` module to enable the communication.
   Minimum version required is 2.4.0 but it is recommended to install the most
-  up-to-date version.::
+  up-to-date version::
 
   $ pip install "python-oneviewclient<3.0.0,>=2.4.0"
 
diff --git a/doc/source/drivers/seamicro.rst b/doc/source/drivers/seamicro.rst
index 355d661408..c475278d91 100644
--- a/doc/source/drivers/seamicro.rst
+++ b/doc/source/drivers/seamicro.rst
@@ -17,7 +17,7 @@ Prerequisites
   for managing SeaMicro Fabric Compute systems.
 
   Install ``python-seamicroclient`` [1]_ module on the Ironic conductor node.
-  Minimum version required is 0.4.0.::
+  Minimum version required is 0.4.0::
 
    $ pip install "python-seamicroclient>=0.4.0"