---
# The following configuration aims to test some of the 'host configure'
# command.

# Additional users.
controller_users:
  - username: kayobe-test-user
    name: Kayobe test user
    password: kayobe-test-user-password
    groups:
      - stack

# Additional network interfaces, testing a variety of interface configurations.
controller_extra_network_interfaces:
  - test_net_eth
  - test_net_eth_vlan
  - test_net_bridge
  - test_net_bridge_vlan
  - test_net_bond
  - test_net_bond_vlan

# dummy2: Ethernet interface.
test_net_eth_cidr: 192.168.34.0/24
test_net_eth_routes:
  - cidr: 192.168.40.0/24
    gateway: 192.168.34.254
test_net_eth_interface: dummy2

# dummy2.42: VLAN subinterface of dummy2.
test_net_eth_vlan_cidr: 192.168.35.0/24
test_net_eth_vlan_interface: "{% raw %}{{ test_net_eth_interface }}.{{ test_net_eth_vlan_vlan }}{% endraw %}"
test_net_eth_vlan_vlan: 42

# br0: bridge with ports dummy3, dummy4.
test_net_bridge_cidr: 192.168.36.0/24
test_net_bridge_interface: br0
test_net_bridge_bridge_ports: [dummy3, dummy4]

# br0.43: VLAN subinterface of br0.
test_net_bridge_vlan_cidr: 192.168.37.0/24
test_net_bridge_vlan_interface: "{% raw %}{{ test_net_bridge_interface }}.{{ test_net_bridge_vlan_vlan }}{% endraw %}"
test_net_bridge_vlan_vlan: 43

# bond0: bond with slaves dummy5, dummy6.
test_net_bond_cidr: 192.168.38.0/24
test_net_bond_interface: bond0
test_net_bond_bond_slaves: [dummy5, dummy6]

# bond0.44: VLAN subinterface of bond0.
test_net_bond_vlan_cidr: 192.168.39.0/24
test_net_bond_vlan_interface: "{% raw %}{{ test_net_bond_interface }}.{{ test_net_bond_vlan_vlan }}{% endraw %}"
test_net_bond_vlan_vlan: 44

# Define a software RAID device consisting of two loopback devices.
controller_mdadm_arrays:
  - name: md0
    devices:
      - /dev/loop0
      - /dev/loop1
    level: '1'
    state: present

# Layer LUKS encryption on top of the software RAID
controller_luks_devices:
  - name: loopback-crypt
    device: /dev/md0

# Create an LVM volume group for Docker volumes and devicemapper.
controller_lvm_groups:
  - "{% raw %}{{ controller_lvm_group_data }}{% endraw %}"

# Provide a disk for use by LVM. Uses the LUKS encrypted device created above.
controller_lvm_group_data_disks:
  - /dev/mapper/loopback-crypt

# Set a sysctl.
controller_sysctl_parameters:
  fs.mount-max: 99999

# Disable cloud-init.
disable_cloud_init: true

# Use devicemapper storage driver.
docker_storage_driver: devicemapper

# Set Honolulu time.
timezone: Pacific/Honolulu

{% if ansible_os_family == 'RedHat' %}
# Use a local DNF mirror.
dnf_use_local_mirror: true
# Mirror FQDN for DNF repos.
dnf_centos_mirror_host: "{{ zuul_site_mirror_fqdn }}"
# Mirror directory for DNF CentOS repos.
dnf_centos_mirror_directory: 'centos'
# Mirror FQDN for DNF EPEL repos.
dnf_epel_mirror_host: "{{ zuul_site_mirror_fqdn }}"
# Mirror directory for DNF EPEL repos.
dnf_epel_mirror_directory: 'epel'
# Configure a custom DNF repository.
dnf_custom_repos:
  td-agent:
    baseurl: http://packages.treasuredata.com/3/redhat/$releasever/$basearch
    gpgkey: https://packages.treasuredata.com/GPG-KEY-td-agent
    gpgcheck: yes
# Enable DNF Automatic.
dnf_automatic_enabled: true
{% endif %}