openstack/kolla-ansible
Code Issues Proposed changes
b5d1e4b457
kolla-ansible/ansible/site.yml

425 lines
8.9 KiB
YAML
Raw Normal View History

Initial commit for adding ansible support This adds a very basic structure to begin supporting ansible in Kolla. Ansible can support complete idempotency, but wrapping docker-compose does not allow idempotency at this time. These playbooks will be extended to compensate for that in future patches. Change-Id: I1c9e8d32321e2733f5a9b752edf74b4fe90317ed
2015-03-28 17:16:24 -05:00
---
Remove redundant common play and add haproxy hosts In cf0c25c37 [0] a play was added to run the common role against all hosts. This ends up being redundant since every role includes the common role as a dependancy. The reasoning behind this change as pointed out by the author in the review comments [1] was so that an operator could run with '--tags common' and just have the common role applied. To avoid redundancy, the common play has been removed and tags have been added to the common role. This allows for just the common role to run when another role is including it while reducing redundancy. A side affect of removing the common playbook which runs against all hosts is that not all facts on all hosts are gathered at the beginning of the site.yml. This breaks the haproxy role since it relies heavily on facts to build out the haproxy.cfg file. Previously, the haproxy role would include several hosts purely for fact gathering purposes as pointed out in c68c9d95 [2] and a guard was put in place so that the tasks would only run against the 'haproxy' group. In 423e3f3f [3] these hosts were removed. After reading the review [4], this seems to have been done without fully understanding why the hosts were there in the first place. This change did not break anything however since the common role that ran on all hosts mentioned previously would gather all of the facts necessary. To fix this fact gathering issue replace the common role play with a play that will simply gather facts with an 'always' tag to ensure it is run regardless of what might be passed in the '--tags' argument by the operator. Kudos to Paul Bourke for helping identify many of these issues. [0] https://github.com/openstack/kolla/commit/cf0c25c37d4dd901a839a12247212c22493e1409 [1] https://review.openstack.org/#/c/369212/ [2] https://github.com/openstack/kolla/commit/c68c9d95fca6485c79a607b3716a88e284c7a64e [3] https://github.com/openstack/kolla/commit/423e3f3fdf07f40b46fed1125076880660d14c53 [4] https://review.openstack.org/#/c/355861 TrivialFix Closes-Bug: #1628472 Change-Id: Ia94146579e743935501f1ff4b4c1bf6cb7c43aa3
2016-09-26 09:37:11 -04:00
# NOTE(awiddersheim): Gather facts for all hosts as a
# first step since several plays below require them when
# building their configurations. The below 'gather_facts'
# set to 'false' is a bit confusing but this is to avoid
# Ansible gathering facts twice.
- name: Gather facts for all hosts
Fix fact gathering when using --limit If an operator wants to deploy a single node (e.g. add an additional compute), they may want to use the --limit feature of Ansible to avoid waiting for every play across every node. The problem with this is that --limit will gather facts for that node only, causing template errors such as the infamous ('dict object' has no attribute u'ansible_eth0'"). Ansible has catered to this problem to an extent with it's "delegate_facts" mechanism. The only problem is that in the default 'all nodes' case, we end up with a storm of SSHs as each node SSHs to every other. I'm solving this with a separate task to only use this mechanism when a subset of nodes has been specified (see ansible_play_batch). Useful links on this subject: - https://medium.com/@george.shuklin/perfecting-forced-fact-gathering-in-ansible-1611f9c8d0d5#.tr5zs3e7x - http://docs.ansible.com/ansible/playbooks_delegation.html#delegated-facts Change-Id: Ibb691eae15cacd9e5129ae9280fd296f5ba95940 Closes-Bug: 1642004
2016-11-15 17:14:35 +00:00
hosts: all
Optimized the serial upgrade and reconfigure * add serial for reconfigure * set playbook serial by using variable * fix serial for barbican, influxdb and vmtp Closes-Bug: #1624607 Change-Id: I66530c7736e1673a592eddbde75637825d12d9e2
2016-09-17 10:31:36 +08:00
serial: '{{ serial|default("0") }}'
Remove redundant common play and add haproxy hosts In cf0c25c37 [0] a play was added to run the common role against all hosts. This ends up being redundant since every role includes the common role as a dependancy. The reasoning behind this change as pointed out by the author in the review comments [1] was so that an operator could run with '--tags common' and just have the common role applied. To avoid redundancy, the common play has been removed and tags have been added to the common role. This allows for just the common role to run when another role is including it while reducing redundancy. A side affect of removing the common playbook which runs against all hosts is that not all facts on all hosts are gathered at the beginning of the site.yml. This breaks the haproxy role since it relies heavily on facts to build out the haproxy.cfg file. Previously, the haproxy role would include several hosts purely for fact gathering purposes as pointed out in c68c9d95 [2] and a guard was put in place so that the tasks would only run against the 'haproxy' group. In 423e3f3f [3] these hosts were removed. After reading the review [4], this seems to have been done without fully understanding why the hosts were there in the first place. This change did not break anything however since the common role that ran on all hosts mentioned previously would gather all of the facts necessary. To fix this fact gathering issue replace the common role play with a play that will simply gather facts with an 'always' tag to ensure it is run regardless of what might be passed in the '--tags' argument by the operator. Kudos to Paul Bourke for helping identify many of these issues. [0] https://github.com/openstack/kolla/commit/cf0c25c37d4dd901a839a12247212c22493e1409 [1] https://review.openstack.org/#/c/369212/ [2] https://github.com/openstack/kolla/commit/c68c9d95fca6485c79a607b3716a88e284c7a64e [3] https://github.com/openstack/kolla/commit/423e3f3fdf07f40b46fed1125076880660d14c53 [4] https://review.openstack.org/#/c/355861 TrivialFix Closes-Bug: #1628472 Change-Id: Ia94146579e743935501f1ff4b4c1bf6cb7c43aa3
2016-09-26 09:37:11 -04:00
gather_facts: false
tasks:
- setup:
tags: always
Add common role to Ansible site file TrivialFix Change-Id: I209a810e68bd0ad3fdaedb3cda8a3f7c7d9836e4
2016-09-13 10:10:43 +02:00
Fix fact gathering when using --limit If an operator wants to deploy a single node (e.g. add an additional compute), they may want to use the --limit feature of Ansible to avoid waiting for every play across every node. The problem with this is that --limit will gather facts for that node only, causing template errors such as the infamous ('dict object' has no attribute u'ansible_eth0'"). Ansible has catered to this problem to an extent with it's "delegate_facts" mechanism. The only problem is that in the default 'all nodes' case, we end up with a storm of SSHs as each node SSHs to every other. I'm solving this with a separate task to only use this mechanism when a subset of nodes has been specified (see ansible_play_batch). Useful links on this subject: - https://medium.com/@george.shuklin/perfecting-forced-fact-gathering-in-ansible-1611f9c8d0d5#.tr5zs3e7x - http://docs.ansible.com/ansible/playbooks_delegation.html#delegated-facts Change-Id: Ibb691eae15cacd9e5129ae9280fd296f5ba95940 Closes-Bug: 1642004
2016-11-15 17:14:35 +00:00
# NOTE(pbourke): This case covers deploying subsets of hosts using --limit. The
# limit arg will cause the first play to gather facts only about that node,
# meaning facts such as IP addresses for rabbitmq nodes etc. will be undefined
# in the case of adding a single compute node.
# We don't want to add the delegate parameters to the above play as it will
# result in ((num_nodes-1)^2) number of SSHs when running for all nodes
# which can be very inefficient.
- name: Gather facts for all hosts (if using --limit)
hosts: all
serial: '{{ serial|default("0") }}'
gather_facts: false
tasks:
- setup:
delegate_facts: True
delegate_to: "{{ item }}"
with_items: "{{ groups['all'] }}"
when:
- (play_hosts | length) != (groups['all'] | length)
Move precheck into its own role * Merge prechecks.yml and site.yml playbook * Create empty precheck.yml into all roles. Change-Id: I8a138558a26c0a2a66c5fd48ed37be657c99c1dd Implements: blueprint condition-pre-check
2016-11-03 14:48:58 +08:00
- hosts:
- all
roles:
- role: prechecks
when: action == "precheck"
Small refactor for site.yml As the bug mentions this file is complex and has caused problems in the past. It will likely cause problems in the future. Change-Id: I28db6a38406ce0dd38340319eea7ef9134682007 Closes-Bug: #1512582
2015-11-03 05:47:47 +00:00
- hosts:
- ceph-mon
- ceph-osd
Add RadosGW container Implements blueprint radosgw-container Change-Id: Idc88a67a0979be626d3eaa9b2b9a527010aa2006
2015-12-23 23:17:47 +02:00
- ceph-rgw
Optimized the serial upgrade and reconfigure * add serial for reconfigure * set playbook serial by using variable * fix serial for barbican, influxdb and vmtp Closes-Bug: #1624607 Change-Id: I66530c7736e1673a592eddbde75637825d12d9e2
2016-09-17 10:31:36 +08:00
serial: '{{ serial|default("0") }}'
Ceph Ansible support Add the initial playbooks for making ceph and ansible play nice together. This does not include all of the openstack changes to make things like nova, glance, and cinder work. This will simply build the ceph cluster and thats it. The next patchset will do the OpenStack integration. DocImpact Change-Id: Ie1697dde5f92e833652933a80f0004f31b641330 Partially-Implements: blueprint ceph-container
2015-08-29 11:49:57 +00:00
roles:
Small refactor for site.yml As the bug mentions this file is complex and has caused problems in the past. It will likely cause problems in the future. Change-Id: I28db6a38406ce0dd38340319eea7ef9134682007 Closes-Bug: #1512582
2015-11-03 05:47:47 +00:00
- { role: ceph,
tags: ceph,
when: enable_ceph | bool }
Ceph Ansible support Add the initial playbooks for making ceph and ansible play nice together. This does not include all of the openstack changes to make things like nova, glance, and cinder work. This will simply build the ceph cluster and thats it. The next patchset will do the OpenStack integration. DocImpact Change-Id: Ie1697dde5f92e833652933a80f0004f31b641330 Partially-Implements: blueprint ceph-container
2015-08-29 11:49:57 +00:00
Ansible roles for collectd Container Collectd-ceilometer-plugin is essential for further more detailed metrics collection, smarter scheduling and service assurance. Change-Id: I8da572980de370517ec120d745ad1d36e316b465 Implements: blueprint collectd-ceilometer-plugin
2016-09-09 10:20:18 +01:00
- hosts: collectd
Optimized the serial upgrade and reconfigure * add serial for reconfigure * set playbook serial by using variable * fix serial for barbican, influxdb and vmtp Closes-Bug: #1624607 Change-Id: I66530c7736e1673a592eddbde75637825d12d9e2
2016-09-17 10:31:36 +08:00
serial: '{{ serial|default("0") }}'
Ansible roles for collectd Container Collectd-ceilometer-plugin is essential for further more detailed metrics collection, smarter scheduling and service assurance. Change-Id: I8da572980de370517ec120d745ad1d36e316b465 Implements: blueprint collectd-ceilometer-plugin
2016-09-09 10:20:18 +01:00
roles:
- { role: collectd,
tags: collectd,
when: enable_collectd | bool }
Reduce log errors from heka Heka depends on haproxy and keepaived being present to communicate with ElasticSearch. If we start ElasticSearch prior to haproxy and keepalived, the number of errors are reduced in heka. Change-Id: Id2c742ea572c6450a371421e21f34aa69355bb8b Partial-Bug: #1560779
2016-03-23 18:16:04 -04:00
- hosts: elasticsearch
Optimized the serial upgrade and reconfigure * add serial for reconfigure * set playbook serial by using variable * fix serial for barbican, influxdb and vmtp Closes-Bug: #1624607 Change-Id: I66530c7736e1673a592eddbde75637825d12d9e2
2016-09-17 10:31:36 +08:00
serial: '{{ serial|default("0") }}'
Reduce log errors from heka Heka depends on haproxy and keepaived being present to communicate with ElasticSearch. If we start ElasticSearch prior to haproxy and keepalived, the number of errors are reduced in heka. Change-Id: Id2c742ea572c6450a371421e21f34aa69355bb8b Partial-Bug: #1560779
2016-03-23 18:16:04 -04:00
roles:
- { role: elasticsearch,
tags: elasticsearch,
Enable central logging without deploying elasticsearch/kibana This changed introduces 4 new parameters to be able to use an existing elasticsearch service for central logging. * elasticsearch_address - address of elasticsearch server * elasticsearch_protocol - protocol (HTTP/HTTPS) used by elasticsearch server * enable_elasticsearch - deploy elasticsearch container * enable_kibana - deploy kibana container Closes-bug: #1584861 Change-Id: Ia1ff9ae8b6d9929c3826da02693d1e2fc9ea2522
2016-05-23 17:45:52 +02:00
when: enable_elasticsearch | bool }
Reduce log errors from heka Heka depends on haproxy and keepaived being present to communicate with ElasticSearch. If we start ElasticSearch prior to haproxy and keepalived, the number of errors are reduced in heka. Change-Id: Id2c742ea572c6450a371421e21f34aa69355bb8b Partial-Bug: #1560779
2016-03-23 18:16:04 -04:00
Added influxdb role Added ansible role for influxdb Introduced host groups for monitoring and influxdb and assign role Monitoring is deployed on a separate node called monitoring01 by default Co-Authored-By: zhubingbing <zhubingbing10@gmail.com> Change-Id: If2465a14b18c6c3fd657af587a0b85f6b7a0191a Partially-Implements: Blueprint performance-monitoring
2016-07-27 06:23:29 +00:00
- hosts: influxdb
Optimized the serial upgrade and reconfigure * add serial for reconfigure * set playbook serial by using variable * fix serial for barbican, influxdb and vmtp Closes-Bug: #1624607 Change-Id: I66530c7736e1673a592eddbde75637825d12d9e2
2016-09-17 10:31:36 +08:00
serial: '{{ serial|default("0") }}'
Added influxdb role Added ansible role for influxdb Introduced host groups for monitoring and influxdb and assign role Monitoring is deployed on a separate node called monitoring01 by default Co-Authored-By: zhubingbing <zhubingbing10@gmail.com> Change-Id: If2465a14b18c6c3fd657af587a0b85f6b7a0191a Partially-Implements: Blueprint performance-monitoring
2016-07-27 06:23:29 +00:00
roles:
- { role: influxdb,
tags: influxdb,
when: enable_influxdb | bool }
Added telegraf role Added ansible role to deploy telegraf Roll out telegraf to all nodes Introduce parameter to toggle deployment of performance monitoring Co-Authored-By: zhubingbing <zhubingbing10@gmail.com> Change-Id: Ia09b20ce65bf557c1a1030eda99df5cc88debd01 Partially-Implements: Blueprint performance-monitoring
2016-07-23 17:34:03 +00:00
- hosts:
- telegraf
Optimized the serial upgrade and reconfigure * add serial for reconfigure * set playbook serial by using variable * fix serial for barbican, influxdb and vmtp Closes-Bug: #1624607 Change-Id: I66530c7736e1673a592eddbde75637825d12d9e2
2016-09-17 10:31:36 +08:00
serial: '{{ serial|default("0") }}'
Added telegraf role Added ansible role to deploy telegraf Roll out telegraf to all nodes Introduce parameter to toggle deployment of performance monitoring Co-Authored-By: zhubingbing <zhubingbing10@gmail.com> Change-Id: Ia09b20ce65bf557c1a1030eda99df5cc88debd01 Partially-Implements: Blueprint performance-monitoring
2016-07-23 17:34:03 +00:00
roles:
- { role: telegraf,
tags: telegraf,
when: enable_telegraf | bool }
Remove redundant common play and add haproxy hosts In cf0c25c37 [0] a play was added to run the common role against all hosts. This ends up being redundant since every role includes the common role as a dependancy. The reasoning behind this change as pointed out by the author in the review comments [1] was so that an operator could run with '--tags common' and just have the common role applied. To avoid redundancy, the common play has been removed and tags have been added to the common role. This allows for just the common role to run when another role is including it while reducing redundancy. A side affect of removing the common playbook which runs against all hosts is that not all facts on all hosts are gathered at the beginning of the site.yml. This breaks the haproxy role since it relies heavily on facts to build out the haproxy.cfg file. Previously, the haproxy role would include several hosts purely for fact gathering purposes as pointed out in c68c9d95 [2] and a guard was put in place so that the tasks would only run against the 'haproxy' group. In 423e3f3f [3] these hosts were removed. After reading the review [4], this seems to have been done without fully understanding why the hosts were there in the first place. This change did not break anything however since the common role that ran on all hosts mentioned previously would gather all of the facts necessary. To fix this fact gathering issue replace the common role play with a play that will simply gather facts with an 'always' tag to ensure it is run regardless of what might be passed in the '--tags' argument by the operator. Kudos to Paul Bourke for helping identify many of these issues. [0] https://github.com/openstack/kolla/commit/cf0c25c37d4dd901a839a12247212c22493e1409 [1] https://review.openstack.org/#/c/369212/ [2] https://github.com/openstack/kolla/commit/c68c9d95fca6485c79a607b3716a88e284c7a64e [3] https://github.com/openstack/kolla/commit/423e3f3fdf07f40b46fed1125076880660d14c53 [4] https://review.openstack.org/#/c/355861 TrivialFix Closes-Bug: #1628472 Change-Id: Ia94146579e743935501f1ff4b4c1bf6cb7c43aa3
2016-09-26 09:37:11 -04:00
- hosts:
- haproxy
Ansible install of HAProxy This commit consists HAProxy ansible bits including config generation, container deployment and hot reloads. Closes-Bug: #1477915 Co-Authored-By: Sam Yaple <sam@yaple.net> Change-Id: Ie93fa68fdb6b2885889c992ff1267d38b68e0cbc Partially-implements: blueprint ansible-service
2015-07-17 12:20:31 +02:00
roles:
Small refactor for site.yml As the bug mentions this file is complex and has caused problems in the past. It will likely cause problems in the future. Change-Id: I28db6a38406ce0dd38340319eea7ef9134682007 Closes-Bug: #1512582
2015-11-03 05:47:47 +00:00
- { role: haproxy,
tags: haproxy,
when: enable_haproxy | bool }
Ansible install of HAProxy This commit consists HAProxy ansible bits including config generation, container deployment and hot reloads. Closes-Bug: #1477915 Co-Authored-By: Sam Yaple <sam@yaple.net> Change-Id: Ie93fa68fdb6b2885889c992ff1267d38b68e0cbc Partially-implements: blueprint ansible-service
2015-07-17 12:20:31 +02:00
Added Kibana and its deployment. Part of ELK stack. Includes Dockerfiles for both Centos and Ubuntu. Change-Id: I1d955a5c51e416cc572eb2c9b4c57982a1d6ab67 Partially-implements: blueprint central-logging-service
2016-01-20 08:27:00 +01:00
- hosts: kibana
Optimized the serial upgrade and reconfigure * add serial for reconfigure * set playbook serial by using variable * fix serial for barbican, influxdb and vmtp Closes-Bug: #1624607 Change-Id: I66530c7736e1673a592eddbde75637825d12d9e2
2016-09-17 10:31:36 +08:00
serial: '{{ serial|default("0") }}'
Added Kibana and its deployment. Part of ELK stack. Includes Dockerfiles for both Centos and Ubuntu. Change-Id: I1d955a5c51e416cc572eb2c9b4c57982a1d6ab67 Partially-implements: blueprint central-logging-service
2016-01-20 08:27:00 +01:00
roles:
- { role: kibana,
tags: kibana,
Enable central logging without deploying elasticsearch/kibana This changed introduces 4 new parameters to be able to use an existing elasticsearch service for central logging. * elasticsearch_address - address of elasticsearch server * elasticsearch_protocol - protocol (HTTP/HTTPS) used by elasticsearch server * enable_elasticsearch - deploy elasticsearch container * enable_kibana - deploy kibana container Closes-bug: #1584861 Change-Id: Ia1ff9ae8b6d9929c3826da02693d1e2fc9ea2522
2016-05-23 17:45:52 +02:00
when: enable_kibana | bool }
Added Elasticearch and its deployment. Part of ELK stack. Includes Dockerfiles for both Centos and Ubuntu. Change-Id: I9f76adf084cd4f68e29326112b76ffd02b5adada Partially-implements: blueprint central-logging-service
2016-01-14 11:06:29 +01:00
Use memcache for consoleauth and horizon Unfortunately there was no was to avoid memcache for consoleauth, so we might as well take advantage of it for Horizon as well. Change-Id: Idd338a025b031f6b50fe0c9f03c2c8d862f9d4c0 Closes-Bug: #1504606 Closes-Bug: #1504800
2015-10-15 08:54:36 +00:00
- hosts: memcached
Optimized the serial upgrade and reconfigure * add serial for reconfigure * set playbook serial by using variable * fix serial for barbican, influxdb and vmtp Closes-Bug: #1624607 Change-Id: I66530c7736e1673a592eddbde75637825d12d9e2
2016-09-17 10:31:36 +08:00
serial: '{{ serial|default("0") }}'
Use memcache for consoleauth and horizon Unfortunately there was no was to avoid memcache for consoleauth, so we might as well take advantage of it for Horizon as well. Change-Id: Idd338a025b031f6b50fe0c9f03c2c8d862f9d4c0 Closes-Bug: #1504606 Closes-Bug: #1504800
2015-10-15 08:54:36 +00:00
roles:
Small refactor for site.yml As the bug mentions this file is complex and has caused problems in the past. It will likely cause problems in the future. Change-Id: I28db6a38406ce0dd38340319eea7ef9134682007 Closes-Bug: #1512582
2015-11-03 05:47:47 +00:00
- { role: memcached,
tags: [memcache, memcached],
when: enable_memcached | bool }
Use memcache for consoleauth and horizon Unfortunately there was no was to avoid memcache for consoleauth, so we might as well take advantage of it for Horizon as well. Change-Id: Idd338a025b031f6b50fe0c9f03c2c8d862f9d4c0 Closes-Bug: #1504606 Closes-Bug: #1504800
2015-10-15 08:54:36 +00:00
Rename role name to service name The original purpose for having an abstract like 'database' rather than the service name of 'mariadb' has been change. Our direction is different and this patch reflects consistent naming throughout Change-Id: I704896191cc5243f9dab2a4cca9120e9dc2ceb2c Closes-Bug: #1478328
2015-07-26 10:39:07 +00:00
- hosts: mariadb
Optimized the serial upgrade and reconfigure * add serial for reconfigure * set playbook serial by using variable * fix serial for barbican, influxdb and vmtp Closes-Bug: #1624607 Change-Id: I66530c7736e1673a592eddbde75637825d12d9e2
2016-09-17 10:31:36 +08:00
serial: '{{ serial|default("0") }}'
Initial commit for adding ansible support This adds a very basic structure to begin supporting ansible in Kolla. Ansible can support complete idempotency, but wrapping docker-compose does not allow idempotency at this time. These playbooks will be extended to compensate for that in future patches. Change-Id: I1c9e8d32321e2733f5a9b752edf74b4fe90317ed
2015-03-28 17:16:24 -05:00
roles:
Small refactor for site.yml As the bug mentions this file is complex and has caused problems in the past. It will likely cause problems in the future. Change-Id: I28db6a38406ce0dd38340319eea7ef9134682007 Closes-Bug: #1512582
2015-11-03 05:47:47 +00:00
- { role: mariadb,
tags: mariadb,
when: enable_mariadb | bool }
Initial commit for adding ansible support This adds a very basic structure to begin supporting ansible in Kolla. Ansible can support complete idempotency, but wrapping docker-compose does not allow idempotency at this time. These playbooks will be extended to compensate for that in future patches. Change-Id: I1c9e8d32321e2733f5a9b752edf74b4fe90317ed
2015-03-28 17:16:24 -05:00
Add iscsid/tgtd specific parameters to Kolla infrastructure This partially implements iscsi and lvm2 support for cinder in Kolla. Add integration with Kolla infrastructure. Change-Id: I5b7d59163518080f38aec0c00617440de0763f1d Implements: blueprint iscsi-lvm2-docker
2016-03-31 10:40:55 -04:00
- hosts:
- iscsid
- tgtd
Optimized the serial upgrade and reconfigure * add serial for reconfigure * set playbook serial by using variable * fix serial for barbican, influxdb and vmtp Closes-Bug: #1624607 Change-Id: I66530c7736e1673a592eddbde75637825d12d9e2
2016-09-17 10:31:36 +08:00
serial: '{{ serial|default("0") }}'
Add iscsid/tgtd specific parameters to Kolla infrastructure This partially implements iscsi and lvm2 support for cinder in Kolla. Add integration with Kolla infrastructure. Change-Id: I5b7d59163518080f38aec0c00617440de0763f1d Implements: blueprint iscsi-lvm2-docker
2016-03-31 10:40:55 -04:00
roles:
- { role: iscsi,
tags: iscsi,
Cinder cannot use external non-LVM iSCSI storage Currently Cinder enables iscsid service only when LVM is choosen as backend. This fix will allow to specify external iSCSI storage via configuration add-on and to run iscsid independently of LVM settings. Change-Id: Iaae0f8025534e5ab1c5f9d5e812a7d41129915ef Closes-Bug: 1614125
2016-08-17 18:07:10 +03:00
when: enable_iscsid | bool }
Add iscsid/tgtd specific parameters to Kolla infrastructure This partially implements iscsi and lvm2 support for cinder in Kolla. Add integration with Kolla infrastructure. Change-Id: I5b7d59163518080f38aec0c00617440de0763f1d Implements: blueprint iscsi-lvm2-docker
2016-03-31 10:40:55 -04:00
Add multipathing support to docker container Due some cinder drivers need multipathing support like this one http://docs.openstack.org/mitaka/config-reference/block-storage/drivers/ibm-storwize-svc-driver.html This PS will allow to run these additional drivers when using Kolla. Implements: blueprint multipath-support Change-Id: Id6cf29f984c92773bbfc2f95daea573a74701648
2016-07-08 13:34:04 -03:00
- hosts:
- multipathd
Optimized the serial upgrade and reconfigure * add serial for reconfigure * set playbook serial by using variable * fix serial for barbican, influxdb and vmtp Closes-Bug: #1624607 Change-Id: I66530c7736e1673a592eddbde75637825d12d9e2
2016-09-17 10:31:36 +08:00
serial: '{{ serial|default("0") }}'
Add multipathing support to docker container Due some cinder drivers need multipathing support like this one http://docs.openstack.org/mitaka/config-reference/block-storage/drivers/ibm-storwize-svc-driver.html This PS will allow to run these additional drivers when using Kolla. Implements: blueprint multipath-support Change-Id: Id6cf29f984c92773bbfc2f95daea573a74701648
2016-07-08 13:34:04 -03:00
roles:
- { role: multipathd,
tags: multipathd,
when: enable_multipathd | bool }
Rename role name to service name The original purpose for having an abstract like 'database' rather than the service name of 'mariadb' has been change. Our direction is different and this patch reflects consistent naming throughout Change-Id: I704896191cc5243f9dab2a4cca9120e9dc2ceb2c Closes-Bug: #1478328
2015-07-26 10:39:07 +00:00
- hosts: rabbitmq
Initial commit for adding ansible support This adds a very basic structure to begin supporting ansible in Kolla. Ansible can support complete idempotency, but wrapping docker-compose does not allow idempotency at this time. These playbooks will be extended to compensate for that in future patches. Change-Id: I1c9e8d32321e2733f5a9b752edf74b4fe90317ed
2015-03-28 17:16:24 -05:00
roles:
Small refactor for site.yml As the bug mentions this file is complex and has caused problems in the past. It will likely cause problems in the future. Change-Id: I28db6a38406ce0dd38340319eea7ef9134682007 Closes-Bug: #1512582
2015-11-03 05:47:47 +00:00
- { role: rabbitmq,
tags: rabbitmq,
when: enable_rabbitmq | bool }
Add auth role to ansible Add a auth role so ansible can deploy keystone. Change-Id: I3f41fe150654451aae6271cce59ddeb807945043
2015-05-02 22:45:36 +08:00
Add etcd ansible role Change-Id: If8351ab3000006323a05924e907f1e3745768304 Co-Authored-By: zhubingbing <zhubingbing10@gmail.com>> Partially-implements: bp kuryr-docker-plugin
2016-09-02 00:48:01 -04:00
- hosts: etcd
Optimized the serial upgrade and reconfigure * add serial for reconfigure * set playbook serial by using variable * fix serial for barbican, influxdb and vmtp Closes-Bug: #1624607 Change-Id: I66530c7736e1673a592eddbde75637825d12d9e2
2016-09-17 10:31:36 +08:00
serial: '{{ serial|default("0") }}'
Add etcd ansible role Change-Id: If8351ab3000006323a05924e907f1e3745768304 Co-Authored-By: zhubingbing <zhubingbing10@gmail.com>> Partially-implements: bp kuryr-docker-plugin
2016-09-02 00:48:01 -04:00
roles:
- { role: etcd,
tags: etcd,
when: enable_etcd | bool }
Add memcached_servers to keystone_auth section The in-process cache for keystone tokens has been deprecated due to "incosistent results and high memory usage" with the expectation we switch to memcached_servers if we want to stay performant. Add memcache_servers [cache] section to the appropriate servers as the [DEFAULT]\memcache_servers options was deprecated. TrivialFix Related-Id: Ied2b88c8cefe5655a88d0c2f334de04e588fa75a Change-Id: Ic971bdddc0be3338b15924f7cc0f97d4a3ad2440
2016-03-19 16:42:26 +00:00
- hosts:
- keystone
Optimized the serial upgrade and reconfigure * add serial for reconfigure * set playbook serial by using variable * fix serial for barbican, influxdb and vmtp Closes-Bug: #1624607 Change-Id: I66530c7736e1673a592eddbde75637825d12d9e2
2016-09-17 10:31:36 +08:00
serial: '{{ serial|default("0") }}'
Add auth role to ansible Add a auth role so ansible can deploy keystone. Change-Id: I3f41fe150654451aae6271cce59ddeb807945043
2015-05-02 22:45:36 +08:00
roles:
Small refactor for site.yml As the bug mentions this file is complex and has caused problems in the past. It will likely cause problems in the future. Change-Id: I28db6a38406ce0dd38340319eea7ef9134682007 Closes-Bug: #1512582
2015-11-03 05:47:47 +00:00
- { role: keystone,
tags: keystone,
when: enable_keystone | bool }
Ansible Glance support Adds support for glance in ansible Partially-Implements: blueprint ansible-service Change-Id: I2d162e79f85877116b0e33b1843de6ccb62a445a
2015-07-04 12:47:45 +00:00
Small refactor for site.yml As the bug mentions this file is complex and has caused problems in the past. It will likely cause problems in the future. Change-Id: I28db6a38406ce0dd38340319eea7ef9134682007 Closes-Bug: #1512582
2015-11-03 05:47:47 +00:00
- hosts:
Remove vip for rabbitmq Adjust all the configs to list all the rabbitmq hosts rather than running rabbitmq through the VIP. This is made possible by clusterer which has already merged. Change-Id: I5db48f5f10ec68f4c8863a29bc13984f6845a4f9 Partially-Implements: blueprint rabbitmq-clusterer
2015-10-16 07:58:34 +00:00
- swift-account-server
- swift-container-server
- swift-object-server
- swift-proxy-server
Optimized the serial upgrade and reconfigure * add serial for reconfigure * set playbook serial by using variable * fix serial for barbican, influxdb and vmtp Closes-Bug: #1624607 Change-Id: I66530c7736e1673a592eddbde75637825d12d9e2
2016-09-17 10:31:36 +08:00
serial: '{{ serial|default("0") }}'
Implement Ansible role for Swift This currently deploys the core services for a working Swift which are account/container/object/proxy. I've included some basic docs in docs/swift-related.rst, which gives usage instructions and more context on this patch. These are really to give an overview of the state of Swift in Kolla as of now, so unless there's some major inaccuracy there please don't nitpick it. Change-Id: Id0c54be3e24c46459c40b16b7020f05bddbe1b19 Implements: blueprint ansible-swift
2015-08-18 14:05:54 +00:00
roles:
Small refactor for site.yml As the bug mentions this file is complex and has caused problems in the past. It will likely cause problems in the future. Change-Id: I28db6a38406ce0dd38340319eea7ef9134682007 Closes-Bug: #1512582
2015-11-03 05:47:47 +00:00
- { role: swift,
tags: swift,
when: enable_swift | bool }
Implement Ansible role for Swift This currently deploys the core services for a working Swift which are account/container/object/proxy. I've included some basic docs in docs/swift-related.rst, which gives usage instructions and more context on this patch. These are really to give an overview of the state of Swift in Kolla as of now, so unless there's some major inaccuracy there please don't nitpick it. Change-Id: Id0c54be3e24c46459c40b16b7020f05bddbe1b19 Implements: blueprint ansible-swift
2015-08-18 14:05:54 +00:00
Small refactor for site.yml As the bug mentions this file is complex and has caused problems in the past. It will likely cause problems in the future. Change-Id: I28db6a38406ce0dd38340319eea7ef9134682007 Closes-Bug: #1512582
2015-11-03 05:47:47 +00:00
- hosts:
- ceph-mon
- glance-api
- glance-registry
Optimized the serial upgrade and reconfigure * add serial for reconfigure * set playbook serial by using variable * fix serial for barbican, influxdb and vmtp Closes-Bug: #1624607 Change-Id: I66530c7736e1673a592eddbde75637825d12d9e2
2016-09-17 10:31:36 +08:00
serial: '{{ serial|default("0") }}'
Ansible Glance support Adds support for glance in ansible Partially-Implements: blueprint ansible-service Change-Id: I2d162e79f85877116b0e33b1843de6ccb62a445a
2015-07-04 12:47:45 +00:00
roles:
Small refactor for site.yml As the bug mentions this file is complex and has caused problems in the past. It will likely cause problems in the future. Change-Id: I28db6a38406ce0dd38340319eea7ef9134682007 Closes-Bug: #1512582
2015-11-03 05:47:47 +00:00
- { role: glance,
tags: glance,
when: enable_glance | bool }
Ansible Nova w/ libvirt support Initial support for Nova in Ansible Partially-Implements: blueprint ansible-service Change-Id: I4b0a74bd3e5daa5664f5e1e622bfb40c3285949e
2015-07-12 03:02:33 +00:00
Ironic should be started before nova-ironic-compute nova-ironic-compute will try to connect ironic-api service. So ironic should be started first. TrivialFix Change-Id: I23ba5724d86e3b7a06f7f7d112ee1ac84a2cda03
2016-10-18 10:58:48 +08:00
- hosts:
- ironic-api
- ironic-conductor
- ironic-inspector
- ironic-pxe
serial: '{{ serial|default("0") }}'
roles:
- { role: ironic,
tags: ironic,
when: enable_ironic | bool }
Small refactor for site.yml As the bug mentions this file is complex and has caused problems in the past. It will likely cause problems in the future. Change-Id: I28db6a38406ce0dd38340319eea7ef9134682007 Closes-Bug: #1512582
2015-11-03 05:47:47 +00:00
- hosts:
- ceph-mon
- compute
- nova-api
- nova-conductor
- nova-consoleauth
- nova-novncproxy
- nova-scheduler
Optimized the serial upgrade and reconfigure * add serial for reconfigure * set playbook serial by using variable * fix serial for barbican, influxdb and vmtp Closes-Bug: #1624607 Change-Id: I66530c7736e1673a592eddbde75637825d12d9e2
2016-09-17 10:31:36 +08:00
serial: '{{ serial|default("0") }}'
Ansible Nova w/ libvirt support Initial support for Nova in Ansible Partially-Implements: blueprint ansible-service Change-Id: I4b0a74bd3e5daa5664f5e1e622bfb40c3285949e
2015-07-12 03:02:33 +00:00
roles:
Small refactor for site.yml As the bug mentions this file is complex and has caused problems in the past. It will likely cause problems in the future. Change-Id: I28db6a38406ce0dd38340319eea7ef9134682007 Closes-Bug: #1512582
2015-11-03 05:47:47 +00:00
- { role: nova,
tags: nova,
when: enable_nova | bool }
Ansible Neutron support Add initial Ansible support for Neutron Change-Id: Idad011945bff914535d1ac0eb09cc9d3b0882fbe Partially-Implements: blueprint ansible-service
2015-07-13 07:32:29 +00:00
Add Kuryr ansible role Change-Id: I7134bffab940ee780e5f5010d639af56f97b41d6 Co-authored-by: Mohammad Banikazemi <mb@us.ibm.com> Co-Authored-By: zhubingbing <zhubingbing10@gmail.com> Co-Authored-By: Antoni Segura Puimedon <antonisp@celebdor.com> Partially-implements: bp kuryr-docker-plugin
2016-03-29 13:25:43 -04:00
- hosts:
- compute
roles:
- { role: kuryr,
tags: kuryr,
when: enable_kuryr | bool }
Add comments on site.yml neutron hosts reordering TrivialFix Change-Id: Ia5ee3a836f35c4223f9149574cbdd29b8a61af84
2016-04-01 13:55:14 -07:00
# (gmmaha): Please do not change the order listed here. The current order is a
# workaround to fix the bug https://bugs.launchpad.net/kolla/+bug/1546789
Small refactor for site.yml As the bug mentions this file is complex and has caused problems in the past. It will likely cause problems in the future. Change-Id: I28db6a38406ce0dd38340319eea7ef9134682007 Closes-Bug: #1512582
2015-11-03 05:47:47 +00:00
- hosts:
Workaround ansible bug related to delegate_to Currently the delegate_to doesnt happen and the neutron role creation is attempted once on the first server and is skipped. The re-ordering of hosts in site.yml seems to make the first host to be one inside neutron-server group yielding the expected results. This patch needs to be re-visited as soon as a version of ansible is chosen that fixes the issues with delegate_to Co-Authored-By: Steven Dake <stdake@cisco.com> Co-Authored-By: Vikram Hosakote <vhosakot@cisco.com> Co-Authored-By: Nate Potter <nathaniel.potter@intel.com> Co-Authored-By: Ganesh Mahalingam <ganesh.mahalingam@intel.com> Change-Id: Ia712b323aa9d750d470a11ee899ab1b3054a903f Partial-Bug: #1546789
2016-03-31 04:04:27 -04:00
- neutron-server
Convert Neutron to thin containers *** Requires Docker 1.10 which is released *** Documentation will be in the next patch. You must set the following in your docker.service daemon control file for propogation to work: [Service] MountFlags=shared ====================================================================== Thanks to mount propagation in Docker 1.10 we can use thin containers finally! This is extremely useful to operators since now they can access the network namespaces from the hosts (outside the neutron container). But additionally it allows us to implement the VPN agent and other services easier. Neutron containers and the neutron role are brought into the standards of the new Kolla. Completely with drop-root and ansible formating updates. The ip_wrapper.py script was (thankfully) not needed so it has been removed from the repo. Partially-Implements: blueprint upgrade-neutron Change-Id: Iaf5555283240457e1912459f397a6393d886fba1
2016-01-26 19:50:43 +00:00
- neutron-dhcp-agent
- neutron-l3-agent
Adds Neutron LBaaS Support Previously, kolla did not support neutron lbaas functionality. Only Lbaasv2 is supported in Mitaka. Additional information can be found here: http://docs.openstack.org/mitaka/networking-guide/adv-config-lbaas.html Magnum uses Neutron Lbaas to provide high availability to COE API and Etcd endpoints within a bay. Therefore, Neutron Lbaas is required for Kolla to support Magnum. Co-Authored-By: Serguei Bezverkhi <sbezverk@cisco.com> Partial-Bug: #1551992 Change-Id: I05360b7c447c601fcb3c2b6b2a913ef5cc0f3a1b
2016-05-10 20:26:58 +00:00
- neutron-lbaas-agent
Convert Neutron to thin containers *** Requires Docker 1.10 which is released *** Documentation will be in the next patch. You must set the following in your docker.service daemon control file for propogation to work: [Service] MountFlags=shared ====================================================================== Thanks to mount propagation in Docker 1.10 we can use thin containers finally! This is extremely useful to operators since now they can access the network namespaces from the hosts (outside the neutron container). But additionally it allows us to implement the VPN agent and other services easier. Neutron containers and the neutron role are brought into the standards of the new Kolla. Completely with drop-root and ansible formating updates. The ip_wrapper.py script was (thankfully) not needed so it has been removed from the repo. Partially-Implements: blueprint upgrade-neutron Change-Id: Iaf5555283240457e1912459f397a6393d886fba1
2016-01-26 19:50:43 +00:00
- neutron-metadata-agent
Integrate neutron-vpnaas-agent into the neutron Ansible role Implements: blueprint neutron-vpnaas-agent Co-Authored-By: zhubingbing <zhubingbing10@gmail.com> Change-Id: I1fae21f48d5beef47934aef7c23910536955f2b8
2016-06-29 15:34:18 +02:00
- neutron-vpnaas-agent
Workaround ansible bug related to delegate_to Currently the delegate_to doesnt happen and the neutron role creation is attempted once on the first server and is skipped. The re-ordering of hosts in site.yml seems to make the first host to be one inside neutron-server group yielding the expected results. This patch needs to be re-visited as soon as a version of ansible is chosen that fixes the issues with delegate_to Co-Authored-By: Steven Dake <stdake@cisco.com> Co-Authored-By: Vikram Hosakote <vhosakot@cisco.com> Co-Authored-By: Nate Potter <nathaniel.potter@intel.com> Co-Authored-By: Ganesh Mahalingam <ganesh.mahalingam@intel.com> Change-Id: Ia712b323aa9d750d470a11ee899ab1b3054a903f Partial-Bug: #1546789
2016-03-31 04:04:27 -04:00
- compute
- manila-share
Optimized the serial upgrade and reconfigure * add serial for reconfigure * set playbook serial by using variable * fix serial for barbican, influxdb and vmtp Closes-Bug: #1624607 Change-Id: I66530c7736e1673a592eddbde75637825d12d9e2
2016-09-17 10:31:36 +08:00
serial: '{{ serial|default("0") }}'
Ansible Neutron support Add initial Ansible support for Neutron Change-Id: Idad011945bff914535d1ac0eb09cc9d3b0882fbe Partially-Implements: blueprint ansible-service
2015-07-13 07:32:29 +00:00
roles:
Small refactor for site.yml As the bug mentions this file is complex and has caused problems in the past. It will likely cause problems in the future. Change-Id: I28db6a38406ce0dd38340319eea7ef9134682007 Closes-Bug: #1512582
2015-11-03 05:47:47 +00:00
- { role: neutron,
tags: neutron,
when: enable_neutron | bool }
Add ansible support for Cinder Change-Id: I0694e5ad95aa7f924ebd3a29dff1f85e6307b7ae Partially-implements: blueprint ansible-cinder Partially-Implements: blueprint remove-abstraction-ansible Co-Authored-By: Ryan Hallisey <rhallise@redhat.com>
2015-08-04 07:39:22 +00:00
Small refactor for site.yml As the bug mentions this file is complex and has caused problems in the past. It will likely cause problems in the future. Change-Id: I28db6a38406ce0dd38340319eea7ef9134682007 Closes-Bug: #1512582
2015-11-03 05:47:47 +00:00
- hosts:
- ceph-mon
- cinder-api
- cinder-backup
- cinder-scheduler
- cinder-volume
Optimized the serial upgrade and reconfigure * add serial for reconfigure * set playbook serial by using variable * fix serial for barbican, influxdb and vmtp Closes-Bug: #1624607 Change-Id: I66530c7736e1673a592eddbde75637825d12d9e2
2016-09-17 10:31:36 +08:00
serial: '{{ serial|default("0") }}'
Add ansible support for Cinder Change-Id: I0694e5ad95aa7f924ebd3a29dff1f85e6307b7ae Partially-implements: blueprint ansible-cinder Partially-Implements: blueprint remove-abstraction-ansible Co-Authored-By: Ryan Hallisey <rhallise@redhat.com>
2015-08-04 07:39:22 +00:00
roles:
Small refactor for site.yml As the bug mentions this file is complex and has caused problems in the past. It will likely cause problems in the future. Change-Id: I28db6a38406ce0dd38340319eea7ef9134682007 Closes-Bug: #1512582
2015-11-03 05:47:47 +00:00
- { role: cinder,
tags: cinder,
when: enable_cinder | bool }
Add ansible support for Horizon Change-Id: I6189ebd0151207b2e9807f1174c1f3eb4719d90a Implements: blueprint ansible-horizon Co-Authored-By: Harm Weites <harm@weites.com> Co-Authored-By: Sam Yaple <sam@yaple.net>
2015-08-10 14:08:59 -04:00
Small refactor for site.yml As the bug mentions this file is complex and has caused problems in the past. It will likely cause problems in the future. Change-Id: I28db6a38406ce0dd38340319eea7ef9134682007 Closes-Bug: #1512582
2015-11-03 05:47:47 +00:00
- hosts:
- heat-api
- heat-api-cfn
- heat-engine
Optimized the serial upgrade and reconfigure * add serial for reconfigure * set playbook serial by using variable * fix serial for barbican, influxdb and vmtp Closes-Bug: #1624607 Change-Id: I66530c7736e1673a592eddbde75637825d12d9e2
2016-09-17 10:31:36 +08:00
serial: '{{ serial|default("0") }}'
Add Ansible support for Heat This changes bootstrapping of the Heat container to bootstrap the Heat container with a heat domain user. This requires some work from bootstrap.yml to pass in several environment variables needed by the heat domain setup script. Co-Authored-By: Sam Yaple <sam@yaple.net> Change-Id: Iab05983754fa514835cb5ff54d775faa18773110 Partially-implements: blueprint ansible-heat
2015-08-02 12:26:30 -07:00
roles:
Small refactor for site.yml As the bug mentions this file is complex and has caused problems in the past. It will likely cause problems in the future. Change-Id: I28db6a38406ce0dd38340319eea7ef9134682007 Closes-Bug: #1512582
2015-11-03 05:47:47 +00:00
- { role: heat,
tags: heat,
when: enable_heat | bool }
Add Ansible support for Heat This changes bootstrapping of the Heat container to bootstrap the Heat container with a heat domain user. This requires some work from bootstrap.yml to pass in several environment variables needed by the heat domain setup script. Co-Authored-By: Sam Yaple <sam@yaple.net> Change-Id: Iab05983754fa514835cb5ff54d775faa18773110 Partially-implements: blueprint ansible-heat
2015-08-02 12:26:30 -07:00
Add memcached_servers to keystone_auth section The in-process cache for keystone tokens has been deprecated due to "incosistent results and high memory usage" with the expectation we switch to memcached_servers if we want to stay performant. Add memcache_servers [cache] section to the appropriate servers as the [DEFAULT]\memcache_servers options was deprecated. TrivialFix Related-Id: Ied2b88c8cefe5655a88d0c2f334de04e588fa75a Change-Id: Ic971bdddc0be3338b15924f7cc0f97d4a3ad2440
2016-03-19 16:42:26 +00:00
- hosts:
- horizon
Optimized the serial upgrade and reconfigure * add serial for reconfigure * set playbook serial by using variable * fix serial for barbican, influxdb and vmtp Closes-Bug: #1624607 Change-Id: I66530c7736e1673a592eddbde75637825d12d9e2
2016-09-17 10:31:36 +08:00
serial: '{{ serial|default("0") }}'
Add ansible support for Horizon Change-Id: I6189ebd0151207b2e9807f1174c1f3eb4719d90a Implements: blueprint ansible-horizon Co-Authored-By: Harm Weites <harm@weites.com> Co-Authored-By: Sam Yaple <sam@yaple.net>
2015-08-10 14:08:59 -04:00
roles:
Small refactor for site.yml As the bug mentions this file is complex and has caused problems in the past. It will likely cause problems in the future. Change-Id: I28db6a38406ce0dd38340319eea7ef9134682007 Closes-Bug: #1512582
2015-11-03 05:47:47 +00:00
- { role: horizon,
tags: horizon,
when: enable_horizon | bool }
Add ansible support for Murano Deploy the core services for murano-api and murano-engine containers. Implements: bp ansible-murano Change-Id: Ibcc618665a3509465ba8f9249a417e8848087eef
2015-08-28 10:49:29 +01:00
Small refactor for site.yml As the bug mentions this file is complex and has caused problems in the past. It will likely cause problems in the future. Change-Id: I28db6a38406ce0dd38340319eea7ef9134682007 Closes-Bug: #1512582
2015-11-03 05:47:47 +00:00
- hosts:
- murano-api
- murano-engine
Optimized the serial upgrade and reconfigure * add serial for reconfigure * set playbook serial by using variable * fix serial for barbican, influxdb and vmtp Closes-Bug: #1624607 Change-Id: I66530c7736e1673a592eddbde75637825d12d9e2
2016-09-17 10:31:36 +08:00
serial: '{{ serial|default("0") }}'
Add ansible support for Murano Deploy the core services for murano-api and murano-engine containers. Implements: bp ansible-murano Change-Id: Ibcc618665a3509465ba8f9249a417e8848087eef
2015-08-28 10:49:29 +01:00
roles:
Small refactor for site.yml As the bug mentions this file is complex and has caused problems in the past. It will likely cause problems in the future. Change-Id: I28db6a38406ce0dd38340319eea7ef9134682007 Closes-Bug: #1512582
2015-11-03 05:47:47 +00:00
- { role: murano,
tags: murano,
when: enable_murano | bool }
Add Ansible support for Ironic Configuration based off upstream documentation here: http://docs.openstack.org/developer/ironic/deploy/install-guide.html A few notes: -ironic-api is not configured to use mod_wsgi -several places it's noted that discoverd is going away and needs to be replaced with ironic-inspector - (sqlite connection should be changed too) -currently enabling ironic reconfigures nova compute (driver and scheduler) as well as changes neutron network settings -a nice enhancement would be to configure the web console Required post-deployment configuration: Create the flat network to launch the instances: neutron net-create --tenant-id $TENANT_ID sharednet1 --shared \ --provider:network_type flat --provider:physical_network physnet1 neutron subnet-create sharednet1 $NETWORK_CIDR --name $SUBNET_NAME \ --ip-version=4 --gateway=$GATEWAY_IP --allocation-pool \ start=$START_IP,end=$END_IP --enable-dhcp And then the above ID is used to set cleaning_network_uuid in the neutron section of ironic.conf. Change-Id: I572e7ff1f23c4e57a2c50817cafe9269fd9950dd Implements: blueprint ironic-container
2015-08-28 11:26:40 -04:00
Add Ansible support for Magnum Change-Id: Idb25ac4d3148c9b9400cf675ac2e47d35cce6224 Implements: blueprint ansible-magnum
2015-10-17 18:13:51 +02:00
- hosts:
- magnum-api
- magnum-conductor
Optimized the serial upgrade and reconfigure * add serial for reconfigure * set playbook serial by using variable * fix serial for barbican, influxdb and vmtp Closes-Bug: #1624607 Change-Id: I66530c7736e1673a592eddbde75637825d12d9e2
2016-09-17 10:31:36 +08:00
serial: '{{ serial|default("0") }}'
Add Ansible support for Magnum Change-Id: Idb25ac4d3148c9b9400cf675ac2e47d35cce6224 Implements: blueprint ansible-magnum
2015-10-17 18:13:51 +02:00
roles:
- { role: magnum,
tags: magnum,
when: enable_magnum | bool }
Ansible files for mistral containers. Change-Id: Ifb55ff4a7ca70bc3d10fbb2ec067c245342d3288 Partially-implements: blueprint enable-mistral-container
2015-12-28 08:38:30 +09:00
- hosts:
- mistral-api
- mistral-engine
- mistral-executor
Optimized the serial upgrade and reconfigure * add serial for reconfigure * set playbook serial by using variable * fix serial for barbican, influxdb and vmtp Closes-Bug: #1624607 Change-Id: I66530c7736e1673a592eddbde75637825d12d9e2
2016-09-17 10:31:36 +08:00
serial: '{{ serial|default("0") }}'
Ansible files for mistral containers. Change-Id: Ifb55ff4a7ca70bc3d10fbb2ec067c245342d3288 Partially-implements: blueprint enable-mistral-container
2015-12-28 08:38:30 +09:00
roles:
- { role: mistral,
tags: mistral,
when: enable_mistral | bool }
Add an ansible role for mongodb Change-Id: Ia6ac371845d1f2b545406d096b35a6d5f68be5f6 Implements: blueprint ansible-mongodb
2016-01-18 21:00:45 +00:00
Add sahara ansible role Change-Id: I75b58248bfc4e86cace75faa82526d55a9ebbdbf Partially-Implements: blueprint sahara-role
2016-08-04 17:20:20 +00:00
- hosts:
- sahara-api
- sahara-engine
Optimized the serial upgrade and reconfigure * add serial for reconfigure * set playbook serial by using variable * fix serial for barbican, influxdb and vmtp Closes-Bug: #1624607 Change-Id: I66530c7736e1673a592eddbde75637825d12d9e2
2016-09-17 10:31:36 +08:00
serial: '{{ serial|default("0") }}'
Add sahara ansible role Change-Id: I75b58248bfc4e86cace75faa82526d55a9ebbdbf Partially-Implements: blueprint sahara-role
2016-08-04 17:20:20 +00:00
roles:
- { role: sahara,
tags: sahara,
when: enable_sahara | bool }
Add an ansible role for mongodb Change-Id: Ia6ac371845d1f2b545406d096b35a6d5f68be5f6 Implements: blueprint ansible-mongodb
2016-01-18 21:00:45 +00:00
- hosts:
- mongodb
Optimized the serial upgrade and reconfigure * add serial for reconfigure * set playbook serial by using variable * fix serial for barbican, influxdb and vmtp Closes-Bug: #1624607 Change-Id: I66530c7736e1673a592eddbde75637825d12d9e2
2016-09-17 10:31:36 +08:00
serial: '{{ serial|default("0") }}'
Add an ansible role for mongodb Change-Id: Ia6ac371845d1f2b545406d096b35a6d5f68be5f6 Implements: blueprint ansible-mongodb
2016-01-18 21:00:45 +00:00
roles:
- { role: mongodb,
tags: mongodb,
when: enable_mongodb | bool }
Add ansible support for Manila Co-Authored-By: Marc Koderer <marc@koderer.com> Change-Id: I16bab281f2eca341b7a649f766bae5f2cf18a117 Partially-Implements: blueprint enable-manila-containers
2016-03-01 10:46:48 -05:00
- hosts:
- manila-api
Add manila-data service Change-Id: Ie82f1dd7773ef2cc2c6724ec0b5f78ebd79566ee Closes-Bug: #1635370
2016-10-20 17:19:47 -03:00
- manila-data
Add ansible support for Manila Co-Authored-By: Marc Koderer <marc@koderer.com> Change-Id: I16bab281f2eca341b7a649f766bae5f2cf18a117 Partially-Implements: blueprint enable-manila-containers
2016-03-01 10:46:48 -05:00
- manila-share
- manila-scheduler
Optimized the serial upgrade and reconfigure * add serial for reconfigure * set playbook serial by using variable * fix serial for barbican, influxdb and vmtp Closes-Bug: #1624607 Change-Id: I66530c7736e1673a592eddbde75637825d12d9e2
2016-09-17 10:31:36 +08:00
serial: '{{ serial|default("0") }}'
Add ansible support for Manila Co-Authored-By: Marc Koderer <marc@koderer.com> Change-Id: I16bab281f2eca341b7a649f766bae5f2cf18a117 Partially-Implements: blueprint enable-manila-containers
2016-03-01 10:46:48 -05:00
roles:
- { role: manila,
tags: manila,
when: enable_manila | bool }
Implement ceilometer ansible role Change-Id: I13c50a78b2dc7c98b720a4b2e7161104213bd295 Implements: bp ansible-ceilometer
2016-03-29 13:25:43 -04:00
Add gnocchi ansible role Partially-Implements: blueprint ansible-gnocchi Change-Id: I8dd0460bd21ac0a233fab0142ec7b6079459bdc2
2016-08-01 05:17:43 +00:00
- hosts:
- gnocchi-api
- gnocchi-metricd
- gnocchi-statsd
Optimized the serial upgrade and reconfigure * add serial for reconfigure * set playbook serial by using variable * fix serial for barbican, influxdb and vmtp Closes-Bug: #1624607 Change-Id: I66530c7736e1673a592eddbde75637825d12d9e2
2016-09-17 10:31:36 +08:00
serial: '{{ serial|default("0") }}'
Add gnocchi ansible role Partially-Implements: blueprint ansible-gnocchi Change-Id: I8dd0460bd21ac0a233fab0142ec7b6079459bdc2
2016-08-01 05:17:43 +00:00
roles:
- { role: gnocchi,
tags: gnocchi,
when: enable_gnocchi | bool }
Implement ceilometer ansible role Change-Id: I13c50a78b2dc7c98b720a4b2e7161104213bd295 Implements: bp ansible-ceilometer
2016-03-29 13:25:43 -04:00
- hosts:
- ceilometer
- compute
Optimized the serial upgrade and reconfigure * add serial for reconfigure * set playbook serial by using variable * fix serial for barbican, influxdb and vmtp Closes-Bug: #1624607 Change-Id: I66530c7736e1673a592eddbde75637825d12d9e2
2016-09-17 10:31:36 +08:00
serial: '{{ serial|default("0") }}'
Implement ceilometer ansible role Change-Id: I13c50a78b2dc7c98b720a4b2e7161104213bd295 Implements: bp ansible-ceilometer
2016-03-29 13:25:43 -04:00
roles:
- { role: ceilometer,
tags: ceilometer,
when: enable_ceilometer | bool }
implement Ansible Tempest role DocImpact Implments: blueprint ansible-tempest Change-Id: Iadd86d9d91438f056c433b9a2016f32587c92878
2016-05-26 20:58:03 +08:00
Add aodh role Partially-Implements: blueprint ansible-aodh Change-Id: I9e20f4bf5e7d8f37f243ae15746e2b7bb49eb20c
2016-08-04 06:51:11 +00:00
- hosts:
- aodh
Optimized the serial upgrade and reconfigure * add serial for reconfigure * set playbook serial by using variable * fix serial for barbican, influxdb and vmtp Closes-Bug: #1624607 Change-Id: I66530c7736e1673a592eddbde75637825d12d9e2
2016-09-17 10:31:36 +08:00
serial: '{{ serial|default("0") }}'
Add aodh role Partially-Implements: blueprint ansible-aodh Change-Id: I9e20f4bf5e7d8f37f243ae15746e2b7bb49eb20c
2016-08-04 06:51:11 +00:00
roles:
- { role: aodh,
tags: aodh,
when: enable_aodh | bool }
Add Barbican ansible role Partially-Implements: blueprint barbican-ansible Change-Id: Id6be35b1d0527d5c38d4ea8576b233ebcc404718
2016-08-08 16:48:11 +00:00
- hosts:
- barbican-api
- barbican-keystone-listener
- barbican-worker
Optimized the serial upgrade and reconfigure * add serial for reconfigure * set playbook serial by using variable * fix serial for barbican, influxdb and vmtp Closes-Bug: #1624607 Change-Id: I66530c7736e1673a592eddbde75637825d12d9e2
2016-09-17 10:31:36 +08:00
serial: '{{ serial|default("0") }}'
Add Barbican ansible role Partially-Implements: blueprint barbican-ansible Change-Id: Id6be35b1d0527d5c38d4ea8576b233ebcc404718
2016-08-08 16:48:11 +00:00
roles:
- { role: barbican,
tags: barbican,
when: enable_barbican | bool }
Added Ansible playbook for congress deploy Change-Id: Id04fe7a8f30ed0dae292933662036f4775e394a2 Partially-Implements: blueprint enable-congress-container
2016-08-17 10:09:42 +00:00
- hosts:
- congress-api
- congress-policy-engine
- congress-datasource
Optimized the serial upgrade and reconfigure * add serial for reconfigure * set playbook serial by using variable * fix serial for barbican, influxdb and vmtp Closes-Bug: #1624607 Change-Id: I66530c7736e1673a592eddbde75637825d12d9e2
2016-09-17 10:31:36 +08:00
serial: '{{ serial|default("0") }}'
Added Ansible playbook for congress deploy Change-Id: Id04fe7a8f30ed0dae292933662036f4775e394a2 Partially-Implements: blueprint enable-congress-container
2016-08-17 10:09:42 +00:00
roles:
- { role: congress,
tags: congress,
when: enable_congress | bool }
implement Ansible Tempest role DocImpact Implments: blueprint ansible-tempest Change-Id: Iadd86d9d91438f056c433b9a2016f32587c92878
2016-05-26 20:58:03 +08:00
- hosts:
- tempest
Optimized the serial upgrade and reconfigure * add serial for reconfigure * set playbook serial by using variable * fix serial for barbican, influxdb and vmtp Closes-Bug: #1624607 Change-Id: I66530c7736e1673a592eddbde75637825d12d9e2
2016-09-17 10:31:36 +08:00
serial: '{{ serial|default("0") }}'
implement Ansible Tempest role DocImpact Implments: blueprint ansible-tempest Change-Id: Iadd86d9d91438f056c433b9a2016f32587c92878
2016-05-26 20:58:03 +08:00
roles:
- { role: tempest,
tags: tempest,
when: enable_tempest | bool }
Add Watcher ansible roles and templates Previous work on Watcher added the Docker images, this change adds the ansible configuration. There is support for HA, via haproxy to balance across the Watcher API hosts. There is also a hook into nova.conf to conditionally add Nova compute Host metrics via Ceilometer if Watcher is enabled. This defaults to enabled false. Change-Id: I8763528bb6ff12943b810212c71396d2d7cf6836 Partial-bug: #1598929 Partially-implements: bp watcher Signed-off-by: Dave Walker (Daviey) <email@daviey.com>
2016-07-05 09:47:21 +01:00
Implement Ansible rally role Change-Id: I647c38adbfd00c70874cf51c0bfcb68d243e26cc Partially-Implements: blueprint rally-role
2016-08-31 07:46:41 +00:00
- hosts: rally
Optimized the serial upgrade and reconfigure * add serial for reconfigure * set playbook serial by using variable * fix serial for barbican, influxdb and vmtp Closes-Bug: #1624607 Change-Id: I66530c7736e1673a592eddbde75637825d12d9e2
2016-09-17 10:31:36 +08:00
serial: '{{ serial|default("0") }}'
Implement Ansible rally role Change-Id: I647c38adbfd00c70874cf51c0bfcb68d243e26cc Partially-Implements: blueprint rally-role
2016-08-31 07:46:41 +00:00
roles:
- { role: rally,
tags: rally,
when: enable_rally | bool }
Add ansible role for vmtp container Add vmtp ansible role to kolla. Co-Authored-By: Larry Rensing <lr699s@att.com> Co-Authored-By: Tin Lam <tinlam@gmail.com> Partially implements: bp vmtp-container Change-Id: Ib3945e0a94cca9f3a8c4f55953b40674c88ac8e4
2016-08-21 01:01:04 -05:00
- hosts:
- vmtp
Optimized the serial upgrade and reconfigure * add serial for reconfigure * set playbook serial by using variable * fix serial for barbican, influxdb and vmtp Closes-Bug: #1624607 Change-Id: I66530c7736e1673a592eddbde75637825d12d9e2
2016-09-17 10:31:36 +08:00
serial: '{{ serial|default("0") }}'
Add ansible role for vmtp container Add vmtp ansible role to kolla. Co-Authored-By: Larry Rensing <lr699s@att.com> Co-Authored-By: Tin Lam <tinlam@gmail.com> Partially implements: bp vmtp-container Change-Id: Ib3945e0a94cca9f3a8c4f55953b40674c88ac8e4
2016-08-21 01:01:04 -05:00
roles:
- { role: vmtp,
tags: vmtp,
when: enable_vmtp | bool }
Add trove role Add trove enable options and port configuration Add trove groups to ansible inventory Add defaults/main.yml Add bootstrap Ansible task Add config Ansible task Add deploy Ansible task Add pull Ansible task Add register Ansible task Add start Ansible task Add upgrade Ansible task Add reconfigure Ansible task Add templatized json and .conf files for trove Integrate trove with haproxy Reference installation configuration link:http://docs.openstack.org/mitaka/install-guide-rdo/trove-install.html Change-Id: I0bc6edbf2e495ce377f994f793bde979d5c55dbf Implements: blueprint ansible-trove
2016-08-12 18:43:02 +00:00
- hosts:
- trove-api
- trove-conductor
- trove-taskmanager
serial: '{{ serial|default("0") }}'
roles:
- { role: trove,
tags: trove,
when: enable_trove | bool }
Add Watcher ansible roles and templates Previous work on Watcher added the Docker images, this change adds the ansible configuration. There is support for HA, via haproxy to balance across the Watcher API hosts. There is also a hook into nova.conf to conditionally add Nova compute Host metrics via Ceilometer if Watcher is enabled. This defaults to enabled false. Change-Id: I8763528bb6ff12943b810212c71396d2d7cf6836 Partial-bug: #1598929 Partially-implements: bp watcher Signed-off-by: Dave Walker (Daviey) <email@daviey.com>
2016-07-05 09:47:21 +01:00
- hosts:
- watcher-api
- watcher-engine
- watcher-applier
Optimized the serial upgrade and reconfigure * add serial for reconfigure * set playbook serial by using variable * fix serial for barbican, influxdb and vmtp Closes-Bug: #1624607 Change-Id: I66530c7736e1673a592eddbde75637825d12d9e2
2016-09-17 10:31:36 +08:00
serial: '{{ serial|default("0") }}'
Add Watcher ansible roles and templates Previous work on Watcher added the Docker images, this change adds the ansible configuration. There is support for HA, via haproxy to balance across the Watcher API hosts. There is also a hook into nova.conf to conditionally add Nova compute Host metrics via Ceilometer if Watcher is enabled. This defaults to enabled false. Change-Id: I8763528bb6ff12943b810212c71396d2d7cf6836 Partial-bug: #1598929 Partially-implements: bp watcher Signed-off-by: Dave Walker (Daviey) <email@daviey.com>
2016-07-05 09:47:21 +01:00
roles:
- { role: watcher,
tags: watcher,
when: enable_watcher | bool }
Add cloudkitty ansible role Co-Authored-By: zhubingbing <zhubingbing10@gmail.com> Change-Id: Id83c852e32c3dd583e6128e888ac511634e8eabb Partially-Implements: blueprint cloudkitty
2016-08-01 02:27:39 +02:00
Added grafana role Added ansible role to deploy grafana Added host group for grafana deployment Co-Authored-By: zhubingbing <zhubingbing10@gmail.com> Change-Id: I3dec4e8586b6f65fa7de66a48506d1c79de2fe1e Partially-Implements: Blueprint performance-monitoring
2016-07-27 07:02:04 +00:00
- hosts:
- grafana
Optimized the serial upgrade and reconfigure * add serial for reconfigure * set playbook serial by using variable * fix serial for barbican, influxdb and vmtp Closes-Bug: #1624607 Change-Id: I66530c7736e1673a592eddbde75637825d12d9e2
2016-09-17 10:31:36 +08:00
serial: '{{ serial|default("0") }}'
Added grafana role Added ansible role to deploy grafana Added host group for grafana deployment Co-Authored-By: zhubingbing <zhubingbing10@gmail.com> Change-Id: I3dec4e8586b6f65fa7de66a48506d1c79de2fe1e Partially-Implements: Blueprint performance-monitoring
2016-07-27 07:02:04 +00:00
roles:
- { role: grafana,
tags: grafana,
when: enable_grafana | bool }
Add cloudkitty ansible role Co-Authored-By: zhubingbing <zhubingbing10@gmail.com> Change-Id: Id83c852e32c3dd583e6128e888ac511634e8eabb Partially-Implements: blueprint cloudkitty
2016-08-01 02:27:39 +02:00
- hosts:
- cloudkitty-api
- cloudkitty-processor
Optimized the serial upgrade and reconfigure * add serial for reconfigure * set playbook serial by using variable * fix serial for barbican, influxdb and vmtp Closes-Bug: #1624607 Change-Id: I66530c7736e1673a592eddbde75637825d12d9e2
2016-09-17 10:31:36 +08:00
serial: '{{ serial|default("0") }}'
Add cloudkitty ansible role Co-Authored-By: zhubingbing <zhubingbing10@gmail.com> Change-Id: Id83c852e32c3dd583e6128e888ac511634e8eabb Partially-Implements: blueprint cloudkitty
2016-08-01 02:27:39 +02:00
roles:
- { role: cloudkitty,
tags: cloudkitty,
when: enable_cloudkitty | bool }
Add Senlin Ansible role Change-Id: Ic941a396b5cd9abfb5e9941218e91b784f8bba0a Implements: bp senlin-container
2016-07-08 19:12:50 +02:00
- hosts:
- senlin-api
- senlin-engine
Optimized the serial upgrade and reconfigure * add serial for reconfigure * set playbook serial by using variable * fix serial for barbican, influxdb and vmtp Closes-Bug: #1624607 Change-Id: I66530c7736e1673a592eddbde75637825d12d9e2
2016-09-17 10:31:36 +08:00
serial: '{{ serial|default("0") }}'
Add Senlin Ansible role Change-Id: Ic941a396b5cd9abfb5e9941218e91b784f8bba0a Implements: bp senlin-container
2016-07-08 19:12:50 +02:00
roles:
- { role: senlin,
tags: senlin,
when: enable_senlin | bool }
Support searchlight ansible role Searchlight is an Openstack search and index service, this patch implements the ansible role for searchlight. Implement blueprint: support-searchlight-deployment Change-Id: Ibf42d5b259a6740d6596041f896e1009657b7388
2016-10-18 16:36:05 +08:00
- hosts:
- searchlight-api
- searchlight-listener
Add serial for searchlight Change-Id: If83e802fbed98b41f3bc201f0083a4a4ab0852c0 Closes-Bug: #1635678
2016-10-21 14:27:24 -03:00
serial: '{{ serial|default("0") }}'
Support searchlight ansible role Searchlight is an Openstack search and index service, this patch implements the ansible role for searchlight. Implement blueprint: support-searchlight-deployment Change-Id: Ibf42d5b259a6740d6596041f896e1009657b7388
2016-10-18 16:36:05 +08:00
roles:
- { role: searchlight,
tags: searchlight,
when: enable_searchlight | bool }
Copy Permalink