Render {{ openstack_service_workers }} for workers
of each openstack service is not enough. There are
several services which has to have more workers because
there are more requests sent to them.
This patch is just adding default value for workers for
each service and sets {{ openstack_service_workers }} as
default, so value can be overrided in hostvars per server.
Nothing changed for normal user.
Change-Id: Ifa5863f8ec865bbf8e39c9b2add42c92abe40616
Fixes an issue where access rules failed to validate:
Cannot validate request with restricted access rules. Set
service_type in [keystone_authtoken] to allow access rule validation
I've used the values from the endpoint. This was mostly a straight
forward copy and paste, except:
- versioned endpoints e.g cinderv3 where I stripped the version
- monasca has multiple endpoints associated with a single service. For
this, I concatenated logging and monitoring to be logging-monitoring.
Closes-Bug: #1965111
Change-Id: Ic4b3ab60abad8c3dd96cd4923a67f2a8f9d195d7
Following up on [1].
The 3 variables are only introducing noise after we removed
the reliance on Keystone's admin port.
[1] I5099b08953789b280c915a6b7a22bdd4e3404076
Change-Id: I3f9dab93042799eda9174257e604fd1844684c1c
In services which use the Apache HTTP server to service HTTP requests,
there exists a TimeOut directive [1] which defaults to 60 seconds. APIs
which come under heavy load, such as Cinder, can sometimes exceed this
which results in a HTTP 504 Gateway timeout, or similar. However, the
request can still be serviced without error. For example, if Nova calls
the Cinder API to detach a volume, and this operation takes longer
than the shortest of the two timeouts, Nova will emit a stack trace
with a 504 Gateway timeout. At some time later, the request to detach
the volume will succeed. The Nova and Cinder DBs then become
out-of-sync with each other, and frequently DB surgery is required.
Although strictly this category of bugs should be fixed in OpenStack
services, it is not realistic to expect this to happen in the short
term. Therefore, this change makes it easier to set the Apache HTTP
timeout via a new variable.
An example of a related bug is here:
https://bugs.launchpad.net/nova/+bug/1888665
Whilst this timeout can currently be set by overriding the WSGI
config for individual services, this change makes it much easier.
Change-Id: Ie452516655cbd40d63bdad3635fd66693e40ce34
Closes-Bug: #1917648
When the internal VIP is moved in the event of a failure of the active
controller, OpenStack services can become unresponsive as they try to
talk with MariaDB using connections from the SQLAlchemy pool.
It has been argued that OpenStack doesn't really need to use connection
pooling with MariaDB [1]. This commit reduces the use of connection
pooling via two configuration options:
- max_pool_size is set to 1 to allow only a single connection in the
pool (it is not possible to disable connection pooling entirely via
oslo.db, and max_pool_size = 0 means unlimited pool size)
- lower connection_recycle_time from the default of one hour to 10
seconds, which means the single connection in the pool will be
recreated regularly
These settings have shown better reactivity of the system in the event
of a failover.
[1] http://lists.openstack.org/pipermail/openstack-dev/2015-April/061808.html
Change-Id: Ib6a62d4428db9b95569314084090472870417f3d
Closes-Bug: #1896635
It was found to be useless in [1].
It is one of distro_python_version usages.
Note Freezer and Horizon still use python_path (and hence
distro_python_version) for different purposes.
[1] https://review.opendev.org/675822
Change-Id: I6d6d9fdf4c28cb2b686d548955108c994b685bb1
Partially-Implements: blueprint drop-distro-python-version
The goal for this push request is to normalize the construction and use
of internal, external, and admin URLs. While extending Kolla-ansible
to enable a more flexible method to manage external URLs, we noticed
that the same URL was constructed multiple times in different parts
of the code. This can make it difficult for people that want to work
with these URLs and create inconsistencies in a large code base with
time. Therefore, we are proposing here the use of
"single Kolla-ansible variable" per endpoint URL, which facilitates
for people that are interested in overriding/extending these URLs.
As an example, we extended Kolla-ansible to facilitate the "override"
of public (external) URLs with the following standard
"<component/serviceName>.<companyBaseUrl>".
Therefore, the "NAT/redirect" in the SSL termination system (HAproxy,
HTTPD or some other) is done via the service name, and not by the port.
This allows operators to easily and automatically create more friendly
URL names. To develop this feature, we first applied this patch that
we are sending now to the community. We did that to reduce the surface
of changes in Kolla-ansible.
Another example is the integration of Kolla-ansible and Consul, which
we also implemented internally, and also requires URLs changes.
Therefore, this PR is essential to reduce code duplicity, and to
facility users/developers to work/customize the services URLs.
Change-Id: I73d483e01476e779a5155b2e18dd5ea25f514e93
Signed-off-by: Rafael Weingärtner <rafael@apache.org>
This patch introduces a global keep alive timeout value for services
that leverage httpd + wsgi to handle http/https requests. The default
value is one minute.
Change-Id: Icf7cb0baf86b428a60a7e9bbed642999711865cd
Partially-Implements: blueprint add-ssl-internal-network
The value should be the full path to the keyring file, not just the
name. Without this fix Gnocchi fails to connect to Ceph.
Change-Id: Iaa69b2096b09a448345de50911e21436875d48d6
Closes-Bug: #1886711
The removal of Kolla Ceph deploy [1] broke gnocchi & external Ceph
integration - the variable gnocchi_pool_name is referenced in the config
template, but should now be ceph_gnocchi_pool_name.
This change fixes the issue.
Reported by Nick Wilson.
[1] https://review.opendev.org/#/c/704309/12/ansible/roles/gnocchi/defaults/main.yml
Change-Id: I7089781c0c4d7bce8a44cb8b1fca847dd0b7efd1
Closes-Bug: #1877974
The use of default(omit) is for module parameters, not templates. We
define a default value for openstack_cacert, so it should never be
undefined anyway.
Change-Id: Idfa73097ca168c76559dc4f3aa8bb30b7113ab28
This daemon is an additional piece of functionality supported by Gnocchi
and the general pattern in KA is to disable such things unless the user
explicitly wants them. This also helps avoid having to set the
resource_id, user_id, and project_id variables for Gnocchi if you don't
care about this daemon.
Change-Id: I5f14cee4b0bb0d781b1ff53200d11de972d20c82
The old script name was 'python3-gnocchi-api'. It should be
'gnocchi-api' anymore.
Closes-Bug: #1861688
Change-Id: I78fb248859b43dc1636133dadc036028388ab564
Currently the WSGI configuration for binary images uses python2.7
site-packages in some places. This change uses distro_python_version to
select the correct python path.
Change-Id: Id5f3f0ede106498b9264942fa0399d7c7862c122
Partially-Implements: blueprint python-3
To make the configuration easier for the user, and to allow non-standard
ceph authentication ids - introduce ceph_*_user variables.
Change-Id: I24e01c43c826b62b6748d93a498f4b7d8ce9e309
Introduce user modifiable variables instead of fixed-names
of Ceph keyring files for external Ceph functionality.
Change-Id: I1a33b3f9d6eca5babf53b91187461e43aef865ce
Include a reference to the globally configured Certificate Authority to
all services. Services use the CA to verify HTTPs connections.
Change-Id: I38da931cdd7ff46cce1994763b5c713652b096cc
Partially-Implements: blueprint support-trusted-ca-certificate-file
Currently we don't put global Apache error logs into /var/log/kolla,
this change adds statements that redirect those logs there.
Adapted the logfile names to catch into openstack wsgi logging fluentd
input config and existing logrotate cron entries.
Change-Id: I21216e688a1993239e3e81411a4e8b6f13e138c2
Introduce kolla_address filter.
Introduce put_address_in_context filter.
Add AF config to vars.
Address contexts:
- raw (default): <ADDR>
- memcache: inet6:[<ADDR>]
- url: [<ADDR>]
Other changes:
globals.yml - mention just IP in comment
prechecks/port_checks (api_intf) - kolla_address handles validation
3x interface conditional (swift configs: replication/storage)
2x interface variable definition with hostname
(haproxy listens; api intf)
1x interface variable definition with hostname with bifrost exclusion
(baremetal pre-install /etc/hosts; api intf)
neutron's ml2 'overlay_ip_version' set to 6 for IPv6 on tunnel network
basic multinode source CI job for IPv6
prechecks for rabbitmq and qdrouterd use proper NSS database now
MariaDB Galera Cluster WSREP SST mariabackup workaround
(socat and IPv6)
Ceph naming workaround in CI
TODO: probably needs documenting
RabbitMQ IPv6-only proto_dist
Ceph ms switch to IPv6 mode
Remove neutron-server ml2_type_vxlan/vxlan_group setting
as it is not used (let's avoid any confusion)
and could break setups without proper multicast routing
if it started working (also IPv4-only)
haproxy upgrade checks for slaves based on ipv6 addresses
TODO:
ovs-dpdk grabs ipv4 network address (w/ prefix len / submask)
not supported, invalid by default because neutron_external has no address
No idea whether ovs-dpdk works at all atm.
ml2 for xenapi
Xen is not supported too well.
This would require working with XenAPI facts.
rp_filter setting
This would require meddling with ip6tables (there is no sysctl param).
By default nothing is dropped.
Unlikely we really need it.
ironic dnsmasq is configured IPv4-only
dnsmasq needs DHCPv6 options and testing in vivo.
KNOWN ISSUES (beyond us):
One cannot use IPv6 address to reference the image for docker like we
currently do, see: https://github.com/moby/moby/issues/39033
(docker_registry; docker API 400 - invalid reference format)
workaround: use hostname/FQDN
RabbitMQ may fail to bind to IPv6 if hostname resolves also to IPv4.
This is due to old RabbitMQ versions available in images.
IPv4 is preferred by default and may fail in the IPv6-only scenario.
This should be no problem in real life as IPv6-only is indeed IPv6-only.
Also, when new RabbitMQ (3.7.16/3.8+) makes it into images, this will
no longer be relevant as we supply all the necessary config.
See: https://github.com/rabbitmq/rabbitmq-server/pull/1982
For reliable runs, at least Ansible 2.8 is required (2.8.5 confirmed
to work well). Older Ansible versions are known to miss IPv6 addresses
in interface facts. This may affect redeploys, reconfigures and
upgrades which run after VIP address is assigned.
See: https://github.com/ansible/ansible/issues/63227
Bifrost Train does not support IPv6 deployments.
See: https://storyboard.openstack.org/#!/story/2006689
Change-Id: Ia34e6916ea4f99e9522cd2ddde03a0a4776f7e2c
Implements: blueprint ipv6-control-plane
Signed-off-by: Radosław Piliszek <radoslaw.piliszek@gmail.com>
Both ubuntu source and binary install type support python3 now,
python_path should be updated.
Depends-On: https://review.opendev.org/675581
Partially Implements: blueprint python3-support
Change-Id: I4bf721b44220bde2d25d4d985f5ca411699a5a72
For deployments with a lot of Gnocchi data, this is a non-starter
(literally... the service basically can't start.) There maybe needs to
be a way to configure this, or only do it during deploy/bootstrap?
Unclear, but disabling for now; users can `chown -R gnocchi:gnocchi`
themselves in the meantime if need be.
Change-Id: I0bae6dfbbee9f63506c89bd6b392e7be07fd5930
* When using redis as the backend of osprofiler, it cannot connect to
redis because the redis_connection_string is incorrect.
* Let other places that use redis also use this variable.
Change-Id: I14de6597932d05cd7f804a35c6764ba4ae9087cd
Closes-Bug: #1833200
Signed-off-by: ZijianGuo <guozijn@gmail.com>
This allows gnocchi service endpoints to use custom hostnames, and adds the
following variables:
* gnocchi_internal_fqdn
* gnocchi_external_fqdn
These default to the old values of kolla_internal_fqdn or
kolla_external_fqdn.
This also adds a gnocchi_api_listen_port option, which defaults to
gnocchi_api_port for backward compatibility.
This option allow the user to differentiate between the port the
service listens on, and the port the service is reachable on. This is
useful for external load balancers which live on the same host as the
service itself.
Change-Id: Ic9a0f8130b19ed77987f45fd0e824b82ea7a7328
Implements: blueprint service-hostnames
We're duplicating code to build the keystone URLs in nearly every
config, where we've already done it in group_vars. Replace the
redundancy with a variable that does the same thing.
Change-Id: I207d77870e2535c1cdcbc5eaf704f0448ac85a7a
Use <project>_install_type instead of kolla_install_type
to set python_path. For example, general kolla_install_type
is 'binary', but user wants to deploy Horizon from 'source'.
Horizon templates still use python_path=/usr/share/openstack-dashboard,
it is wrong.
Change-Id: Ide6a24e17b1f8ab6506aa5e53f70693706830418
- Uses swift if swift is enabled.
- Uses ceph if ceph is enabled.
- Defaults to file if swift and ceph are enabled.
Explicitly set to swift or ceph when both are enabled.
- Include swift client detail in storage section of gnocchi conf
Change-Id: I78df9a2fbe546038e1d6df350d8db0fd9b6f6d49
Option auth_uri from group keystone_authtoken is deprecated[1].
Use option www_authenticate_uri from group keystone_authtoken.
[1]https://review.openstack.org/#/c/508522/
Co-Authored-By: confi-surya <singh.surya64mnnit@gmail.com>
Change-Id: Ifd8527d404f1df807ae8196eac2b3849911ddc26
Closes-Bug: #1761907
If SSL is enabled, api of multiple services returns
wrong external URL without https prefix.
Removal of condition for deletion of http header.
Change-Id: I4264e04d0d6b9a3e11ef7dd7add6c5e166cf9fb4
Closes-Bug: #1749155
Closes-Bug: #1717491
- Ceilometer
- Gnocchi
- Rally
This will copy only yaml or json policy file if they exist.
Change-Id: I59f3376ab9fb6fb83577465a6c9096764b9f19c0
Implements: blueprint support-custom-policy-yaml
Co-authored-By: Duong Ha-Quang <duonghq@vn.fujitsu.com>
This change allows the following use cases:
1. Using an already-configured MariaDB / MySQL server / Cluster
2. Using already-created DB users, without requiring root DB access.
Update: added external mariadb precheck
Change-Id: I78b0d178306d7c5293b0bf53e445f19f18b4b824
Implements: blueprint external-mariadb-support.
Closes-Bug: #1603121
Apache access log formats are modified to be consistent with
the format defined in wsgi-keystone.conf, which includes
the response time (%D) and X-forwarder-For fields.
Change-Id: I02aa5eb106fb894196dfb6e22daf2968e27ed3cb
Closes-Bug: #1703571
adding cors section to keystone and gnocchi templates when
grafana is enabled
Change-Id: I54f4c06ed64254df0f9481e461c9393a399212a3
Closes-bug: #1651796
Trace method is enabled in default for httpd. There is security risk
with trace enabled. So disable it in default. more info please check[0].
[0] https://security.stackexchange.com/a/7711
Change-Id: I4496a6d058d88e1abfb210085f189e7a610e0362
Closes-Bug: #1705160
