Introduce kolla_address filter.
Introduce put_address_in_context filter.
Add AF config to vars.
Address contexts:
- raw (default): <ADDR>
- memcache: inet6:[<ADDR>]
- url: [<ADDR>]
Other changes:
globals.yml - mention just IP in comment
prechecks/port_checks (api_intf) - kolla_address handles validation
3x interface conditional (swift configs: replication/storage)
2x interface variable definition with hostname
(haproxy listens; api intf)
1x interface variable definition with hostname with bifrost exclusion
(baremetal pre-install /etc/hosts; api intf)
neutron's ml2 'overlay_ip_version' set to 6 for IPv6 on tunnel network
basic multinode source CI job for IPv6
prechecks for rabbitmq and qdrouterd use proper NSS database now
MariaDB Galera Cluster WSREP SST mariabackup workaround
(socat and IPv6)
Ceph naming workaround in CI
TODO: probably needs documenting
RabbitMQ IPv6-only proto_dist
Ceph ms switch to IPv6 mode
Remove neutron-server ml2_type_vxlan/vxlan_group setting
as it is not used (let's avoid any confusion)
and could break setups without proper multicast routing
if it started working (also IPv4-only)
haproxy upgrade checks for slaves based on ipv6 addresses
TODO:
ovs-dpdk grabs ipv4 network address (w/ prefix len / submask)
not supported, invalid by default because neutron_external has no address
No idea whether ovs-dpdk works at all atm.
ml2 for xenapi
Xen is not supported too well.
This would require working with XenAPI facts.
rp_filter setting
This would require meddling with ip6tables (there is no sysctl param).
By default nothing is dropped.
Unlikely we really need it.
ironic dnsmasq is configured IPv4-only
dnsmasq needs DHCPv6 options and testing in vivo.
KNOWN ISSUES (beyond us):
One cannot use IPv6 address to reference the image for docker like we
currently do, see: https://github.com/moby/moby/issues/39033
(docker_registry; docker API 400 - invalid reference format)
workaround: use hostname/FQDN
RabbitMQ may fail to bind to IPv6 if hostname resolves also to IPv4.
This is due to old RabbitMQ versions available in images.
IPv4 is preferred by default and may fail in the IPv6-only scenario.
This should be no problem in real life as IPv6-only is indeed IPv6-only.
Also, when new RabbitMQ (3.7.16/3.8+) makes it into images, this will
no longer be relevant as we supply all the necessary config.
See: https://github.com/rabbitmq/rabbitmq-server/pull/1982
For reliable runs, at least Ansible 2.8 is required (2.8.5 confirmed
to work well). Older Ansible versions are known to miss IPv6 addresses
in interface facts. This may affect redeploys, reconfigures and
upgrades which run after VIP address is assigned.
See: https://github.com/ansible/ansible/issues/63227
Bifrost Train does not support IPv6 deployments.
See: https://storyboard.openstack.org/#!/story/2006689
Change-Id: Ia34e6916ea4f99e9522cd2ddde03a0a4776f7e2c
Implements: blueprint ipv6-control-plane
Signed-off-by: Radosław Piliszek <radoslaw.piliszek@gmail.com>
Sometimes as cloud admins, we want to only update code that is running
in a cloud. But we dont need to do anything else. Make an action in
kolla-ansible that allows us to do that.
Change-Id: I904f595c69f7276e71692696471e32fd1f88e6e8
Implements: blueprint deploy-containers-action
This allows the install type for the project to be different than
kolla_install_type
This can be used to avoid hitting bug 1786238, since kuryr only supports
the source type.
Change-Id: I2b6fc85bac092b1614bccfd22bee48442c55dda4
Closes-Bug: #1786238
Currently, we have a lot of logic for checking if a handler should run,
depending on whether config files have changed and whether the
container configuration has changed. As rm_work pointed out during
the recent haproxy refactor, these conditionals are typically
unnecessary - we can rely on Ansible's handler notification system
to only trigger handlers when they need to run. This removes a lot
of error prone code.
This patch removes conditional handler logic for all services. It is
important to ensure that we no longer trigger handlers when unnecessary,
because without these checks in place it will trigger a restart of the
containers.
Implements: blueprint simplify-handlers
Change-Id: I4f1aa03e9a9faaf8aecd556dfeafdb834042e4cd
We don't add extra volumes support for all services in patch [1].
In order to unify the management of the volume, so we need add extra volumes
support for these services.
[1] 12ff28a693
Change-Id: Ie148accdd8e6c60df6b521d55bda12b850c0d255
Partially-Implements: blueprint support-extra-volumes
Signed-off-by: ZijianGuo <guozijn@gmail.com>
Many tasks that use Docker have become specified already, but
not all. This change ensures all tasks that use the following
modules have become:
* kolla_docker
* kolla_ceph_keyring
* kolla_toolbox
* kolla_container_facts
It also adds become for 'command' tasks that use docker CLI.
Change-Id: I4a5ebcedaccb9261dbc958ec67e8077d7980e496
With this change, an operator may be able to stop a
service container without stopping all services in a host.
This change is the starting point to start
fast-forward upgrades support.
In next changes new flags will be introducced to disable
stop dataplane services during upgrades.
Change-Id: Ifde7a39d7d8596ef0d7405ecf1ac1d49a459d9ef
Implements: blueprint support-stop-containers
Since I701d495675178c3ed8ec1f00b31d09f198b38a6f merged, etcd only runs
on the control hosts, not the compute hosts. We therefore no longer
require the etcd group to include the compute hosts.
Since the group mapping is now static, we can remove the use of
host_in_groups from the etcd service, in favour of the simpler method of
specifying the group.
Change-Id: Id8f888d7321a30a85ff95e742f7e6c8e2b9c696f
Related-Bug: #1790415
In before, etcd container is launched in compute node if kuryr is
enabled. This logic breaks the all-in-one setup in which the etcd
cluster is configured with two members (controller and compute)
but it actually has one member only.
However, even if kuryr is enabled, running etcd in compute node
is not the common practice and kuryr has changed its devstack
plugin to run etcd on controller only [1].
[1] https://review.openstack.org/#/c/514815/
Closes-Bug: #1790415
Change-Id: I701d495675178c3ed8ec1f00b31d09f198b38a6f
This is because the environment variable ETCD_INITIAL_CLUSTER contains
compute nodes, which are not running etcd.
Compute nodes are in the etcd group to allow for kuryr, which needs etcd
to be running on compute nodes (why???). When kuryr is disabled, etcd is
not deployed on these hosts (using host_in_groups). However, the
ETCD_INITIAL_CLUSTER environment variable always includes all hosts in
the etcd group.
This change sets ETCD_INITIAL_CLUSTER correctly in both cases.
Change-Id: I11f812d3fdacf0eeb8236f9a39d673aaa480dd26
Closes-Bug: #1783963
This commit is to apply resource-constraints only to few OpenStack services.
Commit to apply constraints to other services will be made in coming commits.
Partially-Implements: blueprint resource-constraints
Change-Id: Icafa54baca24d2de64238222a5677b9d8b90e2aa
Add become to all tasks that use the module "kolla_docker"
Change-Id: I4309c4011687b88ec31d739fd8f834fe2326ff10
Partial-Implements: blueprint ansible-specific-task-become
- rename action and serial to kolla_ansible and kolla_serial
- use become instead of "sudo <command>" in shell
- Remove quota for failed_when and changed_when in rabbitmq tasks
Change-Id: I78cb60168aaa40bb6439198283546b7faf33917c
Implements: blueprint migrate-to-ansible-2-2-0
In ansible/roles/etcd/tasks/config.yml, the kolla_docker
compare_container action doesn't check environment.
Once a container is created, it won't get recreated if only the
environment change. This commit add the environment attribute to the
kolla_docker action in etcd role
Change-Id: I8fb71cc945867e06acc67f6d1256bf62f4276206
Closes-Bug: #1765517
Kuryr need etcd on each compute node to store
network data.
Etcd is only deployed in controller nodes at this moment.
Also this change remove and useless bootstrap tasks.
Depends-On: I9c6c876773288c2f951966498db0ff8af090ac20
Change-Id: I8a84334e831fb15f6cbdd3bc34d2159638df6b85
Closes-Bug: #1697699
wait_for module waits 300 seconds for the port started or stopped. This
is meaningless and useless in precheck. This patch change timeout to 1
seconds.
Change-Id: I9b251ec4ba17ce446655917e8ef5e152ef947298
Closes-Bug: #1688152
Add a new subcommand 'check' to kolla-ansible, used to run the
smoke/sanity checks.
Add stub files to all services that don't currently have checks.
Change-Id: I9f661c5fc51fd5b9b266f23f6c524884613dee48
Partially-implements: blueprint sanity-check-container
add environment parameter to handlers restart etcd container as
there are env parameters in default
Closes-Bug: #1669089
Change-Id: I99266e7a367cb54c77b3d3da35ba5055acd98f62
During configuration file generation one uses local variable
api_interface that reference remote host. Instead we should
use hostvars to find out correct interface name for each host
mentioned in configuration.
Change-Id: I9f64fdf2cd18bcc0bbf1c4193349186d9a7658bc
Closes-Bug: #1650195
Add /etc/localtime:/etc/localtime:ro to volume for aodh, barbican, etcd,
gnocchi, kuryr and sahara.
All the containers are added in Netwon cycle, so no need to backport
Closes-Bug: #1633049
Change-Id: I9cdba54cf730af44fb1a9ff6f2c936d23dadbe9a
do_reconfigure.yml is introduced to use serial directive. But we use
it in wrong. Now serial has moved to playbook file. So it is time to
remove the do_reconfigure.yml file
Closes-Bug: #1628152
Change-Id: I8d42d27e6bc302a0e575b0353956eaef9b2ca9fd
