Include a reference to the globally configured Certificate Authority to
all services. Services use the CA to verify HTTPs connections.
Change-Id: I38da931cdd7ff46cce1994763b5c713652b096cc
Partially-Implements: blueprint support-trusted-ca-certificate-file
For the CentOS 7 to 8 transition, we will have a period where both
CentOS 7 and 8 images are available. We differentiate these images via a
tag - the CentOS 8 images will have a tag of train-centos8 (or
master-centos8 temporarily).
To achieve this, and maintain backwards compatibility for the
openstack_release variable, we introduce a new 'openstack_tag' variable.
This variable is based on openstack_release, but has a suffix of
'openstack_tag_suffix', which is empty except on CentOS 8 where it has a
value of '-centos8'.
Change-Id: I12ce4661afb3c255136cdc1aabe7cbd25560d625
Partially-Implements: blueprint centos-rhel-8
As part of the effort to implement Ansible code linting in CI
(using ansible-lint) - we need to implement recommendations from
ansible-lint output [1].
One of them is to stop using local_action in favor of delegate_to -
to increase readability and and match the style of typical ansible
tasks.
[1]: https://review.opendev.org/694779/
Partially implements: blueprint ansible-lint
Change-Id: I46c259ddad5a6aaf9c7301e6c44cd8a1d5c457d3
Introduce kolla_address filter.
Introduce put_address_in_context filter.
Add AF config to vars.
Address contexts:
- raw (default): <ADDR>
- memcache: inet6:[<ADDR>]
- url: [<ADDR>]
Other changes:
globals.yml - mention just IP in comment
prechecks/port_checks (api_intf) - kolla_address handles validation
3x interface conditional (swift configs: replication/storage)
2x interface variable definition with hostname
(haproxy listens; api intf)
1x interface variable definition with hostname with bifrost exclusion
(baremetal pre-install /etc/hosts; api intf)
neutron's ml2 'overlay_ip_version' set to 6 for IPv6 on tunnel network
basic multinode source CI job for IPv6
prechecks for rabbitmq and qdrouterd use proper NSS database now
MariaDB Galera Cluster WSREP SST mariabackup workaround
(socat and IPv6)
Ceph naming workaround in CI
TODO: probably needs documenting
RabbitMQ IPv6-only proto_dist
Ceph ms switch to IPv6 mode
Remove neutron-server ml2_type_vxlan/vxlan_group setting
as it is not used (let's avoid any confusion)
and could break setups without proper multicast routing
if it started working (also IPv4-only)
haproxy upgrade checks for slaves based on ipv6 addresses
TODO:
ovs-dpdk grabs ipv4 network address (w/ prefix len / submask)
not supported, invalid by default because neutron_external has no address
No idea whether ovs-dpdk works at all atm.
ml2 for xenapi
Xen is not supported too well.
This would require working with XenAPI facts.
rp_filter setting
This would require meddling with ip6tables (there is no sysctl param).
By default nothing is dropped.
Unlikely we really need it.
ironic dnsmasq is configured IPv4-only
dnsmasq needs DHCPv6 options and testing in vivo.
KNOWN ISSUES (beyond us):
One cannot use IPv6 address to reference the image for docker like we
currently do, see: https://github.com/moby/moby/issues/39033
(docker_registry; docker API 400 - invalid reference format)
workaround: use hostname/FQDN
RabbitMQ may fail to bind to IPv6 if hostname resolves also to IPv4.
This is due to old RabbitMQ versions available in images.
IPv4 is preferred by default and may fail in the IPv6-only scenario.
This should be no problem in real life as IPv6-only is indeed IPv6-only.
Also, when new RabbitMQ (3.7.16/3.8+) makes it into images, this will
no longer be relevant as we supply all the necessary config.
See: https://github.com/rabbitmq/rabbitmq-server/pull/1982
For reliable runs, at least Ansible 2.8 is required (2.8.5 confirmed
to work well). Older Ansible versions are known to miss IPv6 addresses
in interface facts. This may affect redeploys, reconfigures and
upgrades which run after VIP address is assigned.
See: https://github.com/ansible/ansible/issues/63227
Bifrost Train does not support IPv6 deployments.
See: https://storyboard.openstack.org/#!/story/2006689
Change-Id: Ia34e6916ea4f99e9522cd2ddde03a0a4776f7e2c
Implements: blueprint ipv6-control-plane
Signed-off-by: Radosław Piliszek <radoslaw.piliszek@gmail.com>
Sometimes as cloud admins, we want to only update code that is running
in a cloud. But we dont need to do anything else. Make an action in
kolla-ansible that allows us to do that.
Change-Id: I904f595c69f7276e71692696471e32fd1f88e6e8
Implements: blueprint deploy-containers-action
This ensures we execute the keystone os_* modules in one place.
Also rework some of the task names and loop item display.
Change-Id: I6764a71e8147410e7b24b0b73d0f92264f45240c
Use upstream Ansible modules for registration of services, endpoints,
users, projects, roles, and role grants.
Change-Id: I7c9138d422cc91c177fd8992347176bb54156b5a
This commit adds the functionality for an operator to specify
their own trusted CA certificate file for interacting with the
Keystone API.
Implements: blueprint support-trusted-ca-certificate-file
Change-Id: I84f9897cc8e107658701fb309ec318c0f805883b
After all of the discussions we had on
"https://review.opendev.org/#/c/670626/2", I studied all projects that
have an "oslo_messaging" section. Afterwards, I applied the same method
that is already used in "oslo_messaging" section in Nova, Cinder, and
others. This guarantees that we have a consistent method to
enable/disable notifications across projects based on components (e.g.
Ceilometer) being enabled or disabled. Here follows the list of
components, and the respective changes I did.
* Aodh:
The section is declared, but it is not used. Therefore, it will
be removed in an upcomming PR.
* Congress:
The section is declared, but it is not used. Therefore, it will
be removed in an upcomming PR.
* Cinder:
It was already properly configured.
* Octavia:
The section is declared, but it is not used. Therefore, it will
be removed in an upcomming PR.
* Heat:
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Ceilometer:
Ceilometer publishes some messages in the rabbitMQ. However, the
default driver is "messagingv2", and not ''(empty) as defined in Oslo;
these configurations are defined in ceilometer/publisher/messaging.py.
Therefore, we do not need to do anything for the
"oslo_messaging_notifications" section in Ceilometer
* Tacker:
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Neutron:
It was already properly configured.
* Nova
It was already properly configured. However, we found another issue
with its configuration. Kolla-ansible does not configure nova
notifications as it should. If 'searchlight' is not installed (enabled)
the 'notification_format' should be 'unversioned'. The default is
'both'; so nova will send a notification to the queue
versioned_notifications; but that queue has no consumer when
'searchlight' is disabled. In our case, the queue got 511k messages.
The huge amount of "stuck" messages made the Rabbitmq cluster
unstable.
https://bugzilla.redhat.com/show_bug.cgi?id=1478274https://bugs.launchpad.net/ceilometer/+bug/1665449
* Nova_hyperv:
I added the same configurations as in Nova project.
* Vitrage
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Searchlight
I created a mechanism similar to what we have in AODH, Cinder, Nova,
and others.
* Ironic
I created a mechanism similar to what we have in AODH, Cinder, Nova,
and others.
* Glance
It was already properly configured.
* Trove
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Blazar
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Sahara
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Watcher
I created a mechanism similar to what we have in AODH, Cinder, Nova,
and others.
* Barbican
I created a mechanism similar to what we have in Cinder, Nova,
and others. I also added a configuration to 'keystone_notifications'
section. Barbican needs its own queue to capture events from Keystone.
Otherwise, it has an impact on Ceilometer and other systems that are
connected to the "notifications" default queue.
* Keystone
Keystone is the system that triggered this work with the discussions
that followed on https://review.opendev.org/#/c/670626/2. After a long
discussion, we agreed to apply the same approach that we have in Nova,
Cinder and other systems in Keystone. That is what we did. Moreover, we
introduce a new topic "barbican_notifications" when barbican is
enabled. We also removed the "variable" enable_cadf_notifications, as
it is obsolete, and the default in Keystone is CADF.
* Mistral:
It was hardcoded "noop" as the driver. However, that does not seem a
good practice. Instead, I applied the same standard of using the driver
and pushing to "notifications" queue if Ceilometer is enabled.
* Cyborg:
I created a mechanism similar to what we have in AODH, Cinder, Nova,
and others.
* Murano
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Senlin
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Manila
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Zun
The section is declared, but it is not used. Therefore, it will
be removed in an upcomming PR.
* Designate
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Magnum
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
Closes-Bug: #1838985
Change-Id: I88bdb004814f37c81c9a9c4e5e491fac69f6f202
Signed-off-by: Rafael Weingärtner <rafael@apache.org>
Docker has no restart policy named 'never'. It has 'no'.
This has bitten us already (see [1]) and might bite us again whenever
we want to change the restart policy to 'no'.
This patch makes our docker integration honor all valid restart policies
and only valid restart policies.
All relevant docker restart policy usages are patched as well.
I added some FIXMEs around which are relevant to kolla-ansible docker
integration. They are not fixed in here to not alter behavior.
[1] https://review.opendev.org/667363
Change-Id: I1c9764fb9bbda08a71186091aced67433ad4e3d6
Signed-off-by: Radosław Piliszek <radoslaw.piliszek@gmail.com>
A common class of problems goes like this:
* kolla-ansible deploy
* Hit a problem, often in ansible/roles/*/tasks/bootstrap.yml
* Re-run kolla-ansible deploy
* Service fails to start
This happens because the DB is created during the first run, but for some
reason we fail before performing the DB sync. This means that on the second run
we don't include ansible/roles/*/tasks/bootstrap_service.yml because the DB
already exists, and therefore still don't perform the DB sync. However this
time, the command may complete without apparent error.
We should be less careful about when we perform the DB sync, and do it whenever
it is necessary. There is an argument for not doing the sync during a
'reconfigure' command, although we will not change that here.
This change only always performs the DB sync during 'deploy' and
'reconfigure' commands.
Change-Id: I82d30f3fcf325a3fdff3c59f19a1f88055b566cc
Closes-Bug: #1823766
Closes-Bug: #1797814
Currently, we have a lot of logic for checking if a handler should run,
depending on whether config files have changed and whether the
container configuration has changed. As rm_work pointed out during
the recent haproxy refactor, these conditionals are typically
unnecessary - we can rely on Ansible's handler notification system
to only trigger handlers when they need to run. This removes a lot
of error prone code.
This patch removes conditional handler logic for all services. It is
important to ensure that we no longer trigger handlers when unnecessary,
because without these checks in place it will trigger a restart of the
containers.
Implements: blueprint simplify-handlers
Change-Id: I4f1aa03e9a9faaf8aecd556dfeafdb834042e4cd
Many tasks that use Docker have become specified already, but
not all. This change ensures all tasks that use the following
modules have become:
* kolla_docker
* kolla_ceph_keyring
* kolla_toolbox
* kolla_container_facts
It also adds become for 'command' tasks that use docker CLI.
Change-Id: I4a5ebcedaccb9261dbc958ec67e8077d7980e496
Several services inherited [service_credentials] config sections which
they don't use in their code.
Change-Id: Iccf4358e85fb3d7ed25bc1762ff532b2c32bea4a
When integrating 3rd party component into openstack with kolla-ansible,
maybe have to mount some extra volumes to container.
Change-Id: I69108209320edad4c4ffa37dabadff62d7340939
Implements: blueprint support-extra-volumes
This allows barbican service endpoints to use custom hostnames, and adds the
following variables:
* barbican_internal_fqdn
* barbican_external_fqdn
These default to the old values of kolla_internal_fqdn or
kolla_external_fqdn.
This also adds a barbican_api_listen_port option, which defaults to
barbican_api_port for backward compatibility.
This option allow the user to differentiate between the port the
service listens on, and the port the service is reachable on. This is
useful for external load balancers which live on the same host as the
service itself.
Change-Id: I1807a9c8b64d737d0e278bb3e925fecb4fadfb08
Implements: blueprint service-hostnames
We're duplicating code to build the keystone URLs in nearly every
config, where we've already done it in group_vars. Replace the
redundancy with a variable that does the same thing.
Change-Id: I207d77870e2535c1cdcbc5eaf704f0448ac85a7a
With this change, an operator may be able to stop a
service container without stopping all services in a host.
This change is the starting point to start
fast-forward upgrades support.
In next changes new flags will be introducced to disable
stop dataplane services during upgrades.
Change-Id: Ifde7a39d7d8596ef0d7405ecf1ac1d49a459d9ef
Implements: blueprint support-stop-containers
Barbican API uses uWSGI, which by default writes out log files using
0640 permissions and default ownership for the user. This means that the
log file in /var/log/kolla/barbican/barbican-api.log is not readable by
fluentd.
This was tested via the following command on a queens deployment:
$ docker exec -it fluentd bash
find /var/log/kolla/ -type f | while read f; do test -r $f || echo
"Cannot read $f"; done
Cannot read /var/log/kolla/barbican/barbican-api.log
Generally there are a few ways in which access is provided to log file
for fluentd:
1. Set log file ownership to $USER:kolla, permissions to 0640.
2. Set log file ownership to $USER:$USER, permissions to 0644.
3. MariaDB is a special case, and uses 0640 with the fluentd user added
to the mysql group.
Of these, 1. seems the most secure.
This change uses the --logfile-chmod argument to set the log file
permissions to 644, since it does not appear possible to specify a group
to change ownership to using --logfile-chown. We use command line
arguments since putting the option in the config file does not seem to
work. Perhaps it is an ordering issue.
Change-Id: If98ca7cd9630b5622132a00718cb09304b8285b3
Closes-Bug: #1794472
Having all services in one giant haproxy file makes altering
configuration for a service both painful and dangerous. Each service
should be configured with a simple set of variables and rendered with a
single unified template.
Available are two new templates:
* haproxy_single_service_listen.cfg.j2: close to the original style, but
only one service per file
* haproxy_single_service_split.cfg.j2: using the newer haproxy syntax
for separated frontend and backend
For now the default will be the single listen block, for ease of
transition.
Change-Id: I6e237438fbc0aa3c89a3c8bd706a53b74e71904b
Now kolla dev mode only support clone master branch from git,
add version tag to support clone dedicated branch.
Change-Id: I88de238e5dc7461ba0662a3ecea9a2d80fd0db60
Option auth_uri from group keystone_authtoken is deprecated[1].
Use option www_authenticate_uri from group keystone_authtoken.
[1]https://review.openstack.org/#/c/508522/
Co-Authored-By: confi-surya <singh.surya64mnnit@gmail.com>
Change-Id: Ifd8527d404f1df807ae8196eac2b3849911ddc26
Closes-Bug: #1761907
This commit is to apply resource-constraints only to few OpenStack services.
Commit to apply constraints to other services will be made in coming commits.
Partially-Implements: blueprint resource-constraints
Change-Id: Icafa54baca24d2de64238222a5677b9d8b90e2aa
Add become to all tasks that use the module "kolla_docker"
Change-Id: I4309c4011687b88ec31d739fd8f834fe2326ff10
Partial-Implements: blueprint ansible-specific-task-become
Provide support fot kolla dev mode in barbican. When
'kolla_dev_mode' or 'barbican_dev_mode' variables are
enabled, source code of barbican project is cloned
and bindmounted.
Partially implements: blueprint mount-sources
Change-Id: I8d48c43cf599548b4536285759ed0078f359538e
- rename action and serial to kolla_ansible and kolla_serial
- use become instead of "sudo <command>" in shell
- Remove quota for failed_when and changed_when in rabbitmq tasks
Change-Id: I78cb60168aaa40bb6439198283546b7faf33917c
Implements: blueprint migrate-to-ansible-2-2-0
If SSL is enabled, api of multiple services returns
wrong external URL without https prefix.
Removal of condition for deletion of http header.
Change-Id: I4264e04d0d6b9a3e11ef7dd7add6c5e166cf9fb4
Closes-Bug: #1749155
Closes-Bug: #1717491
- remove uesless module_extra_vars, this is a historical issue. In the
past, we use 'docker exec kolla_toolbox ansible xxx' to run module on
target node, so complex data have to pass through extra_vars. Now we
are using kolla_toolbox module, no need to use extra_vars anymore.
- Remove some useless until.
Change-Id: I72ed28001202917f9a82a1c3ea33cd6319911ec8
This change allows the following use cases:
1. Using an already-configured MariaDB / MySQL server / Cluster
2. Using already-created DB users, without requiring root DB access.
Update: added external mariadb precheck
Change-Id: I78b0d178306d7c5293b0bf53e445f19f18b4b824
Implements: blueprint external-mariadb-support.
Closes-Bug: #1603121
- Barbican
- Ceilometer
- Cloudkitty
- Congress
- Designate
This will copy only yaml or json policy file if they exist.
Change-Id: Iaa19f64073d8bdee948bc2de58e095ca72afc092
Implements: blueprint support-custom-policy-yaml
Co-authored-By: Duong Ha-Quang <duonghq@vn.fujitsu.com>
through the database_address has beed defined in groups_vars/all.yml, we should
better use it, this way, if we want to use external database, we just need to
redefined in all.yml
refer to https://github.com/openstack/kolla-ansible/blob/master/ansible/group_vars/all.yml#L83
Co-Authored-By: chenqiaomin <chen.qiaomin@99cloud.net>
Change-Id: Ie559301451954e16347ceaabf02f594c5c5cbe56
This commit separates the messaging rpc and notify transports in order
to support separate and different oslo.messaging backends
This patch:
* add rpc and notify variables
* update service role conf templates
* add example to globals.yaml
* add release note
Implements: blueprint hybrid-messaging
Change-Id: I34691c2895c8563f1f322f0850ecff98d11b5185
When deploying with tls enabled in public
endpoints, ansible modules fails due SSL certificates
are self-signed.
This change adds a new variable to allow customization
on which endpoints ansible should connect.
Defaults to admin because admin auth parameters defaults
to admin endpoint.
Change-Id: Ic3ed58cf9c9579cae08a11bbfe6fce983b5a9cbc
Closes-Bug: #1720995
Actually Openstack services configuration can be overriden using many
files:
- /etc/kolla/config/<< service name >>/<< config file >>
- /etc/kolla/config/<< service name >>/<<host>>/<< config file >>
- /etc/kolla/config/global.conf
- /etc/kolla/config/database.conf
- /etc/kolla/config/messaging.conf
Only per-service configuration is actually documented here:
https://github.com/openstack/kolla-ansible/blob/master/doc/advanced-configuration.rst#L164
Allowing to globally modify service configuration can be perform too,
but it can be done in 3 different manners, all not documented:
- /etc/kolla/config/global.conf
- /etc/kolla/config/database.conf
- /etc/kolla/config/messaging.conf
database.conf and messaging.conf seems redundant with global.conf.
In order to simplify codebase it seems logical to remove them.
Documentation has been added for overriding configuration globally and
release note has been added too.
Closes-Bug: #1682479
Change-Id: I5d922dfc0d938173bad34ac64e490b78db1b7e31
kolla-kubernetes is using its own configuration generation[0], so it is
time for kolla-ansible to remove the related code to simplify the
logical.
[0] https://github.com/openstack/kolla-kubernetes/tree/master/ansible
Change-Id: I7bb0b7fe3b8eea906613e936d5e9d19f4f2e80bb
Implements: blueprint clean-k8s-config
