The path of the template file under the same role
can easily be omitted, and we are using this omitting
in most places except those this commit is fixing.
TrivialFix
Change-Id: I6d1563e235151669d9d9268d69555aae15e31926
Due to poor planning on our variable names we have a situation where
we have "internal_address" which must be a VIP, but "external_address"
which should be a DNS name. Now with two vips "external_vip_address"
is a new variable.
This corrects that issue by deprecating kolla_internal_address and
replacing it with 4 nicely named variables.
kolla_internal_vip_address
kolla_internal_fqdn
kolla_external_vip_address
kolla_external_fqdn
The default behaviour will remain the same, and the way the variable
inheritance is setup the kolla_internal_address variable can still be
set in globals.yml and propogate out to these 4 new variables like it
normally would, but all reference to kolla_internal_address has been
completely removed.
Change-Id: I4556dcdbf4d91a8d2751981ef9c64bad44a719e5
Partially-Implements: blueprint ssl-kolla
The generic driver for manila need the neutron agents
and OVS / Linuxbridge running on the same node as manila_share.
This is necessary when the DHSS (Driver Handles Share Servers)
is the value "True", so that the manila_share can talk
with NFS manager.
Change-Id: I21904659b1789fa71118401bfb6ac2227ae564da
Partially-Implements: blueprint enable-manila-containers
Since openvswitch is handled in the kernel, it really is as simple as
upgrade the container since the container only has userspace tools in
it.
Partially-Implements: blueprint upgrade-kolla
Implements: blueprint upgrade-neutron
Change-Id: Iec57c67a1ccba8f48b752fe832cd714bcc658af0
Changed hard-code keystone username for neutron and heat in the
neutron.conf template and heat.conf template.
TrivialFix
Change-Id: Ibdd1422bd4cae5011f9fc5f4de7dfc58601dca1d
The new heka changed log path. It is necessary to change
the dnsmasq log path as well.
Change-Id: Iaffecb8baf87961931727ce653f6c72740896a8f
Closes-Bug: 1548199
The extend_start.sh script for rsyslog is removed as it is no longer
needed. Docker no longer binds to /dev/log or /run/kolla/log
Closes-Bug: #1544545
Change-Id: Ic0a323a26ee4e9e15baf4598285844a8a4955f23
To allow for TLS to protect the service endpoints, the protocol
in the URLs for the endpoints will be either http or https.
This patch removes the hardcoded values of http and replaces them
with variables that can be adjusted accordingly in future patches.
Change-Id: Ibca6f8aac09c65115d1ac9957410e7f81ac7671e
Partially-implements: blueprint ssl-kolla
*** Requires Docker 1.10 which is released ***
Documentation will be in the next patch. You must set the following
in your docker.service daemon control file for propogation to work:
[Service]
MountFlags=shared
======================================================================
Thanks to mount propagation in Docker 1.10 we can use thin containers
finally! This is extremely useful to operators since now they can
access the network namespaces from the hosts (outside the neutron
container). But additionally it allows us to implement the VPN agent
and other services easier.
Neutron containers and the neutron role are brought into the standards
of the new Kolla. Completely with drop-root and ansible formating
updates.
The ip_wrapper.py script was (thankfully) not needed so it has been
removed from the repo.
Partially-Implements: blueprint upgrade-neutron
Change-Id: Iaf5555283240457e1912459f397a6393d886fba1
Docker 1.10 has broken the gate and this patch will correct that
breakage.
The issue comes with rsyslog. Due to a commit in Docker 1.10 [1] we
must change the way we get the log socket for rsyslog. The /dev/
folder will no longer populate as we used it. So instead we simply
make a new socket in a path we control and share that to the correct
location in the containers.
Additionally, adjust the gate for new Docker daemon.
[1] https://github.com/docker/docker/pull/16639
Partially-Implements: blueprint kolla-upgrade
Change-Id: I881a2ecdf6d7b35991e1d38a3f3e60d022d6577f
This change is needed for clarity. We have a kolla-ansible script.
We have a kolla-mesos repo. We plan to have a kolla-ansible repo.
Already we have had far too much confusion about whether we are
talking about the container or the project. Naming this kolla-toolbox
eliminates all of that confusion and its probably a bit more accurate
of a name too.
Closes-Bug: #1541053
Change-Id: I8fd1f49d5a22b36ede5b10f46b9fe02ddda9007e
Add bootstrap label to all bootstrap containers to ensure that when
the a new container is launched a difference is seen between it and
the bootstrap container since we cannot rely on ENV variables for
this. This only affects mariadb at this stage, but it is needed to
ensure rabbitmq works when we switch to named volumes.
Change-Id: Ia022af26212d2e5445c06149848831037a508407
Closes-Bug: #1538136
After introduction of pull action and turing every main.yml into
{{action}}.yml we lost ability to perform upgrade
Change-Id: Ie9fa2cd083b061033abc733fba53d54f9c55e393
Fixes-Bug: #1538210
Option "verbose" from group "DEFAULT" is deprecated for removal.
Its value may be silently ignored in the future.
If this option is not set explicitly, there is no such warning.
Furthermore, the default value of verbose is true, so there is
no need to set this value in config files.
TrivialFix
Change-Id: I3ec2a8900c984a64bc0645672ef89a63975f7f4e
This intentionally leaves out rabbitmq from this patchset. It will
require additional work to remove its data container
UpgradeImpact
Partially-Implements: blueprint docker-named-volumes
Change-Id: Id68b8e43a3c077ef4f4f4d67ea34d0692e66eef7
- See instructions in doc/nova-fake-driver.rst
Implements: blueprint nova-fake-driver
Change-Id: I553a40c2df39bdcc391eb1b8b2b8fd5f4ed48c33
Signed-off-by: Hui Kang <kangh@us.ibm.com>
Signed-off-by: Marcio D. Silva <marcios@us.ibm.com>
Convert config creation from a playbook to an action_plugin. This
reduces the complexity and confusion while retaining the same augment
structure and flexibility.
This allows us to remove the 0-byte files as requirements. They will
still be used if they are present (this means we require additional
documentation around them).
DocImpact
Closes-Bug: #1528430
Change-Id: I2c789f6be9f195c7771ca093a6d59499564b4740
In heterogeneous environment, api_interfaces are different each other.
So we should specify it from hostvars.
Implements: bp configure-network-interface
Change-Id: Id15d70bfb9ebb62a64a3847a6b77407efb171dbe
- this change moves the ovs_ensure_configured.sh file to the
openvswitch-db container.
- this change reorders the plays in ansible/roles/neutron/tasks/start.yml
to configure the ovs bridges before starting the vswitchd container.
Change-Id: Ied1a82d48377534c15680406df9a96caf3b79515
Closes-Bug: #1522133
Use virtualenv for installation of OpenStack projects and
dependencies to avoid conflicts with Python libraries installed
by non-OpenStack binary packages.
Change-Id: I21ecd673b2e93335b1d3dd4e279e940c9d694c3c
Implements: blueprint virtualenv
vxlan should be allowed in tenant_network_types because it used in
tunnel_types.
Allow all flat networks when ironic enabled.
TrivialFix
Change-Id: I39b2fbf26bb4c9047e7c3ea5ca7749ae113e4ed8
Additionally remove tty from the container cleanup docker section. It
was added in a sed in a previous patchset by serves no purpose.
Change-Id: Ib617870616bca687f72ffaa44b2e9a3a11ef1011
Partially-Implements: blueprint cleanup-playbooks
The bootstrap tasks could be started on any node listed in the
site.yml
The issue is that all the tasks must run on the same node, and the
only node that all the tasks can run on is the 'api' node due to
needing to start the bootstrap container which binds in the configs.
delegate_to is required to ensure that the proper node gets the task.
Co-Authored-By: Sam Yaple <sam@yaple.net>
Change-Id: Ica04ab366777a571a92212ac22c482f1881d4ecd
Closes-Bug: #1513598
Related-Bug: #1513439
database_user_create was not correctly referenced when parsing the
variable names. This could never actually lead to a situation that
reported a false change, but it could break an operation if you were
using the --step option with ansible and skipped the database create
task.
TrivialFix
Backport: Liberty
Change-Id: Idf69fffcc3814f509448ccea11b7d175f074ccf1
