After all of the discussions we had on
"https://review.opendev.org/#/c/670626/2", I studied all projects that
have an "oslo_messaging" section. Afterwards, I applied the same method
that is already used in "oslo_messaging" section in Nova, Cinder, and
others. This guarantees that we have a consistent method to
enable/disable notifications across projects based on components (e.g.
Ceilometer) being enabled or disabled. Here follows the list of
components, and the respective changes I did.
* Aodh:
The section is declared, but it is not used. Therefore, it will
be removed in an upcomming PR.
* Congress:
The section is declared, but it is not used. Therefore, it will
be removed in an upcomming PR.
* Cinder:
It was already properly configured.
* Octavia:
The section is declared, but it is not used. Therefore, it will
be removed in an upcomming PR.
* Heat:
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Ceilometer:
Ceilometer publishes some messages in the rabbitMQ. However, the
default driver is "messagingv2", and not ''(empty) as defined in Oslo;
these configurations are defined in ceilometer/publisher/messaging.py.
Therefore, we do not need to do anything for the
"oslo_messaging_notifications" section in Ceilometer
* Tacker:
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Neutron:
It was already properly configured.
* Nova
It was already properly configured. However, we found another issue
with its configuration. Kolla-ansible does not configure nova
notifications as it should. If 'searchlight' is not installed (enabled)
the 'notification_format' should be 'unversioned'. The default is
'both'; so nova will send a notification to the queue
versioned_notifications; but that queue has no consumer when
'searchlight' is disabled. In our case, the queue got 511k messages.
The huge amount of "stuck" messages made the Rabbitmq cluster
unstable.
https://bugzilla.redhat.com/show_bug.cgi?id=1478274https://bugs.launchpad.net/ceilometer/+bug/1665449
* Nova_hyperv:
I added the same configurations as in Nova project.
* Vitrage
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Searchlight
I created a mechanism similar to what we have in AODH, Cinder, Nova,
and others.
* Ironic
I created a mechanism similar to what we have in AODH, Cinder, Nova,
and others.
* Glance
It was already properly configured.
* Trove
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Blazar
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Sahara
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Watcher
I created a mechanism similar to what we have in AODH, Cinder, Nova,
and others.
* Barbican
I created a mechanism similar to what we have in Cinder, Nova,
and others. I also added a configuration to 'keystone_notifications'
section. Barbican needs its own queue to capture events from Keystone.
Otherwise, it has an impact on Ceilometer and other systems that are
connected to the "notifications" default queue.
* Keystone
Keystone is the system that triggered this work with the discussions
that followed on https://review.opendev.org/#/c/670626/2. After a long
discussion, we agreed to apply the same approach that we have in Nova,
Cinder and other systems in Keystone. That is what we did. Moreover, we
introduce a new topic "barbican_notifications" when barbican is
enabled. We also removed the "variable" enable_cadf_notifications, as
it is obsolete, and the default in Keystone is CADF.
* Mistral:
It was hardcoded "noop" as the driver. However, that does not seem a
good practice. Instead, I applied the same standard of using the driver
and pushing to "notifications" queue if Ceilometer is enabled.
* Cyborg:
I created a mechanism similar to what we have in AODH, Cinder, Nova,
and others.
* Murano
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Senlin
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Manila
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Zun
The section is declared, but it is not used. Therefore, it will
be removed in an upcomming PR.
* Designate
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Magnum
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
Closes-Bug: #1838985
Change-Id: I88bdb004814f37c81c9a9c4e5e491fac69f6f202
Signed-off-by: Rafael Weingärtner <rafael@apache.org>
A common class of problems goes like this:
* kolla-ansible deploy
* Hit a problem, often in ansible/roles/*/tasks/bootstrap.yml
* Re-run kolla-ansible deploy
* Service fails to start
This happens because the DB is created during the first run, but for some
reason we fail before performing the DB sync. This means that on the second run
we don't include ansible/roles/*/tasks/bootstrap_service.yml because the DB
already exists, and therefore still don't perform the DB sync. However this
time, the command may complete without apparent error.
We should be less careful about when we perform the DB sync, and do it whenever
it is necessary. There is an argument for not doing the sync during a
'reconfigure' command, although we will not change that here.
This change only always performs the DB sync during 'deploy' and
'reconfigure' commands.
Change-Id: I82d30f3fcf325a3fdff3c59f19a1f88055b566cc
Closes-Bug: #1823766
Closes-Bug: #1797814
Currently, we have a lot of logic for checking if a handler should run,
depending on whether config files have changed and whether the
container configuration has changed. As rm_work pointed out during
the recent haproxy refactor, these conditionals are typically
unnecessary - we can rely on Ansible's handler notification system
to only trigger handlers when they need to run. This removes a lot
of error prone code.
This patch removes conditional handler logic for all services. It is
important to ensure that we no longer trigger handlers when unnecessary,
because without these checks in place it will trigger a restart of the
containers.
Implements: blueprint simplify-handlers
Change-Id: I4f1aa03e9a9faaf8aecd556dfeafdb834042e4cd
Many tasks that use Docker have become specified already, but
not all. This change ensures all tasks that use the following
modules have become:
* kolla_docker
* kolla_ceph_keyring
* kolla_toolbox
* kolla_container_facts
It also adds become for 'command' tasks that use docker CLI.
Change-Id: I4a5ebcedaccb9261dbc958ec67e8077d7980e496
When integrating 3rd party component into openstack with kolla-ansible,
maybe have to mount some extra volumes to container.
Change-Id: I69108209320edad4c4ffa37dabadff62d7340939
Implements: blueprint support-extra-volumes
Several config file permissions are incorrect on the host. In general,
files should be 0660, and directories and executables 0770.
Change-Id: Id276ac1864f280554e98b937f2845bb424d521de
Closes-Bug: #1821579
Commit 2f6b1c6890cf7ea6b0dd33ac219646e4dcaf1fd6 changed the way the
cephfs source path was generated and dropped the source path component,
keeping only the list of IPs and ports. This results in failures to
mount cephfs with the following message:
source mount path was not specified
failed to resolve source
Change-Id: I94d18ec064971870264ae8d0b279564f2172e548
Closes-Bug: #1819502
We're duplicating code to build the keystone URLs in nearly every
config, where we've already done it in group_vars. Replace the
redundancy with a variable that does the same thing.
Change-Id: I207d77870e2535c1cdcbc5eaf704f0448ac85a7a
This allows neutron service endpoints to use custom hostnames, and adds the
following variables:
* neutron_internal_fqdn
* neutron_external_fqdn
These default to the old values of kolla_internal_fqdn or
kolla_external_fqdn.
This also adds a neutron_server_listen_port option, which defaults to
neutron_server_port for backward compatibility.
This option allow the user to differentiate between the port the
service listens on, and the port the service is reachable on. This is
useful for external load balancers which live on the same host as the
service itself.
Change-Id: I87d7387326b6eaa6adae1600b48d480319d10676
Implements: blueprint service-hostnames
With this change, an operator may be able to stop a
service container without stopping all services in a host.
This change is the starting point to start
fast-forward upgrades support.
In next changes new flags will be introducced to disable
stop dataplane services during upgrades.
Change-Id: Ifde7a39d7d8596ef0d7405ecf1ac1d49a459d9ef
Implements: blueprint support-stop-containers
If upgrading the nova, cinder or manila services via 'kolla-ansible
upgrade', the Ceph config files are not generated. Users will expect
that these files are generated, to pull in any changes from their
configuration or the base kolla configuration.
This change moves Ceph tasks inside config.yml to ensure that they are
performed during deploy, reconfigure and upgrade. This has been done for
nova, cinder, gnocchi and manila - glance already does this.
Change-Id: Ic75692c2bcba9b81dee922ff6fbbccd160e7fa19
Closes-Bug: #1794275
Various ceph-related tasks were missing a 'become' that would allow them
to work as a non-root user. This seems to only cause a problem after an
initial deployment, perhaps due to the recursive ownership & permissions
changes at the end of the ceph.yml and external_ceph.yml files.
This change adds the necessary becomes.
Change-Id: I887c7b3bdef49db1dd1bf9e5bdbf5dc47b7f41af
Closes-Bug: #1795125
Having all services in one giant haproxy file makes altering
configuration for a service both painful and dangerous. Each service
should be configured with a simple set of variables and rendered with a
single unified template.
Available are two new templates:
* haproxy_single_service_listen.cfg.j2: close to the original style, but
only one service per file
* haproxy_single_service_split.cfg.j2: using the newer haproxy syntax
for separated frontend and backend
For now the default will be the single listen block, for ease of
transition.
Change-Id: I6e237438fbc0aa3c89a3c8bd706a53b74e71904b
Currently we only create the /volumes directory when
using the kolla-ansible bundled ceph. This extends the
functionality to external ceph.
Change-Id: I1e9a40e4ee893a53f04909ef7835be005c9b5276
Closes-Bug: #1778720
Now kolla dev mode only support clone master branch from git,
add version tag to support clone dedicated branch.
Change-Id: I88de238e5dc7461ba0662a3ecea9a2d80fd0db60
Option auth_uri from group keystone_authtoken is deprecated[1].
Use option www_authenticate_uri from group keystone_authtoken.
[1]https://review.openstack.org/#/c/508522/
Co-Authored-By: confi-surya <singh.surya64mnnit@gmail.com>
Change-Id: Ifd8527d404f1df807ae8196eac2b3849911ddc26
Closes-Bug: #1761907
This commit is to apply resource-constraints to a few more OpenStack services.
Commit to apply constraints to the last set of services will be made in
the upcoming commit.
Depends-on: Icafa54baca24d2de64238222a5677b9d8b90e2aa
Change-Id: I39004f54281f97d53dfa4b1dbcf248650ad6f186
Add a possibility to mount sources as volumes to containers,
in "more than documentation" way. That will let us to use kolla
as a replacement for devstack.
Partially implements: blueprint mount-sources
Change-Id: I4fe7bf54ad6aaeca75e1b56172a11bb6e00b1539
Add become to all tasks that use the module "kolla_docker"
Change-Id: I4309c4011687b88ec31d739fd8f834fe2326ff10
Partial-Implements: blueprint ansible-specific-task-become
- rename action and serial to kolla_ansible and kolla_serial
- use become instead of "sudo <command>" in shell
- Remove quota for failed_when and changed_when in rabbitmq tasks
Change-Id: I78cb60168aaa40bb6439198283546b7faf33917c
Implements: blueprint migrate-to-ansible-2-2-0
Some variables should be modified too, just like this commit:
https://review.openstack.org/552863
Change-Id: Id43eefb948a05de03d19c46048b6151bf6f5dc0a
Related-Bug: #1769463
If SSL is enabled, api of multiple services returns
wrong external URL without https prefix.
Removal of condition for deletion of http header.
Change-Id: I4264e04d0d6b9a3e11ef7dd7add6c5e166cf9fb4
Closes-Bug: #1749155
Closes-Bug: #1717491
If using the cephfs native backend, when container start the
manila-share process with the manila user, no permissions are
prompted when creating the volume.
One way to solve the problem is to create the volumes folder in
advance in cephfs and modify the owner and group to 42429:42429,
which is manila's uid and gid.
Change-Id: I1ad63e1c4698ec8ee83461aafefa63041cfeb387
Closes-Bug: #1761108
- remove uesless module_extra_vars, this is a historical issue. In the
past, we use 'docker exec kolla_toolbox ansible xxx' to run module on
target node, so complex data have to pass through extra_vars. Now we
are using kolla_toolbox module, no need to use extra_vars anymore.
- Remove some useless until.
Change-Id: I72ed28001202917f9a82a1c3ea33cd6319911ec8
Modify the permissions and owner of the ceph configuration file to be
consistent with other manila configuration files.
Change-Id: I9039196a1b26d74b313a02707dce8732a5e187cb
when non-root (become), the permission changed is necessary,
but some roles is missing, the patch to add it.
Change-Id: I987becde489f4b509b32edc1deceabfa2d2e1b74
This change allows the following use cases:
1. Using an already-configured MariaDB / MySQL server / Cluster
2. Using already-created DB users, without requiring root DB access.
Update: added external mariadb precheck
Change-Id: I78b0d178306d7c5293b0bf53e445f19f18b4b824
Implements: blueprint external-mariadb-support.
Closes-Bug: #1603121
through the database_address has beed defined in groups_vars/all.yml, we should
better use it, this way, if we want to use external database, we just need to
redefined in all.yml
refer to https://github.com/openstack/kolla-ansible/blob/master/ansible/group_vars/all.yml#L83
Co-Authored-By: chenqiaomin <chen.qiaomin@99cloud.net>
Change-Id: Ie559301451954e16347ceaabf02f594c5c5cbe56
This commit separates the messaging rpc and notify transports in order
to support separate and different oslo.messaging backends
This patch:
* add rpc and notify variables
* update service role conf templates
* add example to globals.yaml
* add release note
Implements: blueprint hybrid-messaging
Change-Id: I34691c2895c8563f1f322f0850ecff98d11b5185
When deploying with tls enabled in public
endpoints, ansible modules fails due SSL certificates
are self-signed.
This change adds a new variable to allow customization
on which endpoints ansible should connect.
Defaults to admin because admin auth parameters defaults
to admin endpoint.
Change-Id: Ic3ed58cf9c9579cae08a11bbfe6fce983b5a9cbc
Closes-Bug: #1720995
Actually Openstack services configuration can be overriden using many
files:
- /etc/kolla/config/<< service name >>/<< config file >>
- /etc/kolla/config/<< service name >>/<<host>>/<< config file >>
- /etc/kolla/config/global.conf
- /etc/kolla/config/database.conf
- /etc/kolla/config/messaging.conf
Only per-service configuration is actually documented here:
https://github.com/openstack/kolla-ansible/blob/master/doc/advanced-configuration.rst#L164
Allowing to globally modify service configuration can be perform too,
but it can be done in 3 different manners, all not documented:
- /etc/kolla/config/global.conf
- /etc/kolla/config/database.conf
- /etc/kolla/config/messaging.conf
database.conf and messaging.conf seems redundant with global.conf.
In order to simplify codebase it seems logical to remove them.
Documentation has been added for overriding configuration globally and
release note has been added too.
Closes-Bug: #1682479
Change-Id: I5d922dfc0d938173bad34ac64e490b78db1b7e31
