We get a nice optimisation by using a filtered loop instead
of task skipping per service with 'when'.
Partially-Implements: blueprint performance-improvements
Change-Id: I8f68100870ab90cb2d6b68a66a4c97df9ea4ff52
This patch is fixing docker healthcheck for horizon
by changing value of horizon_listen_port, so
both apache's virtualhost and healthcheck will have
same correct port always. Also removing useless
apache's redirect as all redirects are done on
haproxy side.
Closes-Bug: #1933846
Change-Id: Ibb5ad1a5d1bbc74bcb62610d77852d8124c4a323
By default, Ansible injects a variable for every fact, prefixed with
ansible_. This can result in a large number of variables for each host,
which at scale can incur a performance penalty. Ansible provides a
configuration option [0] that can be set to False to prevent this
injection of facts. In this case, facts should be referenced via
ansible_facts.<fact>.
This change updates all references to Ansible facts within Kolla Ansible
from using individual fact variables to using the items in the
ansible_facts dictionary. This allows users to disable fact variable
injection in their Ansible configuration, which may provide some
performance improvement.
This change disables fact variable injection in the ansible
configuration used in CI, to catch any attempts to use the injected
variables.
[0] https://docs.ansible.com/ansible/latest/reference_appendices/config.html#inject-facts-as-vars
Change-Id: I7e9d5c9b8b9164d4aee3abb4e37c8f28d98ff5d1
Partially-Implements: blueprint performance-improvements
This pull request adds support for the OpenID Connect authentication
flow in Keystone and enables both ID and access token authentication
flows. The ID token configuration is designed to allow users to
authenticate via Horizon using an identity federation; whereas the
Access token is used to allow users to authenticate in the OpenStack CLI
using a federated user.
Without this PR, if one wants to configure OpenStack to use identity
federation, he/she needs to do a lot of configurations in the keystone,
Horizon, and register quite a good number of different parameters using
the CLI such as mappings, identity providers, federated protocols, and
so on. Therefore, with this PR, we propose a method for operators to
introduce/present the IdP's metadata to Kolla-ansible, and based on the
presented metadata, Kolla-ansible takes care of all of the
configurations to prepare OpenStack to work in a federated environment.
Implements: blueprint add-openid-support
Co-Authored-By: Jason Anderson <jasonanderson@uchicago.edu>
Change-Id: I0203a3470d7f8f2a54d5e126d947f540d93b8210
This reverts commit 9cae59be51e8d2d798830042a5fd448a4aa5e7dc.
Reason for revert: This patch was found to introduce issues with fluentd customisation. The underlying issue is not currently fully understood, but could be a sign of other obscure issues.
Change-Id: Ia4859c23d85699621a3b734d6cedb70225576dfc
Closes-Bug: #1906288
Main plays are action-redirect-stubs, ideal for import_tasks.
This avoids 'include' penalty and makes logs/ara look nicer.
Fixes haproxy and rabbitmq not to check the host group as well.
Change-Id: I46136fc40b815e341befff80b54a91ef431eabc0
Partially-Implements: blueprint performance-improvements
Config plays do not need to check containers. This avoids skipping
tasks during the genconfig action.
Ironic and Glance rolling upgrades are handled specially.
Swift and Bifrost do not use the handlers at all.
Partially-Implements: blueprint performance-improvements
Change-Id: I140bf71d62e8f0932c96270d1f08940a5ba4542a
This change enables the use of Docker healthchecks for core OpenStack
services.
Also check-failures.sh has been updated to treat containers with
unhealthy status as failed.
Implements: blueprint container-health-check
Change-Id: I79c6b11511ce8af70f77e2f6a490b59b477fefbb
Including tasks has a performance penalty when compared with importing
tasks. If the include has a condition associated with it, then the
overhead of the include may be lower than the overhead of skipping all
imported tasks. For unconditionally included tasks, switching to
import_tasks provides a clear benefit.
Benchmarking of include vs. import is available at [1].
This change switches from include_tasks to import_tasks where there is
no condition applied to the include.
[1] https://github.com/stackhpc/ansible-scaling/blob/master/doc/include-and-import.md#task-include-and-import
Partially-Implements: blueprint performance-improvements
Change-Id: Ia45af4a198e422773d9f009c7f7b2e32ce9e3b97
It was found to be useless in [1].
It is one of distro_python_version usages.
Note Freezer and Horizon still use python_path (and hence
distro_python_version) for different purposes.
[1] https://review.opendev.org/675822
Change-Id: I6d6d9fdf4c28cb2b686d548955108c994b685bb1
Partially-Implements: blueprint drop-distro-python-version
The goal for this push request is to normalize the construction and use
of internal, external, and admin URLs. While extending Kolla-ansible
to enable a more flexible method to manage external URLs, we noticed
that the same URL was constructed multiple times in different parts
of the code. This can make it difficult for people that want to work
with these URLs and create inconsistencies in a large code base with
time. Therefore, we are proposing here the use of
"single Kolla-ansible variable" per endpoint URL, which facilitates
for people that are interested in overriding/extending these URLs.
As an example, we extended Kolla-ansible to facilitate the "override"
of public (external) URLs with the following standard
"<component/serviceName>.<companyBaseUrl>".
Therefore, the "NAT/redirect" in the SSL termination system (HAproxy,
HTTPD or some other) is done via the service name, and not by the port.
This allows operators to easily and automatically create more friendly
URL names. To develop this feature, we first applied this patch that
we are sending now to the community. We did that to reduce the surface
of changes in Kolla-ansible.
Another example is the integration of Kolla-ansible and Consul, which
we also implemented internally, and also requires URLs changes.
Therefore, this PR is essential to reduce code duplicity, and to
facility users/developers to work/customize the services URLs.
Change-Id: I73d483e01476e779a5155b2e18dd5ea25f514e93
Signed-off-by: Rafael Weingärtner <rafael@apache.org>
Backport to Ussuri unmodified. Backport to Train and Stein without
DEFAULT_BOOT_SOURCE.
Closes-Bug: #1891024
Change-Id: If8fe490c3f698ab3eb37735fbfcb8ab0d5fa8a06
Previously we mounted /etc/timezone if the kolla_base_distro is debian
or ubuntu. This would fail prechecks if debian or ubuntu images were
deployed on CentOS. While this is not a supported combination, for
correctness we should fix the condition to reference the host OS rather
than the container OS, since that is where the /etc/timezone file is
located.
Change-Id: Ifc252ae793e6974356fcdca810b373f362d24ba5
Closes-Bug: #1882553
Including tasks has a performance penalty when compared with importing
tasks. If the include has a condition associated with it, then the
overhead of the include may be lower than the overhead of skipping all
imported tasks. In the case of the check-containers.yml include, the
included file only has a single task, so the overhead of skipping this
task will not be greater than the overhead of the task import. It
therefore makes sense to switch to use import_tasks there.
Partially-Implements: blueprint performance-improvements
Change-Id: I65d911670649960708b9f6a4c110d1a7df1ad8f7
The common role was previously added as a dependency to all other roles.
It would set a fact after running on a host to avoid running twice. This
had the nice effect that deploying any service would automatically pull
in the common services for that host. When using tags, any services with
matching tags would also run the common role. This could be both
surprising and sometimes useful.
When using Ansible at large scale, there is a penalty associated with
executing a task against a large number of hosts, even if it is skipped.
The common role introduces some overhead, just in determining that it
has already run.
This change extracts the common role into a separate play, and removes
the dependency on it from all other roles. New groups have been added
for cron, fluentd, and kolla-toolbox, similar to other services. This
changes the behaviour in the following ways:
* The common role is now run for all hosts at the beginning, rather than
prior to their first enabled service
* Hosts must be in the necessary group for each of the common services
in order to have that service deployed. This is mostly to avoid
deploying on localhost or the deployment host
* If tags are specified for another service e.g. nova, the common role
will *not* automatically run for matching hosts. The common tag must
be specified explicitly
The last of these is probably the largest behaviour change. While it
would be possible to determine which hosts should automatically run the
common role, it would be quite complex, and would introduce some
overhead that would probably negate the benefit of splitting out the
common role.
Partially-Implements: blueprint performance-improvements
Change-Id: I6a4676bf6efeebc61383ec7a406db07c7a868b2a
non-root user has no permission to create directory under /opt
directory. use "become: true" to resolve it.
Change-Id: I155efc4b1e0691da0aaf6ef19ca709e9dc2d9168
STATIC_ROOT in local_settings.py should be configured
to path which is also configured in apache's config.
For debian, ubuntu binary setup it is
/var/lib/openstack-dashboard/static.
Reason why it is "accidentaly" working is:
For debian package:
Package is overriding STATIC_ROOT in
/etc/openstack-dashboard/local_settings.d/_0003_debian_static_root.py.
But this is going to be removed from settings in
https://review.opendev.org/733607.
For ubuntu package:
Ubuntu package is adding patch to package which is including
PYTHON_PATH do /usr/share/openstack-dashboard/
And also they are creating several dirty symlinks to get it working.
This patch is fixing this behaviour more clearly.
Change-Id: I9862ac7ab462ca9018b684d63f26458ddda9f73a
This patch introduces an optional backend encryption for Horizon and
Placement services. When used in conjunction with enabling TLS for
service API endpoints, network communcation will be encrypted end to
end, from client through HAProxy to the Horizon and Placement services.
Change-Id: I9cb274141c95aea20e733baa623da071b30acf2d
Partially-Implements: blueprint add-ssl-internal-network
The "balance" keyword is not valid in a frontend section. From the
HAProxy documentation[1]:
balance <algorithm> [ <arguments> ]
balance url_param <param> [check_post [<max_wait>]]
Define the load balancing algorithm to be used in a backend.
May be used in sections : defaults | frontend | listen | backend
yes | no | yes | yes
When running HAProxy using the "split" template style, where a
frontend/backend pair are used instead of one listen section, HAProxy
will emit warnings for the Horizon config due to this.
[1]: https://www.haproxy.org/download/1.5/doc/configuration.txt
Closes-Bug: #1872540
Change-Id: I91cee275d91a51944298618493f4ea0cd80282cc
Refactor service configuration to use the copy certificates task. This
reduces code duplication and simplifies implementing encrypting backend
HAProxy traffic for individual services.
Change-Id: I0474324b60a5f792ef5210ab336639edf7a8cd9e
Some services look for /etc/timezone on Debian/Ubuntu, so we should
introduce it to the containers.
In addition, added prechecks for /etc/localtime and /etc/timezone.
Closes-Bug: #1821592
Change-Id: I9fef14643d1bcc7eee9547eb87fa1fb436d8a6b3
Add copy ca file to horizon container.
because:
Could not find a suitable TLS CA certificate bundle,
invalid path: /etc/pki/ca-trust/source/anchors/kolla-customca-haproxy-internal.crt
Closes-Bug: #1867121
Change-Id: I64d4dbeebd53048705005b61eb3c5b2104e8f2ed
Signed-off-by: yj.bai <bai.yongjun@99cloud.net>
Both include_role and import_role expect role's name to be given
via "name" param instead of "role".
This worked but caused errors with ansible-lint.
See: https://review.opendev.org/694779
Change-Id: I388d4ae27111e430d38df1abcb6c6127d90a06e0
We assume that all groups are present in the inventory, and quite obtuse
errors can result if any are not.
This change adds a precheck that checks for the presence of all expected
groups in the inventory for each service. It also introduces a common
service-precheck role that we can use for other common prechecks.
Change-Id: Ia0af1e7df4fff7f07cd6530e5b017db8fba530b3
Partially-Implements: blueprint improve-prechecks
In dev mode currently the python source is mounted under python2.7
site-packages. This change fixes this to use the distro_python_version
variable to ensure dev mode works with Python 3 images.
Change-Id: Ieae3778a02f1b79023b4f1c20eff27b37f481077
Partially-Implements: blueprint python-3
For the CentOS 7 to 8 transition, we will have a period where both
CentOS 7 and 8 images are available. We differentiate these images via a
tag - the CentOS 8 images will have a tag of train-centos8 (or
master-centos8 temporarily).
To achieve this, and maintain backwards compatibility for the
openstack_release variable, we introduce a new 'openstack_tag' variable.
This variable is based on openstack_release, but has a suffix of
'openstack_tag_suffix', which is empty except on CentOS 8 where it has a
value of '-centos8'.
Change-Id: I12ce4661afb3c255136cdc1aabe7cbd25560d625
Partially-Implements: blueprint centos-rhel-8
