This change enables the use of Docker healthchecks for
keystone-fernet container. It checks if "key 0" has
right permissions, and if rsync is able to distribute
keys to other keystones.
Implements: blueprint container-health-check
Change-Id: I17bea723d4109e869cd05d211f6f8e4653f46e17
By default, Ansible injects a variable for every fact, prefixed with
ansible_. This can result in a large number of variables for each host,
which at scale can incur a performance penalty. Ansible provides a
configuration option [0] that can be set to False to prevent this
injection of facts. In this case, facts should be referenced via
ansible_facts.<fact>.
This change updates all references to Ansible facts within Kolla Ansible
from using individual fact variables to using the items in the
ansible_facts dictionary. This allows users to disable fact variable
injection in their Ansible configuration, which may provide some
performance improvement.
This change disables fact variable injection in the ansible
configuration used in CI, to catch any attempts to use the injected
variables.
[0] https://docs.ansible.com/ansible/latest/reference_appendices/config.html#inject-facts-as-vars
Change-Id: I7e9d5c9b8b9164d4aee3abb4e37c8f28d98ff5d1
Partially-Implements: blueprint performance-improvements
This pull request adds support for the OpenID Connect authentication
flow in Keystone and enables both ID and access token authentication
flows. The ID token configuration is designed to allow users to
authenticate via Horizon using an identity federation; whereas the
Access token is used to allow users to authenticate in the OpenStack CLI
using a federated user.
Without this PR, if one wants to configure OpenStack to use identity
federation, he/she needs to do a lot of configurations in the keystone,
Horizon, and register quite a good number of different parameters using
the CLI such as mappings, identity providers, federated protocols, and
so on. Therefore, with this PR, we propose a method for operators to
introduce/present the IdP's metadata to Kolla-ansible, and based on the
presented metadata, Kolla-ansible takes care of all of the
configurations to prepare OpenStack to work in a federated environment.
Implements: blueprint add-openid-support
Co-Authored-By: Jason Anderson <jasonanderson@uchicago.edu>
Change-Id: I0203a3470d7f8f2a54d5e126d947f540d93b8210
This change enables the use of Docker healthchecks for core OpenStack
services.
Also check-failures.sh has been updated to treat containers with
unhealthy status as failed.
Implements: blueprint container-health-check
Change-Id: I79c6b11511ce8af70f77e2f6a490b59b477fefbb
Previously we mounted /etc/timezone if the kolla_base_distro is debian
or ubuntu. This would fail prechecks if debian or ubuntu images were
deployed on CentOS. While this is not a supported combination, for
correctness we should fix the condition to reference the host OS rather
than the container OS, since that is where the /etc/timezone file is
located.
Change-Id: Ifc252ae793e6974356fcdca810b373f362d24ba5
Closes-Bug: #1882553
Some services look for /etc/timezone on Debian/Ubuntu, so we should
introduce it to the containers.
In addition, added prechecks for /etc/localtime and /etc/timezone.
Closes-Bug: #1821592
Change-Id: I9fef14643d1bcc7eee9547eb87fa1fb436d8a6b3
This patch introduces an optional backend encryption for Keystone
service. When used in conjunction with enabling TLS for service API
endpoints, network communcation will be encrypted end to end, from
client through HAProxy to the Keystone service.
Change-Id: I6351147ddaff8b2ae629179a9bc3bae2ebac9519
Partially-Implements: blueprint add-ssl-internal-network
In dev mode currently the python source is mounted under python2.7
site-packages. This change fixes this to use the distro_python_version
variable to ensure dev mode works with Python 3 images.
Change-Id: Ieae3778a02f1b79023b4f1c20eff27b37f481077
Partially-Implements: blueprint python-3
For the CentOS 7 to 8 transition, we will have a period where both
CentOS 7 and 8 images are available. We differentiate these images via a
tag - the CentOS 8 images will have a tag of train-centos8 (or
master-centos8 temporarily).
To achieve this, and maintain backwards compatibility for the
openstack_release variable, we introduce a new 'openstack_tag' variable.
This variable is based on openstack_release, but has a suffix of
'openstack_tag_suffix', which is empty except on CentOS 8 where it has a
value of '-centos8'.
Change-Id: I12ce4661afb3c255136cdc1aabe7cbd25560d625
Partially-Implements: blueprint centos-rhel-8
Introduce kolla_address filter.
Introduce put_address_in_context filter.
Add AF config to vars.
Address contexts:
- raw (default): <ADDR>
- memcache: inet6:[<ADDR>]
- url: [<ADDR>]
Other changes:
globals.yml - mention just IP in comment
prechecks/port_checks (api_intf) - kolla_address handles validation
3x interface conditional (swift configs: replication/storage)
2x interface variable definition with hostname
(haproxy listens; api intf)
1x interface variable definition with hostname with bifrost exclusion
(baremetal pre-install /etc/hosts; api intf)
neutron's ml2 'overlay_ip_version' set to 6 for IPv6 on tunnel network
basic multinode source CI job for IPv6
prechecks for rabbitmq and qdrouterd use proper NSS database now
MariaDB Galera Cluster WSREP SST mariabackup workaround
(socat and IPv6)
Ceph naming workaround in CI
TODO: probably needs documenting
RabbitMQ IPv6-only proto_dist
Ceph ms switch to IPv6 mode
Remove neutron-server ml2_type_vxlan/vxlan_group setting
as it is not used (let's avoid any confusion)
and could break setups without proper multicast routing
if it started working (also IPv4-only)
haproxy upgrade checks for slaves based on ipv6 addresses
TODO:
ovs-dpdk grabs ipv4 network address (w/ prefix len / submask)
not supported, invalid by default because neutron_external has no address
No idea whether ovs-dpdk works at all atm.
ml2 for xenapi
Xen is not supported too well.
This would require working with XenAPI facts.
rp_filter setting
This would require meddling with ip6tables (there is no sysctl param).
By default nothing is dropped.
Unlikely we really need it.
ironic dnsmasq is configured IPv4-only
dnsmasq needs DHCPv6 options and testing in vivo.
KNOWN ISSUES (beyond us):
One cannot use IPv6 address to reference the image for docker like we
currently do, see: https://github.com/moby/moby/issues/39033
(docker_registry; docker API 400 - invalid reference format)
workaround: use hostname/FQDN
RabbitMQ may fail to bind to IPv6 if hostname resolves also to IPv4.
This is due to old RabbitMQ versions available in images.
IPv4 is preferred by default and may fail in the IPv6-only scenario.
This should be no problem in real life as IPv6-only is indeed IPv6-only.
Also, when new RabbitMQ (3.7.16/3.8+) makes it into images, this will
no longer be relevant as we supply all the necessary config.
See: https://github.com/rabbitmq/rabbitmq-server/pull/1982
For reliable runs, at least Ansible 2.8 is required (2.8.5 confirmed
to work well). Older Ansible versions are known to miss IPv6 addresses
in interface facts. This may affect redeploys, reconfigures and
upgrades which run after VIP address is assigned.
See: https://github.com/ansible/ansible/issues/63227
Bifrost Train does not support IPv6 deployments.
See: https://storyboard.openstack.org/#!/story/2006689
Change-Id: Ia34e6916ea4f99e9522cd2ddde03a0a4776f7e2c
Implements: blueprint ipv6-control-plane
Signed-off-by: Radosław Piliszek <radoslaw.piliszek@gmail.com>
Use upstream Ansible modules for registration of services, endpoints,
users, projects, roles, and role grants.
Change-Id: I7c9138d422cc91c177fd8992347176bb54156b5a
After all of the discussions we had on
"https://review.opendev.org/#/c/670626/2", I studied all projects that
have an "oslo_messaging" section. Afterwards, I applied the same method
that is already used in "oslo_messaging" section in Nova, Cinder, and
others. This guarantees that we have a consistent method to
enable/disable notifications across projects based on components (e.g.
Ceilometer) being enabled or disabled. Here follows the list of
components, and the respective changes I did.
* Aodh:
The section is declared, but it is not used. Therefore, it will
be removed in an upcomming PR.
* Congress:
The section is declared, but it is not used. Therefore, it will
be removed in an upcomming PR.
* Cinder:
It was already properly configured.
* Octavia:
The section is declared, but it is not used. Therefore, it will
be removed in an upcomming PR.
* Heat:
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Ceilometer:
Ceilometer publishes some messages in the rabbitMQ. However, the
default driver is "messagingv2", and not ''(empty) as defined in Oslo;
these configurations are defined in ceilometer/publisher/messaging.py.
Therefore, we do not need to do anything for the
"oslo_messaging_notifications" section in Ceilometer
* Tacker:
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Neutron:
It was already properly configured.
* Nova
It was already properly configured. However, we found another issue
with its configuration. Kolla-ansible does not configure nova
notifications as it should. If 'searchlight' is not installed (enabled)
the 'notification_format' should be 'unversioned'. The default is
'both'; so nova will send a notification to the queue
versioned_notifications; but that queue has no consumer when
'searchlight' is disabled. In our case, the queue got 511k messages.
The huge amount of "stuck" messages made the Rabbitmq cluster
unstable.
https://bugzilla.redhat.com/show_bug.cgi?id=1478274https://bugs.launchpad.net/ceilometer/+bug/1665449
* Nova_hyperv:
I added the same configurations as in Nova project.
* Vitrage
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Searchlight
I created a mechanism similar to what we have in AODH, Cinder, Nova,
and others.
* Ironic
I created a mechanism similar to what we have in AODH, Cinder, Nova,
and others.
* Glance
It was already properly configured.
* Trove
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Blazar
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Sahara
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Watcher
I created a mechanism similar to what we have in AODH, Cinder, Nova,
and others.
* Barbican
I created a mechanism similar to what we have in Cinder, Nova,
and others. I also added a configuration to 'keystone_notifications'
section. Barbican needs its own queue to capture events from Keystone.
Otherwise, it has an impact on Ceilometer and other systems that are
connected to the "notifications" default queue.
* Keystone
Keystone is the system that triggered this work with the discussions
that followed on https://review.opendev.org/#/c/670626/2. After a long
discussion, we agreed to apply the same approach that we have in Nova,
Cinder and other systems in Keystone. That is what we did. Moreover, we
introduce a new topic "barbican_notifications" when barbican is
enabled. We also removed the "variable" enable_cadf_notifications, as
it is obsolete, and the default in Keystone is CADF.
* Mistral:
It was hardcoded "noop" as the driver. However, that does not seem a
good practice. Instead, I applied the same standard of using the driver
and pushing to "notifications" queue if Ceilometer is enabled.
* Cyborg:
I created a mechanism similar to what we have in AODH, Cinder, Nova,
and others.
* Murano
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Senlin
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Manila
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Zun
The section is declared, but it is not used. Therefore, it will
be removed in an upcomming PR.
* Designate
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Magnum
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
Closes-Bug: #1838985
Change-Id: I88bdb004814f37c81c9a9c4e5e491fac69f6f202
Signed-off-by: Rafael Weingärtner <rafael@apache.org>
When integrating 3rd party component into openstack with kolla-ansible,
maybe have to mount some extra volumes to container.
Change-Id: I69108209320edad4c4ffa37dabadff62d7340939
Implements: blueprint support-extra-volumes
This allows keystone service endpoints to use custom hostnames, and adds the
following variables:
* keystone_internal_fqdn
* keystone_external_fqdn
These default to the old values of kolla_internal_fqdn or
kolla_external_fqdn.
This also adds the following variables:
* keystone_admin_listen_port
* keystone_public_listen_port
These default to keystone_admin_port and keystone_public_port,
respectively, for backward compatibility.
These options allow the user to differentiate between the port the
service listens on, and the port the service is reachable on. This is
useful for external load balancers which live on the same host as the
service itself.
Change-Id: I50c46c674134f9958ee4357f0f4eed5483af2214
Implements: blueprint service-hostnames
Having all services in one giant haproxy file makes altering
configuration for a service both painful and dangerous. Each service
should be configured with a simple set of variables and rendered with a
single unified template.
Available are two new templates:
* haproxy_single_service_listen.cfg.j2: close to the original style, but
only one service per file
* haproxy_single_service_split.cfg.j2: using the newer haproxy syntax
for separated frontend and backend
For now the default will be the single listen block, for ease of
transition.
Change-Id: I6e237438fbc0aa3c89a3c8bd706a53b74e71904b
Now kolla dev mode only support clone master branch from git,
add version tag to support clone dedicated branch.
Change-Id: I88de238e5dc7461ba0662a3ecea9a2d80fd0db60
This commit is to apply resource-constraints to a few more OpenStack services.
Commit to apply constraints to the last set of services will be made in
the upcoming commit.
Depends-on: Icafa54baca24d2de64238222a5677b9d8b90e2aa
Change-Id: I39004f54281f97d53dfa4b1dbcf248650ad6f186
This change allows the following use cases:
1. Using an already-configured MariaDB / MySQL server / Cluster
2. Using already-created DB users, without requiring root DB access.
Update: added external mariadb precheck
Change-Id: I78b0d178306d7c5293b0bf53e445f19f18b4b824
Implements: blueprint external-mariadb-support.
Closes-Bug: #1603121
through the database_address has beed defined in groups_vars/all.yml, we should
better use it, this way, if we want to use external database, we just need to
redefined in all.yml
refer to https://github.com/openstack/kolla-ansible/blob/master/ansible/group_vars/all.yml#L83
Co-Authored-By: chenqiaomin <chen.qiaomin@99cloud.net>
Change-Id: Ie559301451954e16347ceaabf02f594c5c5cbe56
Provide support fot kolla dev mode in Keystone. When
'kolla_dev_mode' or 'keystone_dev_mode' variables are
enabled, source code of Keystone project is cloned
and bindmounted.
Partially implements: blueprint mount-sources
Change-Id: Ie4cf401ecd9a507e739a53dfdf16f65292ab57e5
In case Kolla's users want to deploy with both of
binary and source image, we should have a variable
install type that define install type for each project.
We also add specific image tag for each Openstack project.
This commit is implemented for Ironic, Kabor,
Keystone project and iscsi as well.
Change-Id: I134d840b1c0e24171a32dec0c7daa6dc2e9ecd87
Implements: blueprint mixing-binary-and-source-image
This addresses the ansible aspects of fernet key bootstrapping as
well as distributed key rotation.
- Bootstrapping is handled in the same way as keystone bootstrap.
- A new keystone-fernet and keystone-ssh container is created to allow
the nodes to communicate with each other (taken from nova-ssh).
- The keystone-fernet is a keystone container with crontab installed.
This will handle key rotations through keystone-manage and trigger
an rsync to push new tokens to other nodes.
- Key rotation is setup to be balanced across the keystone nodes using
a round-robbin style. This ensures that any node failures will not
stop the keys from rotating. This is configured by a desired token
expiration time which then determines the cron scheduling for each
node as well as the number of fernet tokens in rotation.
- Ability for recovered node to resync with the cluster. When a node
starts it will run sanity checks to ensure that its fernet tokens
are not stale. If they are it will rsync with other nodes to ensure
its tokens are up to date.
The Docker component is implemented in:
https://review.openstack.org/#/c/349366
Change-Id: I15052c25a1d1149d364236f10ced2e2346119738
Implements: blueprint keystone-fernet-token
Note: This should not result in any behavior changes in regular Kolla, just
Kolla-Kubernetes and only when you've overridden stuff in globals.yml
Allows override of interface address and memcached pools, so that Kubernetes
can do the right thing.
There are some significant architectural issues involved in memcached pooling
in the Kolla-kubernetes world. Avoiding them right now.
Current working with this Kolla-Kubernetes globals.yml file:
api_interface_address: "0.0.0.0"
memcached_servers: "memcached"
keystone_database_address: "mariadb"
keystone_admin_url: "http://keystone-admin:35357/v3"
keystone_internal_url: "http://keystone-public:5000/v3"
keystone_public_url: "http://keystone-public:5000/v3"
Three tings to note:
* In Kolla-Kubernetes, the service is not using net=host, so a
0.0.0.0 interface address is totally OK. That patch has been merged.
* In Kolla-Kubernetes, the global.yml file doesn't do var substitution
so you have to be explicit about the URLs, otherwise Keystone will
look like it was provisioned but it won't quite be provisioned right.
* In order to not duplicate tons of code, moved the keystone_admin_url /
keystone_internal_url / keystone_public_url to the common defaults
from the keystone defaults.
Co-Authored-By: Ryan Hallisey <rhallise@redhat.com>
Change-Id: I586ce1c6c3300254c4e2a398ff46645df576aeb0
Partially-implements: blueprint api-interface-bind-address-override
This change makes each step of the kolla deployment aware
of the port database was configured to listen on.
It defaults mariadb_port to database_port.
Change-Id: I8e85d5732015afc0a5481cb33e0b629fdfa84a1b
Closes-Bug: #1576151
DocImpact
After our switch to keystone-manage bootstrap Horizon is not happy
due to v3 not being setup correctly. This patch fixes that
This also includes removal of unused variables (transforms them into
endpoint url variables)
TrivialFix
Change-Id: I1e04db8c24049f80e974c063f03068a2ab32a563
Admin token has been deprecated upstream. It will be removed in O. We
switch over to the new `keystone-manage bootstrap` method for creating
the initial admin user, role, and project.
Co-Authored-By: Sam Yaple <sam@yaple.net>
Change-Id: I6ca90e8d4c3b71009e24b049b2efbc08c05ebfbf
Due to poor planning on our variable names we have a situation where
we have "internal_address" which must be a VIP, but "external_address"
which should be a DNS name. Now with two vips "external_vip_address"
is a new variable.
This corrects that issue by deprecating kolla_internal_address and
replacing it with 4 nicely named variables.
kolla_internal_vip_address
kolla_internal_fqdn
kolla_external_vip_address
kolla_external_fqdn
The default behaviour will remain the same, and the way the variable
inheritance is setup the kolla_internal_address variable can still be
set in globals.yml and propogate out to these 4 new variables like it
normally would, but all reference to kolla_internal_address has been
completely removed.
Change-Id: I4556dcdbf4d91a8d2751981ef9c64bad44a719e5
Partially-Implements: blueprint ssl-kolla
Create the admin project, user, role and keystone service info by
using ansible task rather than shell script
Closes-Bug: #1526251
Change-Id: Ieee215b9de1618b3d31f3d1a766a9d0ebafdee4d
This runs first sanity check for keystone. After keystone is deployed
it checks tenants.list()
Change-Id: Ie919ffe6124eb70428309404a434d9b0eb0b9f70
Partially-Implements: blueprint sanity-check-container
If user specifies registry a full image name is constructed by
concatenation of the registry, namespace and image. Currently
concatenation does not include '/' if registry is non-empty but
it should. If registry is empty '/' is not required.
This fix covers both use cases with help of Ansible filter.
Change-Id: I0588dd0da55d777e6caa7eb47d51b2435d38d5e0
Closes-Bug: #1479013
Add set_configs function that implements the flow from the proposed
ansible-multi spec. Move start.sh to config-internal.sh to preserve existing
behaviour.
config-externall.sh copies the appropriate configs in from the bind'd
location and sets permissions and ownership appropriately.
Partially Implements: blueprint ansible-multi
Change-Id: I53fca0660451087f273fefc3c63e0d8cf1a2c096
