This change enables the use of Docker healthchecks for gnocchi services.
Implements: blueprint container-health-check
Change-Id: Ib1eb766d061c376c0bdd693dd6ea1e5b3e3fc02a
This reverts commit 9cae59be51e8d2d798830042a5fd448a4aa5e7dc.
Reason for revert: This patch was found to introduce issues with fluentd customisation. The underlying issue is not currently fully understood, but could be a sign of other obscure issues.
Change-Id: Ia4859c23d85699621a3b734d6cedb70225576dfc
Closes-Bug: #1906288
Main plays are action-redirect-stubs, ideal for import_tasks.
This avoids 'include' penalty and makes logs/ara look nicer.
Fixes haproxy and rabbitmq not to check the host group as well.
Change-Id: I46136fc40b815e341befff80b54a91ef431eabc0
Partially-Implements: blueprint performance-improvements
Config plays do not need to check containers. This avoids skipping
tasks during the genconfig action.
Ironic and Glance rolling upgrades are handled specially.
Swift and Bifrost do not use the handlers at all.
Partially-Implements: blueprint performance-improvements
Change-Id: I140bf71d62e8f0932c96270d1f08940a5ba4542a
Including tasks has a performance penalty when compared with importing
tasks. If the include has a condition associated with it, then the
overhead of the include may be lower than the overhead of skipping all
imported tasks. In the case of the register.yml and bootstrap.yml
includes, all of the tasks in the included file use run_once: True.
The run_once flag improves performance at scale drastically, so
importing these tasks unconditionally will have a lower overhead than a
conditional include task. It therefore makes sense to switch to use
import_tasks there.
See [1] for benchmarks of run_once.
[1] https://github.com/stackhpc/ansible-scaling/blob/master/doc/run-once.md
Change-Id: Ic67631ca3ea3fb2081a6f8978e85b1522522d40d
Partially-Implements: blueprint performance-improvements
Including tasks has a performance penalty when compared with importing
tasks. If the include has a condition associated with it, then the
overhead of the include may be lower than the overhead of skipping all
imported tasks. For unconditionally included tasks, switching to
import_tasks provides a clear benefit.
Benchmarking of include vs. import is available at [1].
This change switches from include_tasks to import_tasks where there is
no condition applied to the include.
[1] https://github.com/stackhpc/ansible-scaling/blob/master/doc/include-and-import.md#task-include-and-import
Partially-Implements: blueprint performance-improvements
Change-Id: Ia45af4a198e422773d9f009c7f7b2e32ce9e3b97
Including tasks has a performance penalty when compared with importing
tasks. If the include has a condition associated with it, then the
overhead of the include may be lower than the overhead of skipping all
imported tasks. In the case of the check-containers.yml include, the
included file only has a single task, so the overhead of skipping this
task will not be greater than the overhead of the task import. It
therefore makes sense to switch to use import_tasks there.
Partially-Implements: blueprint performance-improvements
Change-Id: I65d911670649960708b9f6a4c110d1a7df1ad8f7
There are a number of tasks where we conditionally use include_tasks
with a condition, and the condition is always true. This change removes
these conditions, in preparation for switching unconditional task
includes to task imports.
Partially-Implements: blueprint performance-improvements
Change-Id: I3804c440fe3552950d9d434ef5409f685c39bbcf
Refactor service configuration to use the copy certificates task. This
reduces code duplication and simplifies implementing encrypting backend
HAProxy traffic for individual services.
Change-Id: I0474324b60a5f792ef5210ab336639edf7a8cd9e
When change the cert file in /etc/kolla/certificate/.
The certificate in the container has not changed.
So I think can use kolla-ansible deploy when certificate is
changed. restart <container>
Partially-Implements: blueprint custom-cacerts
Change-Id: Iaac6f37e85ffdc0352e8062ae5049cc9a6b3db26
Signed-off-by: yj.bai <bai.yongjun@99cloud.net>
Both include_role and import_role expect role's name to be given
via "name" param instead of "role".
This worked but caused errors with ansible-lint.
See: https://review.opendev.org/694779
Change-Id: I388d4ae27111e430d38df1abcb6c6127d90a06e0
We assume that all groups are present in the inventory, and quite obtuse
errors can result if any are not.
This change adds a precheck that checks for the presence of all expected
groups in the inventory for each service. It also introduces a common
service-precheck role that we can use for other common prechecks.
Change-Id: Ia0af1e7df4fff7f07cd6530e5b017db8fba530b3
Partially-Implements: blueprint improve-prechecks
Kolla-Ansible Ceph deployment mechanism has been deprecated in Train [1].
This change removes the Ansible code and associated CI jobs.
[1]: https://review.opendev.org/669214
Change-Id: Ie2167f02ad2f525d3b0f553e2c047516acf55bc2
When kolla_copy_ca_into_containers is set to "yes", the Certificate
Authority in /etc/kolla/certificates will be copied into service
containers to enable trust for that CA. This is especially useful when
the CA is self signed, and would not be trusted by default.
Partially-Implements: blueprint custom-cacerts
Change-Id: I4368f8994147580460ebe7533850cf63a419d0b4
Introduce user modifiable variables instead of fixed-names
of Ceph keyring files for external Ceph functionality.
Change-Id: I1a33b3f9d6eca5babf53b91187461e43aef865ce
As part of the effort to implement Ansible code linting in CI
(using ansible-lint) - we need to implement recommendations from
ansible-lint output [1].
One of them is to stop using local_action in favor of delegate_to -
to increase readability and and match the style of typical ansible
tasks.
[1]: https://review.opendev.org/694779/
Partially implements: blueprint ansible-lint
Change-Id: I46c259ddad5a6aaf9c7301e6c44cd8a1d5c457d3
Sometimes as cloud admins, we want to only update code that is running
in a cloud. But we dont need to do anything else. Make an action in
kolla-ansible that allows us to do that.
Change-Id: I904f595c69f7276e71692696471e32fd1f88e6e8
Implements: blueprint deploy-containers-action
Use upstream Ansible modules for registration of services, endpoints,
users, projects, roles, and role grants.
Change-Id: I7c9138d422cc91c177fd8992347176bb54156b5a
This commit adds the functionality for an operator to specify
their own trusted CA certificate file for interacting with the
Keystone API.
Implements: blueprint support-trusted-ca-certificate-file
Change-Id: I84f9897cc8e107658701fb309ec318c0f805883b
Docker has no restart policy named 'never'. It has 'no'.
This has bitten us already (see [1]) and might bite us again whenever
we want to change the restart policy to 'no'.
This patch makes our docker integration honor all valid restart policies
and only valid restart policies.
All relevant docker restart policy usages are patched as well.
I added some FIXMEs around which are relevant to kolla-ansible docker
integration. They are not fixed in here to not alter behavior.
[1] https://review.opendev.org/667363
Change-Id: I1c9764fb9bbda08a71186091aced67433ad4e3d6
Signed-off-by: Radosław Piliszek <radoslaw.piliszek@gmail.com>
A common class of problems goes like this:
* kolla-ansible deploy
* Hit a problem, often in ansible/roles/*/tasks/bootstrap.yml
* Re-run kolla-ansible deploy
* Service fails to start
This happens because the DB is created during the first run, but for some
reason we fail before performing the DB sync. This means that on the second run
we don't include ansible/roles/*/tasks/bootstrap_service.yml because the DB
already exists, and therefore still don't perform the DB sync. However this
time, the command may complete without apparent error.
We should be less careful about when we perform the DB sync, and do it whenever
it is necessary. There is an argument for not doing the sync during a
'reconfigure' command, although we will not change that here.
This change only always performs the DB sync during 'deploy' and
'reconfigure' commands.
Change-Id: I82d30f3fcf325a3fdff3c59f19a1f88055b566cc
Closes-Bug: #1823766
Closes-Bug: #1797814
Currently, we have a lot of logic for checking if a handler should run,
depending on whether config files have changed and whether the
container configuration has changed. As rm_work pointed out during
the recent haproxy refactor, these conditionals are typically
unnecessary - we can rely on Ansible's handler notification system
to only trigger handlers when they need to run. This removes a lot
of error prone code.
This patch removes conditional handler logic for all services. It is
important to ensure that we no longer trigger handlers when unnecessary,
because without these checks in place it will trigger a restart of the
containers.
Implements: blueprint simplify-handlers
Change-Id: I4f1aa03e9a9faaf8aecd556dfeafdb834042e4cd
Many tasks that use Docker have become specified already, but
not all. This change ensures all tasks that use the following
modules have become:
* kolla_docker
* kolla_ceph_keyring
* kolla_toolbox
* kolla_container_facts
It also adds become for 'command' tasks that use docker CLI.
Change-Id: I4a5ebcedaccb9261dbc958ec67e8077d7980e496
Several config file permissions are incorrect on the host. In general,
files should be 0660, and directories and executables 0770.
Change-Id: Id276ac1864f280554e98b937f2845bb424d521de
Closes-Bug: #1821579
This allows gnocchi service endpoints to use custom hostnames, and adds the
following variables:
* gnocchi_internal_fqdn
* gnocchi_external_fqdn
These default to the old values of kolla_internal_fqdn or
kolla_external_fqdn.
This also adds a gnocchi_api_listen_port option, which defaults to
gnocchi_api_port for backward compatibility.
This option allow the user to differentiate between the port the
service listens on, and the port the service is reachable on. This is
useful for external load balancers which live on the same host as the
service itself.
Change-Id: Ic9a0f8130b19ed77987f45fd0e824b82ea7a7328
Implements: blueprint service-hostnames
With this change, an operator may be able to stop a
service container without stopping all services in a host.
This change is the starting point to start
fast-forward upgrades support.
In next changes new flags will be introducced to disable
stop dataplane services during upgrades.
Change-Id: Ifde7a39d7d8596ef0d7405ecf1ac1d49a459d9ef
Implements: blueprint support-stop-containers
If upgrading the nova, cinder or manila services via 'kolla-ansible
upgrade', the Ceph config files are not generated. Users will expect
that these files are generated, to pull in any changes from their
configuration or the base kolla configuration.
This change moves Ceph tasks inside config.yml to ensure that they are
performed during deploy, reconfigure and upgrade. This has been done for
nova, cinder, gnocchi and manila - glance already does this.
Change-Id: Ic75692c2bcba9b81dee922ff6fbbccd160e7fa19
Closes-Bug: #1794275
Various ceph-related tasks were missing a 'become' that would allow them
to work as a non-root user. This seems to only cause a problem after an
initial deployment, perhaps due to the recursive ownership & permissions
changes at the end of the ceph.yml and external_ceph.yml files.
This change adds the necessary becomes.
Change-Id: I887c7b3bdef49db1dd1bf9e5bdbf5dc47b7f41af
Closes-Bug: #1795125
Having all services in one giant haproxy file makes altering
configuration for a service both painful and dangerous. Each service
should be configured with a simple set of variables and rendered with a
single unified template.
Available are two new templates:
* haproxy_single_service_listen.cfg.j2: close to the original style, but
only one service per file
* haproxy_single_service_split.cfg.j2: using the newer haproxy syntax
for separated frontend and backend
For now the default will be the single listen block, for ease of
transition.
Change-Id: I6e237438fbc0aa3c89a3c8bd706a53b74e71904b
This commit is to apply resource-constraints only to few OpenStack services.
Commit to apply constraints to other services will be made in coming commits.
Partially-Implements: blueprint resource-constraints
Change-Id: Icafa54baca24d2de64238222a5677b9d8b90e2aa
There is no need to load custom ceph.conf and keyring from different
folder for gnocchi components. Just load the files from
node_custom_config/gnocchi folder.
Depends-On: I379ff17856509c9321b86c13a72eacc18f5c1202
Change-Id: Id553dff274a29d82fb1b743437e3656d6f817e52
Add become to all tasks that use the module "kolla_docker"
Change-Id: I4309c4011687b88ec31d739fd8f834fe2326ff10
Partial-Implements: blueprint ansible-specific-task-become
- rename action and serial to kolla_ansible and kolla_serial
- use become instead of "sudo <command>" in shell
- Remove quota for failed_when and changed_when in rabbitmq tasks
Change-Id: I78cb60168aaa40bb6439198283546b7faf33917c
Implements: blueprint migrate-to-ansible-2-2-0
- remove uesless module_extra_vars, this is a historical issue. In the
past, we use 'docker exec kolla_toolbox ansible xxx' to run module on
target node, so complex data have to pass through extra_vars. Now we
are using kolla_toolbox module, no need to use extra_vars anymore.
- Remove some useless until.
Change-Id: I72ed28001202917f9a82a1c3ea33cd6319911ec8
