Check enable_* variables first, then check inventory_host in
group, will help to avoid configuration errors.
Change-Id: Icdb1f50e5c911203b92ac431723620756b15f3c6
Closes-Bug: #1648376
check_mode option is included in Ansible 2.2.
Using in our playbooks mean that any other version before
Ansible 2.2 can be used
This reverts commit 529f202d00e4615caa1fcb447aaa47fde6aa1417.
Change-Id: I3af96290443d760346264e6d994fd2a44de65543
Closes-Bug: #1644828
do_reconfigure.yml is introduced to use serial directive. But we use
it in wrong. Now serial has moved to playbook file. So it is time to
remove the do_reconfigure.yml file
Closes-Bug: #1628152
Change-Id: I8d42d27e6bc302a0e575b0353956eaef9b2ca9fd
When running kolla-ansible as non-root users the tmp files will
be created with become user as owner and mode 0600. This way the user
running kolla-ansible is not able to read the generated files. This
is necessary because of the use of the lookup method, which will
not run as become user.
TrivialFix
Change-Id: If86d114c05a9b2e7fa240718611d78e93100ebdf
Useful for upgrade etc., which is preferablly done serially.
Example usage: tools/kolla-ansible deploy OR tools/kolla-ansible upgrade
Closes-Bug: #1576708
DocImpact
Change-Id: I34b2e16f8ce53e472a4682a4738c4ac0f5abf00c
An unwitting user may apply the KOLLA_CEPH_OSD[_CACHE]_BOOTSTRAP label
to a partition assuming it will only use that partition for Ceph, and
end up wiping out their disk.
This change adds a layer of checking to this scenario to try and help
avoid a disaster scenario.
Closes-Bug: 1599103
DocImpact
Change-Id: Ibb9fb42f87a76bc02165ec0b93b60234bad8747a
The inventory_hostname is more reliable than ansible_hostname for the
way we use it here. If the deploy node cannot resolve the hostname of a
target node (the operator is using IP addresses in their inventory), the
bootstrap will fail with:
"Host: x.x.x.x, Task: ceph : Fetching Ceph keyrings, Status:
unreachable, Message: SSH Error: data could not be sent to the remote
host. Make sure this host can be reached over ssh"
Closes-Bug: 1599138
Change-Id: Ic76e4baf8c642c59bbe81e6671ac97bcbb57d470
The Ceph osd bootstrap/startup logic depends upon reading/writing
partition names. Some older versions of udev have trouble reading these
(/dev/disk/by-label is missing).
To work around this, we shell out to sgdisk and scrape the partition
name data directly.
Co-authored-by: Paul Bourke <paul.bourke@oracle.com>
Closes-Bug: 1585185
Change-Id: I362b3f8e91de79687fc84e256996fbcaf303b6af
The task names while bootstrapping Ceph OSDs and cache OSDs were
identical making them harder to distinguish in the Ansible output.
TrivialFix
Change-Id: I0228221a09bdaaba46b6280b6e1be9920ad13598
This will resolve the following deprecation warning:
Using bare variables is deprecated. Update your playbooks so
that the environment value uses the full variable syntax. This
feature will be removed in a future release.
Partial-bug: #1586404
Change-Id: I9086d3f9e7904836e72e6df2fefaa084e5229f7e
An operator may want to specify the location of custom config
files so that kolla can detect their location and merge
them with the default configs generated.
Partially implements: blueprint multi-project-config
Change-Id: Ibfb38d07a36dfa7fe25381adc34cc1d3cbe7d1e1
This allows us to specify external journals for osds which can greatly
improve performance when the external journals are on the solid-state
drives.
The new lookup and startup methods fix the previous races we had
preventing osds from being created properly.
This retains the same functionality as before and is completely
compatible with the previous method and labels, however this does set
new labels for all new bootstrap OSDs. This was due to a limitation
in the length of the name of a GPT partition.
Closes-Bug: #1558853
DocImpact
Partially-Implements: blueprint ceph-improvements
Change-Id: I61fd10cb35c67dabc53bd82270f26909ef51fc38
This type of per node configuration is required to support things like
availability zones for nova. As always, if this file doesnt exist it
doesnt get used so this change is safe.
TrivialFix
Change-Id: Iff8172af522c2c96e5f2c173b24a5dfd4d522ed2
This was an attempt to get storage_interface to work properly but that
work will not be completed and functional this cycle. There are design
topics that need to be discussed about it that were brought to light
by the RAX gate failing for it.
TrivialFix
Change-Id: I65579f9e0e0dcf3fa51c0ea031ff474145457c40
The storage hostname is used in many conf files all over the place and
should be registered upon each run for every service
TrivialFix
Change-Id: I1d5a20cb6d51cee9f529cf2e1fb144158f7718a9
Ceph is pretty easy to work with. Upgrade mons, then osds, then rgws
We want to eventually make these serial values configurable, but for
now due to cephs delicate distributed network nature it is safest to
only run 1 change at a time.
Change-Id: Icc721ab3651379c28fee853ca95f9e3ddf102998
Partially-Implements: blueprint upgrade-kolla
Implements: blueprint upgrade-ceph
This change is needed for clarity. We have a kolla-ansible script.
We have a kolla-mesos repo. We plan to have a kolla-ansible repo.
Already we have had far too much confusion about whether we are
talking about the container or the project. Naming this kolla-toolbox
eliminates all of that confusion and its probably a bit more accurate
of a name too.
Closes-Bug: #1541053
Change-Id: I8fd1f49d5a22b36ede5b10f46b9fe02ddda9007e
Add bootstrap label to all bootstrap containers to ensure that when
the a new container is launched a difference is seen between it and
the bootstrap container since we cannot rely on ENV variables for
this. This only affects mariadb at this stage, but it is needed to
ensure rabbitmq works when we switch to named volumes.
Change-Id: Ia022af26212d2e5445c06149848831037a508407
Closes-Bug: #1538136
Since the fetch script fetched _all_ keyrings from the ceph-mon
container, the ceph-mon container must contain all keyrings. This
setup works AIO but was broken on multinode because the ceph-mon
container did not have the radosgw keyring. This issue affects every
multinode install regardless of using the radosgw or not.
TrivialFix
Change-Id: Ie416de1a5275862da6d77ef0dd174e85e499fc0f
After introduction of pull action and turing every main.yml into
{{action}}.yml we lost ability to perform upgrade
Change-Id: Ie9fa2cd083b061033abc733fba53d54f9c55e393
Fixes-Bug: #1538210
Ceph-mon bootstrap container shares the same name of `ceph_mon` with
real ceph-mon service. When bootstrapping, it will sleep forever for the
purpose of distribute rings. Later on, when starting real `ceph_mon`
service, kolla_docker module will take bootstrap container as real one
because bootstrap container has a super set of env variables and
kolla_docker doesn't do strict comparing of env variable items.
This change follows the pattern of other bootstrap containers and rename
to use `bootstrap_ceph_mon` to avoid conflict.
Co-Authored-By: Sam Yaple <sam@yaple.net>
Change-Id: I0082820900928c42f9cc778ffd705980fea9ad1c
Closes-Bug: #1535140
After moving from data container to named volumes, ceph monmap detection
is broken. This change fix the logic by leverage kolla_docker's
idempotency creating a named volume.
Change-Id: Iabc2e2fe5f526e1a6fc2e1b1158d1702aaf4bdf9
Related-Bug: #1533368
This intentionally leaves out rabbitmq from this patchset. It will
require additional work to remove its data container
UpgradeImpact
Partially-Implements: blueprint docker-named-volumes
Change-Id: Id68b8e43a3c077ef4f4f4d67ea34d0692e66eef7
Convert config creation from a playbook to an action_plugin. This
reduces the complexity and confusion while retaining the same augment
structure and flexibility.
This allows us to remove the 0-byte files as requirements. They will
still be used if they are present (this means we require additional
documentation around them).
DocImpact
Closes-Bug: #1528430
Change-Id: I2c789f6be9f195c7771ca093a6d59499564b4740
Introduces a new flag to bootstrap cache devices
DocImpact
Partially-Implements: blueprint ceph-improvements
Change-Id: I09b5a0d5c61b3465237e5f01dc10120725561cd3
sudo requires a tty to function by default on centos. Instead of
tweaking the sudo conf we can just add a tty. This has the added
advantage of making the containers more friendly if you have to
`docker exec -i <container> bash` into them.
Change-Id: If97a02ca1d37c243a787d98ade54bde8d641aecd
backport: liberty
Partially-Implements: blueprint functional-testing-gate
Ansible 1.9.2 contains the fix needed for docker-py >1.2.0
This is needed for some gate reasons, but it is also a good version
bump because it fixes a few issues with delegate_to.
Change-Id: Iafbabb3b0232620849d0548c5cd9d8d316c2b0f3
backport: liberty
Partially-Implements: blueprint functional-testing-gate
This brings Kolla images inline with FHS and should make finding
locations of things more consistent and reliable with the linux world
at large.
Change-Id: Iece5b4da4bace0fb8b1f41a65ab2c852ec73e6f8
Closes-Bug: #1485742
