The internal FQDN assumes that HAProxy is set up to route traffic to the
DB; other services default to the value of database_address.
Change-Id: I9a333a89adfa4f620f211c831d659b8d52e307d5
This commit adds the functionality for an operator to specify
their own trusted CA certificate file for interacting with the
Keystone API.
Implements: blueprint support-trusted-ca-certificate-file
Change-Id: I84f9897cc8e107658701fb309ec318c0f805883b
After all of the discussions we had on
"https://review.opendev.org/#/c/670626/2", I studied all projects that
have an "oslo_messaging" section. Afterwards, I applied the same method
that is already used in "oslo_messaging" section in Nova, Cinder, and
others. This guarantees that we have a consistent method to
enable/disable notifications across projects based on components (e.g.
Ceilometer) being enabled or disabled. Here follows the list of
components, and the respective changes I did.
* Aodh:
The section is declared, but it is not used. Therefore, it will
be removed in an upcomming PR.
* Congress:
The section is declared, but it is not used. Therefore, it will
be removed in an upcomming PR.
* Cinder:
It was already properly configured.
* Octavia:
The section is declared, but it is not used. Therefore, it will
be removed in an upcomming PR.
* Heat:
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Ceilometer:
Ceilometer publishes some messages in the rabbitMQ. However, the
default driver is "messagingv2", and not ''(empty) as defined in Oslo;
these configurations are defined in ceilometer/publisher/messaging.py.
Therefore, we do not need to do anything for the
"oslo_messaging_notifications" section in Ceilometer
* Tacker:
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Neutron:
It was already properly configured.
* Nova
It was already properly configured. However, we found another issue
with its configuration. Kolla-ansible does not configure nova
notifications as it should. If 'searchlight' is not installed (enabled)
the 'notification_format' should be 'unversioned'. The default is
'both'; so nova will send a notification to the queue
versioned_notifications; but that queue has no consumer when
'searchlight' is disabled. In our case, the queue got 511k messages.
The huge amount of "stuck" messages made the Rabbitmq cluster
unstable.
https://bugzilla.redhat.com/show_bug.cgi?id=1478274https://bugs.launchpad.net/ceilometer/+bug/1665449
* Nova_hyperv:
I added the same configurations as in Nova project.
* Vitrage
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Searchlight
I created a mechanism similar to what we have in AODH, Cinder, Nova,
and others.
* Ironic
I created a mechanism similar to what we have in AODH, Cinder, Nova,
and others.
* Glance
It was already properly configured.
* Trove
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Blazar
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Sahara
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Watcher
I created a mechanism similar to what we have in AODH, Cinder, Nova,
and others.
* Barbican
I created a mechanism similar to what we have in Cinder, Nova,
and others. I also added a configuration to 'keystone_notifications'
section. Barbican needs its own queue to capture events from Keystone.
Otherwise, it has an impact on Ceilometer and other systems that are
connected to the "notifications" default queue.
* Keystone
Keystone is the system that triggered this work with the discussions
that followed on https://review.opendev.org/#/c/670626/2. After a long
discussion, we agreed to apply the same approach that we have in Nova,
Cinder and other systems in Keystone. That is what we did. Moreover, we
introduce a new topic "barbican_notifications" when barbican is
enabled. We also removed the "variable" enable_cadf_notifications, as
it is obsolete, and the default in Keystone is CADF.
* Mistral:
It was hardcoded "noop" as the driver. However, that does not seem a
good practice. Instead, I applied the same standard of using the driver
and pushing to "notifications" queue if Ceilometer is enabled.
* Cyborg:
I created a mechanism similar to what we have in AODH, Cinder, Nova,
and others.
* Murano
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Senlin
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Manila
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Zun
The section is declared, but it is not used. Therefore, it will
be removed in an upcomming PR.
* Designate
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Magnum
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
Closes-Bug: #1838985
Change-Id: I88bdb004814f37c81c9a9c4e5e491fac69f6f202
Signed-off-by: Rafael Weingärtner <rafael@apache.org>
Most other services already gate the DB bootstrap operations with the
'use_preconfigured_databases' variable; Blazar did not.
Change-Id: I772b1cb92612c7e6936f052ed9947f93582f264c
Docker has no restart policy named 'never'. It has 'no'.
This has bitten us already (see [1]) and might bite us again whenever
we want to change the restart policy to 'no'.
This patch makes our docker integration honor all valid restart policies
and only valid restart policies.
All relevant docker restart policy usages are patched as well.
I added some FIXMEs around which are relevant to kolla-ansible docker
integration. They are not fixed in here to not alter behavior.
[1] https://review.opendev.org/667363
Change-Id: I1c9764fb9bbda08a71186091aced67433ad4e3d6
Signed-off-by: Radosław Piliszek <radoslaw.piliszek@gmail.com>
A common class of problems goes like this:
* kolla-ansible deploy
* Hit a problem, often in ansible/roles/*/tasks/bootstrap.yml
* Re-run kolla-ansible deploy
* Service fails to start
This happens because the DB is created during the first run, but for some
reason we fail before performing the DB sync. This means that on the second run
we don't include ansible/roles/*/tasks/bootstrap_service.yml because the DB
already exists, and therefore still don't perform the DB sync. However this
time, the command may complete without apparent error.
We should be less careful about when we perform the DB sync, and do it whenever
it is necessary. There is an argument for not doing the sync during a
'reconfigure' command, although we will not change that here.
This change only always performs the DB sync during 'deploy' and
'reconfigure' commands.
Change-Id: I82d30f3fcf325a3fdff3c59f19a1f88055b566cc
Closes-Bug: #1823766
Closes-Bug: #1797814
Currently, we have a lot of logic for checking if a handler should run,
depending on whether config files have changed and whether the
container configuration has changed. As rm_work pointed out during
the recent haproxy refactor, these conditionals are typically
unnecessary - we can rely on Ansible's handler notification system
to only trigger handlers when they need to run. This removes a lot
of error prone code.
This patch removes conditional handler logic for all services. It is
important to ensure that we no longer trigger handlers when unnecessary,
because without these checks in place it will trigger a restart of the
containers.
Implements: blueprint simplify-handlers
Change-Id: I4f1aa03e9a9faaf8aecd556dfeafdb834042e4cd
Many tasks that use Docker have become specified already, but
not all. This change ensures all tasks that use the following
modules have become:
* kolla_docker
* kolla_ceph_keyring
* kolla_toolbox
* kolla_container_facts
It also adds become for 'command' tasks that use docker CLI.
Change-Id: I4a5ebcedaccb9261dbc958ec67e8077d7980e496
The Nova aggregate was always defaulting to some region (usually first
in the Keystone endpoint list) when registering the Nova aggregate for
Blazar. Add in a region override to ensure we are always writing to the
region being deployed.
Change-Id: I3f921ac51acab1b1020a459c07c755af7023e026
When integrating 3rd party component into openstack with kolla-ansible,
maybe have to mount some extra volumes to container.
Change-Id: I69108209320edad4c4ffa37dabadff62d7340939
Implements: blueprint support-extra-volumes
We're duplicating code to build the keystone URLs in nearly every
config, where we've already done it in group_vars. Replace the
redundancy with a variable that does the same thing.
Change-Id: I207d77870e2535c1cdcbc5eaf704f0448ac85a7a
With this change, an operator may be able to stop a
service container without stopping all services in a host.
This change is the starting point to start
fast-forward upgrades support.
In next changes new flags will be introducced to disable
stop dataplane services during upgrades.
Change-Id: Ifde7a39d7d8596ef0d7405ecf1ac1d49a459d9ef
Implements: blueprint support-stop-containers
Having all services in one giant haproxy file makes altering
configuration for a service both painful and dangerous. Each service
should be configured with a simple set of variables and rendered with a
single unified template.
Available are two new templates:
* haproxy_single_service_listen.cfg.j2: close to the original style, but
only one service per file
* haproxy_single_service_split.cfg.j2: using the newer haproxy syntax
for separated frontend and backend
For now the default will be the single listen block, for ease of
transition.
Change-Id: I6e237438fbc0aa3c89a3c8bd706a53b74e71904b
Now kolla dev mode only support clone master branch from git,
add version tag to support clone dedicated branch.
Change-Id: I88de238e5dc7461ba0662a3ecea9a2d80fd0db60
With the more recent versions of ansible, we should now use
"is" instead of the "|"
This should update it.
Change-Id: I6fba56fca182349972e8b0ee5452b37aa4090e0c
Option auth_uri from group keystone_authtoken is deprecated[1].
Use option www_authenticate_uri from group keystone_authtoken.
[1]https://review.openstack.org/#/c/508522/
Co-Authored-By: confi-surya <singh.surya64mnnit@gmail.com>
Change-Id: Ifd8527d404f1df807ae8196eac2b3849911ddc26
Closes-Bug: #1761907
This commit is to apply resource-constraints only to few OpenStack services.
Commit to apply constraints to other services will be made in coming commits.
Partially-Implements: blueprint resource-constraints
Change-Id: Icafa54baca24d2de64238222a5677b9d8b90e2aa
Provide support for kolla dev mode in blazar. When
'kolla_dev_mode' or 'blazar_dev_mode' variables are
enabled, source code of blazar project will be cloned
and mounted automatically
Partially implements: blueprint mount-sources
Change-Id: I50c5eb97be1123b76b1d42fbb25a0ecbaa2c1a44
In Ansible 2.3.0 when statements should not include jinja2 templating
delimiters such as {{ }} or {% %}
this ps fixes it
Change-Id: I33a42eb8184b77e78332caa2a255e0f251fdf9fc
Add become to all tasks that use the module "kolla_docker"
Change-Id: I4309c4011687b88ec31d739fd8f834fe2326ff10
Partial-Implements: blueprint ansible-specific-task-become
when deploy this project,it report an error "
blazar_policy_jsons" not found, which result in
faild. this ps to fix it
Change-Id: Ifa4c0f33642e355be8849f2298d4a73c5e6c602c
In change I78cb60168aaa40bb6439198283546b7faf33917c, action was changed
to kolla_action, and serial to kolla_serial, to avoid Ansible warnings
due to use of reserved keywords. In that change, some keywords were
missed, and some changes that were merged since then have not switched
to the new variables. This change fixes all current instances of those
issues.
Change-Id: I357dffdfcb2b405e280a962d366ee65eebf0a8d1
Implements: blueprint migrate-to-ansible-2-2-0
- remove uesless module_extra_vars, this is a historical issue. In the
past, we use 'docker exec kolla_toolbox ansible xxx' to run module on
target node, so complex data have to pass through extra_vars. Now we
are using kolla_toolbox module, no need to use extra_vars anymore.
- Remove some useless until.
Change-Id: I72ed28001202917f9a82a1c3ea33cd6319911ec8
Add ansible role to deploy blazar
Add nova filters to allow use of blazar
Change-Id: I6742ddc9a4736f256491dd0cfd31904fa8eb5652
Implements: blueprint blazar-ansible-role
