When running in check mode, some prechecks previously failed because
they use the command module which is silently not run in check mode.
Other prechecks were not running correctly in check mode due to e.g.
looking for a string in empty command output or not querying which
containers are running.
This change fixes these issues.
Closes-Bug: #2002657
Change-Id: I5219cb42c48d5444943a2d48106dc338aa08fa7c
Regularly, we experience issues in Kolla Ansible deployments because we
use wrong options in OpenStack configuration files. This is because
OpenStack services ignore unknown options. We also need to keep on top
of deprecated options that may be removed in the future. Integrating
oslo-config-validator into Kolla Ansible will greatly help.
Adds a shared role to run oslo-config-validator on each service. Takes
into account that services have multiple containers, and these may also
use multiple config files. Service roles are extended to use this shared
role. Executed with the new command ``kolla-ansible validate-config``.
Change-Id: Ic10b410fc115646d96d2ce39d9618e7c46cb3fbc
Second part of patchset:
https://review.opendev.org/c/openstack/kolla-ansible/+/799229/
in which was suggested to split patch into smaller ones.
THis change adds container_engine to module parameters
so when we introduce podman, kolla_toolbox can be used
for both engines.
Signed-off-by: Ivan Halomi <i.halomi@partner.samsung.com>
Co-authored-by: Martin Hiner <m.hiner@partner.samsung.com>
Change-Id: Ic2093aa9341a0cb36df8f340cf290d62437504ad
Second part of patchset:
https://review.opendev.org/c/openstack/kolla-ansible/+/799229/
in which was suggested to split patch into smaller ones.
This change adds container_engine variable to kolla_container_facts
module, this prepares module to be used with docker and podman as well
without further changes in roles.
Signed-off-by: Ivan Halomi <i.halomi@partner.samsung.com>
Co-authored-by: Martin Hiner <m.hiner@partner.samsung.com>
Change-Id: I9e8fa30646844ab4a288555f3aafdda345b3a118
This patch adds loadbalancer-config role
which is "wrapper" around haproxy-config
and proxysql-config role which will be added
in follow-up patches.
Change-Id: I64d41507317081e1860a94b9481a85c8d400797d
We get a nice optimisation by using a filtered loop instead
of task skipping per service with 'when'.
Partially-Implements: blueprint performance-improvements
Change-Id: I8f68100870ab90cb2d6b68a66a4c97df9ea4ff52
This change enables the use of Docker healthchecks for vitrage services.
Implements: blueprint container-health-check
Change-Id: Icd2a8471a08b737352cfe941b5d38b02ed3b19fe
This reverts commit 9cae59be51e8d2d798830042a5fd448a4aa5e7dc.
Reason for revert: This patch was found to introduce issues with fluentd customisation. The underlying issue is not currently fully understood, but could be a sign of other obscure issues.
Change-Id: Ia4859c23d85699621a3b734d6cedb70225576dfc
Closes-Bug: #1906288
Main plays are action-redirect-stubs, ideal for import_tasks.
This avoids 'include' penalty and makes logs/ara look nicer.
Fixes haproxy and rabbitmq not to check the host group as well.
Change-Id: I46136fc40b815e341befff80b54a91ef431eabc0
Partially-Implements: blueprint performance-improvements
Config plays do not need to check containers. This avoids skipping
tasks during the genconfig action.
Ironic and Glance rolling upgrades are handled specially.
Swift and Bifrost do not use the handlers at all.
Partially-Implements: blueprint performance-improvements
Change-Id: I140bf71d62e8f0932c96270d1f08940a5ba4542a
Including tasks has a performance penalty when compared with importing
tasks. If the include has a condition associated with it, then the
overhead of the include may be lower than the overhead of skipping all
imported tasks. In the case of the register.yml and bootstrap.yml
includes, all of the tasks in the included file use run_once: True.
The run_once flag improves performance at scale drastically, so
importing these tasks unconditionally will have a lower overhead than a
conditional include task. It therefore makes sense to switch to use
import_tasks there.
See [1] for benchmarks of run_once.
[1] https://github.com/stackhpc/ansible-scaling/blob/master/doc/run-once.md
Change-Id: Ic67631ca3ea3fb2081a6f8978e85b1522522d40d
Partially-Implements: blueprint performance-improvements
Including tasks has a performance penalty when compared with importing
tasks. If the include has a condition associated with it, then the
overhead of the include may be lower than the overhead of skipping all
imported tasks. For unconditionally included tasks, switching to
import_tasks provides a clear benefit.
Benchmarking of include vs. import is available at [1].
This change switches from include_tasks to import_tasks where there is
no condition applied to the include.
[1] https://github.com/stackhpc/ansible-scaling/blob/master/doc/include-and-import.md#task-include-and-import
Partially-Implements: blueprint performance-improvements
Change-Id: Ia45af4a198e422773d9f009c7f7b2e32ce9e3b97
Including tasks has a performance penalty when compared with importing
tasks. If the include has a condition associated with it, then the
overhead of the include may be lower than the overhead of skipping all
imported tasks. In the case of the check-containers.yml include, the
included file only has a single task, so the overhead of skipping this
task will not be greater than the overhead of the task import. It
therefore makes sense to switch to use import_tasks there.
Partially-Implements: blueprint performance-improvements
Change-Id: I65d911670649960708b9f6a4c110d1a7df1ad8f7
There are a number of tasks where we conditionally use include_tasks
with a condition, and the condition is always true. This change removes
these conditions, in preparation for switching unconditional task
includes to task imports.
Partially-Implements: blueprint performance-improvements
Change-Id: I3804c440fe3552950d9d434ef5409f685c39bbcf
non-root user has no permission to create directory under /opt
directory. use "become: true" to resolve it.
Change-Id: I155efc4b1e0691da0aaf6ef19ca709e9dc2d9168
Kolla Ansible was missing vitrage-persistor service
required by Vitrage for data storage.
Depends on fixing availability of Kolla image.
Change-Id: I8158ba66b8b624f6bcb89da9c990a30a68b7187b
Depends-On: Id5e143636f9a81e7294b775f3d8b9134bee58054
Closes-Bug: #1869319
Refactor service configuration to use the copy certificates task. This
reduces code duplication and simplifies implementing encrypting backend
HAProxy traffic for individual services.
Change-Id: I0474324b60a5f792ef5210ab336639edf7a8cd9e
When change the cert file in /etc/kolla/certificate/.
The certificate in the container has not changed.
So I think can use kolla-ansible deploy when certificate is
changed. restart <container>
Partially-Implements: blueprint custom-cacerts
Change-Id: Iaac6f37e85ffdc0352e8062ae5049cc9a6b3db26
Signed-off-by: yj.bai <bai.yongjun@99cloud.net>
Both include_role and import_role expect role's name to be given
via "name" param instead of "role".
This worked but caused errors with ansible-lint.
See: https://review.opendev.org/694779
Change-Id: I388d4ae27111e430d38df1abcb6c6127d90a06e0
We assume that all groups are present in the inventory, and quite obtuse
errors can result if any are not.
This change adds a precheck that checks for the presence of all expected
groups in the inventory for each service. It also introduces a common
service-precheck role that we can use for other common prechecks.
Change-Id: Ia0af1e7df4fff7f07cd6530e5b017db8fba530b3
Partially-Implements: blueprint improve-prechecks
When kolla_copy_ca_into_containers is set to "yes", the Certificate
Authority in /etc/kolla/certificates will be copied into service
containers to enable trust for that CA. This is especially useful when
the CA is self signed, and would not be trusted by default.
Partially-Implements: blueprint custom-cacerts
Change-Id: I4368f8994147580460ebe7533850cf63a419d0b4
As part of the effort to implement Ansible code linting in CI
(using ansible-lint) - we need to implement recommendations from
ansible-lint output [1].
One of them is to stop using local_action in favor of delegate_to -
to increase readability and and match the style of typical ansible
tasks.
[1]: https://review.opendev.org/694779/
Partially implements: blueprint ansible-lint
Change-Id: I46c259ddad5a6aaf9c7301e6c44cd8a1d5c457d3
Introduce kolla_address filter.
Introduce put_address_in_context filter.
Add AF config to vars.
Address contexts:
- raw (default): <ADDR>
- memcache: inet6:[<ADDR>]
- url: [<ADDR>]
Other changes:
globals.yml - mention just IP in comment
prechecks/port_checks (api_intf) - kolla_address handles validation
3x interface conditional (swift configs: replication/storage)
2x interface variable definition with hostname
(haproxy listens; api intf)
1x interface variable definition with hostname with bifrost exclusion
(baremetal pre-install /etc/hosts; api intf)
neutron's ml2 'overlay_ip_version' set to 6 for IPv6 on tunnel network
basic multinode source CI job for IPv6
prechecks for rabbitmq and qdrouterd use proper NSS database now
MariaDB Galera Cluster WSREP SST mariabackup workaround
(socat and IPv6)
Ceph naming workaround in CI
TODO: probably needs documenting
RabbitMQ IPv6-only proto_dist
Ceph ms switch to IPv6 mode
Remove neutron-server ml2_type_vxlan/vxlan_group setting
as it is not used (let's avoid any confusion)
and could break setups without proper multicast routing
if it started working (also IPv4-only)
haproxy upgrade checks for slaves based on ipv6 addresses
TODO:
ovs-dpdk grabs ipv4 network address (w/ prefix len / submask)
not supported, invalid by default because neutron_external has no address
No idea whether ovs-dpdk works at all atm.
ml2 for xenapi
Xen is not supported too well.
This would require working with XenAPI facts.
rp_filter setting
This would require meddling with ip6tables (there is no sysctl param).
By default nothing is dropped.
Unlikely we really need it.
ironic dnsmasq is configured IPv4-only
dnsmasq needs DHCPv6 options and testing in vivo.
KNOWN ISSUES (beyond us):
One cannot use IPv6 address to reference the image for docker like we
currently do, see: https://github.com/moby/moby/issues/39033
(docker_registry; docker API 400 - invalid reference format)
workaround: use hostname/FQDN
RabbitMQ may fail to bind to IPv6 if hostname resolves also to IPv4.
This is due to old RabbitMQ versions available in images.
IPv4 is preferred by default and may fail in the IPv6-only scenario.
This should be no problem in real life as IPv6-only is indeed IPv6-only.
Also, when new RabbitMQ (3.7.16/3.8+) makes it into images, this will
no longer be relevant as we supply all the necessary config.
See: https://github.com/rabbitmq/rabbitmq-server/pull/1982
For reliable runs, at least Ansible 2.8 is required (2.8.5 confirmed
to work well). Older Ansible versions are known to miss IPv6 addresses
in interface facts. This may affect redeploys, reconfigures and
upgrades which run after VIP address is assigned.
See: https://github.com/ansible/ansible/issues/63227
Bifrost Train does not support IPv6 deployments.
See: https://storyboard.openstack.org/#!/story/2006689
Change-Id: Ia34e6916ea4f99e9522cd2ddde03a0a4776f7e2c
Implements: blueprint ipv6-control-plane
Signed-off-by: Radosław Piliszek <radoslaw.piliszek@gmail.com>
Sometimes as cloud admins, we want to only update code that is running
in a cloud. But we dont need to do anything else. Make an action in
kolla-ansible that allows us to do that.
Change-Id: I904f595c69f7276e71692696471e32fd1f88e6e8
Implements: blueprint deploy-containers-action
Use upstream Ansible modules for registration of services, endpoints,
users, projects, roles, and role grants.
Change-Id: I7c9138d422cc91c177fd8992347176bb54156b5a
This commit adds the functionality for an operator to specify
their own trusted CA certificate file for interacting with the
Keystone API.
Implements: blueprint support-trusted-ca-certificate-file
Change-Id: I84f9897cc8e107658701fb309ec318c0f805883b
Docker has no restart policy named 'never'. It has 'no'.
This has bitten us already (see [1]) and might bite us again whenever
we want to change the restart policy to 'no'.
This patch makes our docker integration honor all valid restart policies
and only valid restart policies.
All relevant docker restart policy usages are patched as well.
I added some FIXMEs around which are relevant to kolla-ansible docker
integration. They are not fixed in here to not alter behavior.
[1] https://review.opendev.org/667363
Change-Id: I1c9764fb9bbda08a71186091aced67433ad4e3d6
Signed-off-by: Radosław Piliszek <radoslaw.piliszek@gmail.com>
A common class of problems goes like this:
* kolla-ansible deploy
* Hit a problem, often in ansible/roles/*/tasks/bootstrap.yml
* Re-run kolla-ansible deploy
* Service fails to start
This happens because the DB is created during the first run, but for some
reason we fail before performing the DB sync. This means that on the second run
we don't include ansible/roles/*/tasks/bootstrap_service.yml because the DB
already exists, and therefore still don't perform the DB sync. However this
time, the command may complete without apparent error.
We should be less careful about when we perform the DB sync, and do it whenever
it is necessary. There is an argument for not doing the sync during a
'reconfigure' command, although we will not change that here.
This change only always performs the DB sync during 'deploy' and
'reconfigure' commands.
Change-Id: I82d30f3fcf325a3fdff3c59f19a1f88055b566cc
Closes-Bug: #1823766
Closes-Bug: #1797814
Currently, we have a lot of logic for checking if a handler should run,
depending on whether config files have changed and whether the
container configuration has changed. As rm_work pointed out during
the recent haproxy refactor, these conditionals are typically
unnecessary - we can rely on Ansible's handler notification system
to only trigger handlers when they need to run. This removes a lot
of error prone code.
This patch removes conditional handler logic for all services. It is
important to ensure that we no longer trigger handlers when unnecessary,
because without these checks in place it will trigger a restart of the
containers.
Implements: blueprint simplify-handlers
Change-Id: I4f1aa03e9a9faaf8aecd556dfeafdb834042e4cd
Many tasks that use Docker have become specified already, but
not all. This change ensures all tasks that use the following
modules have become:
* kolla_docker
* kolla_ceph_keyring
* kolla_toolbox
* kolla_container_facts
It also adds become for 'command' tasks that use docker CLI.
Change-Id: I4a5ebcedaccb9261dbc958ec67e8077d7980e496
Make an early start on the TODOs for the Train cycle.
1. Remove the task that removes the vitrage_collector container, which
was added in the Stein cycle to clean up this container which is no
longer deployed.
2. Remove globals.yml configuration in CI to disable Heat for upgrade
jobs. Heat is now enabled in the previous release (Stein).
3. Remove the deprecated variable cinder_iscsi_helper, which was renamed
to cinder_target_helper in Stein.
Change-Id: I774bf395e0bdd4db9c20c6289a22cf059fa42e1a
Vitrage supports new Prometheus configuration now [1].
Kolla should allow user to configure this configuration
file.
[1] https://review.openstack.org/#/c/630514/
Change-Id: I84072d90b0342c6d460ee733ba646a5fb787faa9
Vitrage Collector service has been removed from Vitrage in change:
Ie713456b2df96e24d0b15d2362a666162bfb4300.
Change-Id: I45023940c1d2573bfed49d4ce3fac16ed2d559e4
Signed-off-by: Bartosz Zurkowski <b.zurkowski@samsung.com>
Co-Authored-By: Kien Nguyen <kiennt65@viettel.com.vn>
With this change, an operator may be able to stop a
service container without stopping all services in a host.
This change is the starting point to start
fast-forward upgrades support.
In next changes new flags will be introducced to disable
stop dataplane services during upgrades.
Change-Id: Ifde7a39d7d8596ef0d7405ecf1ac1d49a459d9ef
Implements: blueprint support-stop-containers
Having all services in one giant haproxy file makes altering
configuration for a service both painful and dangerous. Each service
should be configured with a simple set of variables and rendered with a
single unified template.
Available are two new templates:
* haproxy_single_service_listen.cfg.j2: close to the original style, but
only one service per file
* haproxy_single_service_split.cfg.j2: using the newer haproxy syntax
for separated frontend and backend
For now the default will be the single listen block, for ease of
transition.
Change-Id: I6e237438fbc0aa3c89a3c8bd706a53b74e71904b
Without this, kolla-ansible check fails with the following error:
Unable to retrieve file contents
Could not find or access '/path/to/kolla-ansible/ansible/check.yml'"}
Also adds the check command to the CI tests, to ensure that it does not
break again.
Change-Id: I9fc2f9999f55cb742ac3ac38579dcf26524a9fc7
Closes-Bug: #1790653
Now kolla dev mode only support clone master branch from git,
add version tag to support clone dedicated branch.
Change-Id: I88de238e5dc7461ba0662a3ecea9a2d80fd0db60
This commit is the final commit to apply resource-constraints
to all OpenStack services.
Depends-on: I39004f54281f97d53dfa4b1dbcf248650ad6f186
Change-Id: I072d69be9698be54775cb0ae286ea2b6ed78776c
Implements: blueprint resource-constraints
