Including tasks has a performance penalty when compared with importing
tasks. If the include has a condition associated with it, then the
overhead of the include may be lower than the overhead of skipping all
imported tasks. In the case of the check-containers.yml include, the
included file only has a single task, so the overhead of skipping this
task will not be greater than the overhead of the task import. It
therefore makes sense to switch to use import_tasks there.
Partially-Implements: blueprint performance-improvements
Change-Id: I65d911670649960708b9f6a4c110d1a7df1ad8f7
The common role was previously added as a dependency to all other roles.
It would set a fact after running on a host to avoid running twice. This
had the nice effect that deploying any service would automatically pull
in the common services for that host. When using tags, any services with
matching tags would also run the common role. This could be both
surprising and sometimes useful.
When using Ansible at large scale, there is a penalty associated with
executing a task against a large number of hosts, even if it is skipped.
The common role introduces some overhead, just in determining that it
has already run.
This change extracts the common role into a separate play, and removes
the dependency on it from all other roles. New groups have been added
for cron, fluentd, and kolla-toolbox, similar to other services. This
changes the behaviour in the following ways:
* The common role is now run for all hosts at the beginning, rather than
prior to their first enabled service
* Hosts must be in the necessary group for each of the common services
in order to have that service deployed. This is mostly to avoid
deploying on localhost or the deployment host
* If tags are specified for another service e.g. nova, the common role
will *not* automatically run for matching hosts. The common tag must
be specified explicitly
The last of these is probably the largest behaviour change. While it
would be possible to determine which hosts should automatically run the
common role, it would be quite complex, and would introduce some
overhead that would probably negate the benefit of splitting out the
common role.
Partially-Implements: blueprint performance-improvements
Change-Id: I6a4676bf6efeebc61383ec7a406db07c7a868b2a
There are a number of tasks where we conditionally use include_tasks
with a condition, and the condition is always true. This change removes
these conditions, in preparation for switching unconditional task
includes to task imports.
Partially-Implements: blueprint performance-improvements
Change-Id: I3804c440fe3552950d9d434ef5409f685c39bbcf
The etcd service protocol is currently configured with internal_protocol.
The etcd service is not load balanced by a HAProxy container, so
there is no proxy layer to do TLS termination when internal_protocol
is configured to be "https".
Until the etcd service is configured to deploy with native TLS
termination, the etcd uses should be independent of
internal_protocol, and "http" by default.
Change-Id: I730c02331514244e44004aa06e9399c01264c65d
Closes-Bug: 1884137
Update Skydive Analyzer's configuration to use Keystone as its backend
for authenticating users. Any user with a role in the project defined
by the variable skydive_admin_tenant_name will be able to access
Skydive.
Change-Id: I64c811d5eb72c7406fd52b649fa00edaf2d0c07b
Closes-Bug: 1870903
Refactor service configuration to use the copy certificates task. This
reduces code duplication and simplifies implementing encrypting backend
HAProxy traffic for individual services.
Change-Id: I0474324b60a5f792ef5210ab336639edf7a8cd9e
Some services look for /etc/timezone on Debian/Ubuntu, so we should
introduce it to the containers.
In addition, added prechecks for /etc/localtime and /etc/timezone.
Closes-Bug: #1821592
Change-Id: I9fef14643d1bcc7eee9547eb87fa1fb436d8a6b3
When change the cert file in /etc/kolla/certificate/.
The certificate in the container has not changed.
So I think can use kolla-ansible deploy when certificate is
changed. restart <container>
Partially-Implements: blueprint custom-cacerts
Change-Id: Iaac6f37e85ffdc0352e8062ae5049cc9a6b3db26
Signed-off-by: yj.bai <bai.yongjun@99cloud.net>
Both include_role and import_role expect role's name to be given
via "name" param instead of "role".
This worked but caused errors with ansible-lint.
See: https://review.opendev.org/694779
Change-Id: I388d4ae27111e430d38df1abcb6c6127d90a06e0
We assume that all groups are present in the inventory, and quite obtuse
errors can result if any are not.
This change adds a precheck that checks for the presence of all expected
groups in the inventory for each service. It also introduces a common
service-precheck role that we can use for other common prechecks.
Change-Id: Ia0af1e7df4fff7f07cd6530e5b017db8fba530b3
Partially-Implements: blueprint improve-prechecks
When kolla_copy_ca_into_containers is set to "yes", the Certificate
Authority in /etc/kolla/certificates will be copied into service
containers to enable trust for that CA. This is especially useful when
the CA is self signed, and would not be trusted by default.
Partially-Implements: blueprint custom-cacerts
Change-Id: I4368f8994147580460ebe7533850cf63a419d0b4
For the CentOS 7 to 8 transition, we will have a period where both
CentOS 7 and 8 images are available. We differentiate these images via a
tag - the CentOS 8 images will have a tag of train-centos8 (or
master-centos8 temporarily).
To achieve this, and maintain backwards compatibility for the
openstack_release variable, we introduce a new 'openstack_tag' variable.
This variable is based on openstack_release, but has a suffix of
'openstack_tag_suffix', which is empty except on CentOS 8 where it has a
value of '-centos8'.
Change-Id: I12ce4661afb3c255136cdc1aabe7cbd25560d625
Partially-Implements: blueprint centos-rhel-8
Introduce kolla_address filter.
Introduce put_address_in_context filter.
Add AF config to vars.
Address contexts:
- raw (default): <ADDR>
- memcache: inet6:[<ADDR>]
- url: [<ADDR>]
Other changes:
globals.yml - mention just IP in comment
prechecks/port_checks (api_intf) - kolla_address handles validation
3x interface conditional (swift configs: replication/storage)
2x interface variable definition with hostname
(haproxy listens; api intf)
1x interface variable definition with hostname with bifrost exclusion
(baremetal pre-install /etc/hosts; api intf)
neutron's ml2 'overlay_ip_version' set to 6 for IPv6 on tunnel network
basic multinode source CI job for IPv6
prechecks for rabbitmq and qdrouterd use proper NSS database now
MariaDB Galera Cluster WSREP SST mariabackup workaround
(socat and IPv6)
Ceph naming workaround in CI
TODO: probably needs documenting
RabbitMQ IPv6-only proto_dist
Ceph ms switch to IPv6 mode
Remove neutron-server ml2_type_vxlan/vxlan_group setting
as it is not used (let's avoid any confusion)
and could break setups without proper multicast routing
if it started working (also IPv4-only)
haproxy upgrade checks for slaves based on ipv6 addresses
TODO:
ovs-dpdk grabs ipv4 network address (w/ prefix len / submask)
not supported, invalid by default because neutron_external has no address
No idea whether ovs-dpdk works at all atm.
ml2 for xenapi
Xen is not supported too well.
This would require working with XenAPI facts.
rp_filter setting
This would require meddling with ip6tables (there is no sysctl param).
By default nothing is dropped.
Unlikely we really need it.
ironic dnsmasq is configured IPv4-only
dnsmasq needs DHCPv6 options and testing in vivo.
KNOWN ISSUES (beyond us):
One cannot use IPv6 address to reference the image for docker like we
currently do, see: https://github.com/moby/moby/issues/39033
(docker_registry; docker API 400 - invalid reference format)
workaround: use hostname/FQDN
RabbitMQ may fail to bind to IPv6 if hostname resolves also to IPv4.
This is due to old RabbitMQ versions available in images.
IPv4 is preferred by default and may fail in the IPv6-only scenario.
This should be no problem in real life as IPv6-only is indeed IPv6-only.
Also, when new RabbitMQ (3.7.16/3.8+) makes it into images, this will
no longer be relevant as we supply all the necessary config.
See: https://github.com/rabbitmq/rabbitmq-server/pull/1982
For reliable runs, at least Ansible 2.8 is required (2.8.5 confirmed
to work well). Older Ansible versions are known to miss IPv6 addresses
in interface facts. This may affect redeploys, reconfigures and
upgrades which run after VIP address is assigned.
See: https://github.com/ansible/ansible/issues/63227
Bifrost Train does not support IPv6 deployments.
See: https://storyboard.openstack.org/#!/story/2006689
Change-Id: Ia34e6916ea4f99e9522cd2ddde03a0a4776f7e2c
Implements: blueprint ipv6-control-plane
Signed-off-by: Radosław Piliszek <radoslaw.piliszek@gmail.com>
Sometimes as cloud admins, we want to only update code that is running
in a cloud. But we dont need to do anything else. Make an action in
kolla-ansible that allows us to do that.
Change-Id: I904f595c69f7276e71692696471e32fd1f88e6e8
Implements: blueprint deploy-containers-action
This allows the install type for the project to be different than
kolla_install_type
This can be used to avoid hitting bug 1786238, since kuryr only supports
the source type.
Change-Id: I2b6fc85bac092b1614bccfd22bee48442c55dda4
Closes-Bug: #1786238
Currently, we have a lot of logic for checking if a handler should run,
depending on whether config files have changed and whether the
container configuration has changed. As rm_work pointed out during
the recent haproxy refactor, these conditionals are typically
unnecessary - we can rely on Ansible's handler notification system
to only trigger handlers when they need to run. This removes a lot
of error prone code.
This patch removes conditional handler logic for all services. It is
important to ensure that we no longer trigger handlers when unnecessary,
because without these checks in place it will trigger a restart of the
containers.
Implements: blueprint simplify-handlers
Change-Id: I4f1aa03e9a9faaf8aecd556dfeafdb834042e4cd
We don't add extra volumes support for all services in patch [1].
In order to unify the management of the volume, so we need add extra volumes
support for these services.
[1] 12ff28a693
Change-Id: Ie148accdd8e6c60df6b521d55bda12b850c0d255
Partially-Implements: blueprint support-extra-volumes
Signed-off-by: ZijianGuo <guozijn@gmail.com>
Many tasks that use Docker have become specified already, but
not all. This change ensures all tasks that use the following
modules have become:
* kolla_docker
* kolla_ceph_keyring
* kolla_toolbox
* kolla_container_facts
It also adds become for 'command' tasks that use docker CLI.
Change-Id: I4a5ebcedaccb9261dbc958ec67e8077d7980e496
With this change, an operator may be able to stop a
service container without stopping all services in a host.
This change is the starting point to start
fast-forward upgrades support.
In next changes new flags will be introducced to disable
stop dataplane services during upgrades.
Change-Id: Ifde7a39d7d8596ef0d7405ecf1ac1d49a459d9ef
Implements: blueprint support-stop-containers
Having all services in one giant haproxy file makes altering
configuration for a service both painful and dangerous. Each service
should be configured with a simple set of variables and rendered with a
single unified template.
Available are two new templates:
* haproxy_single_service_listen.cfg.j2: close to the original style, but
only one service per file
* haproxy_single_service_split.cfg.j2: using the newer haproxy syntax
for separated frontend and backend
For now the default will be the single listen block, for ease of
transition.
Change-Id: I6e237438fbc0aa3c89a3c8bd706a53b74e71904b
This commit is the final commit to apply resource-constraints
to all OpenStack services.
Depends-on: I39004f54281f97d53dfa4b1dbcf248650ad6f186
Change-Id: I072d69be9698be54775cb0ae286ea2b6ed78776c
Implements: blueprint resource-constraints
Skydive recently splitted the OpenStack configuration:
one for the authentication - on the analyzer - 'auth.keystone'
and an other one for the Neutron probe on the agent
'agent.topology.neutron'.
Change-Id: Idce277d30f01e7a36499b1aee24c54779c54a807
Add become to all tasks that use the module "kolla_docker"
Change-Id: I4309c4011687b88ec31d739fd8f834fe2326ff10
Partial-Implements: blueprint ansible-specific-task-become
- rename action and serial to kolla_ansible and kolla_serial
- use become instead of "sudo <command>" in shell
- Remove quota for failed_when and changed_when in rabbitmq tasks
Change-Id: I78cb60168aaa40bb6439198283546b7faf33917c
Implements: blueprint migrate-to-ansible-2-2-0
This patchset implements yamllint test to all *.yml
files.
Also fixes syntax errors to make jobs to pass.
Change-Id: I3186adf9835b4d0cada272d156b17d1bc9c2b799
Skydive does not receive information about ovs flows
Fixed some other issue:
- Add logic to use skydive with odl
- Useless config folder.
- Missing auth parm in analyzer conf.
- Set internal endpoint for connection to keystone.
- Remove stderr which consumes a lot of disk space in the host.
Change-Id: I4f7287f7453a6c5b6b8d77d746281b175d421bed
Closes-Bug: #1711336
when mapping file from host to container, if the file doesn't exist, it
will become a folder. So map folder rather than file.
Change-Id: I053ff11d32948711c0e4c3241f56d1f6210348ac
Closes-Bug: #1720189
The flowtable_expire, flowtable_update and flowtable_agent_ratio
are no longer use in skydive
Now it uses flow.expire and flow.update
Closes-Bug: #1714900
Change-Id: I4f7724be87997fe9e62e53e3141419709fd4efaf
This access is now mandatory for skydive.
It allows to add netns info to the topology, and to
attach interfaces to their netns if needed.
Closes-Bug: #1710627
Change-Id: I41cc1fd0fdeae0757a2c4e3e310ec6375da0b8cf
