This commit adds the functionality for an operator to specify
their own trusted CA certificate file for interacting with the
Keystone API.
Implements: blueprint support-trusted-ca-certificate-file
Change-Id: I84f9897cc8e107658701fb309ec318c0f805883b
After all of the discussions we had on
"https://review.opendev.org/#/c/670626/2", I studied all projects that
have an "oslo_messaging" section. Afterwards, I applied the same method
that is already used in "oslo_messaging" section in Nova, Cinder, and
others. This guarantees that we have a consistent method to
enable/disable notifications across projects based on components (e.g.
Ceilometer) being enabled or disabled. Here follows the list of
components, and the respective changes I did.
* Aodh:
The section is declared, but it is not used. Therefore, it will
be removed in an upcomming PR.
* Congress:
The section is declared, but it is not used. Therefore, it will
be removed in an upcomming PR.
* Cinder:
It was already properly configured.
* Octavia:
The section is declared, but it is not used. Therefore, it will
be removed in an upcomming PR.
* Heat:
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Ceilometer:
Ceilometer publishes some messages in the rabbitMQ. However, the
default driver is "messagingv2", and not ''(empty) as defined in Oslo;
these configurations are defined in ceilometer/publisher/messaging.py.
Therefore, we do not need to do anything for the
"oslo_messaging_notifications" section in Ceilometer
* Tacker:
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Neutron:
It was already properly configured.
* Nova
It was already properly configured. However, we found another issue
with its configuration. Kolla-ansible does not configure nova
notifications as it should. If 'searchlight' is not installed (enabled)
the 'notification_format' should be 'unversioned'. The default is
'both'; so nova will send a notification to the queue
versioned_notifications; but that queue has no consumer when
'searchlight' is disabled. In our case, the queue got 511k messages.
The huge amount of "stuck" messages made the Rabbitmq cluster
unstable.
https://bugzilla.redhat.com/show_bug.cgi?id=1478274https://bugs.launchpad.net/ceilometer/+bug/1665449
* Nova_hyperv:
I added the same configurations as in Nova project.
* Vitrage
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Searchlight
I created a mechanism similar to what we have in AODH, Cinder, Nova,
and others.
* Ironic
I created a mechanism similar to what we have in AODH, Cinder, Nova,
and others.
* Glance
It was already properly configured.
* Trove
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Blazar
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Sahara
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Watcher
I created a mechanism similar to what we have in AODH, Cinder, Nova,
and others.
* Barbican
I created a mechanism similar to what we have in Cinder, Nova,
and others. I also added a configuration to 'keystone_notifications'
section. Barbican needs its own queue to capture events from Keystone.
Otherwise, it has an impact on Ceilometer and other systems that are
connected to the "notifications" default queue.
* Keystone
Keystone is the system that triggered this work with the discussions
that followed on https://review.opendev.org/#/c/670626/2. After a long
discussion, we agreed to apply the same approach that we have in Nova,
Cinder and other systems in Keystone. That is what we did. Moreover, we
introduce a new topic "barbican_notifications" when barbican is
enabled. We also removed the "variable" enable_cadf_notifications, as
it is obsolete, and the default in Keystone is CADF.
* Mistral:
It was hardcoded "noop" as the driver. However, that does not seem a
good practice. Instead, I applied the same standard of using the driver
and pushing to "notifications" queue if Ceilometer is enabled.
* Cyborg:
I created a mechanism similar to what we have in AODH, Cinder, Nova,
and others.
* Murano
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Senlin
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Manila
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Zun
The section is declared, but it is not used. Therefore, it will
be removed in an upcomming PR.
* Designate
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Magnum
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
Closes-Bug: #1838985
Change-Id: I88bdb004814f37c81c9a9c4e5e491fac69f6f202
Signed-off-by: Rafael Weingärtner <rafael@apache.org>
Docker has no restart policy named 'never'. It has 'no'.
This has bitten us already (see [1]) and might bite us again whenever
we want to change the restart policy to 'no'.
This patch makes our docker integration honor all valid restart policies
and only valid restart policies.
All relevant docker restart policy usages are patched as well.
I added some FIXMEs around which are relevant to kolla-ansible docker
integration. They are not fixed in here to not alter behavior.
[1] https://review.opendev.org/667363
Change-Id: I1c9764fb9bbda08a71186091aced67433ad4e3d6
Signed-off-by: Radosław Piliszek <radoslaw.piliszek@gmail.com>
A common class of problems goes like this:
* kolla-ansible deploy
* Hit a problem, often in ansible/roles/*/tasks/bootstrap.yml
* Re-run kolla-ansible deploy
* Service fails to start
This happens because the DB is created during the first run, but for some
reason we fail before performing the DB sync. This means that on the second run
we don't include ansible/roles/*/tasks/bootstrap_service.yml because the DB
already exists, and therefore still don't perform the DB sync. However this
time, the command may complete without apparent error.
We should be less careful about when we perform the DB sync, and do it whenever
it is necessary. There is an argument for not doing the sync during a
'reconfigure' command, although we will not change that here.
This change only always performs the DB sync during 'deploy' and
'reconfigure' commands.
Change-Id: I82d30f3fcf325a3fdff3c59f19a1f88055b566cc
Closes-Bug: #1823766
Closes-Bug: #1797814
Currently, we have a lot of logic for checking if a handler should run,
depending on whether config files have changed and whether the
container configuration has changed. As rm_work pointed out during
the recent haproxy refactor, these conditionals are typically
unnecessary - we can rely on Ansible's handler notification system
to only trigger handlers when they need to run. This removes a lot
of error prone code.
This patch removes conditional handler logic for all services. It is
important to ensure that we no longer trigger handlers when unnecessary,
because without these checks in place it will trigger a restart of the
containers.
Implements: blueprint simplify-handlers
Change-Id: I4f1aa03e9a9faaf8aecd556dfeafdb834042e4cd
Many tasks that use Docker have become specified already, but
not all. This change ensures all tasks that use the following
modules have become:
* kolla_docker
* kolla_ceph_keyring
* kolla_toolbox
* kolla_container_facts
It also adds become for 'command' tasks that use docker CLI.
Change-Id: I4a5ebcedaccb9261dbc958ec67e8077d7980e496
When integrating 3rd party component into openstack with kolla-ansible,
maybe have to mount some extra volumes to container.
Change-Id: I69108209320edad4c4ffa37dabadff62d7340939
Implements: blueprint support-extra-volumes
We're duplicating code to build the keystone URLs in nearly every
config, where we've already done it in group_vars. Replace the
redundancy with a variable that does the same thing.
Change-Id: I207d77870e2535c1cdcbc5eaf704f0448ac85a7a
Use "{{ node_config_directory }}/murano-api/" for `murano-api` and
"{{ node_config_directory }}/murano-engine/" for `murano-engine`, so
correct `config.json` are mounted in containers.
Change-Id: I824ff00f6b86aac3eab5dc6fd01728653b4661d1
Closes-Bug: 1811716
With this change, an operator may be able to stop a
service container without stopping all services in a host.
This change is the starting point to start
fast-forward upgrades support.
In next changes new flags will be introducced to disable
stop dataplane services during upgrades.
Change-Id: Ifde7a39d7d8596ef0d7405ecf1ac1d49a459d9ef
Implements: blueprint support-stop-containers
Having all services in one giant haproxy file makes altering
configuration for a service both painful and dangerous. Each service
should be configured with a simple set of variables and rendered with a
single unified template.
Available are two new templates:
* haproxy_single_service_listen.cfg.j2: close to the original style, but
only one service per file
* haproxy_single_service_split.cfg.j2: using the newer haproxy syntax
for separated frontend and backend
For now the default will be the single listen block, for ease of
transition.
Change-Id: I6e237438fbc0aa3c89a3c8bd706a53b74e71904b
Now kolla dev mode only support clone master branch from git,
add version tag to support clone dedicated branch.
Change-Id: I88de238e5dc7461ba0662a3ecea9a2d80fd0db60
With the more recent versions of ansible, we should now use
"is" instead of the "|"
This should update it.
Change-Id: I6fba56fca182349972e8b0ee5452b37aa4090e0c
Option auth_uri from group keystone_authtoken is deprecated[1].
Use option www_authenticate_uri from group keystone_authtoken.
[1]https://review.openstack.org/#/c/508522/
Co-Authored-By: confi-surya <singh.surya64mnnit@gmail.com>
Change-Id: Ifd8527d404f1df807ae8196eac2b3849911ddc26
Closes-Bug: #1761907
This commit is to apply resource-constraints to a few more OpenStack services.
Commit to apply constraints to the last set of services will be made in
the upcoming commit.
Depends-on: Icafa54baca24d2de64238222a5677b9d8b90e2aa
Change-Id: I39004f54281f97d53dfa4b1dbcf248650ad6f186
Some Murano applications require much longer time than default
1 hour to be deployed.
Change-Id: I395e9e3e8cccf70f316f313847648841822e639a
Closes-Bug: #1777670
Add become to all tasks that use the module "kolla_docker"
Change-Id: I4309c4011687b88ec31d739fd8f834fe2326ff10
Partial-Implements: blueprint ansible-specific-task-become
When execute upgrade action, no need to create endpoint and
project again. This PS to remove register.yml from upgrade.yml
Change-Id: I0c453aa7214752fd6782521c64d462153396b05a
- rename action and serial to kolla_ansible and kolla_serial
- use become instead of "sudo <command>" in shell
- Remove quota for failed_when and changed_when in rabbitmq tasks
Change-Id: I78cb60168aaa40bb6439198283546b7faf33917c
Implements: blueprint migrate-to-ansible-2-2-0
Setting endpoint_type to internalURL in the murano config allows murano
to work properly when using self-signed certificates.
Change-Id: I5873f92994d790d597ec5e97163bbf8001c362b9
If SSL is enabled, api of multiple services returns
wrong external URL without https prefix.
Removal of condition for deletion of http header.
Change-Id: I4264e04d0d6b9a3e11ef7dd7add6c5e166cf9fb4
Closes-Bug: #1749155
Closes-Bug: #1717491
- remove uesless module_extra_vars, this is a historical issue. In the
past, we use 'docker exec kolla_toolbox ansible xxx' to run module on
target node, so complex data have to pass through extra_vars. Now we
are using kolla_toolbox module, no need to use extra_vars anymore.
- Remove some useless until.
Change-Id: I72ed28001202917f9a82a1c3ea33cd6319911ec8
Add the new murano_auth section to the Murano config
file so that Murano will deploy application packages.
Change-Id: I8ea7264759742e7af038b4cec346fc7ef7f7edcb
Murano failed to deploy due to outdated options - it tried to
issue v2.0 Keystone requests instead of v3. With new options that
are similar to other projects deployment succeeds.
Change-Id: I1970641e47fa6f94c2c6427ef49b3160d64c33ed
Closes-Bug: #1750373
This change allows the following use cases:
1. Using an already-configured MariaDB / MySQL server / Cluster
2. Using already-created DB users, without requiring root DB access.
Update: added external mariadb precheck
Change-Id: I78b0d178306d7c5293b0bf53e445f19f18b4b824
Implements: blueprint external-mariadb-support.
Closes-Bug: #1603121
through the database_address has beed defined in groups_vars/all.yml, we should
better use it, this way, if we want to use external database, we just need to
redefined in all.yml
refer to https://github.com/openstack/kolla-ansible/blob/master/ansible/group_vars/all.yml#L83
Co-Authored-By: chenqiaomin <chen.qiaomin@99cloud.net>
Change-Id: Ie559301451954e16347ceaabf02f594c5c5cbe56
This commit separates the messaging rpc and notify transports in order
to support separate and different oslo.messaging backends
This patch:
* add rpc and notify variables
* update service role conf templates
* add example to globals.yaml
* add release note
Implements: blueprint hybrid-messaging
Change-Id: I34691c2895c8563f1f322f0850ecff98d11b5185
In case of external router internal VIP and external VIP are the
same. External router manages port/address redirection from
public network to OpenStack API. The address of the router is
set via 'kolla_external_fqdn'. Currently Murano configuration
that is handed over to Murano application instance uses
'kolla_external_vip_address'. This leads to the instance trying
to connect to internal API network. Correct address should be
'kolla_external_fqdn' which will work in both cases - either with
double VIP setup or with single VIP + external router.
Change-Id: I78c38ae0af1cecd2be2b1c6cc86bcfc51b847082
Closes-Bug: #1729611
This applications package is useful to have in place,
import io.murano.applications along with the core package.
Change-Id: I819eebe2deae2d1ff0375a2dd39a33f50817bb83
When deploying with tls enabled in public
endpoints, ansible modules fails due SSL certificates
are self-signed.
This change adds a new variable to allow customization
on which endpoints ansible should connect.
Defaults to admin because admin auth parameters defaults
to admin endpoint.
Change-Id: Ic3ed58cf9c9579cae08a11bbfe6fce983b5a9cbc
Closes-Bug: #1720995
1. optimize the conmmand format
2. Update the "--os-auth-url", use the {{ keystone_admin_url }}
since it be defined in all.yml
Change-Id: I53278a7b1c43a021eafbd10842355a4c70c47116
Actually Openstack services configuration can be overriden using many
files:
- /etc/kolla/config/<< service name >>/<< config file >>
- /etc/kolla/config/<< service name >>/<<host>>/<< config file >>
- /etc/kolla/config/global.conf
- /etc/kolla/config/database.conf
- /etc/kolla/config/messaging.conf
Only per-service configuration is actually documented here:
https://github.com/openstack/kolla-ansible/blob/master/doc/advanced-configuration.rst#L164
Allowing to globally modify service configuration can be perform too,
but it can be done in 3 different manners, all not documented:
- /etc/kolla/config/global.conf
- /etc/kolla/config/database.conf
- /etc/kolla/config/messaging.conf
database.conf and messaging.conf seems redundant with global.conf.
In order to simplify codebase it seems logical to remove them.
Documentation has been added for overriding configuration globally and
release note has been added too.
Closes-Bug: #1682479
Change-Id: I5d922dfc0d938173bad34ac64e490b78db1b7e31
