Changes name of ansible module kolla_docker to
kolla_container.
Change-Id: I13c676ed0378aa721a21a1300f6054658ad12bc7
Signed-off-by: Martin Hiner <m.hiner@partner.samsung.com>
When running in check mode, some prechecks previously failed because
they use the command module which is silently not run in check mode.
Other prechecks were not running correctly in check mode due to e.g.
looking for a string in empty command output or not querying which
containers are running.
This change fixes these issues.
Closes-Bug: #2002657
Change-Id: I5219cb42c48d5444943a2d48106dc338aa08fa7c
Regularly, we experience issues in Kolla Ansible deployments because we
use wrong options in OpenStack configuration files. This is because
OpenStack services ignore unknown options. We also need to keep on top
of deprecated options that may be removed in the future. Integrating
oslo-config-validator into Kolla Ansible will greatly help.
Adds a shared role to run oslo-config-validator on each service. Takes
into account that services have multiple containers, and these may also
use multiple config files. Service roles are extended to use this shared
role. Executed with the new command ``kolla-ansible validate-config``.
Change-Id: Ic10b410fc115646d96d2ce39d9618e7c46cb3fbc
Second part of patchset:
https://review.opendev.org/c/openstack/kolla-ansible/+/799229/
in which was suggested to split patch into smaller ones.
This change adds container_engine variable to kolla_container_facts
module, this prepares module to be used with docker and podman as well
without further changes in roles.
Signed-off-by: Ivan Halomi <i.halomi@partner.samsung.com>
Co-authored-by: Martin Hiner <m.hiner@partner.samsung.com>
Change-Id: I9e8fa30646844ab4a288555f3aafdda345b3a118
MariaDB is left unchanged because its custom_member_list uses a
different group (mariadb_default_database_shard_hosts).
Change-Id: Icefd5a3d02ae4dfeb27401696c35ca2c38e203d3
This patch adds loadbalancer-config role
which is "wrapper" around haproxy-config
and proxysql-config role which will be added
in follow-up patches.
Change-Id: I64d41507317081e1860a94b9481a85c8d400797d
Role vars have a higher precedence than role defaults. This allows to
import default vars from another role via vars_files without overriding
project_name (see related bug for details).
Change-Id: I3d919736e53d6f3e1a70d1267cf42c8d2c0ad221
Related-Bug: #1951785
We get a nice optimisation by using a filtered loop instead
of task skipping per service with 'when'.
Partially-Implements: blueprint performance-improvements
Change-Id: I8f68100870ab90cb2d6b68a66a4c97df9ea4ff52
By default, Ansible injects a variable for every fact, prefixed with
ansible_. This can result in a large number of variables for each host,
which at scale can incur a performance penalty. Ansible provides a
configuration option [0] that can be set to False to prevent this
injection of facts. In this case, facts should be referenced via
ansible_facts.<fact>.
This change updates all references to Ansible facts within Kolla Ansible
from using individual fact variables to using the items in the
ansible_facts dictionary. This allows users to disable fact variable
injection in their Ansible configuration, which may provide some
performance improvement.
This change disables fact variable injection in the ansible
configuration used in CI, to catch any attempts to use the injected
variables.
[0] https://docs.ansible.com/ansible/latest/reference_appendices/config.html#inject-facts-as-vars
Change-Id: I7e9d5c9b8b9164d4aee3abb4e37c8f28d98ff5d1
Partially-Implements: blueprint performance-improvements
This change enables the use of Docker healthchecks for memcached services.
Implements: blueprint container-health-check
Change-Id: I571e6d6cac634fd86429e12b946d6f7b4a2ab02c
This reverts commit 9cae59be51e8d2d798830042a5fd448a4aa5e7dc.
Reason for revert: This patch was found to introduce issues with fluentd customisation. The underlying issue is not currently fully understood, but could be a sign of other obscure issues.
Change-Id: Ia4859c23d85699621a3b734d6cedb70225576dfc
Closes-Bug: #1906288
Main plays are action-redirect-stubs, ideal for import_tasks.
This avoids 'include' penalty and makes logs/ara look nicer.
Fixes haproxy and rabbitmq not to check the host group as well.
Change-Id: I46136fc40b815e341befff80b54a91ef431eabc0
Partially-Implements: blueprint performance-improvements
Config plays do not need to check containers. This avoids skipping
tasks during the genconfig action.
Ironic and Glance rolling upgrades are handled specially.
Swift and Bifrost do not use the handlers at all.
Partially-Implements: blueprint performance-improvements
Change-Id: I140bf71d62e8f0932c96270d1f08940a5ba4542a
Including tasks has a performance penalty when compared with importing
tasks. If the include has a condition associated with it, then the
overhead of the include may be lower than the overhead of skipping all
imported tasks. For unconditionally included tasks, switching to
import_tasks provides a clear benefit.
Benchmarking of include vs. import is available at [1].
This change switches from include_tasks to import_tasks where there is
no condition applied to the include.
[1] https://github.com/stackhpc/ansible-scaling/blob/master/doc/include-and-import.md#task-include-and-import
Partially-Implements: blueprint performance-improvements
Change-Id: Ia45af4a198e422773d9f009c7f7b2e32ce9e3b97
Previously we mounted /etc/timezone if the kolla_base_distro is debian
or ubuntu. This would fail prechecks if debian or ubuntu images were
deployed on CentOS. While this is not a supported combination, for
correctness we should fix the condition to reference the host OS rather
than the container OS, since that is where the /etc/timezone file is
located.
Change-Id: Ifc252ae793e6974356fcdca810b373f362d24ba5
Closes-Bug: #1882553
Including tasks has a performance penalty when compared with importing
tasks. If the include has a condition associated with it, then the
overhead of the include may be lower than the overhead of skipping all
imported tasks. In the case of the check-containers.yml include, the
included file only has a single task, so the overhead of skipping this
task will not be greater than the overhead of the task import. It
therefore makes sense to switch to use import_tasks there.
Partially-Implements: blueprint performance-improvements
Change-Id: I65d911670649960708b9f6a4c110d1a7df1ad8f7
Some services look for /etc/timezone on Debian/Ubuntu, so we should
introduce it to the containers.
In addition, added prechecks for /etc/localtime and /etc/timezone.
Closes-Bug: #1821592
Change-Id: I9fef14643d1bcc7eee9547eb87fa1fb436d8a6b3
Both include_role and import_role expect role's name to be given
via "name" param instead of "role".
This worked but caused errors with ansible-lint.
See: https://review.opendev.org/694779
Change-Id: I388d4ae27111e430d38df1abcb6c6127d90a06e0
We assume that all groups are present in the inventory, and quite obtuse
errors can result if any are not.
This change adds a precheck that checks for the presence of all expected
groups in the inventory for each service. It also introduces a common
service-precheck role that we can use for other common prechecks.
Change-Id: Ia0af1e7df4fff7f07cd6530e5b017db8fba530b3
Partially-Implements: blueprint improve-prechecks
For the CentOS 7 to 8 transition, we will have a period where both
CentOS 7 and 8 images are available. We differentiate these images via a
tag - the CentOS 8 images will have a tag of train-centos8 (or
master-centos8 temporarily).
To achieve this, and maintain backwards compatibility for the
openstack_release variable, we introduce a new 'openstack_tag' variable.
This variable is based on openstack_release, but has a suffix of
'openstack_tag_suffix', which is empty except on CentOS 8 where it has a
value of '-centos8'.
Change-Id: I12ce4661afb3c255136cdc1aabe7cbd25560d625
Partially-Implements: blueprint centos-rhel-8
Introduce kolla_address filter.
Introduce put_address_in_context filter.
Add AF config to vars.
Address contexts:
- raw (default): <ADDR>
- memcache: inet6:[<ADDR>]
- url: [<ADDR>]
Other changes:
globals.yml - mention just IP in comment
prechecks/port_checks (api_intf) - kolla_address handles validation
3x interface conditional (swift configs: replication/storage)
2x interface variable definition with hostname
(haproxy listens; api intf)
1x interface variable definition with hostname with bifrost exclusion
(baremetal pre-install /etc/hosts; api intf)
neutron's ml2 'overlay_ip_version' set to 6 for IPv6 on tunnel network
basic multinode source CI job for IPv6
prechecks for rabbitmq and qdrouterd use proper NSS database now
MariaDB Galera Cluster WSREP SST mariabackup workaround
(socat and IPv6)
Ceph naming workaround in CI
TODO: probably needs documenting
RabbitMQ IPv6-only proto_dist
Ceph ms switch to IPv6 mode
Remove neutron-server ml2_type_vxlan/vxlan_group setting
as it is not used (let's avoid any confusion)
and could break setups without proper multicast routing
if it started working (also IPv4-only)
haproxy upgrade checks for slaves based on ipv6 addresses
TODO:
ovs-dpdk grabs ipv4 network address (w/ prefix len / submask)
not supported, invalid by default because neutron_external has no address
No idea whether ovs-dpdk works at all atm.
ml2 for xenapi
Xen is not supported too well.
This would require working with XenAPI facts.
rp_filter setting
This would require meddling with ip6tables (there is no sysctl param).
By default nothing is dropped.
Unlikely we really need it.
ironic dnsmasq is configured IPv4-only
dnsmasq needs DHCPv6 options and testing in vivo.
KNOWN ISSUES (beyond us):
One cannot use IPv6 address to reference the image for docker like we
currently do, see: https://github.com/moby/moby/issues/39033
(docker_registry; docker API 400 - invalid reference format)
workaround: use hostname/FQDN
RabbitMQ may fail to bind to IPv6 if hostname resolves also to IPv4.
This is due to old RabbitMQ versions available in images.
IPv4 is preferred by default and may fail in the IPv6-only scenario.
This should be no problem in real life as IPv6-only is indeed IPv6-only.
Also, when new RabbitMQ (3.7.16/3.8+) makes it into images, this will
no longer be relevant as we supply all the necessary config.
See: https://github.com/rabbitmq/rabbitmq-server/pull/1982
For reliable runs, at least Ansible 2.8 is required (2.8.5 confirmed
to work well). Older Ansible versions are known to miss IPv6 addresses
in interface facts. This may affect redeploys, reconfigures and
upgrades which run after VIP address is assigned.
See: https://github.com/ansible/ansible/issues/63227
Bifrost Train does not support IPv6 deployments.
See: https://storyboard.openstack.org/#!/story/2006689
Change-Id: Ia34e6916ea4f99e9522cd2ddde03a0a4776f7e2c
Implements: blueprint ipv6-control-plane
Signed-off-by: Radosław Piliszek <radoslaw.piliszek@gmail.com>
Sometimes as cloud admins, we want to only update code that is running
in a cloud. But we dont need to do anything else. Make an action in
kolla-ansible that allows us to do that.
Change-Id: I904f595c69f7276e71692696471e32fd1f88e6e8
Implements: blueprint deploy-containers-action
This allows the install type for the project to be different than
kolla_install_type
This can be used to avoid hitting bug 1786238, since kuryr only supports
the source type.
Change-Id: I2b6fc85bac092b1614bccfd22bee48442c55dda4
Closes-Bug: #1786238
Currently, we have a lot of logic for checking if a handler should run,
depending on whether config files have changed and whether the
container configuration has changed. As rm_work pointed out during
the recent haproxy refactor, these conditionals are typically
unnecessary - we can rely on Ansible's handler notification system
to only trigger handlers when they need to run. This removes a lot
of error prone code.
This patch removes conditional handler logic for all services. It is
important to ensure that we no longer trigger handlers when unnecessary,
because without these checks in place it will trigger a restart of the
containers.
Implements: blueprint simplify-handlers
Change-Id: I4f1aa03e9a9faaf8aecd556dfeafdb834042e4cd
We don't add extra volumes support for all services in patch [1].
In order to unify the management of the volume, so we need add extra volumes
support for these services.
[1] 12ff28a693
Change-Id: Ie148accdd8e6c60df6b521d55bda12b850c0d255
Partially-Implements: blueprint support-extra-volumes
Signed-off-by: ZijianGuo <guozijn@gmail.com>
Many tasks that use Docker have become specified already, but
not all. This change ensures all tasks that use the following
modules have become:
* kolla_docker
* kolla_ceph_keyring
* kolla_toolbox
* kolla_container_facts
It also adds become for 'command' tasks that use docker CLI.
Change-Id: I4a5ebcedaccb9261dbc958ec67e8077d7980e496
With this change, an operator may be able to stop a
service container without stopping all services in a host.
This change is the starting point to start
fast-forward upgrades support.
In next changes new flags will be introducced to disable
stop dataplane services during upgrades.
Change-Id: Ifde7a39d7d8596ef0d7405ecf1ac1d49a459d9ef
Implements: blueprint support-stop-containers
That's because instead of start_container we need to
use recreate_or_restart_container in handler.
Change-Id: I3bb0a4c38b9024b2e2e26bfc06cb143bb5d35317
Signed-off-by: Pavel Glushchak <pglushchak@virtuozzo.com>
Having all services in one giant haproxy file makes altering
configuration for a service both painful and dangerous. Each service
should be configured with a simple set of variables and rendered with a
single unified template.
Available are two new templates:
* haproxy_single_service_listen.cfg.j2: close to the original style, but
only one service per file
* haproxy_single_service_split.cfg.j2: using the newer haproxy syntax
for separated frontend and backend
For now the default will be the single listen block, for ease of
transition.
Change-Id: I6e237438fbc0aa3c89a3c8bd706a53b74e71904b
This commit is to apply resource-constraints to a few more OpenStack services.
Commit to apply constraints to the last set of services will be made in
the upcoming commit.
Depends-on: Icafa54baca24d2de64238222a5677b9d8b90e2aa
Change-Id: I39004f54281f97d53dfa4b1dbcf248650ad6f186
Add become to all tasks that use the module "kolla_docker"
Change-Id: I4309c4011687b88ec31d739fd8f834fe2326ff10
Partial-Implements: blueprint ansible-specific-task-become
- rename action and serial to kolla_ansible and kolla_serial
- use become instead of "sudo <command>" in shell
- Remove quota for failed_when and changed_when in rabbitmq tasks
Change-Id: I78cb60168aaa40bb6439198283546b7faf33917c
Implements: blueprint migrate-to-ansible-2-2-0
This patchset implements yamllint test to all *.yml
files.
Also fixes syntax errors to make jobs to pass.
Change-Id: I3186adf9835b4d0cada272d156b17d1bc9c2b799
The default max memory is 64MB, which is too small for production
environment.
Change-Id: I72d87cd29762fe49ae4f711f092df655cea954a9
Closes-Bug: #1758286
Add config_owner_user and config_owner_group to group_vars/all,
which is user and group of Kolla configuration files in /etc/kolla.
Add become to post-deploy playbook.
Add become to only neccesary tasks in roles:
- certificate
- common
- destroy
- haproxy
- mariadb
- memcached
- rabbitmq
Change-Id: I2aba745a6e3928c52642f64551470fd08cbfd058
Partial-Implements: blueprint ansible-specific-task-become
Some roles have a symlink to deploy.yml file
for reconfigure. This is causing some issues.
"included task files must contain a list of tasks"
Change-Id: Ie7ade52900a61bc1c5b867fa7a8f75fc541a6426
Closes-Bug: #1694251
