Use upstream Ansible modules for registration of services, endpoints,
users, projects, roles, and role grants.
Change-Id: I7c9138d422cc91c177fd8992347176bb54156b5a
The pool manager has long been deperecated and
kolla-ansible does not currently have an option
to enable it. So we can safely remove the settings
around it.
Change-Id: I8e97d72421caebba979df0135fb65879e6ae3903
After all of the discussions we had on
"https://review.opendev.org/#/c/670626/2", I studied all projects that
have an "oslo_messaging" section. Afterwards, I applied the same method
that is already used in "oslo_messaging" section in Nova, Cinder, and
others. This guarantees that we have a consistent method to
enable/disable notifications across projects based on components (e.g.
Ceilometer) being enabled or disabled. Here follows the list of
components, and the respective changes I did.
* Aodh:
The section is declared, but it is not used. Therefore, it will
be removed in an upcomming PR.
* Congress:
The section is declared, but it is not used. Therefore, it will
be removed in an upcomming PR.
* Cinder:
It was already properly configured.
* Octavia:
The section is declared, but it is not used. Therefore, it will
be removed in an upcomming PR.
* Heat:
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Ceilometer:
Ceilometer publishes some messages in the rabbitMQ. However, the
default driver is "messagingv2", and not ''(empty) as defined in Oslo;
these configurations are defined in ceilometer/publisher/messaging.py.
Therefore, we do not need to do anything for the
"oslo_messaging_notifications" section in Ceilometer
* Tacker:
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Neutron:
It was already properly configured.
* Nova
It was already properly configured. However, we found another issue
with its configuration. Kolla-ansible does not configure nova
notifications as it should. If 'searchlight' is not installed (enabled)
the 'notification_format' should be 'unversioned'. The default is
'both'; so nova will send a notification to the queue
versioned_notifications; but that queue has no consumer when
'searchlight' is disabled. In our case, the queue got 511k messages.
The huge amount of "stuck" messages made the Rabbitmq cluster
unstable.
https://bugzilla.redhat.com/show_bug.cgi?id=1478274https://bugs.launchpad.net/ceilometer/+bug/1665449
* Nova_hyperv:
I added the same configurations as in Nova project.
* Vitrage
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Searchlight
I created a mechanism similar to what we have in AODH, Cinder, Nova,
and others.
* Ironic
I created a mechanism similar to what we have in AODH, Cinder, Nova,
and others.
* Glance
It was already properly configured.
* Trove
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Blazar
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Sahara
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Watcher
I created a mechanism similar to what we have in AODH, Cinder, Nova,
and others.
* Barbican
I created a mechanism similar to what we have in Cinder, Nova,
and others. I also added a configuration to 'keystone_notifications'
section. Barbican needs its own queue to capture events from Keystone.
Otherwise, it has an impact on Ceilometer and other systems that are
connected to the "notifications" default queue.
* Keystone
Keystone is the system that triggered this work with the discussions
that followed on https://review.opendev.org/#/c/670626/2. After a long
discussion, we agreed to apply the same approach that we have in Nova,
Cinder and other systems in Keystone. That is what we did. Moreover, we
introduce a new topic "barbican_notifications" when barbican is
enabled. We also removed the "variable" enable_cadf_notifications, as
it is obsolete, and the default in Keystone is CADF.
* Mistral:
It was hardcoded "noop" as the driver. However, that does not seem a
good practice. Instead, I applied the same standard of using the driver
and pushing to "notifications" queue if Ceilometer is enabled.
* Cyborg:
I created a mechanism similar to what we have in AODH, Cinder, Nova,
and others.
* Murano
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Senlin
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Manila
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Zun
The section is declared, but it is not used. Therefore, it will
be removed in an upcomming PR.
* Designate
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Magnum
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
Closes-Bug: #1838985
Change-Id: I88bdb004814f37c81c9a9c4e5e491fac69f6f202
Signed-off-by: Rafael Weingärtner <rafael@apache.org>
When integrating 3rd party component into openstack with kolla-ansible,
maybe have to mount some extra volumes to container.
Change-Id: I69108209320edad4c4ffa37dabadff62d7340939
Implements: blueprint support-extra-volumes
This allows designate service endpoints to use custom hostnames, and adds
the
following variables:
* designate_internal_fqdn
* designate_external_fqdn
These default to the old values of kolla_internal_fqdn or
kolla_external_fqdn.
This also adds a designate_api_listen_port option, which defaults to
designate_api_port for backward compatibility.
This option allow the user to differentiate between the port the
service listens on, and the port the service is reachable on. This is
useful for external load balancers which live on the same host as the
service itself.
Change-Id: I654bb3d1109b96cbaff6f450655cd65f349a94e6
Implements: blueprint service-hostnames
Having all services in one giant haproxy file makes altering
configuration for a service both painful and dangerous. Each service
should be configured with a simple set of variables and rendered with a
single unified template.
Available are two new templates:
* haproxy_single_service_listen.cfg.j2: close to the original style, but
only one service per file
* haproxy_single_service_split.cfg.j2: using the newer haproxy syntax
for separated frontend and backend
For now the default will be the single listen block, for ease of
transition.
Change-Id: I6e237438fbc0aa3c89a3c8bd706a53b74e71904b
Now kolla dev mode only support clone master branch from git,
add version tag to support clone dedicated branch.
Change-Id: I88de238e5dc7461ba0662a3ecea9a2d80fd0db60
This commit is to apply resource-constraints only to few OpenStack services.
Commit to apply constraints to other services will be made in coming commits.
Partially-Implements: blueprint resource-constraints
Change-Id: Icafa54baca24d2de64238222a5677b9d8b90e2aa
To get forwarding to work in the kolla implementaion of designate,
I'm adding parameters to the named.conf.j2 template. I'm adding
the ability to change the default values for dnssec-validation and
recursion and creating a new paramater for forwarders.
Change-Id: Ideef39034d75a0d99e8a3dc2a5f1a7203ccf51d5
Closes-Bug: #1781196
Provide support for kolla dev mode in designate. When
'kolla_dev_mode' or 'designate_dev_mode' variables are
enabled, source code of designate project is cloned
and bindmounted.
Partially implements: blueprint mount-sources
Co-Authored-By: zhulingjie <easyzlj@gmail.com>
Change-Id: Ib23fbd3d5ebc7e3ac372e0db1e0048d333eb95c0
This change allows the following use cases:
1. Using an already-configured MariaDB / MySQL server / Cluster
2. Using already-created DB users, without requiring root DB access.
Update: added external mariadb precheck
Change-Id: I78b0d178306d7c5293b0bf53e445f19f18b4b824
Implements: blueprint external-mariadb-support.
Closes-Bug: #1603121
through the database_address has beed defined in groups_vars/all.yml, we should
better use it, this way, if we want to use external database, we just need to
redefined in all.yml
refer to https://github.com/openstack/kolla-ansible/blob/master/ansible/group_vars/all.yml#L83
Co-Authored-By: chenqiaomin <chen.qiaomin@99cloud.net>
Change-Id: Ie559301451954e16347ceaabf02f594c5c5cbe56
In case Kolla's users want to deploy with both of
binary and source image, we should have a variable
install type that define install type for each project.
We also add specific image tag for each Openstack project.
This commit is implemented for Designate, Gnocchi and Heat projects.
Change-Id: I07451750e70e0e6305dca451422e33cd31ce8a4c
Implements: blueprint mixing-binary-and-source-image
Implement ansible role to deploy designate
and dependencies. The backend used is bind9.
Co-Authored-By: zhubingbing <zhubingbing10@gmail.com>
Co-Authored-By: Eduardo Gonzalez <dabarren@gmail.com>
Depends-On: 6d0dc3e0f931c7c50b64a4659900cc50b0d860a2
Implements: blueprint ansible-designate
Change-Id: I34d8126e0cd8d71d5ced9b62f3776cc354fbb549
