Use upstream Ansible modules for registration of services, endpoints,
users, projects, roles, and role grants.
Change-Id: I7c9138d422cc91c177fd8992347176bb54156b5a
After all of the discussions we had on
"https://review.opendev.org/#/c/670626/2", I studied all projects that
have an "oslo_messaging" section. Afterwards, I applied the same method
that is already used in "oslo_messaging" section in Nova, Cinder, and
others. This guarantees that we have a consistent method to
enable/disable notifications across projects based on components (e.g.
Ceilometer) being enabled or disabled. Here follows the list of
components, and the respective changes I did.
* Aodh:
The section is declared, but it is not used. Therefore, it will
be removed in an upcomming PR.
* Congress:
The section is declared, but it is not used. Therefore, it will
be removed in an upcomming PR.
* Cinder:
It was already properly configured.
* Octavia:
The section is declared, but it is not used. Therefore, it will
be removed in an upcomming PR.
* Heat:
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Ceilometer:
Ceilometer publishes some messages in the rabbitMQ. However, the
default driver is "messagingv2", and not ''(empty) as defined in Oslo;
these configurations are defined in ceilometer/publisher/messaging.py.
Therefore, we do not need to do anything for the
"oslo_messaging_notifications" section in Ceilometer
* Tacker:
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Neutron:
It was already properly configured.
* Nova
It was already properly configured. However, we found another issue
with its configuration. Kolla-ansible does not configure nova
notifications as it should. If 'searchlight' is not installed (enabled)
the 'notification_format' should be 'unversioned'. The default is
'both'; so nova will send a notification to the queue
versioned_notifications; but that queue has no consumer when
'searchlight' is disabled. In our case, the queue got 511k messages.
The huge amount of "stuck" messages made the Rabbitmq cluster
unstable.
https://bugzilla.redhat.com/show_bug.cgi?id=1478274https://bugs.launchpad.net/ceilometer/+bug/1665449
* Nova_hyperv:
I added the same configurations as in Nova project.
* Vitrage
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Searchlight
I created a mechanism similar to what we have in AODH, Cinder, Nova,
and others.
* Ironic
I created a mechanism similar to what we have in AODH, Cinder, Nova,
and others.
* Glance
It was already properly configured.
* Trove
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Blazar
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Sahara
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Watcher
I created a mechanism similar to what we have in AODH, Cinder, Nova,
and others.
* Barbican
I created a mechanism similar to what we have in Cinder, Nova,
and others. I also added a configuration to 'keystone_notifications'
section. Barbican needs its own queue to capture events from Keystone.
Otherwise, it has an impact on Ceilometer and other systems that are
connected to the "notifications" default queue.
* Keystone
Keystone is the system that triggered this work with the discussions
that followed on https://review.opendev.org/#/c/670626/2. After a long
discussion, we agreed to apply the same approach that we have in Nova,
Cinder and other systems in Keystone. That is what we did. Moreover, we
introduce a new topic "barbican_notifications" when barbican is
enabled. We also removed the "variable" enable_cadf_notifications, as
it is obsolete, and the default in Keystone is CADF.
* Mistral:
It was hardcoded "noop" as the driver. However, that does not seem a
good practice. Instead, I applied the same standard of using the driver
and pushing to "notifications" queue if Ceilometer is enabled.
* Cyborg:
I created a mechanism similar to what we have in AODH, Cinder, Nova,
and others.
* Murano
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Senlin
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Manila
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Zun
The section is declared, but it is not used. Therefore, it will
be removed in an upcomming PR.
* Designate
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
* Magnum
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components
Closes-Bug: #1838985
Change-Id: I88bdb004814f37c81c9a9c4e5e491fac69f6f202
Signed-off-by: Rafael Weingärtner <rafael@apache.org>
When integrating 3rd party component into openstack with kolla-ansible,
maybe have to mount some extra volumes to container.
Change-Id: I69108209320edad4c4ffa37dabadff62d7340939
Implements: blueprint support-extra-volumes
Vitrage Collector service has been removed from Vitrage in change:
Ie713456b2df96e24d0b15d2362a666162bfb4300.
Change-Id: I45023940c1d2573bfed49d4ce3fac16ed2d559e4
Signed-off-by: Bartosz Zurkowski <b.zurkowski@samsung.com>
Co-Authored-By: Kien Nguyen <kiennt65@viettel.com.vn>
Vitrage has already supported Prometheus as
datasource. Kolla can config it automatically,
just need a little changes, for example in
wsgi config file [1].
Co-Authored-By: Hieu LE <hieulq2@viettel.com.vn>
[1] https://review.openstack.org/#/c/584649/8/devstack/apache-vitrage.template
Change-Id: I64028a0dfd9887813b980a31c30c2c1b1046da61
Having all services in one giant haproxy file makes altering
configuration for a service both painful and dangerous. Each service
should be configured with a simple set of variables and rendered with a
single unified template.
Available are two new templates:
* haproxy_single_service_listen.cfg.j2: close to the original style, but
only one service per file
* haproxy_single_service_split.cfg.j2: using the newer haproxy syntax
for separated frontend and backend
For now the default will be the single listen block, for ease of
transition.
Change-Id: I6e237438fbc0aa3c89a3c8bd706a53b74e71904b
Now kolla dev mode only support clone master branch from git,
add version tag to support clone dedicated branch.
Change-Id: I88de238e5dc7461ba0662a3ecea9a2d80fd0db60
This commit is the final commit to apply resource-constraints
to all OpenStack services.
Depends-on: I39004f54281f97d53dfa4b1dbcf248650ad6f186
Change-Id: I072d69be9698be54775cb0ae286ea2b6ed78776c
Implements: blueprint resource-constraints
Provide support for kolla dev mode in vitrage. When
'kolla_dev_mode' or 'vitrage_dev_mode' variables are
enabled, source code of vitrage project is cloned
and bind mounted.
Partially implements: blueprint mount-sources
Co-Authored-By: zhulingjie <easyzlj@gmail.com>
Change-Id: I095f2b33857abbdd0167ae52899407f2d86229d0
This patchset implements yamllint test to all *.yml
files.
Also fixes syntax errors to make jobs to pass.
Change-Id: I3186adf9835b4d0cada272d156b17d1bc9c2b799
This change allows the following use cases:
1. Using an already-configured MariaDB / MySQL server / Cluster
2. Using already-created DB users, without requiring root DB access.
Update: added external mariadb precheck
Change-Id: I78b0d178306d7c5293b0bf53e445f19f18b4b824
Implements: blueprint external-mariadb-support.
Closes-Bug: #1603121
