This change replaces ElasticSearch with OpenSearch, and Kibana
with OpenSearch Dashboards. It migrates the data from ElasticSearch
to OpenSearch upon upgrade.
No TLS support is in this patch (will be a followup).
A replacement for ElasticSearch Curator will be added as a followup.
Depends-On: https://review.opendev.org/c/openstack/kolla/+/830373
Co-authored-by: Doug Szumski <doug@stackhpc.com>
Co-authored-by: Kyle Dean <kyle@stackhpc.com>
Change-Id: Iab10ce7ea5d5f21a40b1f99b28e3290b7e9ce895
Kolla Ansible is switching to OpenSearch and is dropping support for
deploying ElasticSearch. This is because the final OSS release of
ElasticSearch has exceeded its end of life.
Monasca is affected because it uses both Logstash and ElasticSearch.
Whilst it may continue to work with OpenSearch, Logstash remains an
issue.
In the absence of any renewed interest in the project, we remove
support for deploying it. This helps to reduce the complexity
of log processing configuration in Kolla Ansible, freeing up
development time.
Change-Id: I6fc7842bcda18e417a3fd21c11e28979a470f1cf
From OpenStack Zed the Pure Storage Cinder driver supports
NVMe-RoCE as a dataplane protocol. This patch adds support
for this new driver type.
Also amend a couple of documentation formatting typos.
Change-Id: Ic1eed7d19e9b583e22419625c92ac3507ea4614d
First part of patchset:
https://review.opendev.org/c/openstack/kolla-ansible/+/799229/
in which was suggested to split patch into smaller ones.
This implements kolla_container_engine variable
in command calls of docker,so later on it can be
also used for podman without further change.
Signed-off-by: Ivan Halomi <i.halomi@partner.samsung.com>
Change-Id: Ic30b67daa2e215524096ad1f4385c569e3d41b95
We agreed that CentOS Stream 9 images are not published as we keep it
for CI use only (to check potential failures before it hits RHEL).
We recommend Rocky Linux 9 instead.
Change-Id: I06e6746e5c2abbdcd97912ea2f99d82fc662531d
Some time ago we dropped RHEL as one of possible options. During 'Zed'
cycle we added Rocky Linux 9 as alternative to CentOS Stream 9.
This change updates some mentions of both.
Change-Id: I9ed93efcb7d1ff97b1c7d8342db8252aba2a9887
Kolla Ansible now supports failing execution early if fact collection
fails on any of the hosts. This is to avoid late failures due to missing
facts (especially cross-host).
Change-Id: I7a74b937ded0b9da0621cf413f3a5d0d13a2cd68
Partial-Bug: #1833737
This patch follows upstream and disables linuxbridge testing.
Users are notified of the situation via the release note.
Change-Id: I524682ceb5287c14ef0ba99baae0c081850f4c5e
Kolla environment currently uses haproxy
to fullfill HA in mariadb. This patch
is switching haproxy to proxysql if enabled.
This patch is also replacing mariadb's user
'haproxy' with user 'monitor'. This replacement
has two reasons:
- Use better name to "monitor" galera claster
as there are two services using this user
(HAProxy, ProxySQL)
- Set password for monitor user as it's
always better to use password then not use.
Previous haproxy user didn't use password
as it was historically not possible with
haproxy and mariadb-clustercheck wasn't
implemented.
Depends-On: https://review.opendev.org/c/openstack/kolla/+/769385
Depends-On: https://review.opendev.org/c/openstack/kolla/+/765781
Depends-On: https://review.opendev.org/c/openstack/kolla/+/850656
Change-Id: I0edae33d982c2e3f3b5f34b3d5ad07a431162844
This change introduces automated configuration of firewalld and adds
a new filter for extracting services from the project_services dict.
the filter selects any enabled services and their haproxy element
and returns them so they can be iterated over.
This commit also enables automated configuration of firewalld from enabled
openstack services and adds them to the defined zone and reloads the
system firewall.
Change-Id: Iea3680142711873984efff2b701347b6a56dd355
This reverts commit 73fc230fe3f1d159b5bb9d62a6e15f93cecb6e7c.
Reason for revert: CI jobs failing with "msg": "{{ s3_url }}: 's3_url' is undefined"
Change-Id: Iba7099988cea0c0d8254b9e202309cd9c82a984d
Added options to configure S3 cinder backup driver, so cinder backup
can use S3 storage, for safekeeping backups.
Change-Id: Id6ff6206714581555baacecebfb6d8dd53bed8ac
In the last PTG it was decided to drop the keystone_token_provider variable, because there is no other option anymore.
Signed-off-by: Ramona Rautenberg <rautenberg@osism.tech>
Change-Id: I1ee2c3f9b7dbbbf4633c5874cdbb3c4f8c09e277
Add an enable_cinder_backend_pure_iscsi and
enable_cinder_backend_pure_fc options to etc/kolla/globals.yml
to enable use of the FlashArray backend.
Update the documentation to include a section on configuring
Cinder with the FlashArray.
Implements: blueprint pure-cinder-driver
Change-Id: I464733f1322237321ed1ffff8636cf30bd1cbb38
Add a new parameter 'ironic_dnsmasq_dhcp_ranges' and enable the
configuration of the corresponding 'dhcp-range' and 'dhcp-option'
blocks in Ironic Inspector dnsmasq for multiple ranges.
The old parameters 'ironic_dnsmasq_dhcp_range' and
'ironic_dnsmasq_default_gateway' used for the only range are now
removed.
This change implements the same solution used in the TripleO several
years ago in the: Ie49b07ffe948576f5d9330cf11ee014aef4b282d
Also, this change contains: Iae15e9db0acc2ecd5b087a9ca430be948bc3e649
fix for lease time.
The value can be changed globally or per range.
Change-Id: Ib69fc0017b3bfbc8da4dfd4301710fbf88be661a
Signed-off-by: Maksim Malchuk <maksim.malchuk@gmail.com>
Co-Authored-By: Radosław Piliszek <radoslaw.piliszek@gmail.com>
In most real world deployments, there will be multiple backend DNS
servers, allow to specify all of them for the pool configuration.
Change-Id: Ic9737d0446a807891b429f080ae1bf048a3c8e4a
This project [1] can provide a one-stop solution to log collection,
cleaning, indexing, analysis, alarm, visualization, report generation
and other needs, which involves helping operator or maintainer to
quickly solve retrieve problems, grasp the operational health of the
platform, and improve the level of platform management.
[1] https://wiki.openstack.org/wiki/Venus
Change-Id: If3562bbed6181002b76831bab54f863041c5a885
Add "enable_prometheus_etcd_integration" configuration parameter which
can be used to configure Prometheus to scrape etcd metrics endpoints.
The default value of "enable_prometheus_etcd_integration" is set to
the combined values of "enable_prometheus" and "enable_etcd".
Change-Id: I7a0b802c5687e2d508e06baf55e355d9761e806f
Ironic has changed the default PXE to be iPXE (as opposed to plain
PXE) in Yoga. Kolla Ansible supports either one or the other and
we tend to stick to upstream defaults so this change enables
iPXE instead of plain PXE - by default - the users are allowed
to change back and they need to take one other action so it is
good to remind them via upgrade notes either way.
Change-Id: If14ec83670d2212906c6e22c7013c475f3c4748a
