Make sure that all the sevices will attempt to
connect to the database an infinite about of times.
If the database ever disappears for some reason we
want the services to try and reconnect more than just
10 times.
Closes-bug: #1505636
Change-Id: I77abbf72ce5bfd68faa451bb9a72bd2544963f4b
The Kolla design is for services to use the internalURL for
service to service communication. In Mitaka, Neutron added
a new config parameter specifying which URL to use to to
contact Nova, making the default 'public'. This patch sets
the value to 'internal'.
Change-Id: I2d36f3b4a860af9e9034ebfb2b5cea56450e5e4e
Closes-Bug: #1565624
Without this option set to blank neutron will attempt to dump raw
frames which is not correct. Kevin Benton is working on fixing the
deprecation message.
Change-Id: Ib6d6f41e2f222d383583e79958a78f2a09d3ae93
Closes-Bug: #1561156
These options have all be deprecated/removed. This switches all
options to thier proper mitaka values.
TrivialFix
Change-Id: Ica8d5ea0d48da01ee11672a32890431acd6a306d
The in-process cache for keystone tokens has been deprecated due to
"incosistent results and high memory usage" with the expectation we
switch to memcached_servers if we want to stay performant.
Add memcache_servers [cache] section to the appropriate servers as the
[DEFAULT]\memcache_servers options was deprecated.
TrivialFix
Related-Id: Ied2b88c8cefe5655a88d0c2f334de04e588fa75a
Change-Id: Ic971bdddc0be3338b15924f7cc0f97d4a3ad2440
When using separate networks for external APIs and internal
APIs, services need to be configured to use the internal APIs.
The default is typically publicURL.
TrivialFix
Change-Id: I24da63220a65e210c37d9f24b6d76a0031d66f3d
Due to poor planning on our variable names we have a situation where
we have "internal_address" which must be a VIP, but "external_address"
which should be a DNS name. Now with two vips "external_vip_address"
is a new variable.
This corrects that issue by deprecating kolla_internal_address and
replacing it with 4 nicely named variables.
kolla_internal_vip_address
kolla_internal_fqdn
kolla_external_vip_address
kolla_external_fqdn
The default behaviour will remain the same, and the way the variable
inheritance is setup the kolla_internal_address variable can still be
set in globals.yml and propogate out to these 4 new variables like it
normally would, but all reference to kolla_internal_address has been
completely removed.
Change-Id: I4556dcdbf4d91a8d2751981ef9c64bad44a719e5
Partially-Implements: blueprint ssl-kolla
Changed hard-code keystone username for neutron and heat in the
neutron.conf template and heat.conf template.
TrivialFix
Change-Id: Ibdd1422bd4cae5011f9fc5f4de7dfc58601dca1d
The new heka changed log path. It is necessary to change
the dnsmasq log path as well.
Change-Id: Iaffecb8baf87961931727ce653f6c72740896a8f
Closes-Bug: 1548199
To allow for TLS to protect the service endpoints, the protocol
in the URLs for the endpoints will be either http or https.
This patch removes the hardcoded values of http and replaces them
with variables that can be adjusted accordingly in future patches.
Change-Id: Ibca6f8aac09c65115d1ac9957410e7f81ac7671e
Partially-implements: blueprint ssl-kolla
*** Requires Docker 1.10 which is released ***
Documentation will be in the next patch. You must set the following
in your docker.service daemon control file for propogation to work:
[Service]
MountFlags=shared
======================================================================
Thanks to mount propagation in Docker 1.10 we can use thin containers
finally! This is extremely useful to operators since now they can
access the network namespaces from the hosts (outside the neutron
container). But additionally it allows us to implement the VPN agent
and other services easier.
Neutron containers and the neutron role are brought into the standards
of the new Kolla. Completely with drop-root and ansible formating
updates.
The ip_wrapper.py script was (thankfully) not needed so it has been
removed from the repo.
Partially-Implements: blueprint upgrade-neutron
Change-Id: Iaf5555283240457e1912459f397a6393d886fba1
Option "verbose" from group "DEFAULT" is deprecated for removal.
Its value may be silently ignored in the future.
If this option is not set explicitly, there is no such warning.
Furthermore, the default value of verbose is true, so there is
no need to set this value in config files.
TrivialFix
Change-Id: I3ec2a8900c984a64bc0645672ef89a63975f7f4e
- See instructions in doc/nova-fake-driver.rst
Implements: blueprint nova-fake-driver
Change-Id: I553a40c2df39bdcc391eb1b8b2b8fd5f4ed48c33
Signed-off-by: Hui Kang <kangh@us.ibm.com>
Signed-off-by: Marcio D. Silva <marcios@us.ibm.com>
In heterogeneous environment, api_interfaces are different each other.
So we should specify it from hostvars.
Implements: bp configure-network-interface
Change-Id: Id15d70bfb9ebb62a64a3847a6b77407efb171dbe
Use virtualenv for installation of OpenStack projects and
dependencies to avoid conflicts with Python libraries installed
by non-OpenStack binary packages.
Change-Id: I21ecd673b2e93335b1d3dd4e279e940c9d694c3c
Implements: blueprint virtualenv
vxlan should be allowed in tenant_network_types because it used in
tunnel_types.
Allow all flat networks when ironic enabled.
TrivialFix
Change-Id: I39b2fbf26bb4c9047e7c3ea5ca7749ae113e4ed8
Adjust all the configs to list all the rabbitmq hosts rather than
running rabbitmq through the VIP. This is made possible by clusterer
which has already merged.
Change-Id: I5db48f5f10ec68f4c8863a29bc13984f6845a4f9
Partially-Implements: blueprint rabbitmq-clusterer
This brings Kolla images inline with FHS and should make finding
locations of things more consistent and reliable with the linux world
at large.
Change-Id: Iece5b4da4bace0fb8b1f41a65ab2c852ec73e6f8
Closes-Bug: #1485742
Neutron Agents is a special case for json support. Since it's a fat
container, there will be multiple commnds that will need to be run
in the container. In order to account for this, the commands will be
hardcoded until the agents are split out to their own containers.
The files will be copied the normal way.
Co-Authored-By: Steven Dake <stdake@cisco.com>
Change-Id: I9fc226cc7b82c2594db5814d30d453a29a4af8c0
Partially-Implements: blueprint replace-config-external
Closes-Bug: #1500566
Configuration based off upstream documentation here:
http://docs.openstack.org/developer/ironic/deploy/install-guide.html
A few notes:
-ironic-api is not configured to use mod_wsgi
-several places it's noted that discoverd is going away and needs to be
replaced with ironic-inspector - (sqlite connection should be changed
too)
-currently enabling ironic reconfigures nova compute (driver and
scheduler) as well as changes neutron network settings
-a nice enhancement would be to configure the web console
Required post-deployment configuration:
Create the flat network to launch the instances:
neutron net-create --tenant-id $TENANT_ID sharednet1 --shared \
--provider:network_type flat --provider:physical_network physnet1
neutron subnet-create sharednet1 $NETWORK_CIDR --name $SUBNET_NAME \
--ip-version=4 --gateway=$GATEWAY_IP --allocation-pool \
start=$START_IP,end=$END_IP --enable-dhcp
And then the above ID is used to set cleaning_network_uuid in the neutron
section of ironic.conf.
Change-Id: I572e7ff1f23c4e57a2c50817cafe9269fd9950dd
Implements: blueprint ironic-container
This is only for the Neutron thin containers. The Neutron agents
are still in a fat container. I'll replace in another patch.
Change-Id: I8533af52bfa3f268aa8ffb1c16ae49f5a300da27
Partially-Implements: blueprint replace-config-external
Cleanup all options in the minimal neutron confs. Remove options where
the default value was specified explicitly. Updated ports and bindings
to be configurable.
Partially-Implements: blueprint update-configs
Change-Id: I420ea1469e7bbe87aca0754cd3507098501f1de5
Cleanup all options in the minimal nova.conf. Remove options where
the default value was specified explicitly. Updated ports and bindings
to be configurable.
Partially-Implements: blueprint update-configs
Change-Id: I0bca7a8f9c4c6fa40145d66a95de7e98edc0edce
Allows the user to configure neutron_plugin_agent value for Ansible.
Current allowed values are openvswitch and linuxbridge.
Implements: blueprint ansible-neutron-linuxbridge
Change-Id: I0572464a5459d2f9da09b6da22db16e240511f99
This makes some changes to init-runonce to allow using Ansible as well as
updating it to use the openstack-client where applicable since the
keystone-client is not usable with keystone v3 api at all.
Change-Id: I6b9d6beb04df7724b1967638e98042ab03221cd1
Closes-Bug: #1477725
neutron-server was not properly using ml2_conf.ini
nova did not have ovs utils, and it had incorrect libvirt permissions
Change-Id: I43d2110d0b5fc1940d887dace95787e1ebbe142d
Partitially-Implements: blueprint ansible-service
Ansible will exec a script in the OVS container to ensure the bridge and
ports are properly setup. The script is idempotent.
Change-Id: I5adca595a4d2ef4edf26c9635cfa5ceb30ca4a59
Closes-Bug: #1466375
