==================================== Libvirt - Nova Virtualisation Driver ==================================== Overview ======== Libvirt is the most commonly used virtualisation driver in OpenStack. It uses libvirt, backed by QEMU and when available, KVM. Libvirt is executed in the ``nova_libvirt`` container, or as a daemon running on the host. Hardware Virtualisation ======================= Two values are supported for ``nova_compute_virt_type`` with libvirt - ``kvm`` and ``qemu``, with ``kvm`` being the default. For optimal performance, ``kvm`` is preferable, since many aspects of virtualisation can be offloaded to hardware. If it is not possible to enable hardware virtualisation (e.g. Virtualisation Technology (VT) BIOS configuration on Intel systems), ``qemu`` may be used to provide less performant software-emulated virtualisation. SASL Authentication =================== The default configuration of Kolla Ansible is to run libvirt over TCP, authenticated with SASL. This should not be considered as providing a secure, encrypted channel, since the username/password SASL mechanisms available for TCP are no longer considered cryptographically secure. However, it does at least provide some authentication for the libvirt API. For a more secure encrypted channel, use :ref`libvirt TLS `. SASL is enabled according to the ``libvirt_enable_sasl`` flag, which defaults to ``true``. The username is configured via ``libvirt_sasl_authname``, and defaults to ``kolla``. The password is configured via ``libvirt_sasl_password``, and is generated with other passwords using and stored in ``passwords.yml``. The list of enabled authentication mechanisms is configured via ``libvirt_sasl_mech_list``, and defaults to ``["SCRAM-SHA-256"]`` if libvirt TLS is enabled, or ``["DIGEST-MD5"]`` otherwise. Host vs containerised libvirt ============================= By default, Kolla Ansible deploys libvirt in a ``nova_libvirt`` container. In some cases it may be preferable to run libvirt as a daemon on the compute hosts instead. Kolla Ansible does not currently support deploying and configuring libvirt as a host daemon. However, since the Yoga release, if a libvirt daemon has already been set up, then Kolla Ansible may be configured to use it. This may be achieved by setting ``enable_nova_libvirt_container`` to ``false``. Migration of hosts from a containerised libvirt to host libvirt is currently not supported. .. libvirt-tls: Libvirt TLS =========== The default configuration of Kolla Ansible is to run libvirt over TCP, with SASL authentication. As long as one takes steps to protect who can access the network this works well. However, in a less trusted environment one may want to use encryption when accessing the libvirt API. To do this we can enable TLS for libvirt and make nova use it. Mutual TLS is configured, providing authentication of clients via certificates. SASL authentication provides a further level of security. Using libvirt TLS ~~~~~~~~~~~~~~~~~ Libvirt TLS can be enabled in Kolla Ansible by setting the following option in ``/etc/kolla/globals.yml``: .. code-block:: yaml libvirt_tls: "yes" Creation of the TLS certificates is currently out-of-scope for Kolla Ansible. You will need to either use an existing Internal CA or you will need to generate your own offline CA. For the TLS communication to work correctly you will have to supply Kolla Ansible the following pieces of information: * cacert.pem - This is the CA's public certificate that all of the client and server certificates are signed with. Libvirt and nova-compute will need this so they can verify that all the certificates being used were signed by the CA and should be trusted. * serverkey.pem (not used when using a host libvirt daemon) - This is the private key for the server, and is no different than the private key of a TLS certificate. It should be carefully protected, just like the private key of a TLS certificate. * servercert.pem (not used when using a host libvirt daemon) - This is the public certificate for the server. Libvirt will present this certificate to any connection made to the TLS port. This is no different than the public certificate part of a standard TLS certificate/key bundle. * clientkey.pem - This is the client private key, which nova-compute/libvirt will use when it is connecting to libvirt. Think of this as an SSH private key and protect it in a similar manner. * clientcert.pem - This is the client certificate that nova-compute/libvirt will present when it is connecting to libvirt. Think of this as the public side of an SSH key. Kolla Ansible will search for these files for each compute node in the following locations and order on the host where Kolla Ansible is executed: - ``/etc/kolla/config/nova/nova-libvirt//`` - ``/etc/kolla/config/nova/nova-libvirt/`` In most cases you will want to have a unique set of server and client certificates and keys per hypervisor and with a common CA certificate. In this case you would place each of the server/client certificate and key PEM files under ``/etc/kolla/config/nova/nova-libvirt//`` and the CA certificate under ``/etc/kolla/config/nova/nova-libvirt/``. However, it is possible to make use of wildcard server certificate and a single client certificate that is shared by all servers. This will allow you to generate a single client certificate and a single server certificate that is shared across every hypervisor. In this case you would store everything under ``/etc/kolla/config/nova/nova-libvirt/``. Externally managed certificates ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ One more option for deployers who already have automation to get TLS certs onto servers is to disable certificate management under ``/etc/kolla/globals.yaml``: .. code-block:: yaml libvirt_tls_manage_certs: "no" With this option disabled Kolla Ansible will simply assume that certificates and keys are already installed in their correct locations. Deployers will be responsible for making sure that the TLS certificates/keys get placed in to the correct container configuration directories on the servers so that they can get copied into the nova-compute and nova-libvirt containers. With this option disabled you will also be responsible for restarting the nova-compute and nova-libvirt containers when the certs are updated, as kolla-ansible will not be able to tell when the files have changed.