.. Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. Convention for heading levels in Neutron devref: ======= Heading 0 (reserved for the title in a document) ------- Heading 1 ~~~~~~~ Heading 2 +++++++ Heading 3 ''''''' Heading 4 (Avoid deeper levels because they do not render well.) Authorization Policy Enforcement ================================== As most OpenStack projects, Neutron leverages oslo_policy [#]_. However, since Neutron loves to be special and complicate every developer's life, it also "augments" oslo_policy capabilities by: * A wrapper module with its own API: neutron.policy; * The ability of adding fine-grained checks on attributes for resources in request bodies; * The ability of using the policy engine to filter out attributes in responses; * Adding some custom rule checks beyond those defined in oslo_policy; This document discusses Neutron-specific aspects of policy enforcement, and in particular how the enforcement logic is wired into API processing. For any other information please refer to the developer documentation for oslo_policy [#]_. Authorization workflow ----------------------- The Neutron API controllers perform policy checks in two phases during the processing of an API request: * Request authorization, immediately before dispatching the request to the plugin layer for ``POST``, ``PUT``, and ``DELETE``, and immediately after returning from the plugin layer for ``GET`` requests; * Response filtering, when building the response to be returned to the API consumer. Request authorization ~~~~~~~~~~~~~~~~~~~~~~ The aim of this step is to authorize processing for a request or reject it with an error status code. This step uses the ``neutron.policy.enforce`` routine. This routine raises ``oslo_policy.PolicyNotAuthorized`` when policy enforcement fails. The Neutron REST API controllers catch this exception and return: * A 403 response code on a ``POST`` request or an ``PUT`` request for an object owned by the project submitting the request; * A 403 response for failures while authorizing API actions such as ``add_router_interface``; * A 404 response for ``DELETE``, ``GET`` and all other ``PUT`` requests. For ``DELETE`` operations the resource must first be fetched. This is done invoking the same ``_item`` [#]_ method used for processing ``GET`` requests. This is also true for ``PUT`` operations, since the Neutron API implements ``PATCH`` semantics for ``PUTs``. The criteria to evaluate are built in the ``_build_match_rule`` [#]_ routine. This routine takes in input the following parameters: * The action to be performed, in the ``_`` form, ``e.g.: create_network`` * The data to use for performing checks. For ``POST`` operations this could be a partial specification of the object, whereas it is always a full specification for ``GET``, ``PUT``, and ``DELETE`` requests, as resource data are retrieved before dispatching the call to the plugin layer. * The collection name for the resource specified in the previous parameter; for instance, for a network it would be the "networks". The ``_build_match_rule`` routine returns a ``oslo_policy.RuleCheck`` instance built in the following way: * Always add a check for the action being performed. This will match a policy like create_network in ``policy.json``; * Return for ``GET`` operations; more detailed checks will be performed anyway when building the response; * For each attribute which has been explicitly specified in the request create a rule matching policy names in the form ``_:`` rule, and link it with the previous rule with an 'And' relationship (using ``oslo_policy.AndCheck``); this step will be performed only if the enforce_policy flag is set to True in the resource attribute descriptor (usually found in a data structure called ``RESOURCE_ATTRIBUTE_MAP``); * If the attribute is a composite one then further rules will be created; These will match policy names in the form ``_: :``. An 'And' relationship will be used in this case too. As all the rules to verify are linked by 'And' relationships, all the policy checks should succeed in order for a request to be authorized. Rule verification is performed by ``oslo_policy`` with no "customization" from the Neutron side. Response Filtering ~~~~~~~~~~~~~~~~~~~ Some Neutron extensions, like the provider networks one, add some attribute to resources which are however not meant to be consumed by all clients. This might be because these attributes contain implementation details, or are meant only to be used when exchanging information between services, such as Nova and Neutron; For this reason the policy engine is invoked again when building API responses. This is achieved by the ``_exclude_attributes_by_policy`` [#]_ method in ``neutron.api.v2.base.Controller``; This method, for each attribute in the response returned by the plugin layer, first checks if the ``is_visible`` flag is True. In that case it proceeds to checking policies for the attribute; if the policy check fails the attribute is added to a list of attributes that should be removed from the response before returning it to the API client. The neutron.policy API ------------------------ The ``neutron.policy`` module exposes a simple API whose main goal if to allow the REST API controllers to implement the authorization workflow discussed in this document. It is a bad practice to call the policy engine from within the plugin layer, as this would make request authorization dependent on configured plugins, and therefore make API behaviour dependent on the plugin itself, which defies Neutron tenet of being backend agnostic. The neutron.policy API exposes the following routines: * ``init`` Initializes the policy engine loading rules from the json policy (files). This method can safely be called several times. * ``reset`` Clears all the rules currently configured in the policy engine. It is called in unit tests and at the end of the initialization of core API router [#]_ in order to ensure rules are loaded after all the extensions are loaded. * ``refresh`` Combines init and reset. Called when a SIGHUP signal is sent to an API worker. * ``set_rules`` Explicitly set policy engine's rules. Used only in unit tests. * ``check`` Perform a check using the policy engine. Builds match rules as described in this document, and then evaluates the resulting rule using oslo_policy's policy engine. Returns True if the checks succeeds, false otherwise. * ``enforce`` Operates like the check routine but raises if the check in oslo_policy fails. * ``check_is_admin`` Enforce the predefined context_is_admin rule; used to determine the is_admin property for a neutron context. * ``check_is_advsvc`` Enforce the predefined context_is_advsvc rule; used to determine the is_advsvc property for a neutron context. Neutron specific policy rules ------------------------------ Neutron provides two additional policy rule classes in order to support the "augmented" authorization capabilities it provides. They both extend ``oslo_policy.RuleCheck`` and are registered using the ``oslo_policy.register`` decorator. OwnerCheck: Extended Checks for Resource Ownership ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ This class is registered for rules matching the ``tenant_id`` keyword and overrides the generic check performed by oslo_policy in this case. It uses for those cases where neutron needs to check whether the project submitting a request for a new resource owns the parent resource of the one being created. Current usages of ``OwnerCheck`` include, for instance, creating and updating a subnet. The check, performed in the ``__call__`` method, works as follows: * verify if the target field is already in the target data. If yes, then simply verify whether the value for the target field in target data is equal to value for the same field in credentials, just like ``oslo_policy.GeneriCheck`` would do. This is also the most frequent case as the target field is usually ``tenant_id``; * if the previous check failed, extract a parent resource type and a parent field name from the target field. For instance ``networks:tenant_id`` identifies the ``tenant_id`` attribute of the ``network`` resource; * if no parent resource or target field could be identified raise a ``PolicyCheckError`` exception; * Retrieve a 'parent foreign key' from the ``_RESOURCE_FOREIGN_KEYS`` data structure in ``neutron.policy``. This foreign key is simply the attribute acting as a primary key in the parent resource. A ``PolicyCheckError`` exception will be raised if such 'parent foreign key' cannot be retrieved; * Using the core plugin, retrieve an instance of the resource having 'parent foreign key' as an identifier; * Finally, verify whether the target field in this resource matches the one in the initial request data. For instance, for a port create request, verify whether the ``tenant_id`` of the port data structure matches the ``tenant_id`` of the network where this port is being created. FieldCheck: Verify Resource Attributes ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ This class is registered with the policy engine for rules matching the 'field' keyword, and provides a way to perform fine grained checks on resource attributes. For instance, using this class of rules it is possible to specify a rule for granting every project read access to shared resources. In policy.json, a FieldCheck rules is specified in the following way:: > field: := This will result in the initialization of a FieldCheck that will check for ```` in the target resource data, and return ``True`` if it is equal to ```` or return ``False`` is the ```` either is not equal to ```` or does not exist at all. Guidance for API developers ---------------------------- When developing REST APIs for Neutron it is important to be aware of how the policy engine will authorize these requests. This is true both for APIs served by Neutron "core" and for the APIs served by the various Neutron "stadium" services. * If an attribute of a resource might be subject to authorization checks then the ``enforce_policy`` attribute should be set to ``True``. While setting this flag to ``True`` for each attribute is a viable strategy, it is worth noting that this will require a call to the policy engine for each attribute, thus consistently increasing the time required to complete policy checks for a resource. This could result in a scalability issue, especially in the case of list operations retrieving a large number of resources; * Some resource attributes, even if not directly used in policy checks might still be required by the policy engine. This is for instance the case of the ``tenant_id`` attribute. For these attributes the ``required_by_policy`` attribute should always set to ``True``. This will ensure that the attribute is included in the resource data sent to the policy engine for evaluation; * The ``tenant_id`` attribute is a fundamental one in Neutron API request authorization. The default policy, ``admin_or_owner``, uses it to validate if a project owns the resource it is trying to operate on. To this aim, if a resource without a tenant_id is created, it is important to ensure that ad-hoc authZ policies are specified for this resource. * There is still only one check which is hardcoded in Neutron's API layer: the check to verify that a project owns the network on which it is creating a port. This check is hardcoded and is always executed when creating a port, unless the network is shared. Unfortunately a solution for performing this check in an efficient way through the policy engine has not yet been found. Due to its nature, there is no way to override this check using the policy engine. * It is strongly advised to not perform policy checks in the plugin or in the database management classes. This might lead to divergent API behaviours across plugins. Also, it might leave the Neutron DB in an inconsistent state if a request is not authorized after it has already been dispatched to the backend. Notes ----------------------- * No authorization checks are performed for requests coming from the RPC over AMQP channel. For all these requests a neutron admin context is built, and the plugins will process them as such. * For ``PUT`` and ``DELETE`` requests a 404 error is returned on request authorization failures rather than a 403, unless the project submitting the request own the resource to update or delete. This is to avoid conditions in which an API client might try and find out other projects' resource identifiers by sending out ``PUT`` and ``DELETE`` requests for random resource identifiers. * There is no way at the moment to specify an ``OR`` relationship between two attributes of a given resource (eg.: ``port.name == 'meh' or port.status == 'DOWN'``), unless the rule with the or condition is explicitly added to the policy.json file. * ``OwnerCheck`` performs a plugin access; this will likely require a database access, but since the behaviour is implementation specific it might also imply a round-trip to the backend. This class of checks, when involving retrieving attributes for 'parent' resources should be used very sparingly. * In order for ``OwnerCheck`` rules to work, parent resources should have an entry in ``neutron.policy._RESOURCE_FOREIGN_KEYS``; moreover the resource must be managed by the 'core' plugin (ie: the one defined in the core_plugin configuration variable) References ---------- .. [#] `Oslo policy module `_ .. [#] `Oslo policy developer `_ .. [#] API controller item_ method .. _item: http://git.openstack.org/cgit/openstack/neutron/tree/neutron/api/v2/base.py?id=2015.1.1#n282 .. [#] Policy engine's build_match_rule_ method .. _build_match_rule: http://git.openstack.org/cgit/openstack/neutron/tree/neutron/policy.py?id=2015.1.1#n187 .. [#] exclude_attributes_by_policy_ method .. _exclude_attributes_by_policy: http://git.openstack.org/cgit/openstack/neutron/tree/neutron/api/v2/base.py?id=2015.1.1#n132 .. [#] Policy reset_ in neutron.api.v2.router .. _reset: http://git.openstack.org/cgit/openstack/neutron/tree/neutron/api/v2/router.py?id=2015.1.1#n122