openstack/openstack-manuals
Code Issues Proposed changes

Added Training Labs Automation Scripts

Browse Source 
Removed Unwanted White Spaces.Z
Removed Cirros Image from one of the sub folder.

These scripts are meant to automate deployment of
OpenStack for training and Lab sessions.

bp/training-manuals

Change-Id: I0f46d986d154a1993b014847c2181c7b59412c87
This commit is contained in:
Pranav Salunke 2013-10-04 12:51:09 +05:30 committed by Pranav Salunke
parent 49031c20db
commit 37f62041cb
41 changed files with 3636 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

50
doc/training-guide/training-labs/How to Contribute.md Normal file
View File

@ -0,0 +1,50 @@
How to contribute
=================
I would be glad to get some hands on the testing part of this repository. Please do follow these steps to get down to testing.
Setting Up Test Environment
---------
For using Virtual Box as test environment, you need to attach three network adapters
1. Host-Only/ Bridged -- 10.10.10.51 (Guest) -- 10.10.10.xx (Host IP for Host-Only)
2. Host-Only/ Bridged -- 192.168.100.51 (Guest) -- 192.168.100.xx (Host IP for Host-Only)
3. Bridged/NAT -- DHCP --
**Note:** These Scripts should be run without internet connection after Pre-Install.sh. If your networking configuration is not exact a few command will not work. you need to change the Templates/* to the required IP Addresses for custom networks.
Testing
-------
**Note:** As of now only */Scripts/ folders content are being tested. Please run the file ~/Scripts/test_scripts.sh for testing all the scripts at once with one click.
1. Test Scripts Individually.
Run the Scripts inside the Scripts Folder to check whether the shell scripts are properly functioning.
You Dont Need to install Vitual Box although it is adviced to do so, as there is a good chance that you may end up breaking your host machine.
* How to Test them??
Testing these scripts is as simple as running them. Although some of the scripts need the required Input parameters.
If you do not want to run them manually then you may run the Scripts/test_scripts.sh file.
**Note:** No Need for Virutalbox Guest Addons for testing the scripts as units.
2. Test Entire System
You need to install Virtual Box, install Ubuntu Server 12.04 or 13.04. After installation you also need to install Virtual Box Guest Addons.
To install Virtual Box guest addons you need do the following :
Either use the Virtual Box Guest Addons Installation via. ISO,
```
#apt-get install linux-headers-generic
#mount /dev/cdrom0/ /tmp/cdrom
#cd /tmp/cdrom/
#./virtualbox
```
Or You May use Ubuntu Repositories for the same
```
#apt-get install linux-headers-generic
#apt-get --no-install-recommends install virtualbox-guest-additions
```

1
doc/training-guide/training-labs/README.md Executable file
View File

@ -0,0 +1 @@
blueprint and wikis will be up in some time.

48
doc/training-guide/training-labs/Scripts/Cinder/Cinder.sh Normal file
View File

@ -0,0 +1,48 @@
#!/bin/sh
#
# About:Setup Dependences for Virtual Box Sandbox
# meant for OpenStack Labs.
#
# Contact: pranav@aptira.com
# Copyright : Aptira @aptira,aptira.com
# License: Apache Software License (ASL) 2.0
###############################################################################
# #
# This Script will install Cinder related packages and after installaion, it #
# will configure Cinder, populate the database. #
# #
###############################################################################
# Note: You DoNot Need Internet for this due to the magic of --download-only
echo "Internet connection is not required for this script to run"
Install_Cinder() {
# 1. Install Cinder
apt-get install -y cinder-api cinder-scheduler cinder-volume iscsitarget open-iscsi iscsitarget-dkms
# 2. Configure iscsi services
sed -i 's/false/true/g' /etc/default/iscsitarget
# 3. Restart the services
service iscsitarget start
service open-iscsi start
# 4. Configure the templates
cp --no-preserve=mode,ownership Templates/api-paste.ini /etc/cinder/api-paste.ini
cp --no-preserve=mode,ownership Templates/cinder.conf /etc/cinder/cinder.conf
# 5. MySQL database
cinder-manage db sync
# 5. Format the disks -- see if something else is available instead of
# fdisk
bash format_volumes # Need Expert Advice on this ....
pvcreate /dev/sdb
vgcreate cinder-volumes /dev/sdb
# 6. Restart Cinder Related Services
for i in $( ls /etc/init.d/cinder-* ); do $i restart; done
}
Install_Cinder

62
doc/training-guide/training-labs/Scripts/Cinder/Templates/api-paste.ini Normal file
View File

@ -0,0 +1,62 @@
#############
# OpenStack #
#############
[composite:osapi_volume]
use = call:cinder.api:root_app_factory
/: apiversions
/v1: openstack_volume_api_v1
/v2: openstack_volume_api_v2
[composite:openstack_volume_api_v1]
use = call:cinder.api.middleware.auth:pipeline_factory
noauth = faultwrap sizelimit noauth apiv1
keystone = faultwrap sizelimit authtoken keystonecontext apiv1
keystone_nolimit = faultwrap sizelimit authtoken keystonecontext apiv1
[composite:openstack_volume_api_v2]
use = call:cinder.api.middleware.auth:pipeline_factory
noauth = faultwrap sizelimit noauth apiv2
keystone = faultwrap sizelimit authtoken keystonecontext apiv2
keystone_nolimit = faultwrap sizelimit authtoken keystonecontext apiv2
[filter:faultwrap]
paste.filter_factory = cinder.api.middleware.fault:FaultWrapper.factory
[filter:noauth]
paste.filter_factory = cinder.api.middleware.auth:NoAuthMiddleware.factory
[filter:sizelimit]
paste.filter_factory = cinder.api.middleware.sizelimit:RequestBodySizeLimiter.factory
[app:apiv1]
paste.app_factory = cinder.api.v1.router:APIRouter.factory
[app:apiv2]
paste.app_factory = cinder.api.v2.router:APIRouter.factory
[pipeline:apiversions]
pipeline = faultwrap osvolumeversionapp
[app:osvolumeversionapp]
paste.app_factory = cinder.api.versions:Versions.factory
##########
# Shared #
##########
[filter:keystonecontext]
paste.filter_factory = cinder.api.middleware.auth:CinderKeystoneContext.factory
[filter:authtoken]
paste.filter_factory = keystoneclient.middleware.auth_token:filter_factory
service_protocol = http
service_host = 192.168.100.51
service_port = 5000
auth_host = 10.10.10.51
auth_port = 35357
auth_protocol = http
admin_tenant_name = service
admin_user = cinder
admin_password = service_pass
signing_dir = /var/lib/cinder

13
doc/training-guide/training-labs/Scripts/Cinder/Templates/cinder.conf Normal file
View File

@ -0,0 +1,13 @@
[DEFAULT]
rootwrap_config=/etc/cinder/rootwrap.conf
sql_connection = mysql://cinderUser:cinderPass@10.10.10.51/cinder
api_paste_config = /etc/cinder/api-paste.ini
iscsi_helper=ietadm
volume_name_template = volume-%s
volume_group = cinder-volumes
verbose = True
auth_strategy = keystone
#osapi_volume_listen_port=5900
state_path = /var/lib/cinder
lock_path = /var/lock/cinder
volumes_dir = /var/lib/cinder/volumes

29
doc/training-guide/training-labs/Scripts/Cinder/format_volumes.sh Normal file
View File

@ -0,0 +1,29 @@
#!/bin/sh
#
# About:Setup Dependences for Virtual Box Sandbox
# meant for OpenStack Labs.
#
# Contact: pranav@aptira.com
# Copyright : Aptira @aptira,aptira.com
# License: Apache Software License (ASL) 2.0
###############################################################################
# #
# This Script will configure cinder volumes #
# #
###############################################################################
# Note: You DoNot Need Internet for this due to the magic of --download-only
echo "Enter Location of Disk To be used for formatting"
read $disk
# Assuming /dev/sdb for now
cat <<EOF | fdisk /dev/sdb
n
p
1
t
8e
w
EOF
partprobe

47
doc/training-guide/training-labs/Scripts/Glance/Glance.sh Normal file
View File

@ -0,0 +1,47 @@
#!/bin/sh
#
# About:Setup Dependences for Virtual Box Sandbox
# meant for OpenStack Labs.
#
# Contact: pranav@aptira.com
# Copyright : Aptira @aptira,aptira.com
# License: Apache Software License (ASL) 2.0
###############################################################################
# #
# This Script will install Glance related packages and after installaion, it #
# will configure Glance #
# #
###############################################################################
# Note: You DoNot Need Internet for this due to the magic of --download-only
echo "Internet connection is not required for this script to run"
glance_conf(){
#1. Install Glance
apt-get install -y glance
#2. Configure the Config Files
cp --no-preserve=mode,ownership Templates/glance-api.conf /etc/glance/glance-api.conf
cp --no-preserve=mode,ownership Templates/glance-api-paste.ini /etc/glance/glance-api-paste.ini
cp --no-preserve=mode,ownership Templates/glance-registry-paste.ini /etc/glance/glance-registry-paste.ini
cp --no-preserve=mode,ownership Templates/glance-registry.conf /etc/glance/glance-registry.conf
#3. Restart Glance Services
service glance-api restart
service glance-registry restart
#5. Sync Glance Database
glance-manage db_sync
#4. Upload Cirros Image to Glance
source ../Keystone/Scripts/Credentials.sh
wget http://download.cirros-cloud.net/0.3.1/cirros-0.3.1-x86_64-disk.img
glance image-create --name myFirstImage --is-public true --container-format bare --disk-format qcow2 < cirros-0.3.1-x86_64-disk.img
#5. Check The Image
glance image-list
}
echo "Running Glance Configuration"
glance_conf

63
doc/training-guide/training-labs/Scripts/Glance/Templates/glance-api-paste.ini Normal file
View File

@ -0,0 +1,63 @@
# Use this pipeline for no auth or image caching - DEFAULT
[pipeline:glance-api]
pipeline = versionnegotiation unauthenticated-context rootapp
# Use this pipeline for image caching and no auth
[pipeline:glance-api-caching]
pipeline = versionnegotiation unauthenticated-context cache rootapp
# Use this pipeline for caching w/ management interface but no auth
[pipeline:glance-api-cachemanagement]
pipeline = versionnegotiation unauthenticated-context cache cachemanage rootapp
# Use this pipeline for keystone auth
[pipeline:glance-api-keystone]
pipeline = versionnegotiation authtoken context rootapp
# Use this pipeline for keystone auth with image caching
[pipeline:glance-api-keystone+caching]
pipeline = versionnegotiation authtoken context cache rootapp
# Use this pipeline for keystone auth with caching and cache management
[pipeline:glance-api-keystone+cachemanagement]
pipeline = versionnegotiation authtoken context cache cachemanage rootapp
[composite:rootapp]
paste.composite_factory = glance.api:root_app_factory
/: apiversions
/v1: apiv1app
/v2: apiv2app
[app:apiversions]
paste.app_factory = glance.api.versions:create_resource
[app:apiv1app]
paste.app_factory = glance.api.v1.router:API.factory
[app:apiv2app]
paste.app_factory = glance.api.v2.router:API.factory
[filter:versionnegotiation]
paste.filter_factory = glance.api.middleware.version_negotiation:VersionNegotiationFilter.factory
[filter:cache]
paste.filter_factory = glance.api.middleware.cache:CacheFilter.factory
[filter:cachemanage]
paste.filter_factory = glance.api.middleware.cache_manage:CacheManageFilter.factory
[filter:context]
paste.filter_factory = glance.api.middleware.context:ContextMiddleware.factory
[filter:unauthenticated-context]
paste.filter_factory = glance.api.middleware.context:UnauthenticatedContextMiddleware.factory
[filter:authtoken]
paste.filter_factory = keystoneclient.middleware.auth_token:filter_factory
delay_auth_decision = true
auth_host = 10.10.10.51
auth_port = 35357
auth_protocol = http
admin_tenant_name = service
admin_user = glance
admin_password = service_pass

356
doc/training-guide/training-labs/Scripts/Glance/Templates/glance-api.conf Normal file
View File

@ -0,0 +1,356 @@
[DEFAULT]
# Show more verbose log output (sets INFO log level output)
#verbose = False
# Show debugging output in logs (sets DEBUG log level output)
#debug = False
# Which backend scheme should Glance use by default is not specified
# in a request to add a new image to Glance? Known schemes are determined
# by the known_stores option below.
# Default: 'file'
default_store = file
# List of which store classes and store class locations are
# currently known to glance at startup.
#known_stores = glance.store.filesystem.Store,
# glance.store.http.Store,
# glance.store.rbd.Store,
# glance.store.s3.Store,
# glance.store.swift.Store,
# Maximum image size (in bytes) that may be uploaded through the
# Glance API server. Defaults to 1 TB.
# WARNING: this value should only be increased after careful consideration
# and must be set to a value under 8 EB (9223372036854775808).
#image_size_cap = 1099511627776
# Address to bind the API server
bind_host = 0.0.0.0
# Port the bind the API server to
bind_port = 9292
# Log to this file. Make sure you do not set the same log
# file for both the API and registry servers!
log_file = /var/log/glance/api.log
# Backlog requests when creating socket
backlog = 4096
# TCP_KEEPIDLE value in seconds when creating socket.
# Not supported on OS X.
#tcp_keepidle = 600
# SQLAlchemy connection string for the reference implementation
# registry server. Any valid SQLAlchemy connection string is fine.
# See: http://www.sqlalchemy.org/docs/05/reference/sqlalchemy/connections.html#sqlalchemy.create_engine
sql_connection = mysql://glanceUser:glancePass@10.10.10.51/glance
# Period in seconds after which SQLAlchemy should reestablish its connection
# to the database.
#
# MySQL uses a default `wait_timeout` of 8 hours, after which it will drop
# idle connections. This can result in 'MySQL Gone Away' exceptions. If you
# notice this, you can lower this value to ensure that SQLAlchemy reconnects
# before MySQL can drop the connection.
sql_idle_timeout = 3600
# Number of Glance API worker processes to start.
# On machines with more than one CPU increasing this value
# may improve performance (especially if using SSL with
# compression turned on). It is typically recommended to set
# this value to the number of CPUs present on your machine.
workers = 1
# Role used to identify an authenticated user as administrator
#admin_role = admin
# Allow unauthenticated users to access the API with read-only
# privileges. This only applies when using ContextMiddleware.
#allow_anonymous_access = False
# Allow access to version 1 of glance api
#enable_v1_api = True
# Allow access to version 2 of glance api
#enable_v2_api = True
# Return the URL that references where the data is stored on
# the backend storage system. For example, if using the
# file system store a URL of 'file:///path/to/image' will
# be returned to the user in the 'direct_url' meta-data field.
# The default value is false.
#show_image_direct_url = False
# ================= Syslog Options ============================
# Send logs to syslog (/dev/log) instead of to file specified
# by `log_file`
#use_syslog = False
# Facility to use. If unset defaults to LOG_USER.
#syslog_log_facility = LOG_LOCAL0
# ================= SSL Options ===============================
# Certificate file to use when starting API server securely
#cert_file = /path/to/certfile
# Private key file to use when starting API server securely
#key_file = /path/to/keyfile
# CA certificate file to use to verify connecting clients
#ca_file = /path/to/cafile
# ================= Security Options ==========================
# AES key for encrypting store 'location' metadata, including
# -- if used -- Swift or S3 credentials
# Should be set to a random string of length 16, 24 or 32 bytes
#metadata_encryption_key = <16, 24 or 32 char registry metadata key>
# ============ Registry Options ===============================
# Address to find the registry server
registry_host = 0.0.0.0
# Port the registry server is listening on
registry_port = 9191
# What protocol to use when connecting to the registry server?
# Set to https for secure HTTP communication
registry_client_protocol = http
# The path to the key file to use in SSL connections to the
# registry server, if any. Alternately, you may set the
# GLANCE_CLIENT_KEY_FILE environ variable to a filepath of the key file
#registry_client_key_file = /path/to/key/file
# The path to the cert file to use in SSL connections to the
# registry server, if any. Alternately, you may set the
# GLANCE_CLIENT_CERT_FILE environ variable to a filepath of the cert file
#registry_client_cert_file = /path/to/cert/file
# The path to the certifying authority cert file to use in SSL connections
# to the registry server, if any. Alternately, you may set the
# GLANCE_CLIENT_CA_FILE environ variable to a filepath of the CA cert file
#registry_client_ca_file = /path/to/ca/file
# When using SSL in connections to the registry server, do not require
# validation via a certifying authority. This is the registry's equivalent of
# specifying --insecure on the command line using glanceclient for the API
# Default: False
#registry_client_insecure = False
# The period of time, in seconds, that the API server will wait for a registry
# request to complete. A value of '0' implies no timeout.
# Default: 600
#registry_client_timeout = 600
# Whether to automatically create the database tables.
# Default: False
#db_auto_create = False
# ============ Notification System Options =====================
# Notifications can be sent when images are create, updated or deleted.
# There are three methods of sending notifications, logging (via the
# log_file directive), rabbit (via a rabbitmq queue), qpid (via a Qpid
# message queue), or noop (no notifications sent, the default)
notifier_strategy = noop
# Configuration options if sending notifications via rabbitmq (these are
# the defaults)
rabbit_host = localhost
rabbit_port = 5672
rabbit_use_ssl = false
rabbit_userid = guest
rabbit_password = guest
rabbit_virtual_host = /
rabbit_notification_exchange = glance
rabbit_notification_topic = notifications
rabbit_durable_queues = False
# Configuration options if sending notifications via Qpid (these are
# the defaults)
qpid_notification_exchange = glance
qpid_notification_topic = notifications
qpid_host = localhost
qpid_port = 5672
qpid_username =
qpid_password =
qpid_sasl_mechanisms =
qpid_reconnect_timeout = 0
qpid_reconnect_limit = 0
qpid_reconnect_interval_min = 0
qpid_reconnect_interval_max = 0
qpid_reconnect_interval = 0
qpid_heartbeat = 5
# Set to 'ssl' to enable SSL
qpid_protocol = tcp
qpid_tcp_nodelay = True
# ============ Filesystem Store Options ========================
# Directory that the Filesystem backend store
# writes image data to
filesystem_store_datadir = /var/lib/glance/images/
# ============ Swift Store Options =============================
# Version of the authentication service to use
# Valid versions are '2' for keystone and '1' for swauth and rackspace
swift_store_auth_version = 2
# Address where the Swift authentication service lives
# Valid schemes are 'http://' and 'https://'
# If no scheme specified, default to 'https://'
# For swauth, use something like '127.0.0.1:8080/v1.0/'
swift_store_auth_address = 127.0.0.1:5000/v2.0/
# User to authenticate against the Swift authentication service
# If you use Swift authentication service, set it to 'account':'user'
# where 'account' is a Swift storage account and 'user'
# is a user in that account
swift_store_user = jdoe:jdoe
# Auth key for the user authenticating against the
# Swift authentication service
swift_store_key = a86850deb2742ec3cb41518e26aa2d89
# Container within the account that the account should use
# for storing images in Swift
swift_store_container = glance
# Do we create the container if it does not exist?
swift_store_create_container_on_put = False
# What size, in MB, should Glance start chunking image files
# and do a large object manifest in Swift? By default, this is
# the maximum object size in Swift, which is 5GB
swift_store_large_object_size = 5120
# When doing a large object manifest, what size, in MB, should
# Glance write chunks to Swift? This amount of data is written
# to a temporary disk buffer during the process of chunking
# the image file, and the default is 200MB
swift_store_large_object_chunk_size = 200
# Whether to use ServiceNET to communicate with the Swift storage servers.
# (If you aren't RACKSPACE, leave this False!)
#
# To use ServiceNET for authentication, prefix hostname of
# `swift_store_auth_address` with 'snet-'.
# Ex. https://example.com/v1.0/ -> https://snet-example.com/v1.0/
swift_enable_snet = False
# If set to True enables multi-tenant storage mode which causes Glance images
# to be stored in tenant specific Swift accounts.
#swift_store_multi_tenant = False
# A list of swift ACL strings that will be applied as both read and
# write ACLs to the containers created by Glance in multi-tenant
# mode. This grants the specified tenants/users read and write access
# to all newly created image objects. The standard swift ACL string
# formats are allowed, including:
# <tenant_id>:<username>
# <tenant_name>:<username>
# *:<username>
# Multiple ACLs can be combined using a comma separated list, for
# example: swift_store_admin_tenants = service:glance,*:admin
#swift_store_admin_tenants =
# The region of the swift endpoint to be used for single tenant. This setting
# is only necessary if the tenant has multiple swift endpoints.
#swift_store_region =
# ============ S3 Store Options =============================
# Address where the S3 authentication service lives
# Valid schemes are 'http://' and 'https://'
# If no scheme specified, default to 'http://'
s3_store_host = 127.0.0.1:8080/v1.0/
# User to authenticate against the S3 authentication service
s3_store_access_key = <20-char AWS access key>
# Auth key for the user authenticating against the
# S3 authentication service
s3_store_secret_key = <40-char AWS secret key>
# Container within the account that the account should use
# for storing images in S3. Note that S3 has a flat namespace,
# so you need a unique bucket name for your glance images. An
# easy way to do this is append your AWS access key to "glance".
# S3 buckets in AWS *must* be lowercased, so remember to lowercase
# your AWS access key if you use it in your bucket name below!
s3_store_bucket = <lowercased 20-char aws access key>glance
# Do we create the bucket if it does not exist?
s3_store_create_bucket_on_put = False
# When sending images to S3, the data will first be written to a
# temporary buffer on disk. By default the platform's temporary directory
# will be used. If required, an alternative directory can be specified here.
#s3_store_object_buffer_dir = /path/to/dir
# When forming a bucket url, boto will either set the bucket name as the
# subdomain or as the first token of the path. Amazon's S3 service will
# accept it as the subdomain, but Swift's S3 middleware requires it be
# in the path. Set this to 'path' or 'subdomain' - defaults to 'subdomain'.
#s3_store_bucket_url_format = subdomain
# ============ RBD Store Options =============================
# Ceph configuration file path
# If using cephx authentication, this file should
# include a reference to the right keyring
# in a client.<USER> section
rbd_store_ceph_conf = /etc/ceph/ceph.conf
# RADOS user to authenticate as (only applicable if using cephx)
rbd_store_user = glance
# RADOS pool in which images are stored
rbd_store_pool = images
# Images will be chunked into objects of this size (in megabytes).
# For best performance, this should be a power of two
rbd_store_chunk_size = 8
# ============ Delayed Delete Options =============================
# Turn on/off delayed delete
delayed_delete = False
# Delayed delete time in seconds
scrub_time = 43200
# Directory that the scrubber will use to remind itself of what to delete
# Make sure this is also set in glance-scrubber.conf
scrubber_datadir = /var/lib/glance/scrubber
# =============== Image Cache Options =============================
# Base directory that the Image Cache uses
image_cache_dir = /var/lib/glance/image-cache/
[keystone_authtoken]
auth_host = 127.0.0.1
auth_port = 35357
auth_protocol = http
admin_tenant_name = %SERVICE_TENANT_NAME%
admin_user = %SERVICE_USER%
admin_password = %SERVICE_PASSWORD%
[paste_deploy]
# Name of the paste configuration file that defines the available pipelines
#config_file = glance-api-paste.ini
# Partial name of a pipeline in your paste configuration file with the
# service name removed. For example, if your paste section name is
# [pipeline:glance-api-keystone], you would configure the flavor below
# as 'keystone'.
flavor = keystone

25
doc/training-guide/training-labs/Scripts/Glance/Templates/glance-registry-paste.ini Normal file
View File

@ -0,0 +1,25 @@
# Use this pipeline for no auth - DEFAULT
[pipeline:glance-registry]
pipeline = unauthenticated-context registryapp
# Use this pipeline for keystone auth
[pipeline:glance-registry-keystone]
pipeline = authtoken context registryapp
[app:registryapp]
paste.app_factory = glance.registry.api.v1:API.factory
[filter:context]
paste.filter_factory = glance.api.middleware.context:ContextMiddleware.factory
[filter:unauthenticated-context]
paste.filter_factory = glance.api.middleware.context:UnauthenticatedContextMiddleware.factory
[filter:authtoken]
paste.filter_factory = keystoneclient.middleware.auth_token:filter_factory
auth_host = 10.10.10.51
auth_port = 35357
auth_protocol = http
admin_tenant_name = service
admin_user = glance
admin_password = service_pass

90
doc/training-guide/training-labs/Scripts/Glance/Templates/glance-registry.conf Normal file
View File

@ -0,0 +1,90 @@
[DEFAULT]
# Show more verbose log output (sets INFO log level output)
#verbose = False
# Show debugging output in logs (sets DEBUG log level output)
#debug = False
# Address to bind the registry server
bind_host = 0.0.0.0
# Port the bind the registry server to
bind_port = 9191
# Log to this file. Make sure you do not set the same log
# file for both the API and registry servers!
log_file = /var/log/glance/registry.log
# Backlog requests when creating socket
backlog = 4096
# TCP_KEEPIDLE value in seconds when creating socket.
# Not supported on OS X.
#tcp_keepidle = 600
# SQLAlchemy connection string for the reference implementation
# registry server. Any valid SQLAlchemy connection string is fine.
# See: http://www.sqlalchemy.org/docs/05/reference/sqlalchemy/connections.html#sqlalchemy.create_engine
sql_connection = mysql://glanceUser:glancePass@10.10.10.51/glance
# Period in seconds after which SQLAlchemy should reestablish its connection
# to the database.
#
# MySQL uses a default `wait_timeout` of 8 hours, after which it will drop
# idle connections. This can result in 'MySQL Gone Away' exceptions. If you
# notice this, you can lower this value to ensure that SQLAlchemy reconnects
# before MySQL can drop the connection.
sql_idle_timeout = 3600
# Limit the api to return `param_limit_max` items in a call to a container. If
# a larger `limit` query param is provided, it will be reduced to this value.
api_limit_max = 1000
# If a `limit` query param is not provided in an api request, it will
# default to `limit_param_default`
limit_param_default = 25
# Role used to identify an authenticated user as administrator
#admin_role = admin
# Whether to automatically create the database tables.
# Default: False
#db_auto_create = False
# ================= Syslog Options ============================
# Send logs to syslog (/dev/log) instead of to file specified
# by `log_file`
#use_syslog = False
# Facility to use. If unset defaults to LOG_USER.
#syslog_log_facility = LOG_LOCAL1
# ================= SSL Options ===============================
# Certificate file to use when starting registry server securely
#cert_file = /path/to/certfile
# Private key file to use when starting registry server securely
#key_file = /path/to/keyfile
# CA certificate file to use to verify connecting clients
#ca_file = /path/to/cafile
[keystone_authtoken]
auth_host = 127.0.0.1
auth_port = 35357
auth_protocol = http
admin_tenant_name = %SERVICE_TENANT_NAME%
admin_user = %SERVICE_USER%
admin_password = %SERVICE_PASSWORD%
[paste_deploy]
# Name of the paste configuration file that defines the available pipelines
#config_file = glance-registry-paste.ini
# Partial name of a pipeline in your paste configuration file with the
# service name removed. For example, if your paste section name is
# [pipeline:glance-registry-keystone], you would configure the flavor below
# as 'keystone'.
flavor = keystone

29
doc/training-guide/training-labs/Scripts/Horizon/Horizon.sh Normal file
View File

@ -0,0 +1,29 @@
#!/bin/sh
#
# About:Setup Dependences for Virtual Box Sandbox
# meant for OpenStack Labs.
#
# Contact: pranav@aptira.com
# Copyright : Aptira @aptira,aptira.com
# License: Apache Software License (ASL) 2.0
###############################################################################
# #
# This Script will install Horizon related packages. #
# #
###############################################################################
# Note: You DoNot Need Internet for this due to the magic of --download-only
echo "Internet connection is not required for this script to run"
Install_Horizon() {
# 1. Install Horizon
apt-get install -y openstack-dashboard memcached
# 2. Restart Apache2 and Memcached
service apache2 restart
service memcached restart
echo " You are done with OpenStack Installation "
}
Install_Horizon

88
doc/training-guide/training-labs/Scripts/Keystone/Keystone.sh Normal file
View File

@ -0,0 +1,88 @@
#!/bin/sh
#
# About:Setup Dependences for Virtual Box Sandbox
# meant for OpenStack Labs.
#
# Contact: pranav@aptira.com
# Copyright : Aptira @aptira,aptira.com
# License: Apache Software License (ASL) 2.0
###############################################################################
# #
# This Script will install keystone related packages and after installaion, #
# it will configure Keystone, populate the database. #
# #
###############################################################################
# Note: You Do Not Need Internet for this due to the magic of --download-only
echo "Internet connection is not required for this script to run"
pre_keystone(){
# 1. Database - MySQL and Python MySQL DB Connector
debconf-set-selections <<< 'mysql-server mysql-server/root_password password '$MySQL_RPaSS''
debconf-set-selections <<< 'mysql-server mysql-server/root_password_again password '$MySQL_RPaSS''
apt-get install -y mysql-server python-mysqldb
# Configure MySQL to listen to other all IP addresses
sed -i 's/127.0.0.1/0.0.0.0/g' /etc/mysql/my.cnf
# Restart MySQL service
service mysql restart
# 2. Install RabbitMQ
apt-get install -y rabbitmq-server
apt-get install -y ntp
apt-get install -y vlan bridge-utils
# Enable IP Forwarding
sed -i 's/#net.ipv4.ip_forward=1/net.ipv4.ip_forward=1/' /etc/sysctl.conf
sysctl net.ipv4.ip_forward=1
}
keystone_conf() {
# 1. Install Keystone
apt-get -y install keystone
# Create Database Keystone, Glance, Quantum, Nova and Cinder
mysql -u "root" -p"$MySQL_RPaSS" -e "create database keystone"
mysql -u "root" -p"$MySQL_RPaSS" -e "GRANT ALL ON keystone.* TO 'keystoneUser'@'%' IDENTIFIED BY 'keystonePass';"
mysql -u "root" -p"$MySQL_RPaSS" -e "create database glance"
mysql -u "root" -p"$MySQL_RPaSS" -e "GRANT ALL ON glance.* TO 'glanceUser'@'%' IDENTIFIED BY 'glancePass';"
mysql -u "root" -p"$MySQL_RPaSS" -e "create database quantum"
mysql -u "root" -p"$MySQL_RPaSS" -e "GRANT ALL ON quantum.* TO 'quantumUser'@'%' IDENTIFIED BY 'quantumPass';"
mysql -u "root" -p"$MySQL_RPaSS" -e "create database nova"
mysql -u "root" -p"$MySQL_RPaSS" -e "GRANT ALL ON nova.* TO 'novaUser'@'%' IDENTIFIED BY 'novaPass';"
mysql -u "root" -p"$MySQL_RPaSS" -e "create database cinder"
mysql -u "root" -p"$MySQL_RPaSS" -e "GRANT ALL ON cinder.* TO 'cinderUser'@'%' IDENTIFIED BY 'cinderPass';"
# 2. Configure keystone scripts (copy the template file)
cp --no-preserve=mode,ownership Templates/Keystone.conf /etc/keystone/keystone.conf
# 3. Restart The Keystone Services
service keystone restart
# 4. Populate the database using db_sync
keystone-manage db_sync
# Create User and grant access to the user
sh Scripts/keystone_basic.sh
sh Scripts/keystone_endpoints_basic.sh
# Load the Auth Creds
source Scripts/Credentials.sh
# Check The Keystone Useres
keystone user-list
}
# Create required MySQL Databases and Populate It.
echo "Enter MySQL root pass"
read MySQL_RPaSS
echo "Running pre_keystone"
pre_keystone
echo "Running keystone_conf"
keystone_conf

4
doc/training-guide/training-labs/Scripts/Keystone/Scripts/Credentials.sh Normal file
View File

@ -0,0 +1,4 @@
export OS_TENANT_NAME=admin
export OS_USERNAME=admin
export OS_PASSWORD=admin_pass
export OS_AUTH_URL="http://192.168.100.51:5000/v2.0/"

60
doc/training-guide/training-labs/Scripts/Keystone/Scripts/keystone_basic.sh Normal file
View File

@ -0,0 +1,60 @@
#!/bin/bash
#
# About:Setup Dependences for Virtual Box Sandbox
# meant for OpenStack Labs.
#
# Contact: pranav@aptira.com
# License: Apache Software License (ASL) 2.0
# Inspired by https://github.com/mseknibilel/OpenStack-Grizzly-Install-Guide
###############################################################################
# #
# This Script will pupolate database and configure keystone related packages #
# and after installaion, itbase. #
# #
###############################################################################
HOST_IP=10.10.10.51
ADMIN_PASSWORD=${ADMIN_PASSWORD:-admin_pass}
SERVICE_PASSWORD=${SERVICE_PASSWORD:-service_pass}
export SERVICE_TOKEN="ADMIN"
export SERVICE_ENDPOINT="http://${HOST_IP}:35357/v2.0"
SERVICE_TENANT_NAME=${SERVICE_TENANT_NAME:-service}
get_id () {
echo `$@ | awk '/ id / { print $4 }'`
}
# Tenants
ADMIN_TENANT=$(get_id keystone tenant-create --name=admin)
SERVICE_TENANT=$(get_id keystone tenant-create --name=$SERVICE_TENANT_NAME)
# Users
ADMIN_USER=$(get_id keystone user-create --name=admin --pass="$ADMIN_PASSWORD" --email=admin@domain.com)
# Roles
ADMIN_ROLE=$(get_id keystone role-create --name=admin)
KEYSTONEADMIN_ROLE=$(get_id keystone role-create --name=KeystoneAdmin)
KEYSTONESERVICE_ROLE=$(get_id keystone role-create --name=KeystoneServiceAdmin)
# Add Roles to Users in Tenants
keystone user-role-add --user-id $ADMIN_USER --role-id $ADMIN_ROLE --tenant-id $ADMIN_TENANT
keystone user-role-add --user-id $ADMIN_USER --role-id $KEYSTONEADMIN_ROLE --tenant-id $ADMIN_TENANT
keystone user-role-add --user-id $ADMIN_USER --role-id $KEYSTONESERVICE_ROLE --tenant-id $ADMIN_TENANT
# The Member role is used by Horizon and Swift
MEMBER_ROLE=$(get_id keystone role-create --name=Member)
# Configure service users/roles
NOVA_USER=$(get_id keystone user-create --name=nova --pass="$SERVICE_PASSWORD" --tenant-id $SERVICE_TENANT --email=nova@domain.com)
keystone user-role-add --tenant-id $SERVICE_TENANT --user-id $NOVA_USER --role-id $ADMIN_ROLE
GLANCE_USER=$(get_id keystone user-create --name=glance --pass="$SERVICE_PASSWORD" --tenant-id $SERVICE_TENANT --email=glance@domain.com)
keystone user-role-add --tenant-id $SERVICE_TENANT --user-id $GLANCE_USER --role-id $ADMIN_ROLE
QUANTUM_USER=$(get_id keystone user-create --name=quantum --pass="$SERVICE_PASSWORD" --tenant-id $SERVICE_TENANT --email=quantum@domain.com)
keystone user-role-add --tenant-id $SERVICE_TENANT --user-id $QUANTUM_USER --role-id $ADMIN_ROLE
CINDER_USER=$(get_id keystone user-create --name=cinder --pass="$SERVICE_PASSWORD" --tenant-id $SERVICE_TENANT --email=cinder@domain.com)
keystone user-role-add --tenant-id $SERVICE_TENANT --user-id $CINDER_USER --role-id $ADMIN_ROLE

138
doc/training-guide/training-labs/Scripts/Keystone/Scripts/keystone_endpoints_basic.sh Normal file
View File

@ -0,0 +1,138 @@
#!/bin/bash
#
# About:Setup Dependences for Virtual Box Sandbox
# meant for OpenStack Labs.
#
# Contact: pranav@aptira.com
# License: Apache Software License (ASL) 2.0
# Inspired by https://github.com/mseknibilel/OpenStack-Grizzly-Install-Guide
###############################################################################
# #
# This Script will pupolate database and configure keystone related packages #
# and after installaion, itbase. #
# #
###############################################################################
# Host address
HOST_IP=10.10.10.51
EXT_HOST_IP=192.168.100.51
# MySQL definitions
MYSQL_USER=keystoneUser
MYSQL_DATABASE=keystone
MYSQL_HOST=$HOST_IP
MYSQL_PASSWORD=keystonePass
# Keystone definitions
KEYSTONE_REGION=RegionOne
export SERVICE_TOKEN=ADMIN
export SERVICE_ENDPOINT="http://${HOST_IP}:35357/v2.0"
while getopts "u:D:p:m:K:R:E:T:vh" opt; do
case $opt in
u)
MYSQL_USER=$OPTARG
;;
D)
MYSQL_DATABASE=$OPTARG
;;
p)
MYSQL_PASSWORD=$OPTARG
;;
m)
MYSQL_HOST=$OPTARG
;;
K)
MASTER=$OPTARG
;;
R)
KEYSTONE_REGION=$OPTARG
;;
E)
export SERVICE_ENDPOINT=$OPTARG
;;
T)
export SERVICE_TOKEN=$OPTARG
;;
v)
set -x
;;
h)
cat <<EOF
Usage: $0 [-m mysql_hostname] [-u mysql_username] [-D mysql_database] [-p mysql_password]
[-K keystone_master ] [ -R keystone_region ] [ -E keystone_endpoint_url ]
[ -T keystone_token ]
Add -v for verbose mode, -h to display this message.
EOF
exit 0
;;
\?)
echo "Unknown option -$OPTARG" >&2
exit 1
;;
:)
echo "Option -$OPTARG requires an argument" >&2
exit 1
;;
esac
done
if [ -z "$KEYSTONE_REGION" ]; then
echo "Keystone region not set. Please set with -R option or set KEYSTONE_REGION variable." >&2
missing_args="true"
fi
if [ -z "$SERVICE_TOKEN" ]; then
echo "Keystone service token not set. Please set with -T option or set SERVICE_TOKEN variable." >&2
missing_args="true"
fi
if [ -z "$SERVICE_ENDPOINT" ]; then
echo "Keystone service endpoint not set. Please set with -E option or set SERVICE_ENDPOINT variable." >&2
missing_args="true"
fi
if [ -z "$MYSQL_PASSWORD" ]; then
echo "MySQL password not set. Please set with -p option or set MYSQL_PASSWORD variable." >&2
missing_args="true"
fi
if [ -n "$missing_args" ]; then
exit 1
fi
keystone service-create --name nova --type compute --description 'OpenStack Compute Service'
keystone service-create --name cinder --type volume --description 'OpenStack Volume Service'
keystone service-create --name glance --type image --description 'OpenStack Image Service'
keystone service-create --name keystone --type identity --description 'OpenStack Identity'
keystone service-create --name ec2 --type ec2 --description 'OpenStack EC2 service'
keystone service-create --name quantum --type network --description 'OpenStack Networking service'
create_endpoint () {
case $1 in
compute)
keystone endpoint-create --region $KEYSTONE_REGION --service-id $2 --publicurl 'http://'"$EXT_HOST_IP"':8774/v2/$(tenant_id)s' --adminurl 'http://'"$HOST_IP"':8774/v2/$(tenant_id)s' --internalurl 'http://'"$HOST_IP"':8774/v2/$(tenant_id)s'
;;
volume)
keystone endpoint-create --region $KEYSTONE_REGION --service-id $2 --publicurl 'http://'"$EXT_HOST_IP"':8776/v1/$(tenant_id)s' --adminurl 'http://'"$HOST_IP"':8776/v1/$(tenant_id)s' --internalurl 'http://'"$HOST_IP"':8776/v1/$(tenant_id)s'
;;
image)
keystone endpoint-create --region $KEYSTONE_REGION --service-id $2 --publicurl 'http://'"$EXT_HOST_IP"':9292/' --adminurl 'http://'"$HOST_IP"':9292/' --internalurl 'http://'"$HOST_IP"':9292/'
;;
identity)
keystone endpoint-create --region $KEYSTONE_REGION --service-id $2 --publicurl 'http://'"$EXT_HOST_IP"':5000/v2.0' --adminurl 'http://'"$HOST_IP"':35357/v2.0' --internalurl 'http://'"$HOST_IP"':5000/v2.0'
;;
ec2)
keystone endpoint-create --region $KEYSTONE_REGION --service-id $2 --publicurl 'http://'"$EXT_HOST_IP"':8773/services/Cloud' --adminurl 'http://'"$HOST_IP"':8773/services/Admin' --internalurl 'http://'"$HOST_IP"':8773/services/Cloud'
;;
network)
keystone endpoint-create --region $KEYSTONE_REGION --service-id $2 --publicurl 'http://'"$EXT_HOST_IP"':9696/' --adminurl 'http://'"$HOST_IP"':9696/' --internalurl 'http://'"$HOST_IP"':9696/'
;;
esac
}
for i in compute volume image object-store identity ec2 network; do
id=`mysql -h "$MYSQL_HOST" -u "$MYSQL_USER" -p"$MYSQL_PASSWORD" "$MYSQL_DATABASE" -ss -e "SELECT id FROM service WHERE type='"$i"';"` || exit 1
create_endpoint $i $id
done

302
doc/training-guide/training-labs/Scripts/Keystone/Templates/Keystone.conf Normal file
View File

@ -0,0 +1,302 @@
[DEFAULT]
# A "shared secret" between keystone and other openstack services
# admin_token = ADMIN
# The IP address of the network interface to listen on
# bind_host = 0.0.0.0
# The port number which the public service listens on
# public_port = 5000
# The port number which the public admin listens on
# admin_port = 35357
# The base endpoint URLs for keystone that are advertised to clients
# (NOTE: this does NOT affect how keystone listens for connections)
# public_endpoint = http://localhost:%(public_port)d/
# admin_endpoint = http://localhost:%(admin_port)d/
# The port number which the OpenStack Compute service listens on
# compute_port = 8774
# Path to your policy definition containing identity actions
# policy_file = policy.json
# Rule to check if no matching policy definition is found
# FIXME(dolph): This should really be defined as [policy] default_rule
# policy_default_rule = admin_required
# Role for migrating membership relationships
# During a SQL upgrade, the following values will be used to create a new role
# that will replace records in the user_tenant_membership table with explicit
# role grants. After migration, the member_role_id will be used in the API
# add_user_to_project, and member_role_name will be ignored.
# member_role_id = 9fe2ff9ee4384b1894a90878d3e92bab
# member_role_name = _member_
# === Logging Options ===
# Print debugging output
# (includes plaintext request logging, potentially including passwords)
# debug = False
# Print more verbose output
# verbose = False
# Name of log file to output to. If not set, logging will go to stdout.
log_file = keystone.log
# The directory to keep log files in (will be prepended to --logfile)
log_dir = /var/log/keystone
# Use syslog for logging.
# use_syslog = False
# syslog facility to receive log lines
# syslog_log_facility = LOG_USER
# If this option is specified, the logging configuration file specified is
# used and overrides any other logging options specified. Please see the
# Python logging module documentation for details on logging configuration
# files.
# log_config = logging.conf
# A logging.Formatter log message format string which may use any of the
# available logging.LogRecord attributes.
# log_format = %(asctime)s %(levelname)8s [%(name)s] %(message)s
# Format string for %(asctime)s in log records.
# log_date_format = %Y-%m-%d %H:%M:%S
# onready allows you to send a notification when the process is ready to serve
# For example, to have it notify using systemd, one could set shell command:
# onready = systemd-notify --ready
# or a module with notify() method:
# onready = keystone.common.systemd
[sql]
# The SQLAlchemy connection string used to connect to the database
connection = mysql://keystoneUser:keystonePass@10.10.10.51/keystone
# the timeout before idle sql connections are reaped
# idle_timeout = 200
[identity]
driver = keystone.identity.backends.sql.Identity
# This references the domain to use for all Identity API v2 requests (which are
# not aware of domains). A domain with this ID will be created for you by
# keystone-manage db_sync in migration 008. The domain referenced by this ID
# cannot be deleted on the v3 API, to prevent accidentally breaking the v2 API.
# There is nothing special about this domain, other than the fact that it must
# exist to order to maintain support for your v2 clients.
# default_domain_id = default
[trust]
driver = keystone.trust.backends.sql.Trust
# delegation and impersonation features can be optionally disabled
# enabled = True
[catalog]
# dynamic, sql-based backend (supports API/CLI-based management commands)
driver = keystone.catalog.backends.sql.Catalog
# static, file-based backend (does *NOT* support any management commands)
# driver = keystone.catalog.backends.templated.TemplatedCatalog
# template_file = default_catalog.templates
[token]
driver = keystone.token.backends.sql.Token
# Amount of time a token should remain valid (in seconds)
# expiration = 86400
[policy]
driver = keystone.policy.backends.sql.Policy
[ec2]
driver = keystone.contrib.ec2.backends.sql.Ec2
[ssl]
#enable = True
#certfile = /etc/keystone/ssl/certs/keystone.pem
#keyfile = /etc/keystone/ssl/private/keystonekey.pem
#ca_certs = /etc/keystone/ssl/certs/ca.pem
#cert_required = True
[signing]
#token_format = PKI
#certfile = /etc/keystone/ssl/certs/signing_cert.pem
#keyfile = /etc/keystone/ssl/private/signing_key.pem
#ca_certs = /etc/keystone/ssl/certs/ca.pem
#key_size = 1024
#valid_days = 3650
#ca_password = None
[ldap]
# url = ldap://localhost
# user = dc=Manager,dc=example,dc=com
# password = None
# suffix = cn=example,cn=com
# use_dumb_member = False
# allow_subtree_delete = False
# dumb_member = cn=dumb,dc=example,dc=com
# Maximum results per page; a value of zero ('0') disables paging (default)
# page_size = 0
# The LDAP dereferencing option for queries. This can be either 'never',
# 'searching', 'always', 'finding' or 'default'. The 'default' option falls
# back to using default dereferencing configured by your ldap.conf.
# alias_dereferencing = default
# The LDAP scope for queries, this can be either 'one'
# (onelevel/singleLevel) or 'sub' (subtree/wholeSubtree)
# query_scope = one
# user_tree_dn = ou=Users,dc=example,dc=com
# user_filter =
# user_objectclass = inetOrgPerson
# user_domain_id_attribute = businessCategory
# user_id_attribute = cn
# user_name_attribute = sn
# user_mail_attribute = email
# user_pass_attribute = userPassword
# user_enabled_attribute = enabled
# user_enabled_mask = 0
# user_enabled_default = True
# user_attribute_ignore = tenant_id,tenants
# user_allow_create = True
# user_allow_update = True
# user_allow_delete = True
# user_enabled_emulation = False
# user_enabled_emulation_dn =
# tenant_tree_dn = ou=Groups,dc=example,dc=com
# tenant_filter =
# tenant_objectclass = groupOfNames
# tenant_domain_id_attribute = businessCategory
# tenant_id_attribute = cn
# tenant_member_attribute = member
# tenant_name_attribute = ou
# tenant_desc_attribute = desc
# tenant_enabled_attribute = enabled
# tenant_attribute_ignore =
# tenant_allow_create = True
# tenant_allow_update = True
# tenant_allow_delete = True
# tenant_enabled_emulation = False
# tenant_enabled_emulation_dn =
# role_tree_dn = ou=Roles,dc=example,dc=com
# role_filter =
# role_objectclass = organizationalRole
# role_id_attribute = cn
# role_name_attribute = ou
# role_member_attribute = roleOccupant
# role_attribute_ignore =
# role_allow_create = True
# role_allow_update = True
# role_allow_delete = True
# group_tree_dn =
# group_filter =
# group_objectclass = groupOfNames
# group_id_attribute = cn
# group_name_attribute = ou
# group_member_attribute = member
# group_desc_attribute = desc
# group_attribute_ignore =
# group_allow_create = True
# group_allow_update = True
# group_allow_delete = True
[auth]
methods = password,token
password = keystone.auth.plugins.password.Password
token = keystone.auth.plugins.token.Token
[filter:debug]
paste.filter_factory = keystone.common.wsgi:Debug.factory
[filter:token_auth]
paste.filter_factory = keystone.middleware:TokenAuthMiddleware.factory
[filter:admin_token_auth]
paste.filter_factory = keystone.middleware:AdminTokenAuthMiddleware.factory
[filter:xml_body]
paste.filter_factory = keystone.middleware:XmlBodyMiddleware.factory
[filter:json_body]
paste.filter_factory = keystone.middleware:JsonBodyMiddleware.factory
[filter:user_crud_extension]
paste.filter_factory = keystone.contrib.user_crud:CrudExtension.factory
[filter:crud_extension]
paste.filter_factory = keystone.contrib.admin_crud:CrudExtension.factory
[filter:ec2_extension]
paste.filter_factory = keystone.contrib.ec2:Ec2Extension.factory
[filter:s3_extension]
paste.filter_factory = keystone.contrib.s3:S3Extension.factory
[filter:url_normalize]
paste.filter_factory = keystone.middleware:NormalizingFilter.factory
[filter:sizelimit]
paste.filter_factory = keystone.middleware:RequestBodySizeLimiter.factory
[filter:stats_monitoring]
paste.filter_factory = keystone.contrib.stats:StatsMiddleware.factory
[filter:stats_reporting]
paste.filter_factory = keystone.contrib.stats:StatsExtension.factory
[filter:access_log]
paste.filter_factory = keystone.contrib.access:AccessLogMiddleware.factory
[app:public_service]
paste.app_factory = keystone.service:public_app_factory
[app:service_v3]
paste.app_factory = keystone.service:v3_app_factory
[app:admin_service]
paste.app_factory = keystone.service:admin_app_factory
[pipeline:public_api]
pipeline = access_log sizelimit stats_monitoring url_normalize token_auth admin_token_auth xml_body json_body debug ec2_extension user_crud_extension public_service
[pipeline:admin_api]
pipeline = access_log sizelimit stats_monitoring url_normalize token_auth admin_token_auth xml_body json_body debug stats_reporting ec2_extension s3_extension crud_extension admin_service
[pipeline:api_v3]
pipeline = access_log sizelimit stats_monitoring url_normalize token_auth admin_token_auth xml_body json_body debug stats_reporting ec2_extension s3_extension service_v3
[app:public_version_service]
paste.app_factory = keystone.service:public_version_app_factory
[app:admin_version_service]
paste.app_factory = keystone.service:admin_version_app_factory
[pipeline:public_version_api]
pipeline = access_log sizelimit stats_monitoring url_normalize xml_body public_version_service
[pipeline:admin_version_api]
pipeline = access_log sizelimit stats_monitoring url_normalize xml_body admin_version_service
[composite:main]
use = egg:Paste#urlmap
/v2.0 = public_api
/v3 = api_v3
/ = public_version_api
[composite:admin]
use = egg:Paste#urlmap
/v2.0 = admin_api
/v3 = api_v3
/ = admin_version_api

57
doc/training-guide/training-labs/Scripts/Neutron/Neutron.sh Normal file
View File

@ -0,0 +1,57 @@
#!/bin/sh
#
# About:Setup Dependences for Virtual Box Sandbox
# meant for OpenStack Labs.
#
# Contact: pranav@aptira.com
# Copyright : Aptira @aptira,aptira.com
# License: Apache Software License (ASL) 2.0
###############################################################################
# #
# This Script will install Neutron related packages and after installaion, it #
# will configure Neutron, populate the database. #
# #
###############################################################################
# Note: You DoNot Need Internet for this due to the magic of --download-only
echo "Internet connection is not required for this script to run"
Neutron_SingleNode() {
# 1. Install Neutron, OVS etc.
apt-get install -y quantum-server openvswitch-switch openvswitch-datapath-dkms quantum-plugin-openvswitch quantum-plugin-openvswitch-agent dnsmasq quantum-dhcp-agent quantum-l3-agent
#br-int will be used for VM integration
ovs-vsctl add-br br-int
#br-ex is used to make to access the internet (not covered in this guide)
ovs-vsctl add-br br-ex
cp --no-preserve=mode,ownership Templates/SingleNode/interfaces-single /etc/network/interfaces
ovs-vsctl add-port br-ex eth1
#iptables --table nat --append POSTROUTING --out-interface eth2 -j MASQUERADE # May need to do this ...
#ptables --append FORWARD --in-interface br-ex -j ACCEPT
# 2. Configure Quantum Configuration files
cp --no-preserve=mode,ownership Templates/SingleNode/ovs_quantum_plugin.ini /etc/quantum/plugins/openvswitch/ovs_quantum_plugin.ini
cp --no-preserve=mode,ownership Templates/SingleNode/api-paste.ini /etc/quantum/api-paste.ini
cp --no-preserve=mode,ownership Templates/SingleNode/quantum.conf /etc/quantum/quantum.conf
cp --no-preserve=mode,ownership Templates/SingleNode/metadata_agent.ini /etc/quantum/metadata_agent.ini
# 3. Restart Quantum Server
for i in $( ls /etc/init.d/quantum-* ); do sudo $i restart; done
service dnsmasq restart
}
Neutron_MultiNode() {
# Single Node For Now.
Neutron_SingleNode
}
# For Now its just single Node
if [ "$1" == "Single" ]; then
Neutron_SingleNode
else
Neutron_MultiNode
fi

30
doc/training-guide/training-labs/Scripts/Neutron/Templates/SingleNode/api-paste.ini Normal file
View File

@ -0,0 +1,30 @@
[composite:quantum]
use = egg:Paste#urlmap
/: quantumversions
/v2.0: quantumapi_v2_0
[composite:quantumapi_v2_0]
use = call:quantum.auth:pipeline_factory
noauth = extensions quantumapiapp_v2_0
keystone = authtoken keystonecontext extensions quantumapiapp_v2_0
[filter:keystonecontext]
paste.filter_factory = quantum.auth:QuantumKeystoneContext.factory
[filter:authtoken]
paste.filter_factory = keystoneclient.middleware.auth_token:filter_factory
auth_host = 10.10.10.51
auth_port = 35357
auth_protocol = http
admin_tenant_name = service
admin_user = quantum
admin_password = service_pass
[filter:extensions]
paste.filter_factory = quantum.api.extensions:plugin_aware_extension_middleware_factory
[app:quantumversions]
paste.app_factory = quantum.api.versions:Versions.factory
[app:quantumapiapp_v2_0]
paste.app_factory = quantum.api.v2.router:APIRouter.factory

34
doc/training-guide/training-labs/Scripts/Neutron/Templates/SingleNode/interfaces-single Normal file
View File

@ -0,0 +1,34 @@
# interfaces(5) file used by ifup(8) and ifdown(8)
# local loopback
auto lo
iface lo inet loopback
# Virtual Box NAT -- for internet access to VM
auto eth2
iface eth2 inet static
# OpenStack Single Node.
# OpenStack Management Network
auto eth0
iface eth0 inet static
address 10.10.10.51
netmask 255.255.255.0
gateway 10.10.10.1
# Expose OpenStack API to External Network/Internet
auto eth1
iface eth1 inet manual
up ifconfig $IFACE 0.0.0.0 up
up ip link set $IFACE promisc on
down ip link set $IFACE promisc off
down ifconfig $IFACE down
# VM internet Access
auto br-ex
iface br-ex inet static
address 192.168.100.51
netmask 255.255.255.0
gateway 192.168.100.1
dns-nameservers 8.8.8.8

26
doc/training-guide/training-labs/Scripts/Neutron/Templates/SingleNode/metadata_agent.ini Normal file
View File

@ -0,0 +1,26 @@
[DEFAULT]
# Show debugging output in log (sets DEBUG log level output)
# debug = True
auth_url = http://10.10.10.51:35357/v2.0
auth_region = RegionOne
admin_tenant_name = service
admin_user = quantum
admin_password = service_pass
metadata_proxy_shared_secret = OpenStack_Training
# The Quantum user information for accessing the Quantum API.
auth_url = http://localhost:35357/v2.0
# IP address used by Nova metadata server
nova_metadata_ip = 127.0.0.1
# TCP Port used by Nova metadata server
nova_metadata_port = 8775
# When proxying metadata requests, Quantum signs the Instance-ID header with a
# shared secret to prevent spoofing. You may select any string for a secret,
# but it must match here and in the configuration used by the Nova Metadata
# Server. NOTE: Nova uses a different key: quantum_metadata_proxy_shared_secret
# metadata_proxy_shared_secret =

140
doc/training-guide/training-labs/Scripts/Neutron/Templates/SingleNode/ovs_quantum_plugin.ini Normal file
View File

@ -0,0 +1,140 @@
[DATABASE]
# This line MUST be changed to actually run the plugin.
# Example:
# sql_connection = mysql://root:nova@127.0.0.1:3306/ovs_quantum
# Replace 127.0.0.1 above with the IP address of the database used by the
# main quantum server. (Leave it as is if the database runs on this host.)
sql_connection = mysql://quantumUser:quantumPass@10.10.10.51/quantum
# Database reconnection retry times - in event connectivity is lost
# set to -1 implies an infinite retry count
# sql_max_retries = 10
# Database reconnection interval in seconds - if the initial connection to the
# database fails
reconnect_interval = 2
# Enable the use of eventlets db_pool for MySQL. The flags sql_min_pool_size,
# sql_max_pool_size and sql_idle_timeout are relevant only if this is enabled.
# sql_dbpool_enable = False
# Minimum number of SQL connections to keep open in a pool
# sql_min_pool_size = 1
# Maximum number of SQL connections to keep open in a pool
# sql_max_pool_size = 5
# Timeout in seconds before idle sql connections are reaped
# sql_idle_timeout = 3600
# Maximum number of SQL connections to keep open in a QueuePool in SQLAlchemy
# Example sqlalchemy_pool_size = 5
# Maximum number of overflow connections in a QueuePool in SQLAlchemy
# Example sqlalchemy_max_overflow = 10
# Timeout of the open connections QueuePool in SQLAlchemy
# Example sqlalchemy_pool_timeout = 30
[OVS]
tenant_network_type = gre
tunnel_id_ranges = 1:1000
integration_bridge = br-int
tunnel_bridge = br-tun
local_ip = 10.10.10.51
enable_tunneling = True
# (StrOpt) Type of network to allocate for tenant networks. The
# default value 'local' is useful only for single-box testing and
# provides no connectivity between hosts. You MUST either change this
# to 'vlan' and configure network_vlan_ranges below or change this to
# 'gre' and configure tunnel_id_ranges below in order for tenant
# networks to provide connectivity between hosts. Set to 'none' to
# disable creation of tenant networks.
#
# Default: tenant_network_type = local
# Example: tenant_network_type = gre
# (ListOpt) Comma-separated list of
# <physical_network>[:<vlan_min>:<vlan_max>] tuples enumerating ranges
# of VLAN IDs on named physical networks that are available for
# allocation. All physical networks listed are available for flat and
# VLAN provider network creation. Specified ranges of VLAN IDs are
# available for tenant network allocation if tenant_network_type is
# 'vlan'. If empty, only gre and local networks may be created.
#
# Default: network_vlan_ranges =
# Example: network_vlan_ranges = physnet1:1000:2999
# (BoolOpt) Set to True in the server and the agents to enable support
# for GRE networks. Requires kernel support for OVS patch ports and
# GRE tunneling.
#
# Default: enable_tunneling = False
# (ListOpt) Comma-separated list of <tun_min>:<tun_max> tuples
# enumerating ranges of GRE tunnel IDs that are available for tenant
# network allocation if tenant_network_type is 'gre'.
#
# Default: tunnel_id_ranges =
# Example: tunnel_id_ranges = 1:1000
# Do not change this parameter unless you have a good reason to.
# This is the name of the OVS integration bridge. There is one per hypervisor.
# The integration bridge acts as a virtual "patch bay". All VM VIFs are
# attached to this bridge and then "patched" according to their network
# connectivity.
#
# Default: integration_bridge = br-int
# Only used for the agent if tunnel_id_ranges (above) is not empty for
# the server. In most cases, the default value should be fine.
#
# Default: tunnel_bridge = br-tun
# Peer patch port in integration bridge for tunnel bridge
# int_peer_patch_port = patch-tun
# Peer patch port in tunnel bridge for integration bridge
# tun_peer_patch_port = patch-int
# Uncomment this line for the agent if tunnel_id_ranges (above) is not
# empty for the server. Set local-ip to be the local IP address of
# this hypervisor.
#
# Default: local_ip =
# (ListOpt) Comma-separated list of <physical_network>:<bridge> tuples
# mapping physical network names to the agent's node-specific OVS
# bridge names to be used for flat and VLAN networks. The length of
# bridge names should be no more than 11. Each bridge must
# exist, and should have a physical network interface configured as a
# port. All physical networks listed in network_vlan_ranges on the
# server should have mappings to appropriate bridges on each agent.
#
# Default: bridge_mappings =
# Example: bridge_mappings = physnet1:br-eth1
[AGENT]
# Agent's polling interval in seconds
polling_interval = 2
[SECURITYGROUP]
# Firewall driver for realizing quantum security group function
# firewall_driver = quantum.agent.linux.iptables_firewall.OVSHybridIptablesFirewallDriver
firewall_driver = quantum.agent.linux.iptables_firewall.OVSHybridIptablesFirewallDriver
#-----------------------------------------------------------------------------
# Sample Configurations.
#-----------------------------------------------------------------------------
#
# 1. With VLANs on eth1.
# [DATABASE]
# sql_connection = mysql://root:nova@127.0.0.1:3306/ovs_quantum
# [OVS]
# network_vlan_ranges = default:2000:3999
# tunnel_id_ranges =
# integration_bridge = br-int
# bridge_mappings = default:br-eth1
# [AGENT]
# Add the following setting, if you want to log to a file
#
# 2. With tunneling.
# [DATABASE]
# sql_connection = mysql://root:nova@127.0.0.1:3306/ovs_quantum
# [OVS]
# network_vlan_ranges =
# tunnel_id_ranges = 1:1000
# integration_bridge = br-int
# tunnel_bridge = br-tun
# local_ip = 10.0.0.3

289
doc/training-guide/training-labs/Scripts/Neutron/Templates/SingleNode/quantum.conf Normal file
View File

@ -0,0 +1,289 @@
[DEFAULT]
# Default log level is INFO
# verbose and debug has the same result.
# One of them will set DEBUG log level output
# debug = False
# verbose = False
# Where to store Quantum state files. This directory must be writable by the
# user executing the agent.
# state_path = /var/lib/quantum
# Where to store lock files
lock_path = $state_path/lock
# log_format = %(asctime)s %(levelname)8s [%(name)s] %(message)s
# log_date_format = %Y-%m-%d %H:%M:%S
# use_syslog -> syslog
# log_file and log_dir -> log_dir/log_file
# (not log_file) and log_dir -> log_dir/{binary_name}.log
# use_stderr -> stderr
# (not user_stderr) and (not log_file) -> stdout
# publish_errors -> notification system
# use_syslog = False
# syslog_log_facility = LOG_USER
# use_stderr = True
# log_file =
# log_dir =
# publish_errors = False
# Address to bind the API server
bind_host = 0.0.0.0
# Port the bind the API server to
bind_port = 9696
# Path to the extensions. Note that this can be a colon-separated list of
# paths. For example:
# api_extensions_path = extensions:/path/to/more/extensions:/even/more/extensions
# The __path__ of quantum.extensions is appended to this, so if your
# extensions are in there you don't need to specify them here
# api_extensions_path =
# Quantum plugin provider module
# core_plugin =
core_plugin = quantum.plugins.openvswitch.ovs_quantum_plugin.OVSQuantumPluginV2
# Advanced service modules
# service_plugins =
# Paste configuration file
api_paste_config = /etc/quantum/api-paste.ini
# The strategy to be used for auth.
# Supported values are 'keystone'(default), 'noauth'.
# auth_strategy = keystone
# Base MAC address. The first 3 octets will remain unchanged. If the
# 4h octet is not 00, it will also used. The others will be
# randomly generated.
# 3 octet
# base_mac = fa:16:3e:00:00:00
# 4 octet
# base_mac = fa:16:3e:4f:00:00
# Maximum amount of retries to generate a unique MAC address
# mac_generation_retries = 16
# DHCP Lease duration (in seconds)
# dhcp_lease_duration = 120
# Allow sending resource operation notification to DHCP agent
# dhcp_agent_notification = True
# Enable or disable bulk create/update/delete operations
# allow_bulk = True
# Enable or disable pagination
# allow_pagination = False
# Enable or disable sorting
# allow_sorting = False
# Enable or disable overlapping IPs for subnets
# Attention: the following parameter MUST be set to False if Quantum is
# being used in conjunction with nova security groups and/or metadata service.
# allow_overlapping_ips = False
# Ensure that configured gateway is on subnet
# force_gateway_on_subnet = False
# RPC configuration options. Defined in rpc __init__
# The messaging module to use, defaults to kombu.
# rpc_backend = quantum.openstack.common.rpc.impl_kombu
# Size of RPC thread pool
# rpc_thread_pool_size = 64,
# Size of RPC connection pool
# rpc_conn_pool_size = 30
# Seconds to wait for a response from call or multicall
# rpc_response_timeout = 60
# Seconds to wait before a cast expires (TTL). Only supported by impl_zmq.
# rpc_cast_timeout = 30
# Modules of exceptions that are permitted to be recreated
# upon receiving exception data from an rpc call.
# allowed_rpc_exception_modules = quantum.openstack.common.exception, nova.exception
# AMQP exchange to connect to if using RabbitMQ or QPID
control_exchange = quantum
# If passed, use a fake RabbitMQ provider
# fake_rabbit = False
# Configuration options if sending notifications via kombu rpc (these are
# the defaults)
# SSL version to use (valid only if SSL enabled)
# kombu_ssl_version =
# SSL key file (valid only if SSL enabled)
# kombu_ssl_keyfile =
# SSL cert file (valid only if SSL enabled)
# kombu_ssl_certfile =
# SSL certification authority file (valid only if SSL enabled)'
# kombu_ssl_ca_certs =
# IP address of the RabbitMQ installation
# rabbit_host = localhost
# Password of the RabbitMQ server
# rabbit_password = guest
# Port where RabbitMQ server is running/listening
# rabbit_port = 5672
# RabbitMQ single or HA cluster (host:port pairs i.e: host1:5672, host2:5672)
# rabbit_hosts is defaulted to '$rabbit_host:$rabbit_port'
# rabbit_hosts = localhost:5672
# User ID used for RabbitMQ connections
# rabbit_userid = guest
# Location of a virtual RabbitMQ installation.
# rabbit_virtual_host = /
# Maximum retries with trying to connect to RabbitMQ
# (the default of 0 implies an infinite retry count)
# rabbit_max_retries = 0
# RabbitMQ connection retry interval
# rabbit_retry_interval = 1
# Use HA queues in RabbitMQ (x-ha-policy: all).You need to
# wipe RabbitMQ database when changing this option. (boolean value)
# rabbit_ha_queues = false
# QPID
# rpc_backend=quantum.openstack.common.rpc.impl_qpid
# Qpid broker hostname
# qpid_hostname = localhost
# Qpid broker port
# qpid_port = 5672
# Qpid single or HA cluster (host:port pairs i.e: host1:5672, host2:5672)
# qpid_hosts is defaulted to '$qpid_hostname:$qpid_port'
# qpid_hosts = localhost:5672
# Username for qpid connection
# qpid_username = ''
# Password for qpid connection
# qpid_password = ''
# Space separated list of SASL mechanisms to use for auth
# qpid_sasl_mechanisms = ''
# Seconds between connection keepalive heartbeats
# qpid_heartbeat = 60
# Transport to use, either 'tcp' or 'ssl'
# qpid_protocol = tcp
# Disable Nagle algorithm
# qpid_tcp_nodelay = True
# ZMQ
# rpc_backend=quantum.openstack.common.rpc.impl_zmq
# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
# The "host" option should point or resolve to this address.
# rpc_zmq_bind_address = *
# ============ Notification System Options =====================
# Notifications can be sent when network/subnet/port are create, updated or deleted.
# There are three methods of sending notifications: logging (via the
# log_file directive), rpc (via a message queue) and
# noop (no notifications sent, the default)
# Notification_driver can be defined multiple times
# Do nothing driver
# notification_driver = quantum.openstack.common.notifier.no_op_notifier
# Logging driver
# notification_driver = quantum.openstack.common.notifier.log_notifier
# RPC driver. DHCP agents needs it.
notification_driver = quantum.openstack.common.notifier.rpc_notifier
# default_notification_level is used to form actual topic name(s) or to set logging level
default_notification_level = INFO
# default_publisher_id is a part of the notification payload
# host = myhost.com
# default_publisher_id = $host
# Defined in rpc_notifier, can be comma separated values.
# The actual topic names will be %s.%(default_notification_level)s
notification_topics = notifications
# Default maximum number of items returned in a single response,
# value == infinite and value < 0 means no max limit, and value must
# greater than 0. If the number of items requested is greater than
# pagination_max_limit, server will just return pagination_max_limit
# of number of items.
# pagination_max_limit = -1
# Maximum number of DNS nameservers per subnet
# max_dns_nameservers = 5
# Maximum number of host routes per subnet
# max_subnet_host_routes = 20
# Maximum number of fixed ips per port
# max_fixed_ips_per_port = 5
# =========== items for agent management extension =============
# Seconds to regard the agent as down.
# agent_down_time = 5
# =========== end of items for agent management extension =====
# =========== items for agent scheduler extension =============
# Driver to use for scheduling network to DHCP agent
# network_scheduler_driver = quantum.scheduler.dhcp_agent_scheduler.ChanceScheduler
# Driver to use for scheduling router to a default L3 agent
# router_scheduler_driver = quantum.scheduler.l3_agent_scheduler.ChanceScheduler
# Allow auto scheduling networks to DHCP agent. It will schedule non-hosted
# networks to first DHCP agent which sends get_active_networks message to
# quantum server
# network_auto_schedule = True
# Allow auto scheduling routers to L3 agent. It will schedule non-hosted
# routers to first L3 agent which sends sync_routers message to quantum server
# router_auto_schedule = True
# =========== end of items for agent scheduler extension =====
[QUOTAS]
# resource name(s) that are supported in quota features
# quota_items = network,subnet,port
# default number of resource allowed per tenant, minus for unlimited
# default_quota = -1
# number of networks allowed per tenant, and minus means unlimited
# quota_network = 10
# number of subnets allowed per tenant, and minus means unlimited
# quota_subnet = 10
# number of ports allowed per tenant, and minus means unlimited
# quota_port = 50
# number of security groups allowed per tenant, and minus means unlimited
# quota_security_group = 10
# number of security group rules allowed per tenant, and minus means unlimited
# quota_security_group_rule = 100
# default driver to use for quota checks
# quota_driver = quantum.quota.ConfDriver
[DEFAULT_SERVICETYPE]
# Description of the default service type (optional)
# description = "default service type"
# Enter a service definition line for each advanced service provided
# by the default service type.
# Each service definition should be in the following format:
# <service>:<plugin>[:driver]
[AGENT]
# Use "sudo quantum-rootwrap /etc/quantum/rootwrap.conf" to use the real
# root filter facility.
# Change to "sudo" to skip the filtering and just run the comand directly
# root_helper = sudo
root_helper = sudo quantum-rootwrap /etc/quantum/rootwrap.conf
# =========== items for agent management extension =============
# seconds between nodes reporting state to server, should be less than
# agent_down_time
# report_interval = 4
# =========== end of items for agent management extension =====
[keystone_authtoken]
auth_host = 10.10.10.51
auth_port = 35357
auth_protocol = http
admin_tenant_name = service
admin_user = quantum
admin_password = service_pass
signing_dir = /var/lib/quantum/keystone-signing

61
doc/training-guide/training-labs/Scripts/Nova/Nova.sh Normal file
View File

@ -0,0 +1,61 @@
#!/bin/sh
#
# About:Setup Dependences for Virtual Box Sandbox
# meant for OpenStack Labs.
#
# Contact: pranav@aptira.com
# Copyright : Aptira @aptira,aptira.com
# License: Apache Software License (ASL) 2.0
###############################################################################
# #
# This Script will install Nova related packages and after installaion, it #
# will configure Nova, populate the database. #
# #
###############################################################################
# Note: You DoNot Need Internet for this due to the magic of --download-only
echo "Internet connection is not required for this script to run"
Nova_SingleNode() {
# 1. Install Nova, OVS etc.
apt-get install -y kvm libvirt-bin pm-utils nova-api nova-cert novnc nova-consoleauth nova-scheduler nova-novncproxy nova-doc nova-conductor nova-compute-kvm
# 2. Configure Nova Configuration files
cp --no-preserve=mode,ownership Templates/SingleNode/nova/api-paste.ini /etc/nova/api-paste.ini
cp --no-preserve=mode,ownership Templates/SingleNode/nova/nova.conf /etc/nova/nova.conf
cp --no-preserve=mode,ownership Templates/SingleNode/libvirt/qemu.conf /etc/libvirt/qemu.conf
cp --no-preserve=mode,ownership Templates/SingleNode/libvirt/libvirtd.conf /etc/libvirt/libvirtd.conf
cp --no-preserve=mode,ownership Templates/SingleNode/libvirt/libvirt-bin.conf /etc/init/libvirt-bin.conf
cp --no-preserve=mode,ownership Templates/SingleNode/libvirt/libvirt-bin /etc/default/libvirt-bin
cp --no-preserve=mode,ownership Templates/SingleNode/nova/nova-compute.conf /etc/nova/nova-compute.conf
# Destroy Default Virtual Bridges
virsh net-destroy default
virsh net-undefine default
service dbus restart && service libvirt-bin restart
# 3. Synch Database
nova-manage db sync
# 4. Restart Nova Services
for i in $( ls /etc/init.d/nova-* ); do sudo $i restart; done
# 5. This is just because I like to see the smiley faces :)
nova-manage service list
}
Nova_MultiNode() {
# Single Node For Now.
Nova_SingleNode
}
# For Now its just single Node
if [ "$1" == "Single" ]; then
Nova_SingleNode
else
Nova_MultiNode
fi

11
doc/training-guide/training-labs/Scripts/Nova/Templates/SingleNode/libvirt/libvirt-bin Normal file
View File

@ -0,0 +1,11 @@
# Defaults for libvirt-bin initscript (/etc/init.d/libvirt-bin)
# This is a POSIX shell fragment
# Start libvirtd to handle qemu/kvm:
start_libvirtd="yes"
# options passed to libvirtd, add "-l" to listen on tcp
libvirtd_opts="-d -l"
# pass in location of kerberos keytab
#export KRB5_KTNAME=/etc/libvirt/libvirt.keytab

88
doc/training-guide/training-labs/Scripts/Nova/Templates/SingleNode/libvirt/libvirt-bin.conf Normal file
View File

@ -0,0 +1,88 @@
description "libvirt daemon"
author "Dustin Kirkland <kirkland@canonical.com>"
start on runlevel [2345]
stop on starting rc RUNLEVEL=[016]
expect daemon
respawn
# daemonize
env libvirtd_opts="-d -l"
# whether libvirtd should run at boot/shutdown
env start_libvirtd="yes"
# by default wait 30 seconds for vms to shut down
env libvirtd_shutdown_timeout=30
# uris for which to shut down vms
env libvirt_uris='qemu:///system lxc:///'
pre-start script
[ -r /etc/default/libvirt-bin ] && . /etc/default/libvirt-bin
[ ! "x$start_libvirtd" = "xyes" ] && { stop; exit 0; }
mkdir -p /var/run/libvirt
# Clean up a pidfile that might be left around
rm -f /var/run/libvirtd.pid
end script
pre-stop script
[ -r /etc/default/libvirt-bin ] && . /etc/default/libvirt-bin
log_msg()
{
logf="/var/log/libvirt/shutdownlog.log"
logger -p daemon.debug -s -t libvirt -- "$@" >> $logf 2>&1
}
run_virsh()
{
# We parse the output for things like domain state;
# make sure the output is in the language we expect.
LANG=C virsh "$@"
}
if [ -z "$RUNLEVEL" ]; then
exit 0
fi
if [ "$RUNLEVEL" -ne 0 ] && [ "$RUNLEVEL" -ne 1 ] && [ "$RUNLEVEL" -ne 6 ]; then
exit 0
fi
log_msg "libvirt-bin: entering pre-stop at $(date)"
for uri in $libvirt_uris; do
for domain in $(run_virsh -c "$uri" list | awk '$3 == "running" {print $2}'); do
log_msg "libvirt-bin: attempting clean shutdown of $domain at $(date)"
run_virsh -c "$uri" shutdown "$domain" >/dev/null
done
done
delay=$libvirtd_shutdown_timeout
while [ $delay -gt 0 ]; do
for uri in $libvirt_uris; do
if ! run_virsh -c "$uri" list | awk '$3 == "running" {exit 1}'; then
# VMs at this URI are still running. Wait, then
# start at the beginning looking for running VMs.
sleep 1
delay=$(($delay - 1))
continue 2
fi
done
break
done
for uri in $libvirt_uris; do
for domain in $(run_virsh -c "$uri" list | awk '$3 == "running" {print $2}'); do
log_msg "destroying $domain"
run_virsh -c "$uri" destroy "$domain" >/dev/null
done
done
log_msg "libvirt-bin: exiting pre-stop at $(date)"
end script
# /etc/default/libvirt-bin will be deprecated soon.
# If you used to set $libvirtd_opts in /etc/default/libvirt-bin,
# change the 'exec' line here instead.
script
[ -r /etc/default/libvirt-bin ] && . /etc/default/libvirt-bin
exec /usr/sbin/libvirtd $libvirtd_opts
end script

395
doc/training-guide/training-labs/Scripts/Nova/Templates/SingleNode/libvirt/libvirtd.conf Normal file
View File

@ -0,0 +1,395 @@
# Master libvirt daemon configuration file
#
# For further information consult http://libvirt.org/format.html
#
# NOTE: the tests/daemon-conf regression test script requires
# that each "PARAMETER = VALUE" line in this file have the parameter
# name just after a leading "#".
#################################################################
#
# Network connectivity controls
#
# Flag listening for secure TLS connections on the public TCP/IP port.
# NB, must pass the --listen flag to the libvirtd process for this to
# have any effect.
#
# It is necessary to setup a CA and issue server certificates before
# using this capability.
#
# This is enabled by default, uncomment this to disable it
listen_tls = 0
# Listen for unencrypted TCP connections on the public TCP/IP port.
# NB, must pass the --listen flag to the libvirtd process for this to
# have any effect.
#
# Using the TCP socket requires SASL authentication by default. Only
# SASL mechanisms which support data encryption are allowed. This is
# DIGEST_MD5 and GSSAPI (Kerberos5)
#
# This is disabled by default, uncomment this to enable it.
listen_tcp = 1
# Override the port for accepting secure TLS connections
# This can be a port number, or service name
#
#tls_port = "16514"
# Override the port for accepting insecure TCP connections
# This can be a port number, or service name
#
#tcp_port = "16509"
# Override the default configuration which binds to all network
# interfaces. This can be a numeric IPv4/6 address, or hostname
#
#listen_addr = "192.168.0.1"
# Flag toggling mDNS advertizement of the libvirt service.
#
# Alternatively can disable for all services on a host by
# stopping the Avahi daemon
#
# This is disabled by default, uncomment this to enable it
#mdns_adv = 1
# Override the default mDNS advertizement name. This must be
# unique on the immediate broadcast network.
#
# The default is "Virtualization Host HOSTNAME", where HOSTNAME
# is subsituted for the short hostname of the machine (without domain)
#
#mdns_name = "Virtualization Host Joe Demo"
#################################################################
#
# UNIX socket access controls
#
# Set the UNIX domain socket group ownership. This can be used to
# allow a 'trusted' set of users access to management capabilities
# without becoming root.
#
# This is restricted to 'root' by default.
unix_sock_group = "libvirtd"
# Set the UNIX socket permissions for the R/O socket. This is used
# for monitoring VM status only
#
# Default allows any user. If setting group ownership may want to
# restrict this to:
#unix_sock_ro_perms = "0777"
# Set the UNIX socket permissions for the R/W socket. This is used
# for full management of VMs
#
# Default allows only root. If PolicyKit is enabled on the socket,
# the default will change to allow everyone (eg, 0777)
#
# If not using PolicyKit and setting group ownership for access
# control then you may want to relax this to:
unix_sock_rw_perms = "0770"
# Set the name of the directory in which sockets will be found/created.
#unix_sock_dir = "/var/run/libvirt"
#################################################################
#
# Authentication.
#
# - none: do not perform auth checks. If you can connect to the
# socket you are allowed. This is suitable if there are
# restrictions on connecting to the socket (eg, UNIX
# socket permissions), or if there is a lower layer in
# the network providing auth (eg, TLS/x509 certificates)
#
# - sasl: use SASL infrastructure. The actual auth scheme is then
# controlled from /etc/sasl2/libvirt.conf. For the TCP
# socket only GSSAPI & DIGEST-MD5 mechanisms will be used.
# For non-TCP or TLS sockets, any scheme is allowed.
#
# - polkit: use PolicyKit to authenticate. This is only suitable
# for use on the UNIX sockets. The default policy will
# require a user to supply their own password to gain
# full read/write access (aka sudo like), while anyone
# is allowed read/only access.
#
# Set an authentication scheme for UNIX read-only sockets
# By default socket permissions allow anyone to connect
#
# To restrict monitoring of domains you may wish to enable
# an authentication mechanism here
auth_unix_ro = "none"
# Set an authentication scheme for UNIX read-write sockets
# By default socket permissions only allow root. If PolicyKit
# support was compiled into libvirt, the default will be to
# use 'polkit' auth.
#
# If the unix_sock_rw_perms are changed you may wish to enable
# an authentication mechanism here
auth_unix_rw = "none"
# Change the authentication scheme for TCP sockets.
#
# If you don't enable SASL, then all TCP traffic is cleartext.
# Don't do this outside of a dev/test scenario. For real world
# use, always enable SASL and use the GSSAPI or DIGEST-MD5
# mechanism in /etc/sasl2/libvirt.conf
auth_tcp = "none"
# Change the authentication scheme for TLS sockets.
#
# TLS sockets already have encryption provided by the TLS
# layer, and limited authentication is done by certificates
#
# It is possible to make use of any SASL authentication
# mechanism as well, by using 'sasl' for this option
#auth_tls = "none"
#################################################################
#
# TLS x509 certificate configuration
#
# Override the default server key file path
#
#key_file = "/etc/pki/libvirt/private/serverkey.pem"
# Override the default server certificate file path
#
#cert_file = "/etc/pki/libvirt/servercert.pem"
# Override the default CA certificate path
#
#ca_file = "/etc/pki/CA/cacert.pem"
# Specify a certificate revocation list.
#
# Defaults to not using a CRL, uncomment to enable it
#crl_file = "/etc/pki/CA/crl.pem"
#################################################################
#
# Authorization controls
#
# Flag to disable verification of our own server certificates
#
# When libvirtd starts it performs some sanity checks against
# its own certificates.
#
# Default is to always run sanity checks. Uncommenting this
# will disable sanity checks which is not a good idea
#tls_no_sanity_certificate = 1
# Flag to disable verification of client certificates
#
# Client certificate verification is the primary authentication mechanism.
# Any client which does not present a certificate signed by the CA
# will be rejected.
#
# Default is to always verify. Uncommenting this will disable
# verification - make sure an IP whitelist is set
#tls_no_verify_certificate = 1
# A whitelist of allowed x509 Distinguished Names
# This list may contain wildcards such as
#
# "C=GB,ST=London,L=London,O=Red Hat,CN=*"
#
# See the POSIX fnmatch function for the format of the wildcards.
#
# NB If this is an empty list, no client can connect, so comment out
# entirely rather than using empty list to disable these checks
#
# By default, no DN's are checked
#tls_allowed_dn_list = ["DN1", "DN2"]
# A whitelist of allowed SASL usernames. The format for usernames
# depends on the SASL authentication mechanism. Kerberos usernames
# look like username@REALM
#
# This list may contain wildcards such as
#
# "*@EXAMPLE.COM"
#
# See the POSIX fnmatch function for the format of the wildcards.
#
# NB If this is an empty list, no client can connect, so comment out
# entirely rather than using empty list to disable these checks
#
# By default, no Username's are checked
#sasl_allowed_username_list = ["joe@EXAMPLE.COM", "fred@EXAMPLE.COM" ]
#################################################################
#
# Processing controls
#
# The maximum number of concurrent client connections to allow
# over all sockets combined.
#max_clients = 20
# The minimum limit sets the number of workers to start up
# initially. If the number of active clients exceeds this,
# then more threads are spawned, up to max_workers limit.
# Typically you'd want max_workers to equal maximum number
# of clients allowed
#min_workers = 5
#max_workers = 20
# The number of priority workers. If all workers from above
# pool will stuck, some calls marked as high priority
# (notably domainDestroy) can be executed in this pool.
#prio_workers = 5
# Total global limit on concurrent RPC calls. Should be
# at least as large as max_workers. Beyond this, RPC requests
# will be read into memory and queued. This directly impact
# memory usage, currently each request requires 256 KB of
# memory. So by default up to 5 MB of memory is used
#
# XXX this isn't actually enforced yet, only the per-client
# limit is used so far
#max_requests = 20
# Limit on concurrent requests from a single client
# connection. To avoid one client monopolizing the server
# this should be a small fraction of the global max_requests
# and max_workers parameter
#max_client_requests = 5
#################################################################
#
# Logging controls
#
# Logging level: 4 errors, 3 warnings, 2 information, 1 debug
# basically 1 will log everything possible
#log_level = 3
# Logging filters:
# A filter allows to select a different logging level for a given category
# of logs
# The format for a filter is one of:
# x:name
# x:+name
# where name is a string which is matched against source file name,
# e.g., "remote", "qemu", or "util/json", the optional "+" prefix
# tells libvirt to log stack trace for each message matching name,
# and x is the minimal level where matching messages should be logged:
# 1: DEBUG
# 2: INFO
# 3: WARNING
# 4: ERROR
#
# Multiple filter can be defined in a single @filters, they just need to be
# separated by spaces.
#
# e.g. to only get warning or errors from the remote layer and only errors
# from the event layer:
#log_filters="3:remote 4:event"
# Logging outputs:
# An output is one of the places to save logging information
# The format for an output can be:
# x:stderr
# output goes to stderr
# x:syslog:name
# use syslog for the output and use the given name as the ident
# x:file:file_path
# output to a file, with the given filepath
# In all case the x prefix is the minimal level, acting as a filter
# 1: DEBUG
# 2: INFO
# 3: WARNING
# 4: ERROR
#
# Multiple output can be defined, they just need to be separated by spaces.
# e.g. to log all warnings and errors to syslog under the libvirtd ident:
#log_outputs="3:syslog:libvirtd"
#
# Log debug buffer size: default 64
# The daemon keeps an internal debug log buffer which will be dumped in case
# of crash or upon receiving a SIGUSR2 signal. This setting allows to override
# the default buffer size in kilobytes.
# If value is 0 or less the debug log buffer is deactivated
#log_buffer_size = 64
##################################################################
#
# Auditing
#
# This setting allows usage of the auditing subsystem to be altered:
#
# audit_level == 0 -> disable all auditing
# audit_level == 1 -> enable auditing, only if enabled on host (default)
# audit_level == 2 -> enable auditing, and exit if disabled on host
#
#audit_level = 2
#
# If set to 1, then audit messages will also be sent
# via libvirt logging infrastructure. Defaults to 0
#
#audit_logging = 1
###################################################################
# UUID of the host:
# Provide the UUID of the host here in case the command
# 'dmidecode -s system-uuid' does not provide a valid uuid. In case
# 'dmidecode' does not provide a valid UUID and none is provided here, a
# temporary UUID will be generated.
# Keep the format of the example UUID below. UUID must not have all digits
# be the same.
# NB This default all-zeros UUID will not work. Replace
# it with the output of the 'uuidgen' command and then
# uncomment this entry
#host_uuid = "00000000-0000-0000-0000-000000000000"
###################################################################
# Keepalive protocol:
# This allows libvirtd to detect broken client connections or even
# dead client. A keepalive message is sent to a client after
# keepalive_interval seconds of inactivity to check if the client is
# still responding; keepalive_count is a maximum number of keepalive
# messages that are allowed to be sent to the client without getting
# any response before the connection is considered broken. In other
# words, the connection is automatically closed approximately after
# keepalive_interval * (keepalive_count + 1) seconds since the last
# message received from the client. If keepalive_interval is set to
# -1, libvirtd will never send keepalive requests; however clients
# can still send them and the deamon will send responses. When
# keepalive_count is set to 0, connections will be automatically
# closed after keepalive_interval seconds of inactivity without
# sending any keepalive messages.
#
#keepalive_interval = 5
#keepalive_count = 5
#
# If set to 1, libvirtd will refuse to talk to clients that do not
# support keepalive protocol. Defaults to 0.
#
#keepalive_required = 1

410
doc/training-guide/training-labs/Scripts/Nova/Templates/SingleNode/libvirt/qemu.conf Normal file
View File

@ -0,0 +1,410 @@
# Master configuration file for the QEMU driver.
# All settings described here are optional - if omitted, sensible
# defaults are used.
# VNC is configured to listen on 127.0.0.1 by default.
# To make it listen on all public interfaces, uncomment
# this next option.
#
# NB, strong recommendation to enable TLS + x509 certificate
# verification when allowing public access
#
#vnc_listen = "0.0.0.0"
# Enable this option to have VNC served over an automatically created
# unix socket. This prevents unprivileged access from users on the
# host machine, though most VNC clients do not support it.
#
# This will only be enabled for VNC configurations that do not have
# a hardcoded 'listen' or 'socket' value. This setting takes preference
# over vnc_listen.
#
#vnc_auto_unix_socket = 1
# Enable use of TLS encryption on the VNC server. This requires
# a VNC client which supports the VeNCrypt protocol extension.
# Examples include vinagre, virt-viewer, virt-manager and vencrypt
# itself. UltraVNC, RealVNC, TightVNC do not support this
#
# It is necessary to setup CA and issue a server certificate
# before enabling this.
#
#vnc_tls = 1
# Use of TLS requires that x509 certificates be issued. The
# default it to keep them in /etc/pki/libvirt-vnc. This directory
# must contain
#
# ca-cert.pem - the CA master certificate
# server-cert.pem - the server certificate signed with ca-cert.pem
# server-key.pem - the server private key
#
# This option allows the certificate directory to be changed
#
#vnc_tls_x509_cert_dir = "/etc/pki/libvirt-vnc"
# The default TLS configuration only uses certificates for the server
# allowing the client to verify the server's identity and establish
# an encrypted channel.
#
# It is possible to use x509 certificates for authentication too, by
# issuing a x509 certificate to every client who needs to connect.
#
# Enabling this option will reject any client who does not have a
# certificate signed by the CA in /etc/pki/libvirt-vnc/ca-cert.pem
#
#vnc_tls_x509_verify = 1
# The default VNC password. Only 8 letters are significant for
# VNC passwords. This parameter is only used if the per-domain
# XML config does not already provide a password. To allow
# access without passwords, leave this commented out. An empty
# string will still enable passwords, but be rejected by QEMU,
# effectively preventing any use of VNC. Obviously change this
# example here before you set this.
#
#vnc_password = "XYZ12345"
# Enable use of SASL encryption on the VNC server. This requires
# a VNC client which supports the SASL protocol extension.
# Examples include vinagre, virt-viewer and virt-manager
# itself. UltraVNC, RealVNC, TightVNC do not support this
#
# It is necessary to configure /etc/sasl2/qemu.conf to choose
# the desired SASL plugin (eg, GSSPI for Kerberos)
#
#vnc_sasl = 1
# The default SASL configuration file is located in /etc/sasl2/
# When running libvirtd unprivileged, it may be desirable to
# override the configs in this location. Set this parameter to
# point to the directory, and create a qemu.conf in that location
#
#vnc_sasl_dir = "/some/directory/sasl2"
# QEMU implements an extension for providing audio over a VNC connection,
# though if your VNC client does not support it, your only chance for getting
# sound output is through regular audio backends. By default, libvirt will
# disable all QEMU sound backends if using VNC, since they can cause
# permissions issues. Enabling this option will make libvirtd honor the
# QEMU_AUDIO_DRV environment variable when using VNC.
#
#vnc_allow_host_audio = 0
# SPICE is configured to listen on 127.0.0.1 by default.
# To make it listen on all public interfaces, uncomment
# this next option.
#
# NB, strong recommendation to enable TLS + x509 certificate
# verification when allowing public access
#
#spice_listen = "0.0.0.0"
# Enable use of TLS encryption on the SPICE server.
#
# It is necessary to setup CA and issue a server certificate
# before enabling this.
#
#spice_tls = 1
# Use of TLS requires that x509 certificates be issued. The
# default it to keep them in /etc/pki/libvirt-spice. This directory
# must contain
#
# ca-cert.pem - the CA master certificate
# server-cert.pem - the server certificate signed with ca-cert.pem
# server-key.pem - the server private key
#
# This option allows the certificate directory to be changed.
#
#spice_tls_x509_cert_dir = "/etc/pki/libvirt-spice"
# The default SPICE password. This parameter is only used if the
# per-domain XML config does not already provide a password. To
# allow access without passwords, leave this commented out. An
# empty string will still enable passwords, but be rejected by
# QEMU, effectively preventing any use of SPICE. Obviously change
# this example here before you set this.
#
#spice_password = "XYZ12345"
# Override the port for creating both VNC and SPICE sessions (min).
# This defaults to 5900 and increases for consecutive sessions
# or when ports are occupied, until it hits the maximum.
#
# Minimum must be greater than or equal to 5900 as lower number would
# result into negative vnc display number.
#
# Maximum must be less than 65536, because higher numbers do not make
# sense as a port number.
#
#remote_display_port_min = 5900
#remote_display_port_max = 65535
# The default security driver is SELinux. If SELinux is disabled
# on the host, then the security driver will automatically disable
# itself. If you wish to disable QEMU SELinux security driver while
# leaving SELinux enabled for the host in general, then set this
# to 'none' instead. It's also possible to use more than one security
# driver at the same time, for this use a list of names separated by
# comma and delimited by square brackets. For example:
#
# security_driver = [ "selinux", "apparmor" ]
#
# Notes: The DAC security driver is always enabled; as a result, the
# value of security_driver cannot contain "dac". The value "none" is
# a special value; security_driver can be set to that value in
# isolation, but it cannot appear in a list of drivers.
#
#security_driver = "selinux"
# If set to non-zero, then the default security labeling
# will make guests confined. If set to zero, then guests
# will be unconfined by default. Defaults to 1.
#security_default_confined = 1
# If set to non-zero, then attempts to create unconfined
# guests will be blocked. Defaults to 0.
#security_require_confined = 1
# The user for QEMU processes run by the system instance. It can be
# specified as a user name or as a user id. The qemu driver will try to
# parse this value first as a name and then, if the name doesn't exist,
# as a user id.
#
# Since a sequence of digits is a valid user name, a leading plus sign
# can be used to ensure that a user id will not be interpreted as a user
# name.
#
# Some examples of valid values are:
#
# user = "qemu" # A user named "qemu"
# user = "+0" # Super user (uid=0)
# user = "100" # A user named "100" or a user with uid=100
#
#user = "root"
# The group for QEMU processes run by the system instance. It can be
# specified in a similar way to user.
#group = "root"
# Whether libvirt should dynamically change file ownership
# to match the configured user/group above. Defaults to 1.
# Set to 0 to disable file ownership changes.
#dynamic_ownership = 1
# What cgroup controllers to make use of with QEMU guests
#
# - 'cpu' - use for schedular tunables
# - 'devices' - use for device whitelisting
# - 'memory' - use for memory tunables
# - 'blkio' - use for block devices I/O tunables
# - 'cpuset' - use for CPUs and memory nodes
# - 'cpuacct' - use for CPUs statistics.
#
# NB, even if configured here, they won't be used unless
# the administrator has mounted cgroups, e.g.:
#
# mkdir /dev/cgroup
# mount -t cgroup -o devices,cpu,memory,blkio,cpuset none /dev/cgroup
#
# They can be mounted anywhere, and different controllers
# can be mounted in different locations. libvirt will detect
# where they are located.
#
#cgroup_controllers = [ "cpu", "devices", "memory", "blkio", "cpuset", "cpuacct" ]
# This is the basic set of devices allowed / required by
# all virtual machines.
#
# As well as this, any configured block backed disks,
# all sound device, and all PTY devices are allowed.
#
# This will only need setting if newer QEMU suddenly
# wants some device we don't already know about.
#
#cgroup_device_acl = [
# "/dev/null", "/dev/full", "/dev/zero",
# "/dev/random", "/dev/urandom",
# "/dev/ptmx", "/dev/kvm", "/dev/kqemu",
# "/dev/rtc","/dev/hpet"
#]
# The default format for Qemu/KVM guest save images is raw; that is, the
# memory from the domain is dumped out directly to a file. If you have
# guests with a large amount of memory, however, this can take up quite
# a bit of space. If you would like to compress the images while they
# are being saved to disk, you can also set "lzop", "gzip", "bzip2", or "xz"
# for save_image_format. Note that this means you slow down the process of
# saving a domain in order to save disk space; the list above is in descending
# order by performance and ascending order by compression ratio.
#
# save_image_format is used when you use 'virsh save' at scheduled
# saving, and it is an error if the specified save_image_format is
# not valid, or the requested compression program can't be found.
#
# dump_image_format is used when you use 'virsh dump' at emergency
# crashdump, and if the specified dump_image_format is not valid, or
# the requested compression program can't be found, this falls
# back to "raw" compression.
#
#save_image_format = "raw"
#dump_image_format = "raw"
# When a domain is configured to be auto-dumped when libvirtd receives a
# watchdog event from qemu guest, libvirtd will save dump files in directory
# specified by auto_dump_path. Default value is /var/lib/libvirt/qemu/dump
#
#auto_dump_path = "/var/lib/libvirt/qemu/dump"
# When a domain is configured to be auto-dumped, enabling this flag
# has the same effect as using the VIR_DUMP_BYPASS_CACHE flag with the
# virDomainCoreDump API. That is, the system will avoid using the
# file system cache while writing the dump file, but may cause
# slower operation.
#
#auto_dump_bypass_cache = 0
# When a domain is configured to be auto-started, enabling this flag
# has the same effect as using the VIR_DOMAIN_START_BYPASS_CACHE flag
# with the virDomainCreateWithFlags API. That is, the system will
# avoid using the file system cache when restoring any managed state
# file, but may cause slower operation.
#
#auto_start_bypass_cache = 0
# If provided by the host and a hugetlbfs mount point is configured,
# a guest may request huge page backing. When this mount point is
# unspecified here, determination of a host mount point in /proc/mounts
# will be attempted. Specifying an explicit mount overrides detection
# of the same in /proc/mounts. Setting the mount point to "" will
# disable guest hugepage backing.
#
# NB, within this mount point, guests will create memory backing files
# in a location of $MOUNTPOINT/libvirt/qemu
#
#hugetlbfs_mount = "/dev/hugepages"
# If clear_emulator_capabilities is enabled, libvirt will drop all
# privileged capabilities of the QEmu/KVM emulator. This is enabled by
# default.
#
# Warning: Disabling this option means that a compromised guest can
# exploit the privileges and possibly do damage to the host.
#
#clear_emulator_capabilities = 1
# If enabled, libvirt will have QEMU set its process name to
# "qemu:VM_NAME", where VM_NAME is the name of the VM. The QEMU
# process will appear as "qemu:VM_NAME" in process listings and
# other system monitoring tools. By default, QEMU does not set
# its process title, so the complete QEMU command (emulator and
# its arguments) appear in process listings.
#
#set_process_name = 1
# If max_processes is set to a positive integer, libvirt will use
# it to set the maximum number of processes that can be run by qemu
# user. This can be used to override default value set by host OS.
# The same applies to max_files which sets the limit on the maximum
# number of opened files.
#
#max_processes = 0
#max_files = 0
# mac_filter enables MAC addressed based filtering on bridge ports.
# This currently requires ebtables to be installed.
#
#mac_filter = 1
# By default, PCI devices below non-ACS switch are not allowed to be assigned
# to guests. By setting relaxed_acs_check to 1 such devices will be allowed to
# be assigned to guests.
#
#relaxed_acs_check = 1
# If allow_disk_format_probing is enabled, libvirt will probe disk
# images to attempt to identify their format, when not otherwise
# specified in the XML. This is disabled by default.
#
# WARNING: Enabling probing is a security hole in almost all
# deployments. It is strongly recommended that users update their
# guest XML <disk> elements to include <driver type='XXXX'/>
# elements instead of enabling this option.
#
#allow_disk_format_probing = 1
# To enable 'Sanlock' project based locking of the file
# content (to prevent two VMs writing to the same
# disk), uncomment this
#
#lock_manager = "sanlock"
# Set limit of maximum APIs queued on one domain. All other APIs
# over this threshold will fail on acquiring job lock. Specially,
# setting to zero turns this feature off.
# Note, that job lock is per domain.
#
#max_queued = 0
###################################################################
# Keepalive protocol:
# This allows qemu driver to detect broken connections to remote
# libvirtd during peer-to-peer migration. A keepalive message is
# sent to the deamon after keepalive_interval seconds of inactivity
# to check if the deamon is still responding; keepalive_count is a
# maximum number of keepalive messages that are allowed to be sent
# to the deamon without getting any response before the connection
# is considered broken. In other words, the connection is
# automatically closed approximately after
# keepalive_interval * (keepalive_count + 1) seconds since the last
# message received from the deamon. If keepalive_interval is set to
# -1, qemu driver will not send keepalive requests during
# peer-to-peer migration; however, the remote libvirtd can still
# send them and source libvirtd will send responses. When
# keepalive_count is set to 0, connections will be automatically
# closed after keepalive_interval seconds of inactivity without
# sending any keepalive messages.
#
#keepalive_interval = 5
#keepalive_count = 5
# Use seccomp syscall whitelisting in QEMU.
# 1 = on, 0 = off, -1 = use QEMU default
# Defaults to -1.
#
#seccomp_sandbox = 1
cgroup_device_acl = [
"/dev/null", "/dev/full", "/dev/zero",
"/dev/random", "/dev/urandom",
"/dev/ptmx", "/dev/kvm", "/dev/kqemu",
"/dev/rtc", "/dev/hpet","/dev/net/tun"
]

109
doc/training-guide/training-labs/Scripts/Nova/Templates/SingleNode/nova/api-paste.ini Normal file
View File

@ -0,0 +1,109 @@
############
# Metadata #
############
[composite:metadata]
use = egg:Paste#urlmap
/: meta
[pipeline:meta]
pipeline = ec2faultwrap logrequest metaapp
[app:metaapp]
paste.app_factory = nova.api.metadata.handler:MetadataRequestHandler.factory
#######
# EC2 #
#######
[composite:ec2]
use = egg:Paste#urlmap
/services/Cloud: ec2cloud
[composite:ec2cloud]
use = call:nova.api.auth:pipeline_factory
noauth = ec2faultwrap logrequest ec2noauth cloudrequest validator ec2executor
keystone = ec2faultwrap logrequest ec2keystoneauth cloudrequest validator ec2executor
[filter:ec2faultwrap]
paste.filter_factory = nova.api.ec2:FaultWrapper.factory
[filter:logrequest]
paste.filter_factory = nova.api.ec2:RequestLogging.factory
[filter:ec2lockout]
paste.filter_factory = nova.api.ec2:Lockout.factory
[filter:ec2keystoneauth]
paste.filter_factory = nova.api.ec2:EC2KeystoneAuth.factory
[filter:ec2noauth]
paste.filter_factory = nova.api.ec2:NoAuth.factory
[filter:cloudrequest]
controller = nova.api.ec2.cloud.CloudController
paste.filter_factory = nova.api.ec2:Requestify.factory
[filter:authorizer]
paste.filter_factory = nova.api.ec2:Authorizer.factory
[filter:validator]
paste.filter_factory = nova.api.ec2:Validator.factory
[app:ec2executor]
paste.app_factory = nova.api.ec2:Executor.factory
#############
# Openstack #
#############
[composite:osapi_compute]
use = call:nova.api.openstack.urlmap:urlmap_factory
/: oscomputeversions
/v1.1: openstack_compute_api_v2
/v2: openstack_compute_api_v2
[composite:openstack_compute_api_v2]
use = call:nova.api.auth:pipeline_factory
noauth = faultwrap sizelimit noauth ratelimit osapi_compute_app_v2
keystone = faultwrap sizelimit authtoken keystonecontext ratelimit osapi_compute_app_v2
keystone_nolimit = faultwrap sizelimit authtoken keystonecontext osapi_compute_app_v2
[filter:faultwrap]
paste.filter_factory = nova.api.openstack:FaultWrapper.factory
[filter:noauth]
paste.filter_factory = nova.api.openstack.auth:NoAuthMiddleware.factory
[filter:ratelimit]
paste.filter_factory = nova.api.openstack.compute.limits:RateLimitingMiddleware.factory
[filter:sizelimit]
paste.filter_factory = nova.api.sizelimit:RequestBodySizeLimiter.factory
[app:osapi_compute_app_v2]
paste.app_factory = nova.api.openstack.compute:APIRouter.factory
[pipeline:oscomputeversions]
pipeline = faultwrap oscomputeversionapp
[app:oscomputeversionapp]
paste.app_factory = nova.api.openstack.compute.versions:Versions.factory
##########
# Shared #
##########
[filter:keystonecontext]
paste.filter_factory = nova.api.auth:NovaKeystoneContext.factory
[filter:authtoken]
paste.filter_factory = keystoneclient.middleware.auth_token:filter_factory
auth_host = 10.10.10.51
auth_port = 35357
auth_protocol = http
admin_tenant_name = service
admin_user = nova
admin_password = service_pass
signing_dirname = /tmp/keystone-signing-nova
# Workaround for https://bugs.launchpad.net/nova/+bug/1154809
auth_version = v2.0

3
doc/training-guide/training-labs/Scripts/Nova/Templates/SingleNode/nova/nova-compute.conf Normal file
View File

@ -0,0 +1,3 @@
[DEFAULT]
libvirt_type=qemu
compute_driver=libvirt.LibvirtDriver

67
doc/training-guide/training-labs/Scripts/Nova/Templates/SingleNode/nova/nova.conf Normal file
View File

@ -0,0 +1,67 @@
[DEFAULT]
dhcpbridge_flagfile=/etc/nova/nova.conf
dhcpbridge=/usr/bin/nova-dhcpbridge
logdir=/var/log/nova
state_path=/var/lib/nova
lock_path=/run/lock/nova
force_dhcp_release=True
iscsi_helper=tgtadm
libvirt_use_virtio_for_bridges=True
connection_type=libvirt
root_helper=sudo nova-rootwrap /etc/nova/rootwrap.conf
verbose=True
ec2_private_dns_show_ip=True
api_paste_config=/etc/nova/api-paste.ini
volumes_path=/var/lib/nova/volumes
enabled_apis=ec2,osapi_compute,metadata
compute_scheduler_driver=nova.scheduler.simple.SimpleScheduler
rabbit_host=10.10.10.51
nova_url=http://10.10.10.51:8774/v1.1/
sql_connection=mysql://novaUser:novaPass@10.10.10.51/nova
root_helper=sudo nova-rootwrap /etc/nova/rootwrap.conf
# Auth
use_deprecated_auth=false
auth_strategy=keystone
# Imaging service
glance_api_servers=10.10.10.51:9292
image_service=nova.image.glance.GlanceImageService
# Vnc configuration
novnc_enabled=true
novncproxy_base_url=http://10.10.10.51:6080/vnc_auto.html
novncproxy_port=6080
vncserver_proxyclient_address=10.10.10.51
vncserver_listen=0.0.0.0
# Network settings
network_api_class=nova.network.quantumv2.api.API
quantum_url=http://10.10.10.51:9696
quantum_auth_strategy=keystone
quantum_admin_tenant_name=service
quantum_admin_username=quantum
quantum_admin_password=service_pass
quantum_admin_auth_url=http://10.10.10.51:35357/v2.0
libvirt_vif_driver=nova.virt.libvirt.vif.LibvirtHybridOVSBridgeDriver
linuxnet_interface_driver=nova.network.linux_net.LinuxOVSInterfaceDriver
#If you want Quantum + Nova Security groups
firewall_driver=nova.virt.firewall.NoopFirewallDriver
security_group_api=quantum
#If you want Nova Security groups only, comment the two lines above and uncomment line -1-.
#-1-firewall_driver=nova.virt.libvirt.firewall.IptablesFirewallDriver
#Metadata
service_quantum_metadata_proxy = True
quantum_metadata_proxy_shared_secret = helloOpenStack
metadata_host = 10.10.10.51
metadata_listen = 127.0.0.1
metadata_listen_port = 8775
# Compute #
compute_driver=libvirt.LibvirtDriver
# Cinder #
volume_api_class=nova.volume.cinder.API
osapi_volume_listen_port=5900

52
doc/training-guide/training-labs/Scripts/PostInstall/PostInstall.sh Normal file
View File

@ -0,0 +1,52 @@
#!/bin/sh
#
# About:Setup Dependences for Virtual Box Sandbox
# meant for OpenStack Labs.
#
# Contact: pranav@aptira.com
# Copyright : Aptira @aptira,aptira.com
# License: Apache Software License (ASL) 2.0
#################################################################################
# #
# This Script will carry out few tasks after installing OpenStack. #
# #
#################################################################################
# Create Tenant
keystone tenant-create --name Os_Training
echo "Enter Tenant ID"
read $Tenant_ID
#Create User and assign required role
keystone user-create --name=trainee --pass=cloud --tenant-id $Tenant_ID --email=user_one@domain.com
echo "Enter User ID"
read $User_ID
keystone user-role-add --tenant-id $Tenant_ID --user-id $User_ID --role-id $role_id
# Create Networks
quantum net-create --tenant-id $Tenant_ID training_network
# Add Subnet
quantum subnet-create --tenant-id $Tenant_ID training_network 25.25.25.0/24
echo "Enter Subnet ID"
read $Subnet_ID
# Create Router
quantum router-create --tenant-id $Tenant_ID training_router
echo "Enter Router ID"
read $training_router
# Add Router to L3 Agent
quantum agent-list (to get the l3 agent ID)
echo "Enter L3 agent ID"
read $l3_agent_ID
quantum l3-agent-router-add $l3_agent_ID training_router
# Add Router To Subnet
quantum router-interface-add $training_router $Subnet_ID
echo "For Logging into your Cloud Via. Dashboard, use the following Credentials :"
echo "User Name: trainee"
echo "Password: cloud"

119
doc/training-guide/training-labs/Scripts/PreInstall/PreInstall.sh Normal file
View File

@ -0,0 +1,119 @@
#!/bin/sh
#
# About:Setup Dependences for Virtual Box Sandbox
# meant for OpenStack Labs.
#
# Contact: pranav@aptira.com
# Copyright : Aptira @aptira,aptira.com
# License: Apache Software License (ASL) 2.0
###################################################
# This Script will download the required packages #
# using apt-get --download-only option. #
# #
# This script will install and get your VM ready #
# for OpenStack. #
###################################################
# Assumptions : It is assumed that internet is
# switched on/VM has internet connection.
# Internet is required for this script to run.
# Add a Few required packages
apt-get install -y ubuntu-cloud-keyring python-software-properties software-properties-common python-keyring
# Update apt-get
apt-get -y update
# Add OpenStack Grizzly Repo.
echo deb http://ubuntu-cloud.archive.canonical.com/ubuntu precise-updates/grizzly main >> /etc/apt/sources.list.d/grizzly.list
# Update apt-get, Upgrade Installed Packages and Kernel Upgrade
apt-get -y --download-only update
apt-get -y --download-only upgrade
apt-get -y --download-only dist-upgrade
apt-get install -y --download-only ubuntu-cloud-keyring python-software-properties software-properties-common python-keyring
# Configure the Network Interfaces by using the templates in the networking
# part of this folder.
# TO BE ADDED LATER ON.
#service networking restart
configure_networks(){
## Check if its single node or multi node
if [ "$1" == "single-node" ]; then
# Copy Single Node interfaces file to /etc/network/
echo "Configuring Network for Single Node"
cp --no-preserve=mode,ownsership Templates/interfaces-single /etc/network/interfaces
else
if [ "$1" == "multi-node" ]; then
## If it is multi node, check which type of node it is.
case "$2" in
"control")
## Configure network for control node
echo "Configuring Network for Control Node"
cp --no-preserve=mode,ownership Templates/interfaces-control /etc/network/interfaces
;;
"compute")
## Configure network for compute node.
echo "Configuring Network for Compute Node"
cp --no-preserve=mode,ownership Templates/interfaces-compute /etc/network/interfaces
;;
"network")
## Configure network for network node.
echo "Configuring Network for Network Node"
cp --no-preserve=mode,ownership Templates/interfaces-network /etc/network/interfaces
;;
*)
echo "Invalid Input, cannot figure out which node this is. Error!!!"
esac
fi
fi
service networking restart
}
# Get (apt-get) all the packages and download them but not install them using
# the --download-only option.
# Advantage/Use/Need of --download-only in this particular case is due to the
# weird use-case of teaching OpenStack by deploying OpenStack in a local/remote
# location (College,Uni,Office,Conferences etc.) and the practise of keeping
# all the packages downloaded but-not-installed eliminates the need for
# internet while deploying openstack.
single_node() {
#Install All package on the given Virtual Machine ...
apt-get install -y --download-only mysql-server python-mysqldb rabbitmq-server ntp vlan bridge-utils \
keystone glance openvswitch-switch openvswitch-datapath-dkms quantum-server quantum-plugin-openvswitch \
quantum-plugin-openvswitch-agent dnsmasq quantum-dhcp-agent quantum-l3-agent cpu-checker kvm libvirt-bin \
pm-utils nova-api nova-cert novnc nova-consoleauth nova-scheduler nova-novncproxy nova-doc nova-conductor \
nova-compute-kvm cinder-api cinder-scheduler cinder-volume iscsitarget open-iscsi iscsitarget-dkms openstack-dashboard memcached
configure_networks $1 $2
}
multi_node(){
# $2 will be the node defination -- like control node, compute node,
# network node.
configure_networks $1 $2
# Install packages as per the node defination ...
# TO BE DONE.
## Also need to figure out whether to download all the packages even
## if they are not playing any role in the given node to keep the scripts simpler
}
if [ "$1" == "single-node" ]; then
single_node $1 $2
else
if [ "$1" == "multi-node" ]; then
multi_node $1 $2
else
echo "invalid option ... cannot proceede"
fi
fi
echo -e "Your VM is ready for OpenStack Installation ... \n you dont need internet from now on"

26
doc/training-guide/training-labs/Scripts/PreInstall/Templates/interfaces-compute Normal file
View File

@ -0,0 +1,26 @@
# interfaces(5) file used by ifup(8) and ifdown(8)
# local loopback
auto lo
iface lo inet loopback
# Virtual Box NAT -- for internet access to VM
auto eth2
iface eth2 inet dhcp
# OpenStack Multi Node
# Compute Node
#Management Network
auto eth0
iface eth0 inet static
address 10.10.10.53
netmask 255.255.255.0
gateway 10.10.10.1
#Expose OpenStack API over internet/external network
auto eth1
iface eth1 inet static
address 10.20.20.53
netmask 255.255.255.0
gateway 10.20.20.1

26
doc/training-guide/training-labs/Scripts/PreInstall/Templates/interfaces-control Normal file
View File

@ -0,0 +1,26 @@
# interfaces(5) file used by ifup(8) and ifdown(8)
# local loopback
auto lo
iface lo inet loopback
# Virtual Box NAT -- for internet access to VM
auto eth2
iface eth2 inet dhcp
# OpenStack Multi Node
# Control Node
# OpenStack Management Network
auto eth0
iface eth0 inet static
address 10.10.10.51
netmask 255.255.255.0
gateway 10.10.10.1
# Expose OpenStack API to External Network/Internet
auto eth1
iface eth1 inet static
address 192.168.100.51
netmask 255.255.255.0
gateway 192.168.100.1

31
doc/training-guide/training-labs/Scripts/PreInstall/Templates/interfaces-network Normal file
View File

@ -0,0 +1,31 @@
# interfaces(5) file used by ifup(8) and ifdown(8)
# local loopback
auto lo
iface lo inet loopback
# Virtual Box NAT -- for internet access to VM
auto eth3
iface eth3 inet dhcp
# OpenStack Multi Node
# Network Node
# OpenStack Management Network
auto eth0
iface eth0 inet static
address 10.10.10.52
netmask 255.255.255.0
gateway 10.10.10.1
# VM Internal Communication Network
auto eth1
iface eth1 inet static
address 10.20.20.52
netmask 255.255.255.0
# VM internet/external network Access
auto eth2
iface eth2 inet static
address 192.168.100.52
netmask 255.255.255.0

25
doc/training-guide/training-labs/Scripts/PreInstall/Templates/interfaces-single Normal file
View File

@ -0,0 +1,25 @@
# interfaces(5) file used by ifup(8) and ifdown(8)
# local loopback
auto lo
iface lo inet loopback
# Virtual Box NAT -- for internet access to VM
auto eth2
iface eth2 inet static
# OpenStack Single Node.
# OpenStack Management Network
auto eth0
iface eth0 inet static
address 10.10.10.51
netmask 255.255.255.0
gateway 10.10.10.1
# Expose OpenStack API to External Network/Internet
auto eth1
iface eth1 inet static
address 192.168.100.51
netmask 255.255.255.0
gateway 192.168.100.1

60
doc/training-guide/training-labs/Scripts/test_scripts.sh Executable file
View File

@ -0,0 +1,60 @@
#!/bin/bash
#
# This script is for testing Scripts inside this folder.
#
# Contact: pranav@aptira.com
# Copyright : Aptira @aptira,aptira.com
# License: Apache Software License (ASL) 2.0
###############################################################################
# #
# Testing the Scripts #
# #
###############################################################################
# Ignore the above content its for decorations
source Keystone/Scripts/Credentials.sh
echo -e "
Run this script from inside your Virtual Machine or test machine
this script is meant for testing the Scripts related to OpenStack and
not related to Virtual Box.
The sole aim of this script is to test all of the given OpenStack Scripts
present in the sub folder which deploys OpenStack as it is very important
that thee scripts install and configure OpenStack properly with a touch
of reliability otherwise one mite as well use DevStack ;).
"
echo -e "Warning!!! This may break your Operating System."
echo -e "Do you want to continue(y/N)?"
read cont
if [ "$cont" == "Y" -o "$cont" == "y" ]; then
# Missing Exception Handlers :((, would have been very handy here
echo "You Pressed Yes."
echo -e "Testing PreInstall"
bash PreInstall/PreInstall.sh "single-node" > Logs/PreInstall.log
echo -e "Testing Keystone"
bash Keystone/Keystone.sh > Logs/Keystone.log
echo -e "Testing Glance"
bash Glance/Glance.sh > Logs/Glance.log
echo -e "Testing Cinder"
bash Cinder/Cinder.sh > Logs/Cinder.log
echo -e "Testing Neutron"
bash Neutron/Neutron.sh > Logs/Neutron.log
echo -e "Testing Nova"
bash Nova/Nova.sh > Logs/Nova.log
echo -e "Testing Horizon"
bash Horizon/Horizon.sh > Logs/Horizon.log
echo -e "Testing PostInstall"
bash PostInstall/PostInstall.sh > Logs/PostInstall.log
fi
echo -e "Mostly the tests run fine ... although Im not sure !!! Please Read the Terminal Messages Carefully."

83
doc/training-guide/training-labs/install.sh Executable file
View File

@ -0,0 +1,83 @@
#!/bin/bash
#
# About:Setup Dependences for Virtual Box Sandbox
# meant for OpenStack Labs.
#
# Contact: pranav@aptira.com
# Copyright : Aptira @aptira,aptira.com
# License: Apache Software License (ASL) 2.0
###############################################################################
# #
# This Script will ask the user for type of OpenStack install... #
# and it will configure the VM #
# #
###############################################################################
# Check for kvm-ok >> Virtual Box >>
# Colors and Decorations (Ignore)
RCol='\e[0m' # Text Reset
#Regular #Bold #Underline #High Intensity #BoldHigh Intens #Background #High Intensity Backgrounds
Bla='\e[0;30m'; BBla='\e[1;30m'; UBla='\e[4;30m'; IBla='\e[0;90m'; BIBla='\e[1;90m'; On_Bla='\e[40m'; On_IBla='\e[0;100m';
Red='\e[0;31m'; BRed='\e[1;31m'; URed='\e[4;31m'; IRed='\e[0;91m'; BIRed='\e[1;91m'; On_Red='\e[41m'; On_IRed='\e[0;101m';
Gre='\e[0;32m'; BGre='\e[1;32m'; UGre='\e[4;32m'; IGre='\e[0;92m'; BIGre='\e[1;92m'; On_Gre='\e[42m'; On_IGre='\e[0;102m';
Yel='\e[0;33m'; BYel='\e[1;33m'; UYel='\e[4;33m'; IYel='\e[0;93m'; BIYel='\e[1;93m'; On_Yel='\e[43m'; On_IYel='\e[0;103m';
Blu='\e[0;34m'; BBlu='\e[1;34m'; UBlu='\e[4;34m'; IBlu='\e[0;94m'; BIBlu='\e[1;94m'; On_Blu='\e[44m'; On_IBlu='\e[0;104m';
Pur='\e[0;35m'; BPur='\e[1;35m'; UPur='\e[4;35m'; IPur='\e[0;95m'; BIPur='\e[1;95m'; On_Pur='\e[45m'; On_IPur='\e[0;105m';
Cya='\e[0;36m'; BCya='\e[1;36m'; UCya='\e[4;36m'; ICya='\e[0;96m'; BICya='\e[1;96m'; On_Cya='\e[46m'; On_ICya='\e[0;106m';
Whi='\e[0;37m'; BWhi='\e[1;37m'; UWhi='\e[4;37m'; IWhi='\e[0;97m'; BIWhi='\e[1;97m'; On_Whi='\e[47m'; On_IWhi='\e[0;107m';
echo -e "${On_Bla}"
echo -e "
${IWhi}##################################################
${BIRed}Note: ${BIblu}You need internet for this script to run
${IWhi}##################################################"
echo -e "${IYel}"
echo -e "${RCol}"
end(){
echo -e "${BBlu}Program Terminating"
echo -e "${RCol}"
exit
}
check (){
if [ $? -eq 0 ]; then
echo -e "${BBlu}... $1 Success ..."
else
if [$2 -eq 1 ]; then
echo -e "${BIRed}Failed Terminating"
end
else
echo -e "${BIRed}$2 Failed !!! Please Recheck"
end
fi
fi
}
echo "Press [y/N] for single node"
read single_node_install
if [ "$single_node_install" == "Y" -o "$single_node_install" == "y" ]; then
echo "Configuring VirtualBox VM's for Single Node Deployment"
./singlenode.sh
else
echo "Press [y/N] for multi node"
read multi_node_install
if [ "$multi_node_install" == "Y" -o "$multi_node_install" == "y" ]; then
echo "Configuring VirtualBox VM's for Multi Node Deployment"
./multinode.sh
fi
fi
end

29
doc/training-guide/training-labs/multinode.sh Executable file
View File

@ -0,0 +1,29 @@
#!/bin/sh
#
# About:Setup Dependences for Virtual Box Sandbox
# meant for OpenStack Labs.
#
# Contact: pranav@aptira.com
# Copyright : Aptira @aptira,aptira.com
# License: Apache Software License (ASL) 2.0
###############################################################################
# #
# Carry out tasks for settingup Multi Node Environment for OpenStack #
# #
# #
###############################################################################
echo "Multi Node"
echo "This script is to be implemented later on, Please Refer to Single Node for now."
uname=root
pass=cloud
vm_id="d57da699-ff1e-4b24-b270-78093a2b25a9"
# Download The VM From Repo/Storage Space on Internet.
# Regester the VM & Start the VM.
# Execute the Single Node Script to configure the network.
#vboxmanage guestcontrol $vm_id execute --image "/bin/ls" --username $uname --password $pass --wait-exit --wait-stdout
# Execute the single node install scripts and take snapshots after each scriptboxmanage guestcontrol $vm_id execute --image "/bin/ls" --username $uname --password $pass --wait-exit --wait-stdout
# vboxmanage snapshot $vm_id take "test_snapshot" --description "test snapshot -- igore :D"

60
doc/training-guide/training-labs/singlenode.sh Executable file
View File

@ -0,0 +1,60 @@
#!/bin/sh
#
# About:Setup Dependences for Virtual Box Sandbox
# meant for OpenStack Labs.
#
# Contact: pranav@aptira.com
# Copyright : Aptira @aptira,aptira.com
# License: Apache Software License (ASL) 2.0
###############################################################################
# #
# Carry out tasks for settingup Single Node Environment for OpenStack #
# #
# #
###############################################################################
echo "Single Node"
uname=
pass=
vm_id=
# Download The VM From Repo/Storage Space on Internet.
# Regester the VM & Start the VM.
# Execute the Single Node Script to configure the network and getting Ubuntu
# Ready for openstack.
vboxmanage guestcontrol $vm_id execute --image "/bin/ls" --username $uname --password $pass --wait-exit --wait-stdout
# Snapshot 1. Basic Settings
# Execute the single node install scripts and take snapshots after each script
# 1. Download all the packages using apt-get --download-only but not installing
# them.
# 2. Snapshot 2. Offline Ready
# 3. Keystone
# 4. Snapshot 3. Keystone Ready
# 5. Glance
# 6. Snapshot 4. Glance Ready
# 7. Quantum
# 8. Snapshot 5. Quantum Ready
# 9. Nova
# 10. Snapshot 6. Nova Ready
# 11. Cinder
# 12. Snapshot 7. Cinder Ready
# 13. Horizon
# 14. Snapshot 8. Horizon Ready
# 15. Configure and Kickstart VM in OpenStack
# 16. Snapshot 9. OpenStack Configured