openstack/openstack-manuals
Code Issues Proposed changes

Merge "Correct note about 3PAR iSCSI address config"

Browse Source
This commit is contained in:
Jenkins 2016-07-12 02:23:17 +00:00 committed by Gerrit Code Review
commit 41cfb639ad
1 changed files with 5 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
doc/config-reference/source/block-storage/drivers/hpe-3par-driver.rst
View File

@ -363,13 +363,11 @@ OpenStack software.
.. note::
You can configure one or more iSCSI addresses by using the
``hpe3par_iscsi_ips`` option. When you configure multiple addresses, the
driver selects the iSCSI port with the fewest active volumes at attach
time. The IP address might include an IP port by using a colon (``:``)
to separate the address from port. If you do not define an IP port, the
default port 3260 is used. Separate IP addresses with a comma (``,``).
The ``iscsi_ip_address``/``iscsi_port`` options might be used as an
alternative to ``hpe3par_iscsi_ips`` for single port iSCSI configuration.
``hpe3par_iscsi_ips`` option. Separate multiple IP addresses with a
comma (``,``). When you configure multiple addresses, the driver selects
the iSCSI port with the fewest active volumes at attach time. The 3PAR
array does not allow the default port 3260 to be changed, so IP ports
need not be specified.
#. Save the changes to the ``cinder.conf`` file and restart the cinder-volume
service.