Add pep8 environment to the tox.ini file

Because we have several Python files inside this repository we should
be able to check them.

Change-Id: Iaf4a013cf0c109d60b5421c5077505fdcbb4a30c

doc/hot-guide/source/conf.py

@@ -1,3 +1,16 @@
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#    http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
+# implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
 # HOT Templates Guide documentation build configuration file, created by
 # sphinx-quickstart on Fri Jul 18 15:27:11 2014.
 #
@@ -10,18 +23,18 @@
 # All configuration values have a default; values that are commented out
 # serve to show the default.
 
-import sys
+# import os
-import os
+# import sys
 
 # If extensions (or modules to document with autodoc) are in another directory,
 # add these directories to sys.path here. If the directory is relative to the
 # documentation root, use os.path.abspath to make it absolute, like shown here.
-#sys.path.insert(0, os.path.abspath('.'))
+# sys.path.insert(0, os.path.abspath('.'))
 
 # -- General configuration ------------------------------------------------
 
 # If your documentation needs a minimal Sphinx version, state it here.
-#needs_sphinx = '1.0'
+# needs_sphinx = '1.0'
 
 # Add any Sphinx extension module names here, as strings. They can be
 # extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
@@ -35,7 +48,7 @@ templates_path = ['_templates']
 source_suffix = '.rst'
 
 # The encoding of source files.
-#source_encoding = 'utf-8-sig'
+# source_encoding = 'utf-8-sig'
 
 # The master toctree document.
 master_doc = 'index'
@@ -55,13 +68,13 @@ release = '0.1'
 
 # The language for content autogenerated by Sphinx. Refer to documentation
 # for a list of supported languages.
-#language = None
+# language = None
 
 # There are two options for replacing |today|: either, you set today to some
 # non-false value, then it is used:
-#today = ''
+# today = ''
 # Else, today_fmt is used as the format for a strftime call.
-#today_fmt = '%B %d, %Y'
+# today_fmt = '%B %d, %Y'
 
 # List of patterns, relative to source directory, that match files and
 # directories to ignore when looking for source files.
@@ -69,27 +82,27 @@ exclude_patterns = []
 
 # The reST default role (used for this markup: `text`) to use for all
 # documents.
-#default_role = None
+# default_role = None
 
 # If true, '()' will be appended to :func: etc. cross-reference text.
-#add_function_parentheses = True
+# add_function_parentheses = True
 
 # If true, the current module name will be prepended to all description
 # unit titles (such as .. function::).
-#add_module_names = True
+# add_module_names = True
 
 # If true, sectionauthor and moduleauthor directives will be shown in the
 # output. They are ignored by default.
-#show_authors = False
+# show_authors = False
 
 # The name of the Pygments (syntax highlighting) style to use.
 pygments_style = 'sphinx'
 
 # A list of ignored prefixes for module index sorting.
-#modindex_common_prefix = []
+# modindex_common_prefix = []
 
 # If true, keep warnings as "system message" paragraphs in the built documents.
-#keep_warnings = False
+# keep_warnings = False
 
 
 # -- Options for HTML output ----------------------------------------------
@@ -101,26 +114,26 @@ pygments_style = 'sphinx'
 # Theme options are theme-specific and customize the look and feel of a theme
 # further.  For a list of options available for each theme, see the
 # documentation.
-#html_theme_options = {}
+# html_theme_options = {}
 
 # Add any paths that contain custom themes here, relative to this directory.
-#html_theme_path = []
+# html_theme_path = []
 
 # The name for this set of Sphinx documents.  If None, it defaults to
 # "<project> v<release> documentation".
-#html_title = None
+# html_title = None
 
 # A shorter title for the navigation bar.  Default is the same as html_title.
-#html_short_title = None
+# html_short_title = None
 
 # The name of an image file (relative to this directory) to place at the top
 # of the sidebar.
-#html_logo = None
+# html_logo = None
 
 # The name of an image file (within the static path) to use as favicon of the
 # docs.  This file should be a Windows icon file (.ico) being 16x16 or 32x32
 # pixels large.
-#html_favicon = None
+# html_favicon = None
 
 # Add any paths that contain custom static files (such as style sheets) here,
 # relative to this directory. They are copied after the builtin static files,
@@ -130,48 +143,48 @@ html_static_path = ['_static']
 # Add any extra paths that contain custom files (such as robots.txt or
 # .htaccess) here, relative to this directory. These files are copied
 # directly to the root of the documentation.
-#html_extra_path = []
+# html_extra_path = []
 
 # If not '', a 'Last updated on:' timestamp is inserted at every page bottom,
 # using the given strftime format.
-#html_last_updated_fmt = '%b %d, %Y'
+# html_last_updated_fmt = '%b %d, %Y'
 
 # If true, SmartyPants will be used to convert quotes and dashes to
 # typographically correct entities.
-#html_use_smartypants = True
+# html_use_smartypants = True
 
 # Custom sidebar templates, maps document names to template names.
-#html_sidebars = {}
+# html_sidebars = {}
 
 # Additional templates that should be rendered to pages, maps page names to
 # template names.
-#html_additional_pages = {}
+# html_additional_pages = {}
 
 # If false, no module index is generated.
-#html_domain_indices = True
+# html_domain_indices = True
 
 # If false, no index is generated.
-#html_use_index = True
+# html_use_index = True
 
 # If true, the index is split into individual pages for each letter.
-#html_split_index = False
+# html_split_index = False
 
 # If true, links to the reST sources are added to the pages.
-#html_show_sourcelink = True
+# html_show_sourcelink = True
 
 # If true, "Created using Sphinx" is shown in the HTML footer. Default is True.
-#html_show_sphinx = True
+# html_show_sphinx = True
 
 # If true, "(C) Copyright ..." is shown in the HTML footer. Default is True.
-#html_show_copyright = True
+# html_show_copyright = True
 
 # If true, an OpenSearch description file will be output, and all pages will
 # contain a <link> tag referring to it.  The value of this option must be the
 # base URL from which the finished HTML is served.
-#html_use_opensearch = ''
+# html_use_opensearch = ''
 
 # This is the file name suffix for HTML files (e.g. ".xhtml").
-#html_file_suffix = None
+# html_file_suffix = None
 
 # Output file base name for HTML help builder.
 htmlhelp_basename = 'HOTguidedoc'
@@ -180,43 +193,43 @@ htmlhelp_basename = 'HOTguidedoc'
 # -- Options for LaTeX output ---------------------------------------------
 
 latex_elements = {
-# The paper size ('letterpaper' or 'a4paper').
+    # The paper size ('letterpaper' or 'a4paper').
-#'papersize': 'letterpaper',
+    # 'papersize': 'letterpaper',
 
-# The font size ('10pt', '11pt' or '12pt').
+    # The font size ('10pt', '11pt' or '12pt').
-#'pointsize': '10pt',
+    # 'pointsize': '10pt',
 
-# Additional stuff for the LaTeX preamble.
+    # Additional stuff for the LaTeX preamble.
-#'preamble': '',
+    # 'preamble': '',
 }
 
 # Grouping the document tree into LaTeX files. List of tuples
 # (source start file, target name, title,
 #  author, documentclass [howto, manual, or own class]).
 latex_documents = [
-  ('index', 'HOTguide.tex', u'HOT guide',
+    ('index', 'HOTguide.tex', u'HOT guide',
-   u'OpenStack Doc Team', 'manual'),
+     u'OpenStack Doc Team', 'manual'),
 ]
 
 # The name of an image file (relative to this directory) to place at the top of
 # the title page.
-#latex_logo = None
+# latex_logo = None
 
 # For "manual" documents, if this is true, then toplevel headings are parts,
 # not chapters.
-#latex_use_parts = False
+# latex_use_parts = False
 
 # If true, show page references after internal links.
-#latex_show_pagerefs = False
+# latex_show_pagerefs = False
 
 # If true, show URL addresses after external links.
-#latex_show_urls = False
+# latex_show_urls = False
 
 # Documents to append as an appendix to all manuals.
-#latex_appendices = []
+# latex_appendices = []
 
 # If false, no module index is generated.
-#latex_domain_indices = True
+# latex_domain_indices = True
 
 
 # -- Options for manual page output ---------------------------------------
@@ -229,7 +242,7 @@ man_pages = [
 ]
 
 # If true, show URL addresses after external links.
-#man_show_urls = False
+# man_show_urls = False
 
 
 # -- Options for Texinfo output -------------------------------------------
@@ -238,19 +251,19 @@ man_pages = [
 # (source start file, target name, title, author,
 #  dir menu entry, description, category)
 texinfo_documents = [
-  ('index', 'HOTguide', u'HOT guide',
+    ('index', 'HOTguide', u'HOT guide',
-   u'OpenStack Doc Team', 'HOTguide', 'One line description of project.',
+     u'OpenStack Doc Team', 'HOTguide', 'One line description of project.',
-   'Miscellaneous'),
+     'Miscellaneous'),
 ]
 
 # Documents to append as an appendix to all manuals.
-#texinfo_appendices = []
+# texinfo_appendices = []
 
 # If false, no module index is generated.
-#texinfo_domain_indices = True
+# texinfo_domain_indices = True
 
 # How to display URL addresses: 'footnote', 'no', or 'inline'.
-#texinfo_show_urls = 'footnote'
+# texinfo_show_urls = 'footnote'
 
 # If true, do not generate a @detailmenu in the "Top" node's menu.
-#texinfo_no_detailmenu = False
+# texinfo_no_detailmenu = False

doc/playground-user-guide/source/conf.py

@@ -1,5 +1,16 @@
-# -*- coding: utf-8 -*-
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
 #
+#    http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
+# implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
 # This file is execfile()d with the current directory set to its
 # containing dir.
 #
@@ -9,20 +20,20 @@
 # All configuration values have a default; values that are commented out
 # serve to show the default.
 
-import sys
+# import os
-import os
+# import sys
 
 import openstackdocstheme
 
 # If extensions (or modules to document with autodoc) are in another directory,
 # add these directories to sys.path here. If the directory is relative to the
 # documentation root, use os.path.abspath to make it absolute, like shown here.
-#sys.path.insert(0, os.path.abspath('.'))
+# sys.path.insert(0, os.path.abspath('.'))
 
 # -- General configuration ------------------------------------------------
 
 # If your documentation needs a minimal Sphinx version, state it here.
-#needs_sphinx = '1.0'
+# needs_sphinx = '1.0'
 
 # Add any Sphinx extension module names here, as strings. They can be
 # extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
@@ -30,13 +41,13 @@ import openstackdocstheme
 extensions = []
 
 # Add any paths that contain templates here, relative to this directory.
-#templates_path = ['_templates']
+# templates_path = ['_templates']
 
 # The suffix of source filenames.
 source_suffix = '.rst'
 
 # The encoding of source files.
-#source_encoding = 'utf-8-sig'
+# source_encoding = 'utf-8-sig'
 
 # The master toctree document.
 master_doc = 'index'
@@ -56,13 +67,13 @@ release = '0.0.1'
 
 # The language for content autogenerated by Sphinx. Refer to documentation
 # for a list of supported languages.
-#language = None
+# language = None
 
 # There are two options for replacing |today|: either, you set today to some
 # non-false value, then it is used:
-#today = ''
+# today = ''
 # Else, today_fmt is used as the format for a strftime call.
-#today_fmt = '%B %d, %Y'
+# today_fmt = '%B %d, %Y'
 
 # List of patterns, relative to source directory, that match files and
 # directories to ignore when looking for source files.
@@ -70,27 +81,27 @@ exclude_patterns = []
 
 # The reST default role (used for this markup: `text`) to use for all
 # documents.
-#default_role = None
+# default_role = None
 
 # If true, '()' will be appended to :func: etc. cross-reference text.
-#add_function_parentheses = True
+# add_function_parentheses = True
 
 # If true, the current module name will be prepended to all description
 # unit titles (such as .. function::).
-#add_module_names = True
+# add_module_names = True
 
 # If true, sectionauthor and moduleauthor directives will be shown in the
 # output. They are ignored by default.
-#show_authors = False
+# show_authors = False
 
 # The name of the Pygments (syntax highlighting) style to use.
 pygments_style = 'sphinx'
 
 # A list of ignored prefixes for module index sorting.
-#modindex_common_prefix = []
+# modindex_common_prefix = []
 
 # If true, keep warnings as "system message" paragraphs in the built documents.
-#keep_warnings = False
+# keep_warnings = False
 
 
 # -- Options for HTML output ----------------------------------------------
@@ -102,77 +113,77 @@ html_theme = 'openstackdocs'
 # Theme options are theme-specific and customize the look and feel of a theme
 # further.  For a list of options available for each theme, see the
 # documentation.
-#html_theme_options = {}
+# html_theme_options = {}
 
 # Add any paths that contain custom themes here, relative to this directory.
 html_theme_path = [openstackdocstheme.get_html_theme_path()]
 
 # The name for this set of Sphinx documents.  If None, it defaults to
 # "<project> v<release> documentation".
-#html_title = None
+# html_title = None
 
 # A shorter title for the navigation bar.  Default is the same as html_title.
-#html_short_title = None
+# html_short_title = None
 
 # The name of an image file (relative to this directory) to place at the top
 # of the sidebar.
-#html_logo = None
+# html_logo = None
 
 # The name of an image file (within the static path) to use as favicon of the
 # docs.  This file should be a Windows icon file (.ico) being 16x16 or 32x32
 # pixels large.
-#html_favicon = None
+# html_favicon = None
 
 # Add any paths that contain custom static files (such as style sheets) here,
 # relative to this directory. They are copied after the builtin static files,
 # so a file named "default.css" will overwrite the builtin "default.css".
-#html_static_path = []
+# html_static_path = []
 
 # Add any extra paths that contain custom files (such as robots.txt or
 # .htaccess) here, relative to this directory. These files are copied
 # directly to the root of the documentation.
-#html_extra_path = []
+# html_extra_path = []
 
 # If not '', a 'Last updated on:' timestamp is inserted at every page bottom,
 # using the given strftime format.
-#html_last_updated_fmt = '%b %d, %Y'
+# html_last_updated_fmt = '%b %d, %Y'
 
 # If true, SmartyPants will be used to convert quotes and dashes to
 # typographically correct entities.
-#html_use_smartypants = True
+# html_use_smartypants = True
 
 # Custom sidebar templates, maps document names to template names.
-#html_sidebars = {}
+# html_sidebars = {}
 
 # Additional templates that should be rendered to pages, maps page names to
 # template names.
-#html_additional_pages = {}
+# html_additional_pages = {}
 
 # If false, no module index is generated.
-#html_domain_indices = True
+# html_domain_indices = True
 
 # If false, no index is generated.
-#html_use_index = True
+# html_use_index = True
 
 # If true, the index is split into individual pages for each letter.
-#html_split_index = False
+# html_split_index = False
 
 # If true, links to the reST sources are added to the pages.
-#html_show_sourcelink = True
+# html_show_sourcelink = True
 
 # If true, "Created using Sphinx" is shown in the HTML footer. Default is True.
-#html_show_sphinx = True
+# html_show_sphinx = True
 
 # If true, "(C) Copyright ..." is shown in the HTML footer. Default is True.
-#html_show_copyright = True
+# html_show_copyright = True
 
 # If true, an OpenSearch description file will be output, and all pages will
 # contain a <link> tag referring to it.  The value of this option must be the
 # base URL from which the finished HTML is served.
-#html_use_opensearch = ''
+# html_use_opensearch = ''
 
 # This is the file name suffix for HTML files (e.g. ".xhtml").
-#html_file_suffix = None
+# html_file_suffix = None
 
 # Output file base name for HTML help builder.
 htmlhelp_basename = 'user-guide'
@@ -181,43 +192,43 @@ htmlhelp_basename = 'user-guide'
 # -- Options for LaTeX output ---------------------------------------------
 
 latex_elements = {
-# The paper size ('letterpaper' or 'a4paper').
+    # The paper size ('letterpaper' or 'a4paper').
-#'papersize': 'letterpaper',
+    # 'papersize': 'letterpaper',
 
-# The font size ('10pt', '11pt' or '12pt').
+    # The font size ('10pt', '11pt' or '12pt').
-#'pointsize': '10pt',
+    # 'pointsize': '10pt',
 
-# Additional stuff for the LaTeX preamble.
+    # Additional stuff for the LaTeX preamble.
-#'preamble': '',
+    # 'preamble': '',
 }
 
 # Grouping the document tree into LaTeX files. List of tuples
 # (source start file, target name, title,
 #  author, documentclass [howto, manual, or own class]).
 latex_documents = [
-  ('index', 'UserGuide.tex', u'User Guide',
+    ('index', 'UserGuide.tex', u'User Guide',
-   u'OpenStack contributors', 'manual'),
+     u'OpenStack contributors', 'manual'),
 ]
 
 # The name of an image file (relative to this directory) to place at the top of
 # the title page.
-#latex_logo = None
+# latex_logo = None
 
 # For "manual" documents, if this is true, then toplevel headings are parts,
 # not chapters.
-#latex_use_parts = False
+# latex_use_parts = False
 
 # If true, show page references after internal links.
-#latex_show_pagerefs = False
+# latex_show_pagerefs = False
 
 # If true, show URL addresses after external links.
-#latex_show_urls = False
+# latex_show_urls = False
 
 # Documents to append as an appendix to all manuals.
-#latex_appendices = []
+# latex_appendices = []
 
 # If false, no module index is generated.
-#latex_domain_indices = True
+# latex_domain_indices = True
 
 
 # -- Options for manual page output ---------------------------------------
@@ -230,7 +241,7 @@ man_pages = [
 ]
 
 # If true, show URL addresses after external links.
-#man_show_urls = False
+# man_show_urls = False
 
 
 # -- Options for Texinfo output -------------------------------------------
@@ -239,20 +250,21 @@ man_pages = [
 # (source start file, target name, title, author,
 #  dir menu entry, description, category)
 texinfo_documents = [
-  ('index', 'UserGuide', u'User Guide',
+    ('index', 'UserGuide', u'User Guide',
-   u'OpenStack contributors', 'UserGuide',
+     u'OpenStack contributors', 'UserGuide',
-   'This guide shows OpenStack end users how to create and manage resources in an OpenStack cloud with the OpenStack dashboard and OpenStack client commands.',
+     'This guide shows OpenStack end users how to create and manage resources '
-   'Miscellaneous'),
+     'in an OpenStack cloud with the OpenStack dashboard and OpenStack client '
+     'commands.', 'Miscellaneous'),
 ]
 
 # Documents to append as an appendix to all manuals.
-#texinfo_appendices = []
+# texinfo_appendices = []
 
 # If false, no module index is generated.
-#texinfo_domain_indices = True
+# texinfo_domain_indices = True
 
 # How to display URL addresses: 'footnote', 'no', or 'inline'.
-#texinfo_show_urls = 'footnote'
+# texinfo_show_urls = 'footnote'
 
 # If true, do not generate a @detailmenu in the "Top" node's menu.
-#texinfo_no_detailmenu = False
+# texinfo_no_detailmenu = False

test-requirements.txt

@@ -2,6 +2,8 @@
 # of appearance. Changing the order has an impact on the overall integration
 # process, which may cause wedges in the gate later.
 beautifulsoup4
+# Hacking already pins down pep8, pyflakes and flake8
+hacking>=0.10.0,<0.11
 Jinja2>=2.6  # BSD License (3 clause)
 doc8  # Apache-2.0
 openstack-doc-tools>=0.21.1

tools/www-generator.py

@@ -12,8 +12,6 @@
 # License for the specific language governing permissions and limitations
 # under the License.
 
-# author: Christian Berendt <berendt@b1-systems.de>
-
 import argparse
 import logging
 import os

tox.ini

@@ -26,6 +26,7 @@ commands = openstack-doc-test --check-links {posargs}
 commands =
   openstack-doc-test --check-niceness {posargs}
   doc8 doc
+  flake8
 
 [testenv:checksyntax]
 commands =
@@ -99,3 +100,11 @@ commands = doc-tools-check-languages doc-tools-check-languages.conf publish all
 ignore-path = doc/*/target
 # File extensions to use
 extensions = .rst,.txt
+
+[flake8]
+show-source = True
+# H803 skipped on purpose per list discussion.
+# E123, E125 skipped as they are invalid PEP-8.
+ignore = E123,E125,H803
+builtins = _
+exclude=.venv,.git,.tox,dist,*openstack/common*,*lib/python*,*egg,build,doc/common/samples