.. _environment-ntp-other: Other nodes ~~~~~~~~~~~ Other nodes reference the controller node for clock synchronization. Perform these steps on all other nodes. Install and configure components -------------------------------- 1. Install the packages: .. only:: ubuntu or debian .. code-block:: console # apt-get install chrony .. only:: rdo .. code-block:: console # yum install chrony .. only:: obs On openSUSE: .. code-block:: console # zypper addrepo -f obs://network:time/openSUSE_Leap_42.1 network_time # zypper refresh # zypper install chrony On SLES: .. code-block:: console # zypper addrepo -f obs://network:time/SLE_12_SP1 network_time # zypper refresh # zypper install chrony .. note:: The packages are signed by GPG key ``17280DDF``. You should verify the fingerprint of the imported GPG key before using it. .. code-block:: console Key Name: network OBS Project Key Fingerprint: 0080689B E757A876 CB7DC269 62EB1A09 17280DDF Key Created: Tue 24 Sep 2013 04:04:12 PM UTC Key Expires: Thu 03 Dec 2015 04:04:12 PM UTC .. only:: ubuntu or debian 2. Edit the ``/etc/chrony/chrony.conf`` file and comment out or remove all but one ``server`` key. Change it to reference the controller node: .. code-block:: ini server controller iburst 3. Restart the NTP service: .. code-block:: console # service chrony restart .. only:: rdo or obs 2. Edit the ``/etc/chrony.conf`` file and comment out or remove all but one ``server`` key. Change it to reference the controller node: .. code-block:: ini server controller iburst 3. Start the NTP service and configure it to start when the system boots: .. code-block:: console # systemctl enable chronyd.service # systemctl start chronyd.service