Create and manage networks
Before you run commands, set the following environment
variables:
export OS_USERNAME=admin
export OS_PASSWORD=password
export OS_TENANT_NAME=admin
export OS_AUTH_URL=http://localhost:5000/v2.0
Create networks
List the extensions of the system:
$ neutron ext-list -c alias -c name
+-----------------+--------------------------+
| alias | name |
+-----------------+--------------------------+
| agent_scheduler | Agent Schedulers |
| binding | Port Binding |
| quotas | Quota management support |
| agent | agent |
| provider | Provider Network |
| router | Neutron L3 Router |
| lbaas | LoadBalancing service |
| extraroute | Neutron Extra Route |
+-----------------+--------------------------+
Create a network:
$ neutron net-create net1
Created a new network:
+---------------------------+--------------------------------------+
| Field | Value |
+---------------------------+--------------------------------------+
| admin_state_up | True |
| id | 2d627131-c841-4e3a-ace6-f2dd75773b6d |
| name | net1 |
| provider:network_type | vlan |
| provider:physical_network | physnet1 |
| provider:segmentation_id | 1001 |
| router:external | False |
| shared | False |
| status | ACTIVE |
| subnets | |
| tenant_id | 3671f46ec35e4bbca6ef92ab7975e463 |
+---------------------------+--------------------------------------+
Some fields of the created network are
invisible to non-admin users.
Create a network with specified provider network
type:
$ neutron net-create net2 --provider:network-type local
Created a new network:
+---------------------------+--------------------------------------+
| Field | Value |
+---------------------------+--------------------------------------+
| admin_state_up | True |
| id | 524e26ea-fad4-4bb0-b504-1ad0dc770e7a |
| name | net2 |
| provider:network_type | local |
| provider:physical_network | |
| provider:segmentation_id | |
| router:external | False |
| shared | False |
| status | ACTIVE |
| subnets | |
| tenant_id | 3671f46ec35e4bbca6ef92ab7975e463 |
+---------------------------+--------------------------------------+
Just as shown previous, the unknown option
--provider:network-type is
used to create a local provider
network.
Create subnets
Create a subnet:
$ neutron subnet-create net1 192.168.2.0/24 --name subnet1
Created a new subnet:
+------------------+--------------------------------------------------+
| Field | Value |
+------------------+--------------------------------------------------+
| allocation_pools | {"start": "192.168.2.2", "end": "192.168.2.254"} |
| cidr | 192.168.2.0/24 |
| dns_nameservers | |
| enable_dhcp | True |
| gateway_ip | 192.168.2.1 |
| host_routes | |
| id | 15a09f6c-87a5-4d14-b2cf-03d97cd4b456 |
| ip_version | 4 |
| name | subnet1 |
| network_id | 2d627131-c841-4e3a-ace6-f2dd75773b6d |
| tenant_id | 3671f46ec35e4bbca6ef92ab7975e463 |
+------------------+--------------------------------------------------+
In the previous command, net1
is the network name,
192.168.2.0/24 is the
subnet's CIDR. They are positional arguments.
--name subnet1 is an
unknown option, which specifies the subnet's
name.
Create ports
Create a port with specified IP address:
$ neutron port-create net1 --fixed-ip ip_address=192.168.2.40
Created a new port:
+----------------------+-------------------------------------------------------------------------------------+
| Field | Value |
+----------------------+-------------------------------------------------------------------------------------+
| admin_state_up | True |
| binding:capabilities | {"port_filter": false} |
| binding:vif_type | ovs |
| device_id | |
| device_owner | |
| fixed_ips | {"subnet_id": "15a09f6c-87a5-4d14-b2cf-03d97cd4b456", "ip_address": "192.168.2.40"} |
| id | f7a08fe4-e79e-4b67-bbb8-a5002455a493 |
| mac_address | fa:16:3e:97:e0:fc |
| name | |
| network_id | 2d627131-c841-4e3a-ace6-f2dd75773b6d |
| status | DOWN |
| tenant_id | 3671f46ec35e4bbca6ef92ab7975e463 |
+----------------------+-------------------------------------------------------------------------------------+
In the previous command, net1
is the network name, which is a positional
argument. --fixed-ip
ip_address=192.168.2.40 is an
option, which specifies the port's fixed IP
address we wanted.
Create a port without specified IP
address:
$ neutron port-create net1
Created a new port:
+----------------------+------------------------------------------------------------------------------------+
| Field| Value |
+----------------------+------------------------------------------------------------------------------------+
| admin_state_up | True |
| binding:capabilities | {"port_filter": false} |
| binding:vif_type | ovs |
| device_id | |
| device_owner | |
| fixed_ips | {"subnet_id": "15a09f6c-87a5-4d14-b2cf-03d97cd4b456", "ip_address": "192.168.2.2"} |
| id | baf13412-2641-4183-9533-de8f5b91444c |
| mac_address | fa:16:3e:f6:ec:c7 |
| name | |
| network_id | 2d627131-c841-4e3a-ace6-f2dd75773b6d |
| status | DOWN |
| tenant_id | 3671f46ec35e4bbca6ef92ab7975e463 |
+----------------------+------------------------------------------------------------------------------------+
We can see that the system will allocate one IP
address if we don't specify the IP address in
command line.
Query ports with specified fixed IP
addresses:
$ neutron port-list --fixed-ips ip_address=192.168.2.2 ip_address=192.168.2.40
+--------------------------------------+------+-------------------+-------------------------------------------------------------------------------------+
| id | name | mac_address | fixed_ips |
+--------------------------------------+------+-------------------+-------------------------------------------------------------------------------------+
| baf13412-2641-4183-9533-de8f5b91444c | | fa:16:3e:f6:ec:c7 | {"subnet_id": "15a09f6c-87a5-4d14-b2cf-03d97cd4b456", "ip_address": "192.168.2.2"} |
| f7a08fe4-e79e-4b67-bbb8-a5002455a493 | | fa:16:3e:97:e0:fc | {"subnet_id": "15a09f6c-87a5-4d14-b2cf-03d97cd4b456", "ip_address": "192.168.2.40"} |
+--------------------------------------+------+-------------------+-------------------------------------------------------------------------------------+
--fixed-ips ip_address=192.168.2.2
ip_address=192.168.2.40 is one
unknown option.
How to find unknown
options? The unknown options can be
easily found by watching the output of
create_xxx or
show_xxx command. For
example, in the port creation command, we see the
fixed_ips fields, which can be used as an unknown
option.