A quota limits the number of available resources. A default quota might be enforced for all tenants. When you try to create more resources than the quota allows, an error occurs: $ neutron net-create test_net Quota exceeded for resources: ['network'] Per-tenant quota configuration is also supported by the quota extension API. See Per-tenant quota configuration for details.

In the Networking default quota mechanism, all tenants have the same quota values, such as the number of resources that a tenant can create. The quota value is defined in the OpenStack Networking neutron.conf configuration file. To disable quotas for a specific resource, such as network, subnet, or port, remove a corresponding item from quota_items. This example shows the default quota values: [quotas] # resource name(s) that are supported in quota features quota_items = network,subnet,port # number of networks allowed per tenant, and minus means unlimited quota_network = 10 # number of subnets allowed per tenant, and minus means unlimited quota_subnet = 10 # number of ports allowed per tenant, and minus means unlimited quota_port = 50 # default driver to use for quota checks quota_driver = neutron.quota.ConfDriver OpenStack Networking also supports quotas for L3 resources: router and floating IP. Add these lines to the quotas section in the neutron.conf file. [quotas] # number of routers allowed per tenant, and minus means unlimited quota_router = 10 # number of floating IPs allowed per tenant, and minus means unlimited quota_floatingip = 50 The quota_items option does not affect these quotas. OpenStack Networking also supports quotas for security group resources: number of security groups and the number of rules for each security group. Add these lines to the quotas section in the neutron.conf file: [quotas] # number of security groups per tenant, and minus means unlimited quota_security_group = 10 # number of security rules allowed per tenant, and minus means unlimited quota_security_group_rule = 100 The quota_items option does not affect these quotas.

OpenStack Networking also supports per-tenant quota limit by quota extension API. Use these commands to manage per-tenant quotas: neutron quota-delete. Deletes defined quotas for a specified tenant. neutron quota-list. Lists defined quotas for all tenants. neutron quota-show. Shows quotas for a specified tenant. neutron quota-update. Updates quotas for a specified tenant. Only users with the admin role can change a quota value. By default, the default set of quotas are enforced for all tenants, so no quota-create command exists. Set the quota_driver option in the neutron.conf file: quota_driver = neutron.db.quota_db.DbQuotaDriver When you set this option, the output for Networking commands shows quotas. To list the Networking extensions, run this command: $ neutron ext-list -c alias -c name The command shows the quotas extension, which provides per-tenant quota management support: +-----------------+--------------------------+ | alias | name | +-----------------+--------------------------+ | agent_scheduler | Agent Schedulers | | security-group | security-group | | binding | Port Binding | | quotas | Quota management support | | agent | agent | | provider | Provider Network | | router | Neutron L3 Router | | lbaas | LoadBalancing service | | extraroute | Neutron Extra Route | +-----------------+--------------------------+ To show information for the quotas extension, run this command: $ neutron ext-show quotas +-------------+------------------------------------------------------------+ | Field | Value | +-------------+------------------------------------------------------------+ | alias | quotas | | description | Expose functions for quotas management per tenant | | links | | | name | Quota management support | | namespace | http://docs.openstack.org/network/ext/quotas-sets/api/v2.0 | | updated | 2012-07-29T10:00:00-00:00 | +-------------+------------------------------------------------------------+ Only some plug-ins support per-tenant quotas. Specifically, Open vSwitch, Linux Bridge, and VMware NSX support them, but new versions of other plug-ins might bring additional functionality. See the documentation for each plug-in. The quota-list command lists tenants for which the per-tenant quota is enabled. The command does not list tenants with default quota support. You must be an administrative user to run this command: $ neutron quota-list +------------+---------+------+--------+--------+----------------------------------+ | floatingip | network | port | router | subnet | tenant_id | +------------+---------+------+--------+--------+----------------------------------+ | 20 | 5 | 20 | 10 | 5 | 6f88036c45344d9999a1f971e4882723 | | 25 | 10 | 30 | 10 | 10 | bff5c9455ee24231b5bc713c1b96d422 | +------------+---------+------+--------+--------+----------------------------------+ The quota-show reports the current set of quota limits for the specified tenant. Non-administrative users can run this command without the --tenant_id parameter. If per-tenant quota limits are not enabled for the tenant, the command shows the default set of quotas: $ neutron quota-show --tenant_id 6f88036c45344d9999a1f971e4882723 +------------+-------+ | Field | Value | +------------+-------+ | floatingip | 20 | | network | 5 | | port | 20 | | router | 10 | | subnet | 5 | +------------+-------+ The following command shows the command output for a non-administrative user: $ neutron quota-show +------------+-------+ | Field | Value | +------------+-------+ | floatingip | 20 | | network | 5 | | port | 20 | | router | 10 | | subnet | 5 | +------------+-------+ Use the quota-update command to update a quota for a specified tenant: $ neutron quota-update --tenant_id 6f88036c45344d9999a1f971e4882723 --network 5 +------------+-------+ | Field | Value | +------------+-------+ | floatingip | 50 | | network | 5 | | port | 50 | | router | 10 | | subnet | 10 | +------------+-------+ You can update quotas for multiple resources through one command: $ neutron quota-update --tenant_id 6f88036c45344d9999a1f971e4882723 --subnet 5 --port 20 +------------+-------+ | Field | Value | +------------+-------+ | floatingip | 50 | | network | 5 | | port | 20 | | router | 10 | | subnet | 5 | +------------+-------+ To update the limits for an L3 resource such as, router or floating IP, you must define new values for the quotas after the -- directive. This example updates the limit of the number of floating IPs for the specified tenant: $ neutron quota-update --tenant_id 6f88036c45344d9999a1f971e4882723 -- --floatingip 20 +------------+-------+ | Field | Value | +------------+-------+ | floatingip | 20 | | network | 5 | | port | 20 | | router | 10 | | subnet | 5 | +------------+-------+ You can update the limits of multiple resources by including L2 resources and L3 resource through one command. $ neutron quota-update --tenant_id 6f88036c45344d9999a1f971e4882723 --network 3 --subnet 3 --port 3 -- --floatingip 3 --router 3 +------------+-------+ | Field | Value | +------------+-------+ | floatingip | 3 | | network | 3 | | port | 3 | | router | 3 | | subnet | 3 | +------------+-------+ To clear per-tenant quota limits, use the quota-delete command: $ neutron quota-delete --tenant_id 6f88036c45344d9999a1f971e4882723 Deleted quota: 6f88036c45344d9999a1f971e4882723 After you run this command, you can see that quota values for the tenant are reset to the default values: $ neutron quota-show --tenant_id 6f88036c45344d9999a1f971e4882723 +------------+-------+ | Field | Value | +------------+-------+ | floatingip | 50 | | network | 10 | | port | 50 | | router | 10 | | subnet | 10 | +------------+-------+