Description of ML2 Cisco mechanism driver configuration options

Configuration option = Default value	Description
[DEFAULT]
apic_system_id = openstack	(StrOpt) Prefix for APIC domain/names/profiles created
[ml2_cisco]
managed_physical_network = None	(StrOpt) The physical network managed by the switches.
[ml2_cisco_apic]
apic_agent_poll_interval = 2	(FloatOpt) Interval between agent poll for topology (in sec)
apic_agent_report_interval = 30	(FloatOpt) Interval between agent status updates (in sec)
apic_app_profile_name = ${apic_system_id}_app	(StrOpt) Name for the app profile used for Openstack
apic_domain_name = ${apic_system_id}	(StrOpt) Name for the domain created on APIC
apic_entity_profile = ${apic_system_id}_entity_profile	(StrOpt) Name of the entity profile to be created
apic_function_profile = ${apic_system_id}_function_profile	(StrOpt) Name of the function profile to be created
apic_host_uplink_ports =	(ListOpt) The uplink ports to check for ACI connectivity
apic_hosts =	(ListOpt) An ordered list of host names or IP addresses of the APIC controller(s).
apic_lacp_profile = ${apic_system_id}_lacp_profile	(StrOpt) Name of the LACP profile to be created
apic_name_mapping = use_name	(StrOpt) Name mapping strategy to use: use_uuid | use_name
apic_node_profile = ${apic_system_id}_node_profile	(StrOpt) Name of the node profile to be created
apic_password = None	(StrOpt) Password for the APIC controller
apic_sync_interval = 0	(IntOpt) Synchronization interval in seconds
apic_use_ssl = True	(BoolOpt) Use SSL to connect to the APIC controller
apic_username = None	(StrOpt) Username for the APIC controller
apic_vlan_ns_name = ${apic_system_id}_vlan_ns	(StrOpt) Name for the vlan namespace to be used for Openstack
apic_vlan_range = 2:4093	(StrOpt) Range of VLAN's to be used for Openstack
apic_vpc_pairs =	(ListOpt) The switch pairs for VPC connectivity
root_helper = sudo /usr/local/bin/neutron-rootwrap /etc/neutron/rootwrap.conf	(StrOpt) Setup root helper as rootwrap or sudo