a591cded90
Changed run on sentence and sentence structure for clarity Removed additional white space after colon Change-Id: I88f9cc11ce667408997059cc900db35f6781e3cb
140 lines
4.8 KiB
Plaintext
140 lines
4.8 KiB
Plaintext
[[ch-network]]
|
|
=== Network Controller Cluster Stack
|
|
|
|
The Network controller sits on the management and data network, and needs to be connected to the Internet if a VM needs access to it.
|
|
|
|
NOTE: Both nodes should have the same hostname since the Neutron scheduler will be
|
|
aware of one node, for example a virtual router attached to a single L3 node.
|
|
|
|
==== Highly available Neutron L3 Agent
|
|
|
|
The Neutron L3 agent provides L3/NAT forwarding to ensure external network access
|
|
for VMs on tenant networks. High Availability for the L3 agent is achieved by
|
|
adopting Pacemaker.
|
|
|
|
NOTE: Here is the http://docs.openstack.org/trunk/config-reference/content/section_adv_cfg_l3_agent.html[documentation] for installing Neutron L3 Agent.
|
|
|
|
|
|
===== Adding Neutron L3 Agent resource to Pacemaker
|
|
First of all, you need to download the resource agent to your system:
|
|
|
|
----
|
|
cd /usr/lib/ocf/resource.d/openstack
|
|
wget https://raw.github.com/madkiss/openstack-resource-agents/master/ocf/neutron-l3-agent
|
|
chmod a+rx neutron-l3-agent
|
|
----
|
|
|
|
You may now proceed with adding the Pacemaker configuration for
|
|
Neutron L3 Agent resource. Connect to the Pacemaker cluster with +crm
|
|
configure+, and add the following cluster resources:
|
|
|
|
----
|
|
include::includes/pacemaker-network-l3.crm[]
|
|
----
|
|
|
|
This configuration creates
|
|
|
|
* +p_neutron-l3-agent+, a resource for manage Neutron L3 Agent service
|
|
|
|
+crm configure+ supports batch input, so you may copy and paste the
|
|
above into your live pacemaker configuration, and then make changes as
|
|
required.
|
|
|
|
Once completed, commit your configuration changes by entering +commit+
|
|
from the +crm configure+ menu. Pacemaker will then start the Neutron L3 Agent
|
|
service, and its dependent resources, on one of your nodes.
|
|
|
|
NOTE: This method does not ensure a zero downtime since it has to recreate all
|
|
the namespaces and virtual routers on the node.
|
|
|
|
|
|
==== Highly available Neutron DHCP Agent
|
|
|
|
Neutron DHCP agent distributes IP addresses to the VMs with dnsmasq (by
|
|
default). High Availability for the DHCP agent is achieved by adopting
|
|
Pacemaker.
|
|
|
|
NOTE: Here is the http://docs.openstack.org/trunk/config-reference/content/section_adv_cfg_dhcp_agent.html[documentation] for installing Neutron DHCP Agent.
|
|
|
|
|
|
===== Adding Neutron DHCP Agent resource to Pacemaker
|
|
First of all, you need to download the resource agent to your system :
|
|
|
|
----
|
|
cd /usr/lib/ocf/resource.d/openstack
|
|
wget https://raw.github.com/madkiss/openstack-resource-agents/master/ocf/neutron-dhcp-agent
|
|
chmod a+rx neutron-dhcp-agent
|
|
----
|
|
|
|
You may now proceed with adding the Pacemaker configuration for
|
|
Neutron DHCP Agent resource. Connect to the Pacemaker cluster with +crm
|
|
configure+, and add the following cluster resources:
|
|
|
|
----
|
|
include::includes/pacemaker-network-dhcp.crm[]
|
|
----
|
|
|
|
This configuration creates
|
|
|
|
* +p_neutron-dhcp-agent+, a resource for manage Neutron DHCP Agent
|
|
service
|
|
|
|
+crm configure+ supports batch input, so you may copy and paste the
|
|
above into your live pacemaker configuration, and then make changes as
|
|
required.
|
|
|
|
Once completed, commit your configuration changes by entering +commit+
|
|
from the +crm configure+ menu. Pacemaker will then start the Neutron DHCP
|
|
Agent service, and its dependent resources, on one of your nodes.
|
|
|
|
|
|
==== Highly available Neutron Metadata Agent
|
|
|
|
Neutron Metadata agent allows Nova API Metadata to be reachable by VMs on tenant
|
|
networks. High Availability for the Metadata agent is achieved by adopting
|
|
Pacemaker.
|
|
|
|
NOTE: Here is the http://docs.openstack.org/trunk/config-reference/content/networking-options-metadata.html[documentation] for installing Neutron Metadata Agent.
|
|
|
|
|
|
===== Adding Neutron Metadata Agent resource to Pacemaker
|
|
First of all, you need to download the resource agent to your system:
|
|
|
|
----
|
|
cd /usr/lib/ocf/resource.d/openstack
|
|
wget https://raw.github.com/madkiss/openstack-resource-agents/master/ocf/neutron-metadata-agent
|
|
chmod a+rx neutron-metadata-agent
|
|
----
|
|
|
|
You may now proceed with adding the Pacemaker configuration for
|
|
Neutron Metadata Agent resource. Connect to the Pacemaker cluster with +crm
|
|
configure+, and add the following cluster resources:
|
|
|
|
----
|
|
include::includes/pacemaker-network-metadata.crm[]
|
|
----
|
|
|
|
This configuration creates
|
|
|
|
* +p_neutron-metadata-agent+, a resource for manage Neutron Metadata Agent
|
|
service
|
|
|
|
+crm configure+ supports batch input, so you may copy and paste the
|
|
above into your live pacemaker configuration, and then make changes as
|
|
required.
|
|
|
|
Once completed, commit your configuration changes by entering +commit+
|
|
from the +crm configure+ menu. Pacemaker will then start the Neutron Metadata
|
|
Agent service, and its dependent resources, on one of your nodes.
|
|
|
|
|
|
==== Manage network resources
|
|
You may now proceed with adding the Pacemaker configuration for
|
|
managing all network resources together with a group.
|
|
Connect to the Pacemaker cluster with +crm configure+, and add the following
|
|
cluster resources:
|
|
|
|
----
|
|
include::includes/pacemaker-network.crm[]
|
|
----
|