openstack-manuals/doc/install-guide/object-storage/section_swift-storage-node.xml

<?xml version="1.0" encoding="UTF-8"?>
<section xmlns="http://docbook.org/ns/docbook"
  xmlns:xi="http://www.w3.org/2001/XInclude"
  xmlns:xlink="http://www.w3.org/1999/xlink"
  version="5.0"
  xml:id="swift-install-storage-node">
  <title>Install and configure the storage nodes</title>
  <para>This section describes how to install and configure storage nodes
    that operate the account, container, and object services. For
    simplicity, this configuration references two storage nodes, each
    containing two empty local block storage devices. Each of the
    devices, <literal>/dev/sdb</literal> and <literal>/dev/sdc</literal>,
    must contain a suitable partition table with one partition occupying
    the entire device. Although the Object Storage service supports any
    file system with <glossterm>extended attributes (xattr)</glossterm>,
    testing and benchmarking indicate the best performance and reliability
    on <glossterm>XFS</glossterm>. For more information on horizontally
    scaling your environment, see the
    <link xlink:href="http://docs.openstack.org/developer/swift/deployment_guide.html"
    >Deployment Guide</link>.</para>
  <procedure>
    <title>To configure prerequisites</title>
    <para>You must configure each storage node before you install and
      configure the Object Storage service on it. Similar to the controller
      node, each storage node contains one network interface on the
      <glossterm>management network</glossterm>. Optionally, each storage
      node can contain a second network interface on a separate network for
      replication. For more information, see
      <xref linkend="ch_basic_environment"/>.</para>
    <step>
      <para>Configure unique items on the first storage node:</para>
      <substeps>
        <step>
          <para>Configure the management interface:</para>
          <para>IP address: 10.0.0.51</para>
          <para>Network mask: 255.255.255.0 (or /24)</para>
          <para>Default gateway: 10.0.0.1</para>
        </step>
        <step>
          <para>Set the hostname of the node to
            <replaceable>object1</replaceable>.</para>
        </step>
      </substeps>
    </step>
    <step>
      <para>Configure unique items on the second storage node:</para>
      <substeps>
        <step>
          <para>Configure the management interface:</para>
          <para>IP address: 10.0.0.52</para>
          <para>Network mask: 255.255.255.0 (or /24)</para>
          <para>Default gateway: 10.0.0.1</para>
        </step>
        <step>
          <para>Set the hostname of the node to
            <replaceable>object2</replaceable>.</para>
        </step>
      </substeps>
    </step>
    <step>
      <para>Configure shared items on both storage nodes:</para>
      <substeps>
        <step>
          <para>Copy the contents of the <filename>/etc/hosts</filename> file
            from the controller node and add the following to it:</para>
          <programlisting language="ini"># object1
10.0.0.51        object1

# object2
10.0.0.52        object2</programlisting>
          <para>Also add this content to the <filename>/etc/hosts</filename>
            file on all other nodes in your environment.</para>
        </step>
        <step>
          <para>Install and configure
            <glossterm baseform="Network Time Protocol (NTP)">NTP</glossterm>
            using the instructions in
            <xref linkend="basics-ntp-other-nodes"/>.</para>
        </step>
        <step>
          <para>Install the supporting utility packages:</para>
          <screen os="ubuntu;debian"><prompt>#</prompt> <userinput>apt-get install xfsprogs rsync</userinput></screen>
          <screen os="rhel;centos;fedora"><prompt>#</prompt> <userinput>yum install xfsprogs rsync</userinput></screen>
          <screen os="sles;opensuse"><prompt>#</prompt> <userinput>zypper install xfsprogs rsync xinetd</userinput></screen>
        </step>
        <step>
          <para>Format the <literal>/dev/sdb1</literal> and
            <literal>/dev/sdc1</literal> partitions as XFS:</para>
          <screen><prompt>#</prompt> <userinput>mkfs.xfs /dev/sdb1</userinput>
<prompt>#</prompt> <userinput>mkfs.xfs /dev/sdc1</userinput></screen>
        </step>
        <step>
          <para>Create the mount point directory structure:</para>
          <screen><prompt>#</prompt> <userinput>mkdir -p /srv/node/sdb1</userinput>
<prompt>#</prompt> <userinput>mkdir -p /srv/node/sdc1</userinput></screen>
        </step>
        <step>
          <para>Edit the <filename>/etc/fstab</filename> file and add the
            following to it:</para>
          <programlisting language="ini">/dev/sdb1 /srv/node/sdb1 xfs noatime,nodiratime,nobarrier,logbufs=8 0 2
/dev/sdc1 /srv/node/sdc1 xfs noatime,nodiratime,nobarrier,logbufs=8 0 2</programlisting>
        </step>
        <step>
          <para>Mount the devices:</para>
          <screen><prompt>#</prompt> <userinput>mount /srv/node/sdb1</userinput>
<prompt>#</prompt> <userinput>mount /srv/node/sdc1</userinput></screen>
        </step>
      </substeps>
    </step>
    <step>
      <para>Edit the <filename>/etc/rsyncd.conf</filename> file and add the
        following to it:</para>
      <programlisting language="ini">uid = swift
gid = swift
log file = /var/log/rsyncd.log
pid file = /var/run/rsyncd.pid
address = <replaceable>MANAGEMENT_INTERFACE_IP_ADDRESS</replaceable>

[account]
max connections = 2
path = /srv/node/
read only = false
lock file = /var/lock/account.lock

[container]
max connections = 2
path = /srv/node/
read only = false
lock file = /var/lock/container.lock

[object]
max connections = 2
path = /srv/node/
read only = false
lock file = /var/lock/object.lock</programlisting>
      <para>Replace <replaceable>MANAGEMENT_INTERFACE_IP_ADDRESS</replaceable>
        with the IP address of the management network on the storage
        node.</para>
      <note>
        <para>The <systemitem role="service">rsync</systemitem> service
          requires no authentication, so consider running it on a private
          network.</para>
      </note>
    </step>
    <step os="ubuntu;debian">
      <para>Edit the <filename>/etc/default/rsync</filename> file and enable
        the <systemitem role="service">rsync</systemitem> service:</para>
      <programlisting language="ini">RSYNC_ENABLE=true</programlisting>
    </step>
    <step os="sles;opensuse">
      <para>Edit the <filename>/etc/xinetd.d/rsync</filename> file and enable
       the <systemitem role="service">rsync</systemitem> service:</para>
      <programlisting language="ini">disable = no</programlisting>
    </step>
    <step os="ubuntu;debian">
      <para>Start the <systemitem class="service">rsync</systemitem>
        service:</para>
      <screen><prompt>#</prompt> <userinput>service rsync start</userinput></screen>
    </step>
    <step os="rhel;centos;fedora">
      <para>Start the <systemitem class="service">rsyncd</systemitem> service
        and configure it to start when the system boots:</para>
      <screen><prompt>#</prompt> <userinput>systemctl enable rsyncd.service</userinput>
<prompt>#</prompt> <userinput>systemctl start rsyncd.service</userinput></screen>
    </step>
    <step os="sles;opensuse">
      <para>Start the <systemitem class="service">xinetd</systemitem> service
        and configure it to start when the system boots:</para>
      <para os="sles">On SLES:</para>
      <screen os="sles"><prompt>#</prompt> <userinput>service xinetd start</userinput>
<prompt>#</prompt> <userinput>chkconfig xinetd on</userinput></screen>
      <para os="opensuse">On openSUSE:</para>
      <screen os="opensuse"><prompt>#</prompt> <userinput>systemctl enable xinetd.service</userinput>
<prompt>#</prompt> <userinput>systemctl start xinetd.service</userinput></screen>
    </step>
  </procedure>
  <procedure>
    <title>Install and configure storage node components</title>
    <note>
      <para>Perform these steps on each storage node.</para>
    </note>
    <step>
      <para>Install the packages:</para>
      <screen os="ubuntu;debian"><prompt>#</prompt> <userinput>apt-get install swift swift-account swift-container swift-object</userinput></screen>
      <screen os="rhel;centos;fedora"><prompt>#</prompt> <userinput>yum install openstack-swift-account openstack-swift-container \
  openstack-swift-object</userinput></screen>
      <screen os="opensuse;sles"><prompt>#</prompt> <userinput>zypper install openstack-swift-account openstack-swift-container \
  openstack-swift-object python-xml</userinput></screen>
    </step>
    <step os="ubuntu;debian;rhel;centos;fedora">
      <para>Obtain the accounting, container, and object service configuration
        files from the Object Storage source repository:</para>
      <screen><prompt>#</prompt> <userinput>curl -o /etc/swift/account-server.conf \
  https://raw.githubusercontent.com/openstack/swift/stable/juno/etc/account-server.conf-sample</userinput></screen>
      <screen><prompt>#</prompt> <userinput>curl -o /etc/swift/container-server.conf \
  https://raw.githubusercontent.com/openstack/swift/stable/juno/etc/container-server.conf-sample</userinput></screen>
      <screen><prompt>#</prompt> <userinput>curl -o /etc/swift/object-server.conf \
  https://raw.githubusercontent.com/openstack/swift/stable/juno/etc/object-server.conf-sample</userinput></screen>
    </step>
    <step>
      <para>Edit the
        <filename>/etc/swift/account-server.conf</filename> file and
        complete the following actions:</para>
      <substeps>
        <step>
          <para>In the <literal>[DEFAULT]</literal> section, configure the
            bind IP address, bind port, user, configuration directory, and
            mount point directory:</para>
          <programlisting language="ini">[DEFAULT]
...
bind_ip = <replaceable>MANAGEMENT_INTERFACE_IP_ADDRESS</replaceable>
bind_port = 6002
user = swift
swift_dir = /etc/swift
devices = /srv/node</programlisting>
          <para>Replace
            <replaceable>MANAGEMENT_INTERFACE_IP_ADDRESS</replaceable>
            with the IP address of the management network on the storage
            node.</para>
        </step>
        <step>
          <para>In the <literal>[pipeline:main]</literal> section, enable
            the appropriate modules:</para>
          <programlisting language="ini">[pipeline:main]
pipeline = healthcheck recon account-server</programlisting>
          <note>
            <para>For more information on other modules that enable
             additional features, see the
             <link xlink:href="http://docs.openstack.org/developer/swift/deployment_guide.html"
             >Deployment Guide</link>.</para>
          </note>
        </step>
        <step>
          <para>In the <literal>[filter:recon]</literal> section, configure
            the recon (metrics) cache directory:</para>
          <programlisting language="ini">[filter:recon]
...
recon_cache_path = /var/cache/swift</programlisting>
        </step>
      </substeps>
    </step>
    <step>
      <para>Edit the
        <filename>/etc/swift/container-server.conf</filename> file and
        complete the following actions:</para>
      <substeps>
        <step>
          <para>In the <literal>[DEFAULT]</literal> section, configure the
            bind IP address, bind port, user, configuration directory, and
            mount point directory:</para>
          <programlisting language="ini">[DEFAULT]
...
bind_ip = <replaceable>MANAGEMENT_INTERFACE_IP_ADDRESS</replaceable>
bind_port = 6001
user = swift
swift_dir = /etc/swift
devices = /srv/node</programlisting>
          <para>Replace
            <replaceable>MANAGEMENT_INTERFACE_IP_ADDRESS</replaceable>
            with the IP address of the management network on the storage
            node.</para>
        </step>
        <step>
          <para>In the <literal>[pipeline:main]</literal> section, enable
            the appropriate modules:</para>
          <programlisting language="ini">[pipeline:main]
pipeline = healthcheck recon container-server</programlisting>
          <note>
            <para>For more information on other modules that enable
             additional features, see the
             <link xlink:href="http://docs.openstack.org/developer/swift/deployment_guide.html"
             >Deployment Guide</link>.</para>
          </note>
        </step>
        <step>
          <para>In the <literal>[filter:recon]</literal> section, configure
            the recon (metrics) cache directory:</para>
          <programlisting language="ini">[filter:recon]
...
recon_cache_path = /var/cache/swift</programlisting>
        </step>
      </substeps>
    </step>
    <step>
      <para>Edit the
        <filename>/etc/swift/object-server.conf</filename> file and
        complete the following actions:</para>
      <substeps>
        <step>
          <para>In the <literal>[DEFAULT]</literal> section, configure the
            bind IP address, bind port, user, configuration directory, and
            mount point directory:</para>
          <programlisting language="ini">[DEFAULT]
...
bind_ip = <replaceable>MANAGEMENT_INTERFACE_IP_ADDRESS</replaceable>
bind_port = 6000
user = swift
swift_dir = /etc/swift
devices = /srv/node</programlisting>
          <para>Replace
            <replaceable>MANAGEMENT_INTERFACE_IP_ADDRESS</replaceable>
            with the IP address of the management network on the storage
            node.</para>
        </step>
        <step>
          <para>In the <literal>[pipeline:main]</literal> section, enable
            the appropriate modules:</para>
          <programlisting language="ini">[pipeline:main]
pipeline = healthcheck recon object-server</programlisting>
          <note>
            <para>For more information on other modules that enable
             additional features, see the
             <link xlink:href="http://docs.openstack.org/developer/swift/deployment_guide.html"
             >Deployment Guide</link>.</para>
          </note>
        </step>
        <step>
          <para>In the <literal>[filter:recon]</literal> section, configure
            the recon (metrics) cache directory:</para>
          <programlisting language="ini">[filter:recon]
...
recon_cache_path = /var/cache/swift</programlisting>
        </step>
      </substeps>
    </step>
    <step>
      <para>Ensure proper ownership of the mount point directory
        structure:</para>
      <screen><prompt>#</prompt> <userinput>chown -R swift:swift /srv/node</userinput></screen>
    </step>
    <step>
      <para>Create the <literal>recon</literal> directory and ensure proper
        ownership of it:</para>
      <screen><prompt>#</prompt> <userinput>mkdir -p /var/cache/swift</userinput>
<prompt>#</prompt> <userinput>chown -R swift:swift /var/cache/swift</userinput></screen>
    </step>
  </procedure>
</section>