openstack/openstack-manuals
Code Issues Proposed changes
a7b79cb34c
openstack-manuals/doc/install-guide/section_launch-instance-neutron.xml
Gauvain Pocentek 20ce172d50 Use the same cirros image ID everywhere 
Update the ID of the cirros image in code examples for consistency.

Also fix the image name where it wasn't updated (0.3.1 -> 0.3.2).

Change-Id: I254cffb43652e0ed706cfe31c90a7148780a8630
2014-04-21 10:42:17 +02:00

294 lines
18 KiB
XML
Raw Blame History

<?xml version="1.0" encoding="UTF-8"?>
<section xmlns="http://docbook.org/ns/docbook"
xmlns:xi="http://www.w3.org/2001/XInclude"
xmlns:xlink="http://www.w3.org/1999/xlink" version="5.0"
xml:id="launch-instance-neutron">
<title>Launch an instance with OpenStack Networking (neutron)</title>
<procedure>
<title>To generate a keypair</title>
<para>Most cloud images support
<glossterm>public key authentication</glossterm> rather than conventional
username/password authentication. Before launching an instance, you must
generate a public/private key pair using <command>ssh-keygen</command>
and add the public key to your OpenStack environment.</para>
<step>
<para>Source the <literal>demo</literal> tenant credentials:</para>
<screen><prompt>$</prompt> <userinput>source demo-openrc.sh</userinput></screen>
</step>
<step>
<para>Generate a key pair:</para>
<screen><prompt>$</prompt> <userinput>ssh-keygen</userinput></screen>
</step>
<step>
<para>Add the public key to your OpenStack environment:</para>
<screen><prompt>$</prompt> <userinput>nova keypair-add --pub-key ~/.ssh/id_rsa.pub demo-key</userinput></screen>
<note>
<para>This command provides no output.</para>
</note>
</step>
<step>
<para>Verify addition of the public key:</para>
<screen><prompt>$</prompt> <userinput>nova keypair-list</userinput>
<computeroutput>+----------+-------------------------------------------------+
| Name | Fingerprint |
+----------+-------------------------------------------------+
| demo-key | 6c:74:ec:3a:08:05:4e:9e:21:22:a6:dd:b2:62:b8:28 |
+----------+-------------------------------------------------+</computeroutput></screen>
</step>
</procedure>
<procedure>
<title>To launch an instance</title>
<para>To launch an instance, you must at least specify the flavor, image
name, network, security group, key, and instance name.</para>
<step>
<para>A flavor specifies a virtual resource allocation profile which
includes processor, memory, and storage.</para>
<para>List available flavors:</para>
<screen><prompt>$</prompt> <userinput>nova flavor-list</userinput>
<computeroutput>+----+-----------+-----------+------+-----------+------+-------+-------------+-----------+
| ID | Name | Memory_MB | Disk | Ephemeral | Swap | VCPUs | RXTX_Factor | Is_Public |
+----+-----------+-----------+------+-----------+------+-------+-------------+-----------+
| 1 | m1.tiny | 512 | 1 | 0 | | 1 | 1.0 | True |
| 2 | m1.small | 2048 | 20 | 0 | | 1 | 1.0 | True |
| 3 | m1.medium | 4096 | 40 | 0 | | 2 | 1.0 | True |
| 4 | m1.large | 8192 | 80 | 0 | | 4 | 1.0 | True |
| 5 | m1.xlarge | 16384 | 160 | 0 | | 8 | 1.0 | True |
+----+-----------+-----------+------+-----------+------+-------+-------------+-----------+</computeroutput></screen>
<para>Your first instance uses the <literal>m1.tiny</literal>
flavor.</para>
<note>
<para>You can also reference a flavor by ID.</para>
</note>
</step>
<step>
<para>List available images:</para>
<screen><prompt>$</prompt> <userinput>nova image-list</userinput>
<computeroutput>+--------------------------------------+---------------------+--------+--------+
| ID | Name | Status | Server |
+--------------------------------------+---------------------+--------+--------+
| acafc7c0-40aa-4026-9673-b879898e1fc2 | cirros-0.3.2-x86_64 | ACTIVE | |
+--------------------------------------+---------------------+--------+--------+</computeroutput></screen>
<para>Your first instance uses the
<literal>cirros-0.3.2-x86_64</literal> image.</para>
</step>
<step>
<para>List available networks:</para>
<screen><prompt>$</prompt> <userinput>neutron net-list</userinput>
<computeroutput>+--------------------------------------+----------+-------------------------------------------------------+
| id | name | subnets |
+--------------------------------------+----------+-------------------------------------------------------+
| 3c612b5a-d1db-498a-babb-a4c50e344cb1 | demo-net | 20bcd3fd-5785-41fe-ac42-55ff884e3180 192.168.1.0/24 |
| 9bce64a3-a963-4c05-bfcd-161f708042d1 | ext-net | b54a8d85-b434-4e85-a8aa-74873841a90d 203.0.113.0/24 |
+--------------------------------------+----------+-------------------------------------------------------+</computeroutput></screen>
<para>Your first instance uses the <literal>demo-net</literal> tenant
network. However, you must reference this network using the ID instead
of the name.</para>
</step>
<step>
<para>List available security groups:</para>
<screen><prompt>$</prompt> <userinput>nova secgroup-list</userinput>
<computeroutput>+--------------------------------------+---------+-------------+
| Id | Name | Description |
+--------------------------------------+---------+-------------+
| ad8d4ea5-3cad-4f7d-b164-ada67ec59473 | default | default |
+--------------------------------------+---------+-------------+</computeroutput></screen>
<para>Your first instance uses the <literal>default</literal> security
group. By default, this security group implements a firewall that
blocks remote access to instances. If you would like to permit
remote access to your instance, launch it and then
<link linkend="launch-instance-neutron-remoteaccess">
configure remote access</link>.</para>
</step>
<step>
<para>Launch the instance:</para>
<para>Replace <replaceable>DEMO_NET_ID</replaceable> with the ID of the
<literal>demo-net</literal> tenant network.</para>
<screen><prompt>$</prompt> <userinput>nova boot --flavor m1.tiny --image cirros-0.3.2-x86_64 --nic net-id=<replaceable>DEMO_NET_ID</replaceable> \
--security-group default --key-name demo-key <replaceable>demo-instance1</replaceable></userinput>
<computeroutput>+--------------------------------------+------------------------------------------------------------+
| Property | Value |
+--------------------------------------+------------------------------------------------------------+
| OS-DCF:diskConfig | MANUAL |
| OS-EXT-AZ:availability_zone | nova |
| OS-EXT-STS:power_state | 0 |
| OS-EXT-STS:task_state | scheduling |
| OS-EXT-STS:vm_state | building |
| OS-SRV-USG:launched_at | - |
| OS-SRV-USG:terminated_at | - |
| accessIPv4 | |
| accessIPv6 | |
| adminPass | vFW7Bp8PQGNo |
| config_drive | |
| created | 2014-04-09T19:24:27Z |
| flavor | m1.tiny (1) |
| hostId | |
| id | 05682b91-81a1-464c-8f40-8b3da7ee92c5 |
| image | cirros-0.3.2-x86_64 (acafc7c0-40aa-4026-9673-b879898e1fc2) |
| key_name | demo-key |
| metadata | {} |
| name | demo-instance1 |
| os-extended-volumes:volumes_attached | [] |
| progress | 0 |
| security_groups | default |
| status | BUILD |
| tenant_id | 7cf50047f8df4824bc76c2fdf66d11ec |
| updated | 2014-04-09T19:24:27Z |
| user_id | 0e47686e72114d7182f7569d70c519c9 |
+--------------------------------------+------------------------------------------------------------+</computeroutput></screen>
</step>
<step>
<para>Check the status of your instance:</para>
<screen><prompt>$</prompt> <userinput>nova list</userinput>
<computeroutput>+--------------------------------------+----------------+--------+------------+-------------+-------------------------+
| ID | Name | Status | Task State | Power State | Networks |
+--------------------------------------+----------------+--------+------------+-------------+-------------------------+
| 05682b91-81a1-464c-8f40-8b3da7ee92c5 | demo-instance1 | ACTIVE | - | Running | demo-net=192.168.1.3 |
+--------------------------------------+----------------+--------+------------+-------------+-------------------------+</computeroutput></screen>
<para>The status changes from <literal>BUILD</literal> to
<literal>ACTIVE</literal> when your instance finishes the build
process.</para>
</step>
</procedure>
<procedure>
<title>To access your instance using a virtual console</title>
<step>
<para>Obtain a <glossterm>Virtual Network Computing (VNC)</glossterm>
session URL for your instance and access it from a web browser:</para>
<screen><prompt>$</prompt> <userinput>nova get-vnc-console <replaceable>demo-instance1</replaceable> novnc</userinput>
<computeroutput>+-------+------------------------------------------------------------------------------------+
| Type | Url |
+-------+------------------------------------------------------------------------------------+
| novnc | http://controller:6080/vnc_auto.html?token=2f6dd985-f906-4bfc-b566-e87ce656375b |
+-------+------------------------------------------------------------------------------------+</computeroutput></screen>
<note>
<para>If your web browser runs on a host that cannot resolve the
<replaceable>controller</replaceable> host name, you can replace
<replaceable>controller</replaceable> with the IP address of the
management interface on your controller node.</para>
</note>
<para>The CirrOS image includes conventional username/password
authentication and provides these credentials at the login prompt.
After logging into CirrOS, we recommend that you verify network
connectivity using <command>ping</command>.</para>
<para>Verify the <literal>demo-net</literal> tenant network
gateway:</para>
<screen><prompt>$</prompt> <userinput>ping -c 4 192.168.1.1</userinput>
<computeroutput>PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
64 bytes from 192.168.1.1: icmp_req=1 ttl=64 time=0.357 ms
64 bytes from 192.168.1.1: icmp_req=2 ttl=64 time=0.473 ms
64 bytes from 192.168.1.1: icmp_req=3 ttl=64 time=0.504 ms
64 bytes from 192.168.1.1: icmp_req=4 ttl=64 time=0.470 ms
--- 192.168.1.1 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 2998ms
rtt min/avg/max/mdev = 0.357/0.451/0.504/0.055 ms</computeroutput></screen>
<para>Verify the <literal>ext-net</literal> external network:</para>
<screen><prompt>$</prompt> <userinput>ping -c 4 openstack.org</userinput>
<computeroutput>PING openstack.org (174.143.194.225) 56(84) bytes of data.
64 bytes from 174.143.194.225: icmp_req=1 ttl=53 time=17.4 ms
64 bytes from 174.143.194.225: icmp_req=2 ttl=53 time=17.5 ms
64 bytes from 174.143.194.225: icmp_req=3 ttl=53 time=17.7 ms
64 bytes from 174.143.194.225: icmp_req=4 ttl=53 time=17.5 ms
--- openstack.org ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3003ms
rtt min/avg/max/mdev = 17.431/17.575/17.734/0.143 ms</computeroutput></screen>
</step>
</procedure>
<procedure xml:id="launch-instance-neutron-remoteaccess">
<title>To access your instance remotely</title>
<step>
<para>Add rules to the <literal>default</literal> security group:</para>
<substeps>
<step>
<para>Permit <glossterm>ICMP</glossterm> (ping):</para>
<screen><prompt>$</prompt> <userinput>nova secgroup-add-rule default icmp -1 -1 0.0.0.0/0</userinput>
<computeroutput>+-------------+-----------+---------+-----------+--------------+
| IP Protocol | From Port | To Port | IP Range | Source Group |
+-------------+-----------+---------+-----------+--------------+
| icmp | -1 | -1 | 0.0.0.0/0 | |
+-------------+-----------+---------+-----------+--------------+</computeroutput></screen>
</step>
<step>
<para>Permit secure shell (SSH) access:</para>
<screen><prompt>$</prompt> <userinput>nova secgroup-add-rule default tcp 22 22 0.0.0.0/0</userinput>
<computeroutput>+-------------+-----------+---------+-----------+--------------+
| IP Protocol | From Port | To Port | IP Range | Source Group |
+-------------+-----------+---------+-----------+--------------+
| tcp | 22 | 22 | 0.0.0.0/0 | |
+-------------+-----------+---------+-----------+--------------+</computeroutput></screen>
</step>
</substeps>
</step>
<step>
<para>Create a <glossterm>floating IP address</glossterm> on the
<literal>ext-net</literal> external network:</para>
<screen><prompt>$</prompt> <userinput>neutron floatingip-create ext-net</userinput>
<computeroutput>Created a new floatingip:
+---------------------+--------------------------------------+
| Field | Value |
+---------------------+--------------------------------------+
| fixed_ip_address | |
| floating_ip_address | 203.0.113.102 |
| floating_network_id | 9bce64a3-a963-4c05-bfcd-161f708042d1 |
| id | 05e36754-e7f3-46bb-9eaa-3521623b3722 |
| port_id | |
| router_id | |
| status | DOWN |
| tenant_id | 7cf50047f8df4824bc76c2fdf66d11ec |
+---------------------+--------------------------------------+</computeroutput></screen>
</step>
<step>
<para>Associate the floating IP address with your instance:</para>
<screen><prompt>$</prompt> <userinput>nova floating-ip-associate demo-instance1 203.0.113.102</userinput></screen>
<note>
<para>This command provides no output.</para>
</note>
</step>
<step>
<para>Check the status of your floating IP address:</para>
<screen><prompt>$</prompt> <userinput>nova list</userinput>
<computeroutput>+--------------------------------------+----------------+--------+------------+-------------+-----------------------------------------+
| ID | Name | Status | Task State | Power State | Networks |
+--------------------------------------+----------------+--------+------------+-------------+-----------------------------------------+
| 05682b91-81a1-464c-8f40-8b3da7ee92c5 | demo-instance1 | ACTIVE | - | Running | demo-net=192.168.1.3, 203.0.113.102 |
+--------------------------------------+----------------+--------+------------+-------------+-----------------------------------------+</computeroutput></screen>
</step>
<step>
<para>Verify network connectivity using <command>ping</command> from the
controller node or any host on the external network:</para>
<screen><prompt>$</prompt> <userinput>ping -c 4 203.0.113.102</userinput>
<computeroutput>PING 203.0.113.102 (203.0.113.112) 56(84) bytes of data.
64 bytes from 203.0.113.102: icmp_req=1 ttl=63 time=3.18 ms
64 bytes from 203.0.113.102: icmp_req=2 ttl=63 time=0.981 ms
64 bytes from 203.0.113.102: icmp_req=3 ttl=63 time=1.06 ms
64 bytes from 203.0.113.102: icmp_req=4 ttl=63 time=0.929 ms
--- 203.0.113.102 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3002ms
rtt min/avg/max/mdev = 0.929/1.539/3.183/0.951 ms</computeroutput></screen>
</step>
<step>
<para>Access your instance using SSH from the controller node or any
host on the external network:</para>
<screen><prompt>$</prompt> <userinput>ssh cirros@203.0.113.102</userinput>
<computeroutput>The authenticity of host '203.0.113.102 (203.0.113.102)' can't be established.
RSA key fingerprint is ed:05:e9:e7:52:a0:ff:83:68:94:c7:d1:f2:f8:e2:e9.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '203.0.113.102' (RSA) to the list of known hosts.
$</computeroutput></screen>
<note>
<para>If your host does not contain the public/private key pair created
in an earlier step, SSH prompts for the default password associated
with the <literal>cirros</literal> user.</para>
</note>
</step>
</procedure>
<para>If your instance does not launch or seem to work as you expect, see the
<link xlink:href="http://docs.openstack.org/ops">
<citetitle>OpenStack Operations Guide</citetitle></link> for more
information or use one of the
<link linkend="app_community_support">many other options</link> to seek
assistance. We want your environment to work!</para>
</section>
View Git Blame Copy Permalink