63211b943a
removed extra spaces changed datas to data Change-Id: I6496d64280df6f86496340a5a8dd99a5cea31e41
79 lines
3.1 KiB
Plaintext
79 lines
3.1 KiB
Plaintext
[[s-neutron-server]]
|
|
==== Highly available OpenStack Networking Server
|
|
|
|
OpenStack Networking is the network connectivity service in OpenStack.
|
|
Making the OpenStack Networking Server service highly available in active / passive mode involves
|
|
|
|
* configuring OpenStack Networking to listen on the VIP address,
|
|
* managing OpenStack Networking API Server daemon with the Pacemaker cluster manager,
|
|
* configuring OpenStack services to use this IP address.
|
|
|
|
NOTE: Here is the http://docs.openstack.org/trunk/install-guide/install/apt/content/ch_installing-openstack-networking.html[documentation] for installing OpenStack Networking service.
|
|
|
|
|
|
===== Adding OpenStack Networking Server resource to Pacemaker
|
|
|
|
First of all, you need to download the resource agent to your system:
|
|
----
|
|
cd /usr/lib/ocf/resource.d/openstack
|
|
wget https://raw.github.com/madkiss/openstack-resource-agents/master/ocf/neutron-server
|
|
chmod a+rx *
|
|
----
|
|
|
|
You may now proceed with adding the Pacemaker configuration for
|
|
OpenStack Networking Server resource. Connect to the Pacemaker cluster with +crm
|
|
configure+, and add the following cluster resources:
|
|
----
|
|
include::includes/pacemaker-neutron_server.crm[]
|
|
----
|
|
|
|
This configuration creates +p_neutron-server+, a resource for manage OpenStack Networking Server service
|
|
|
|
+crm configure+ supports batch input, so you may copy and paste the
|
|
above into your live pacemaker configuration, and then make changes as
|
|
required. For example, you may enter +edit p_neutron-server+ from the
|
|
+crm configure+ menu and edit the resource to match your preferred
|
|
virtual IP address.
|
|
|
|
Once completed, commit your configuration changes by entering +commit+
|
|
from the +crm configure+ menu. Pacemaker will then start the OpenStack Networking API
|
|
service, and its dependent resources, on one of your nodes.
|
|
|
|
===== Configuring OpenStack Networking Server
|
|
|
|
Edit +/etc/neutron/neutron.conf+ :
|
|
----
|
|
# We bind the service to the VIP:
|
|
bind_host = 192.168.42.103
|
|
|
|
# We bind OpenStack Networking Server to the VIP:
|
|
bind_host = 192.168.42.103
|
|
|
|
# We send notifications to Highly available RabbitMQ:
|
|
notifier_strategy = rabbit
|
|
rabbit_host = 192.168.42.102
|
|
|
|
[database]
|
|
# We have to use MySQL connection to store data:
|
|
connection = mysql://neutron:password@192.168.42.101/neutron
|
|
----
|
|
|
|
|
|
===== Configuring OpenStack Services to use Highly available OpenStack Networking Server
|
|
|
|
Your OpenStack services must now point their OpenStack Networking Server configuration to
|
|
the highly available, virtual cluster IP address -- rather than an
|
|
OpenStack Networking server's physical IP address as you normally would.
|
|
|
|
For example, you should configure OpenStack Compute for using Highly Available OpenStack Networking Server in editing +nova.conf+ file:
|
|
----
|
|
neutron_url = http://192.168.42.103:9696
|
|
----
|
|
|
|
You need to create the OpenStack Networking Server Endpoint with this IP.
|
|
|
|
NOTE : If you are using both private and public IP addresses, you should create two Virtual IP addresses and define your endpoint like this:
|
|
----
|
|
keystone endpoint-create --region $KEYSTONE_REGION --service-id $service-id --publicurl 'http://PUBLIC_VIP:9696/' --adminurl 'http://192.168.42.103:9696/' --internalurl 'http://192.168.42.103:9696/'
|
|
----
|