require 'spec_helper'

describe 'neutron::agents::n1kv_vem' do
  shared_examples 'neutron::agents::n1kv_vem' do
    it 'should have a n1kv-vem config file' do
      should contain_file('/etc/n1kv/n1kv.conf').with(
        :ensure  => 'present',
        :owner   => 'root',
        :group   => 'root',
        :mode    => '0664'
      )
    end

    it 'install n1kv-vem' do
      should contain_service('openvswitch').with_notify(['Package[nexus1000v]'])
      should contain_package('nexus1000v').with_notify(['Service[nexus1000v]'])
      should contain_service('nexus1000v').with_ensure('running')
    end

    context 'with local file vem rpm' do
      let :params do
        {
          :n1kv_source => 'vem.rpm'
        }
      end

      it 'verify dependency' do
        should contain_package('nexus1000v').with_source('/var/n1kv/vem.rpm')
        should contain_file('/var/n1kv/vem.rpm').that_requires('File[/var/n1kv]')
        should contain_file('/var/n1kv/vem.rpm').with(
          :owner   => 'root',
          :group   => 'root',
          :mode    => '0664'
        )
      end
    end

    context 'remote vem rpm' do
      let :params do
        {
          :n1kv_source => 'http://www.cisco.com/repo'
        }
      end

      it 'verify dependency' do
        should contain_package('nexus1000v').without_source
        should contain_yumrepo('cisco-vem-repo').with(
          :baseurl  => 'http://www.cisco.com/repo',
          :enabled => 1
        )
      end
    end

    it 'execute reread config upon config change' do
      should contain_exec('vemcmd reread config') \
        .that_subscribes_to('File[/etc/n1kv/n1kv.conf]')
    end

    context 'verify n1kv.conf default' do
      let :params do
      {
        :n1kv_vsm_ip        => '9.0.0.1',
        :n1kv_vsm_ipv6      => '::3',
        :n1kv_vsm_domain_id => 900,
        :host_mgmt_intf     => 'eth9',
        :portdb             => 'ovs',
        :fastpath_flood     => 'enable'
      }
      end

      it do
        should contain_file('/etc/n1kv/n1kv.conf') \
          .with_content(/^l3control-ipaddr 9.0.0.1/)
        should contain_file('/etc/n1kv/n1kv.conf') \
          .with_content(/^l3control-ipv6addr ::3/)
        should contain_file('/etc/n1kv/n1kv.conf') \
          .with_content(/^switch-domain 900/)
        should contain_file('/etc/n1kv/n1kv.conf') \
          .with_content(/^host-mgmt-intf eth9/)
        should contain_file('/etc/n1kv/n1kv.conf') \
          .with_content(/^portdb ovs/)
        should contain_file('/etc/n1kv/n1kv.conf') \
          .without_content(/^phys/)
        should contain_file('/etc/n1kv/n1kv.conf') \
          .without_content(/^virt/)
        should contain_file('/etc/n1kv/n1kv.conf') \
          .with_content(/^node-type compute/)
        should contain_file('/etc/n1kv/n1kv.conf') \
          .with_content(/^fastpath-flood enable/)
      end
    end

    context 'verify n1kv.conf svs-mode with default IPv6 address' do
      let :params do
      {
        :n1kv_vsm_ipv6 => '::1'
      }
      end

      it do
        should contain_file('/etc/n1kv/n1kv.conf') \
          .without_content(/^svs-mode V6/)
      end
    end

    context 'verify n1kv.conf svs-mode with non-default IPv6 address' do
      let :params do
      {
        :n1kv_vsm_ipv6 => '::3'
      }
      end

      it do
        should contain_file('/etc/n1kv/n1kv.conf') \
          .with_content(/^svs-mode V6/)
      end
    end

    context 'verify node_type' do
      let :params do
      {
        :node_type        => 'network',
      }
      end

      it do
        should contain_file('/etc/n1kv/n1kv.conf') \
          .with_content(/^node-type network/)
        should contain_file('/etc/n1kv/n1kv.conf') \
          .without_content(/^node-type compute/)
      end
    end

    context 'verify portdb' do
      let :params do
      {
        :portdb             => 'vem',
      }
      end

      it do
        should contain_file('/etc/n1kv/n1kv.conf') \
          .with_content(/^portdb vem/)
        should contain_file('/etc/n1kv/n1kv.conf') \
          .without_content(/^portdb ovs/)
      end
    end

    context 'verify fastpath_flood' do
      let :params do
      {
        :fastpath_flood     => 'disable',
      }
      end

      it do
        should contain_file('/etc/n1kv/n1kv.conf') \
          .with_content(/^fastpath-flood disable/)
        should contain_file('/etc/n1kv/n1kv.conf') \
          .without_content(/^fastpath-flood enable/)
      end
    end

    context 'verify n1kv.conf with uplinks' do
      let :params do
      {
        :uplink_profile => { 'eth1' => 'prof1',
                             'eth2' => 'prof2'
                           }
      }
      end

      it do
        should contain_file('/etc/n1kv/n1kv.conf') \
          .with_content(/^phys eth1 profile prof1/)
        should contain_file('/etc/n1kv/n1kv.conf') \
          .with_content(/^phys eth2 profile prof2/)
      end
    end

    context 'verify n1kv.conf with vtep info' do
      let :params do
      {
        :vtep_config => { 'vtep1' => { 'profile' => 'profint',
                                       'ipmode'  => 'dhcp'
                                     },
                          'vtep2' => { 'profile'   => 'profint',
                                       'ipmode'    => 'static',
                                       'ipaddress' => '192.168.1.1',
                                       'netmask'   => '255.255.255.0'
                                     }
                        }
      }
      end

      it do
        should contain_file('/etc/n1kv/n1kv.conf') \
          .with_content(/^virt vtep1 profile profint mode dhcp/)
        should contain_file('/etc/n1kv/n1kv.conf') \
          .with_content(/^virt vtep2 profile profint mode static/)
      end
    end

    context 'with manage_service as false' do
      let :params do
      {
        :manage_service => false
      }
      end

      it 'should not start/stop service' do
        should contain_service('nexus1000v').without_ensure
      end
    end

    context 'with manage_service true and enable_service false' do
      let :params do
      {
        :manage_service => true,
        :enable         => false
      }
      end

      it 'should stop service' do
        should contain_service('nexus1000v').with_ensure('stopped')
      end
    end

    context 'verify sysctl setting with vteps_in_same_subnet true' do
      let :params do
        {
          :vteps_in_same_subnet => true
        }
      end

      it do
        should contain_sysctl__value('net.ipv4.conf.default.rp_filter').with_value('2')
        should contain_sysctl__value('net.ipv4.conf.all.rp_filter').with_value('2')
        should contain_sysctl__value('net.ipv4.conf.default.arp_ignore').with_value('1')
        should contain_sysctl__value('net.ipv4.conf.all.arp_ignore').with_value('1')
        should contain_sysctl__value('net.ipv4.conf.all.arp_announce').with_value('2')
        should contain_sysctl__value('net.ipv4.conf.default.arp_announce').with_value('2')
      end
    end  
  end

  on_supported_os({
    :supported_os => OSDefaults.get_supported_os
  }).each do |os,facts|
    context "on #{os}" do
      let (:facts) do
        facts.merge!(OSDefaults.get_facts())
      end

      if facts[:osfamily] == 'RedHat'
        it_behaves_like 'neutron::agents::n1kv_vem'
      end
    end
  end
end