ba0eb6f2f6
Also need to remove installing explicit installation of openvswitch and call vswitch::ovs instead. Adding testcases to neutron_agents_n1kv_vem_spec.rb and fixing an error in neutron_plugins_ml2_spec.rb Change-Id: I2b4ada801610d7081ac3e2469bcacd6ea5ec8e7d Closes-Bug: 1421449
170 lines
4.9 KiB
Plaintext
170 lines
4.9 KiB
Plaintext
# This is the N1KV VEM configuration file.
|
|
# <n1kv.conf> file contains all the configuration parameters for VEM operation.
|
|
# Please find below a brief explanation of these parameters and their meaning.
|
|
# Optional Parameters and Default Values of parameters are explicitly stated.
|
|
# Note:
|
|
# a)Mandatory parameters are needed for proper VEM operation.
|
|
# N1KV DP/DPA should start even if these are not specified.
|
|
# But there will be functional impact. For eg: in VSM connectivity
|
|
# b)For any updates to parameters to take effect, you just need to execute
|
|
# 'vemcmd reread config'. Its the least-disruptive way for changes to
|
|
# take effect. However for certain params, n1kv service need to be restarted.
|
|
# These parameter are stated explictly (restart_on_modify: YES).
|
|
#
|
|
|
|
#
|
|
#<vsm-connection-params>
|
|
#
|
|
# TAG: switch-domain
|
|
# Description:
|
|
# Optional: No
|
|
# Default: 1000
|
|
# restart_on_modify: No
|
|
switch-domain <%= @n1kv_vsm_domain_id %>
|
|
|
|
# TAG: l3control-ipaddr
|
|
# Description: IP Address of VSM Mgmt I/F
|
|
# Optional: No
|
|
# Default: 127.0.0.1
|
|
# restart_on_modify: No
|
|
l3control-ipaddr <%= @n1kv_vsm_ip %>
|
|
|
|
# TAG: host-mgmt-intf
|
|
# Description: Management interface of the Host
|
|
# Optional: No (on N1KV, we need this
|
|
# for Host Identification on VSM).
|
|
# Default: lo
|
|
# restart_on_modify: Yes
|
|
host-mgmt-intf <%= @host_mgmt_intf %>
|
|
|
|
#<Port-Profile Mapping>
|
|
# Description: Port-Profile mapping for all VEM managed Interfaces.
|
|
# Optional: Yes
|
|
# restart_on_modify: No
|
|
#
|
|
# Note: Do not specify Host Management Interface here.
|
|
# We do yet support System Ports (Ports which need to be up all time: Post Reboot/VEM Upgrade).
|
|
#
|
|
# Format for physical ports:
|
|
# phys <port-name> profile <profile-name>
|
|
#phys eth1 profile sys-uplink
|
|
#phys eth2 profile uplink2
|
|
|
|
<% @uplink_profile.each do |port, profile| -%>
|
|
phys <%= port%> profile <%= profile%>
|
|
<% end -%>
|
|
|
|
# Format for non-vm virt ports. For instance: VTEP ports.
|
|
# virt <port-name> profile <profile-name> [mode static|dhcp] [address <ipaddr>]
|
|
# [netmask <netmask ip>] [mac <macaddr>]
|
|
# [] -->indicates optional parameters.
|
|
#Eg:
|
|
#virt vtep3 profile profint mode dhcp
|
|
#virt vtep1 profile profint mode dhcp mac 00:11:22:33:44:55
|
|
#virt vtep2 profile profint mode static address 192.168.2.91 netmask 255.255.255.0
|
|
#virt vtep2 profile profint mode static address 192.168.2.91 netmask 255.255.255.0 mac 00:22:22:33:44:55
|
|
|
|
<% @vtep_config.each do |port, params| -%>
|
|
<% if params['ipmode'] == 'dhcp' -%>
|
|
virt <%= port%> profile <%= params['profile']%> mode dhcp
|
|
<% else-%>
|
|
virt <%= port%> profile <%= params['profile']%> mode static address <%= params['ipaddress']%> netmask <%= params['netmask']%>
|
|
<% end -%>
|
|
<% end -%>
|
|
|
|
# TAG: uvem-ovs-brname
|
|
# Description: Default Open VSwitch Bridge Name
|
|
# Optional: YES.
|
|
# Default: n1kvdvs
|
|
# restart_on_modify: Yes
|
|
# Format:
|
|
# uvem-ovs-brname n1kvdvs
|
|
uvem-ovs-brname br-int
|
|
|
|
# TAG: portdb
|
|
# Description: PortDB (ovs|vem)
|
|
# Optional: YES.
|
|
# Default: ovs
|
|
# restart_on_modify: Yes
|
|
# Format:
|
|
# portdb vem
|
|
portdb <%= @portdb %>
|
|
|
|
# TAG: node-type
|
|
# Description: Type of Node: 'compute' (or) 'neutron'
|
|
# Optional: YES.
|
|
# Default: compute
|
|
# restart_on_modify: No
|
|
# Format:
|
|
# node-type compute
|
|
node-type <%= @node_type %>
|
|
|
|
# The below parameters are not commonly modified.
|
|
#
|
|
#
|
|
#<system-port-profile-Info>
|
|
# Description: System Port Profiles.
|
|
# Optional: Yes (If there are no System Interfaces: Mgmt I/F etc)
|
|
# restart_on_modify: No
|
|
#
|
|
#Trunk Profile Format
|
|
#profile <name> trunk <vlan>
|
|
#profile <name> native-vlan <vlan>
|
|
#profile <name> mtu <mtu-size>
|
|
#
|
|
#Access Profile
|
|
#profile <name> access <vlan>
|
|
#profile <name> mtu <mtu-size>
|
|
|
|
# TAG: dp-np-threads
|
|
# Description: Number of datapath threads to process normal priority packets
|
|
# Optional: YES
|
|
# Default: 4
|
|
# restart_on_modify: Yes
|
|
# Format: dp-np-threads <1..32>
|
|
|
|
# TAG: dp-lp-threads
|
|
# Description: Number of datapath threads to process low priority packets
|
|
# Optional: YES
|
|
# Default: 1
|
|
# restart_on_modify: Yes
|
|
# Format: dp-lp-threads <1..32>
|
|
|
|
# TAG: dp-hp-threads
|
|
# Description: Number of datapath threads to process high priority packets
|
|
# Optional: YES
|
|
# Default: 1
|
|
# restart_on_modify: Yes
|
|
# Format: dp-hp-threads <1..32>
|
|
|
|
# TAG: dp-thread-sockets
|
|
# Description: Number of packet sockets each datapath thread creates
|
|
# Optional: YES
|
|
# Default: 1
|
|
# restart_on_modify: Yes
|
|
# Format: dp-thread-sockets <1..16>
|
|
|
|
# TAG: dp-thread-socket-rbuflen
|
|
# Description: Receive buffer length of each packet socket
|
|
# Optional: YES
|
|
# Default: 8 MBytes
|
|
# restart_on_modify: Yes
|
|
# Format: dp-thread-socket-rbuflen <0..255>
|
|
# Note: 0 - use system default
|
|
|
|
# TAG: dp-thread-socket-rrnglen
|
|
# Description: Rx-ring length of each packet socket
|
|
# Optional: YES
|
|
# Default: 4096
|
|
# restart_on_modify: Yes
|
|
# Format: dp-thread-socket-rrnglen <0..16384>
|
|
# Note: 0 - disables memory map I/O
|
|
|
|
# TAG: fastpath-flood
|
|
# Description: Enable flood of broadcast and unknown pkts in KLM
|
|
# Optional: YES
|
|
# Default: disable
|
|
# restart_on_modify: Yes
|
|
# Format: fastpath-flood <enable|disable>
|
|
fastpath-flood <%= @fastpath_flood %>
|