========= The Rings ========= The rings determine where data should reside in the cluster. There is a separate ring for account databases, container databases, and individual objects but each ring works in the same way. These rings are externally managed, in that the server processes themselves do not modify the rings, they are instead given new rings modified by other tools. The ring uses a configurable number of bits from a path's MD5 hash as a partition index that designates a device. The number of bits kept from the hash is known as the partition power, and 2 to the partition power indicates the partition count. Partitioning the full MD5 hash ring allows other parts of the cluster to work in batches of items at once which ends up either more efficient or at least less complex than working with each item separately or the entire cluster all at once. Another configurable value is the replica count, which indicates how many of the partition->device assignments comprise a single ring. For a given partition number, each replica's device will not be in the same zone as any other replica's device. Zones can be used to group devices based on physical locations, power separations, network separations, or any other attribute that would lessen multiple replicas being unavailable at the same time. ------------ Ring Builder ------------ The rings are built and managed manually by a utility called the ring-builder. The ring-builder assigns partitions to devices and writes an optimized Python structure to a gzipped, serialized file on disk for shipping out to the servers. The server processes just check the modification time of the file occasionally and reload their in-memory copies of the ring structure as needed. Because of how the ring-builder manages changes to the ring, using a slightly older ring usually just means one of the three replicas for a subset of the partitions will be incorrect, which can be easily worked around. The ring-builder also keeps its own builder file with the ring information and additional data required to build future rings. It is very important to keep multiple backup copies of these builder files. One option is to copy the builder files out to every server while copying the ring files themselves. Another is to upload the builder files into the cluster itself. Complete loss of a builder file will mean creating a new ring from scratch, nearly all partitions will end up assigned to different devices, and therefore nearly all data stored will have to be replicated to new locations. So, recovery from a builder file loss is possible, but data will definitely be unreachable for an extended time. ------------------- Ring Data Structure ------------------- The ring data structure consists of three top level fields: a list of devices in the cluster, a list of lists of device ids indicating partition to device assignments, and an integer indicating the number of bits to shift an MD5 hash to calculate the partition for the hash. *************** List of Devices *************** The list of devices is known internally to the Ring class as devs. Each item in the list of devices is a dictionary with the following keys: ====== ======= ============================================================== id integer The index into the list devices. zone integer The zone the devices resides in. weight float The relative weight of the device in comparison to other devices. This usually corresponds directly to the amount of disk space the device has compared to other devices. For instance a device with 1 terabyte of space might have a weight of 100.0 and another device with 2 terabytes of space might have a weight of 200.0. This weight can also be used to bring back into balance a device that has ended up with more or less data than desired over time. A good average weight of 100.0 allows flexibility in lowering the weight later if necessary. ip string The IP address of the server containing the device. port int The TCP port the listening server process uses that serves requests for the device. device string The on disk name of the device on the server. For example: sdb1 meta string A general-use field for storing additional information for the device. This information isn't used directly by the server processes, but can be useful in debugging. For example, the date and time of installation and hardware manufacturer could be stored here. ====== ======= ============================================================== Note: The list of devices may contain holes, or indexes set to None, for devices that have been removed from the cluster. Generally, device ids are not reused. Also, some devices may be temporarily disabled by setting their weight to 0.0. To obtain a list of active devices (for uptime polling, for example) the Python code would look like: ``devices = [device for device in self.devs if device and device['weight']]`` ************************* Partition Assignment List ************************* This is a list of array('H') of devices ids. The outermost list contains an array('H') for each replica. Each array('H') has a length equal to the partition count for the ring. Each integer in the array('H') is an index into the above list of devices. The partition list is known internally to the Ring class as _replica2part2dev_id. So, to create a list of device dictionaries assigned to a partition, the Python code would look like: ``devices = [self.devs[part2dev_id[partition]] for part2dev_id in self._replica2part2dev_id]`` That code is a little simplistic, as it does not account for the removal of duplicate devices. If a ring has more replicas than devices, then a partition will have more than one replica on one device; that's simply the pigeonhole principle at work. array('H') is used for memory conservation as there may be millions of partitions. ******************* Fractional Replicas ******************* A ring is not restricted to having an integer number of replicas. In order to support the gradual changing of replica counts, the ring is able to have a real number of replicas. When the number of replicas is not an integer, then the last element of _replica2part2dev_id will have a length that is less than the partition count for the ring. This means that some partitions will have more replicas than others. For example, if a ring has 3.25 replicas, then 25% of its partitions will have four replicas, while the remaining 75% will have just three. ********************* Partition Shift Value ********************* The partition shift value is known internally to the Ring class as _part_shift. This value used to shift an MD5 hash to calculate the partition on which the data for that hash should reside. Only the top four bytes of the hash is used in this process. For example, to compute the partition for the path /account/container/object the Python code might look like: ``partition = unpack_from('>I', md5('/account/container/object').digest())[0] >> self._part_shift`` For a ring generated with part_power P, the partition shift value is 32 - P. ----------------- Building the Ring ----------------- The initial building of the ring first calculates the number of partitions that should ideally be assigned to each device based the device's weight. For example, given a partition power of 20, the ring will have 1,048,576 partitions. If there are 1,000 devices of equal weight they will each desire 1,048.576 partitions. The devices are then sorted by the number of partitions they desire and kept in order throughout the initialization process. Note: each device is also assigned a random tiebreaker value that is used when two devices desire the same number of partitions. This tiebreaker is not stored on disk anywhere, and so two different rings created with the same parameters will have different partition assignments. For repeatable partition assignments, ``RingBuilder.rebalance()`` takes an optional seed value that will be used to seed Python's pseudo-random number generator. Then, the ring builder assigns each replica of each partition to the device that desires the most partitions at that point while keeping it as far away as possible from other replicas. The ring builder prefers to assign a replica to a device in a regions that has no replicas already; should there be no such region available, the ring builder will try to find a device in a different zone; if not possible, it will look on a different server; failing that, it will just look for a device that has no replicas; finally, if all other options are exhausted, the ring builder will assign the replica to the device that has the fewest replicas already assigned. Note that assignment of multiple replicas to one device will only happen if the ring has fewer devices than it has replicas. When building a new ring based on an old ring, the desired number of partitions each device wants is recalculated. Next the partitions to be reassigned are gathered up. Any removed devices have all their assigned partitions unassigned and added to the gathered list. Any partition replicas that (due to the addition of new devices) can be spread out for better durability are unassigned and added to the gathered list. Any devices that have more partitions than they now desire have random partitions unassigned from them and added to the gathered list. Lastly, the gathered partitions are then reassigned to devices using a similar method as in the initial assignment described above. Whenever a partition has a replica reassigned, the time of the reassignment is recorded. This is taken into account when gathering partitions to reassign so that no partition is moved twice in a configurable amount of time. This configurable amount of time is known internally to the RingBuilder class as min_part_hours. This restriction is ignored for replicas of partitions on devices that have been removed, as removing a device only happens on device failure and there's no choice but to make a reassignment. The above processes don't always perfectly rebalance a ring due to the random nature of gathering partitions for reassignment. To help reach a more balanced ring, the rebalance process is repeated until near perfect (less 1% off) or when the balance doesn't improve by at least 1% (indicating we probably can't get perfect balance due to wildly imbalanced zones or too many partitions recently moved). ------- History ------- The ring code went through many iterations before arriving at what it is now and while it has been stable for a while now, the algorithm may be tweaked or perhaps even fundamentally changed if new ideas emerge. This section will try to describe the previous ideas attempted and attempt to explain why they were discarded. A "live ring" option was considered where each server could maintain its own copy of the ring and the servers would use a gossip protocol to communicate the changes they made. This was discarded as too complex and error prone to code correctly in the project time span available. One bug could easily gossip bad data out to the entire cluster and be difficult to recover from. Having an externally managed ring simplifies the process, allows full validation of data before it's shipped out to the servers, and guarantees each server is using a ring from the same timeline. It also means that the servers themselves aren't spending a lot of resources maintaining rings. A couple of "ring server" options were considered. One was where all ring lookups would be done by calling a service on a separate server or set of servers, but this was discarded due to the latency involved. Another was much like the current process but where servers could submit change requests to the ring server to have a new ring built and shipped back out to the servers. This was discarded due to project time constraints and because ring changes are currently infrequent enough that manual control was sufficient. However, lack of quick automatic ring changes did mean that other parts of the system had to be coded to handle devices being unavailable for a period of hours until someone could manually update the ring. The current ring process has each replica of a partition independently assigned to a device. A version of the ring that used a third of the memory was tried, where the first replica of a partition was directly assigned and the other two were determined by "walking" the ring until finding additional devices in other zones. This was discarded as control was lost as to how many replicas for a given partition moved at once. Keeping each replica independent allows for moving only one partition replica within a given time window (except due to device failures). Using the additional memory was deemed a good tradeoff for moving data around the cluster much less often. Another ring design was tried where the partition to device assignments weren't stored in a big list in memory but instead each device was assigned a set of hashes, or anchors. The partition would be determined from the data item's hash and the nearest device anchors would determine where the replicas should be stored. However, to get reasonable distribution of data each device had to have a lot of anchors and walking through those anchors to find replicas started to add up. In the end, the memory savings wasn't that great and more processing power was used, so the idea was discarded. A completely non-partitioned ring was also tried but discarded as the partitioning helps many other parts of the system, especially replication. Replication can be attempted and retried in a partition batch with the other replicas rather than each data item independently attempted and retried. Hashes of directory structures can be calculated and compared with other replicas to reduce directory walking and network traffic. Partitioning and independently assigning partition replicas also allowed for the best balanced cluster. The best of the other strategies tended to give +-10% variance on device balance with devices of equal weight and +-15% with devices of varying weights. The current strategy allows us to get +-3% and +-8% respectively. Various hashing algorithms were tried. SHA offers better security, but the ring doesn't need to be cryptographically secure and SHA is slower. Murmur was much faster, but MD5 was built-in and hash computation is a small percentage of the overall request handling time. In all, once it was decided the servers wouldn't be maintaining the rings themselves anyway and only doing hash lookups, MD5 was chosen for its general availability, good distribution, and adequate speed.