vmware-nsx/vmware_nsx_tempest/config.py
AvnishPal e5b608ac1d Fix tempest.conf generation
[service_available] is not being generated. This patch fixes it.

Change-Id: I2813ff9c483b5bc97600d2b33decfcff9b3bda33
Closes-Bug: #1613542
2016-08-23 15:01:20 +05:30

162 lines
6.5 KiB
Python

# Licensed under the Apache License, Version 2.0 (the "License"); you may
# not use this file except in compliance with the License. You may obtain
# a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations
# under the License.
from oslo_config import cfg
from tempest import config
service_available_group = cfg.OptGroup(name="service_available",
title="Available OpenStack Services")
ServiceAvailableGroup = [
cfg.BoolOpt("vmware_nsx",
default=True,
help="Whether or not vmware_nsx is expected to be available"),
]
scenario_group = config.scenario_group
ScenarioGroup = [
cfg.FloatOpt('waitfor_disassoc',
default=15.0,
help="Wait for seconds after disassociation."),
cfg.FloatOpt('waitfor_assoc',
default=5.0,
help="Waitfor seconds after association."),
cfg.FloatOpt('waitfor_connectivity',
default=120.0,
help="Wait for seconds to become connected."),
cfg.ListOpt('outside_world_servers',
default=["8.8.8.8", "8.8.4.4"],
help="List of servers reside outside of openstack env."
" which is used to test default gateway behavior"
" when VMs are under logical routers,"
" & DNS are local to provider's settings."),
cfg.DictOpt('flat_alloc_pool_dict',
default={},
help="Define flat network ip range."
" required attributes are gateway, start, end"
" and cidr. Example value: gateway:10.1.1.253,"
" start:10.1.1.30,end:10.1.1.49,cidr=10.1.1.0/24"),
cfg.DictOpt('xnet_multiple_subnets_dict',
default={},
help="External network with multiple subnets."
" The primary subnet ip-range will be shrinked,"
" This is for the 2nd subnet, required attrs:"
" start:10.1.1.31,end:10.1.1.33,cidr=10.1.2.0/24"
" AND limit to only 3 ip addresses defined."),
]
network_group = config.network_group
NetworkGroup = [
cfg.StrOpt('l2gw_switch',
default='',
help="Distributed Virtual Portgroup to create VLAN port."),
cfg.DictOpt('l2gw_switch_dict',
default={},
help="dict version of l2gw_switch:"
"device_name:,interfaces:,segmentation_id:,"),
cfg.StrOpt('dns_search_domain',
default='vmware.com',
help="a valid domain that contains host defined at"
" attribute host_in_search_domain"),
cfg.StrOpt('host_in_search_domain',
default='mail',
help="host exists in dns_search_domain"),
cfg.StrOpt('public_network_cidr',
help="Public network cidr which provides external network"
" connectivity"),
]
nsxv_group = cfg.OptGroup(name='nsxv',
title="NSX-v Configuration Options")
NSXvGroup = [
cfg.StrOpt('manager_uri',
default='https://10.0.0.10',
help="NSX-v manager ip address"),
cfg.StrOpt('user',
default='admin',
help="NSX-v manager username"),
cfg.StrOpt('password',
default='default',
help="NSX-v manager password"),
cfg.StrOpt('vdn_scope_id',
default='vdnscope-1',
help="NSX-v vdn scope id"),
cfg.IntOpt('max_mtz',
default=3,
help="Max Multiple Transport Zones used for testing."),
cfg.DictOpt('flat_alloc_pool_dict',
default={},
help=" Define flat network ip range."
" required attributes are gateway, start, end"
" and cidr. Example value: gateway:10.1.1.253,"
" start:10.1.1.30,end:10.1.1.49,cidr=10.1.1.0/24"),
cfg.StrOpt('vlan_physical_network',
default='',
help="physval_network to create vlan."),
cfg.IntOpt('provider_vlan_id',
default=888,
help="The default vlan_id for admin vlan."),
cfg.BoolOpt('no_router_type',
default=False,
help="router_type is NSXv extension."
"Set it to True allow tests to remove this attribute"
" when creating router."),
]
l2gw_group = cfg.OptGroup(name='l2gw',
title="l2-gateway Configuration Options")
L2gwGroup = [
cfg.DictOpt('vlan_subnet_ipv4_dict',
default={},
help="Tenant's VLAN subnet cdir to connect to l2gw/VXLAN."
" Example: cidr=192.168.99.0/24,start:192.168.99.41"
" ,end:192.168.99.50,gateway=192.168.99.253"),
cfg.StrOpt('device_one_vlan',
default="",
help="l2g2 device with one VLAN"
" l2gw-1::dvportgroup-14420|3845"),
cfg.StrOpt('device_multiple_vlans',
default="",
help="l2gw device with multiple VLANs"
" l2gw-x::dvportgroup-14429|3880#3381#3382"),
cfg.StrOpt('multiple_interfaces_multiple_vlans',
default="",
help="l2gw multiple devices, interface has multiple VLANs"
" m-ifs::dvportgroup-144|138#246;dvportgroup-155|339"),
cfg.StrOpt('vlan_1',
default="16",
help="VLAN id"),
cfg.StrOpt('vlan_2',
default="17",
help="VLAN id"),
cfg.StrOpt("subnet_1_cidr",
default="192.168.1.0/24",
help="Subnet 1 network cidr."
"Example: 1.1.1.0/24"),
]
nsxv3_group = cfg.OptGroup(name='nsxv3',
title="NSXv3 Configuration Options")
NSXv3Group = [
cfg.StrOpt('nsx_manager',
default='',
help="NSX manager IP address"),
cfg.StrOpt('nsx_user',
default='admin',
help="NSX manager username"),
cfg.StrOpt('nsx_password',
default='default',
help="NSX manager password"),
]