7c01efdac2
This changes links that point to the old install guide, to point to the new install guide. Change-Id: I3f92664afc1332468c1863bce8dc8675c972261d
95 lines
3.4 KiB
ReStructuredText
95 lines
3.4 KiB
ReStructuredText
.. _CIMC:
|
|
|
|
============
|
|
CIMC drivers
|
|
============
|
|
|
|
Overview
|
|
========
|
|
The CIMC drivers are targeted for standalone Cisco UCS C series servers.
|
|
These drivers enable you to take advantage of CIMC by using the
|
|
python SDK.
|
|
|
|
``pxe_iscsi_cimc`` driver uses PXE boot + iSCSI deploy (just like ``pxe_ipmitool``
|
|
driver) to deploy the image and uses CIMC to do all management operations on
|
|
the baremetal node (instead of using IPMI).
|
|
|
|
``pxe_agent_cimc`` driver uses PXE boot + Agent deploy (just like ``agent_ipmitool``
|
|
and ``agent_ipminative`` drivers.) to deploy the image and uses CIMC to do all
|
|
management operations on the baremetal node (instead of using IPMI). Unlike with
|
|
iSCSI deploy in Agent deploy, the ramdisk is responsible for writing the image to
|
|
the disk, instead of the conductor.
|
|
|
|
The CIMC drivers can use the Ironic Inspector service for in-band inspection of
|
|
equipment. For more information see the `Ironic Inspector documentation
|
|
<http://docs.openstack.org/developer/ironic-inspector/>`_.
|
|
|
|
Prerequisites
|
|
=============
|
|
|
|
* ``ImcSdk`` is a python SDK for the CIMC HTTP/HTTPS XML API used to control
|
|
CIMC.
|
|
|
|
Install the ``ImcSdk`` module
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
.. note::
|
|
|
|
Install the ``ImcSdk`` module on the Ironic conductor node. Required version is
|
|
0.7.2.
|
|
|
|
#. Install it::
|
|
|
|
$ pip install "ImcSdk>=0.7.2"
|
|
|
|
Tested Platforms
|
|
~~~~~~~~~~~~~~~~
|
|
This driver works with UCS C-Series servers and has been tested with:
|
|
|
|
* UCS C240M3S
|
|
|
|
Configuring and Enabling the driver
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
1. Add ``pxe_iscsi_cimc`` and/or ``pxe_agent_cimc`` to the list of ``enabled_drivers`` in
|
|
``/etc/ironic/ironic.conf``. For example::
|
|
|
|
enabled_drivers = pxe_ipmitool,pxe_iscsi_cimc,pxe_agent_cimc
|
|
|
|
2. Restart the Ironic conductor service:
|
|
|
|
For Ubuntu/Debian systems::
|
|
|
|
$ sudo service ironic-conductor restart
|
|
|
|
or for RHEL/CentOS/Fedora::
|
|
|
|
$ sudo systemctl restart openstack-ironic-conductor
|
|
|
|
Registering CIMC Managed UCS node in Ironic
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
Nodes configured for CIMC driver should have the ``driver`` property set to
|
|
``pxe_iscsi_cimc`` or ``pxe_agent_cimc``. The following configuration values are
|
|
also required in ``driver_info``:
|
|
|
|
- ``cimc_address``: IP address or hostname for CIMC
|
|
- ``cimc_username``: CIMC login user name
|
|
- ``cimc_password``: CIMC login password for the above CIMC user.
|
|
- ``deploy_kernel``: Identifier for the deployment kernel e.g. a Glance UUID
|
|
- ``deploy_ramdisk``: Identifier for the deployment ramdisk e.g. a Glance UUID
|
|
|
|
The following sequence of commands can be used to enroll a UCS Standalone node.
|
|
|
|
Create Node::
|
|
|
|
ironic node-create -d <pxe_iscsi_cimc OR pxe_agent_cimc> -i cimc_address=<CIMC hostname OR ip-address> -i cimc_username=<cimc_username> -i cimc_password=<cimc_password> -i deploy_kernel=<glance_uuid_of_deploy_kernel> -i deploy_ramdisk=<glance_uuid_of_deploy_ramdisk> -p cpus=<number_of_cpus> -p memory_mb=<memory_size_in_MB> -p local_gb=<local_disk_size_in_GB> -p cpu_arch=<cpu_arch>
|
|
|
|
The above command 'ironic node-create' will return UUID of the node, which is the value of $NODE in the following command.
|
|
|
|
Associate port with the node created::
|
|
|
|
ironic port-create -n $NODE -a <MAC_address_of_Ucs_server's_NIC>
|
|
|
|
For more information about enrolling nodes see `Enrolling a node`_ in the install guide.
|
|
|
|
.. _`Enrolling a node`: http://docs.openstack.org/project-install-guide/baremetal/draft/enrollment.html#enrolling-a-node
|